Installation position determination of wind speed sensors on steel pole along a high-speed railway

In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.

Effect of Nb addition on microstructure and mechanical properties of 25CrNiMoV(DZ2)steel for high-speed railway axles

The microstructure,precipitates and properties of 25CrNiMoV(DZ2)steel for high-speed railway axles with different Nb contents were investigated by means of optical microscopy,scanning electron microscopy,electron back-scattering diffraction,transmission electron microscopy and physicochemical phase analysis.The results show that the grain size of the original austenite of the test steels decreases from 20.5 to 14.2 and 10.8μm after adding 0.026 and 0.039 wt.%Nb to a 25CrNiMoV steel,respectively.Moreover,the block width of the tempered martensite in the test steels is refined from 1.91 to 1.72 and 1.60µm,respectively.MC-type precipitates in 25CrNiMoV steel are mainly VC,while(Nb,V)C gradually precipitates when Nb is microalloyed,and the amount of precipitates increases with increasing Nb content.Through strengthening mechanism analysis,it is found that grain refinement strengthening is the primary way to increase the strength.The improvement in the yield strength with increasing Nb content is attributed to a significant increase in precipitation strengthening,grain refinement strengthening and dislocation strengthening.

Effect of cerium on the cleanliness of spring steel used in fastener of high-speed railway

The effects of Ce addition on the quantity, size, distribution of inclusions and the content of oxygen, sulfur and other hazardous residual elements in spring steel used as fastener in high speed railway were investigated by metallographic examination, SEM-EDS and composition analysis. The results indicated that the contents of oxygen decreased with the addition of Ce （[Ce]〈0.1%） and the content of sulfur continually decreased with increasing content of Ce （[Ce]〈1.2%）. However, with the further increase of Ce element addition, the content of [O] and T[O] began to increase. The content of Ce corresponding to the lowest [O] and T[O] lied in the range of 0.10%-0.13%and 0.045%-0.065%, respectively. The addition of Ce in spring steel resulted in the formation of rare earth oxides/oxysulfides and decreased the size of inclusions to less than 3μm in globular or spheroid shape. Moreover, the residual harmful elements （As, P, Pb and Sn） were found to exist in the Ce-containing inclusions, which had proved that the Ce addition could capture the residual elements and suppress their precipitation behaviors in the grain boundary.

Smart elasto-magneto-electric (EME) sensors for stress monitoring of steel structures in railway infrastructures

Steel structures are widely used in railway infrastructures.Their stress state is the most important determinant of the safety of these structures.The elasto-magnetic (EM) sensor is the most promising for stress monitoring of in-service steel structures.Nevertheless,the necessity of magnetic excitation to saturation due to the use of a secondary coil for signal detection,keeps from its engineering application.In this paper,a smart elasto-magneto-electric (EME) sensor using magneto-electric (ME) sensing units to take the place of the secondary coil has been exploited for the first time.The ME sensing unit is made of ME laminated composites,which has an ultrahigh ME voltage coefficient and can measure the magnetic induction simply and precisely.Theoretical analysis and characterization experiments firstly conducted on the ME laminated composites showed that the ME sensing units can be applied in the EM sensor for improved performance in stress monitoring.A tension test of a steel bar was carried out to characterize our smart EME sensor and the results showed high accuracy and sensitivity.The present smart EME sensor is a promising tool for stress monitoring of steel structures in railway and other civil infrastructures.