Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures

Compared with the conventional Charpy impact test method,the oscillographic impact test can help in the behavioral analysis of materials during the fracture process.In this study,the trade-off relationship between the strength and toughness of a DZ2 axle steel at various tempering temperatures and the cause of the improvement in impact toughness was evaluated.The tempering process dramatically influenced carbide precipitation behavior,which resulted in different aspect ratios of carbides.Impact toughness improved along with the rise in tempering temperature mainly due to the increase in energy required in impact crack propagation.The characteristics of the impact crack propagation process were studied through a comprehensive analysis of stress distribution,oscilloscopic impact statistics,fracture morphology,and carbide morphology.The poor impact toughness of low-tempering-temperature specimens was attributed to the increased number of stress concentration points caused by carbide morphology in the small plastic zone during the propagation process,which resulted in a mixed distribution of brittle and ductile fractures on the fracture surface.

Effect of Nb addition on microstructure and mechanical properties of 25CrNiMoV(DZ2)steel for high-speed railway axles

The microstructure,precipitates and properties of 25CrNiMoV(DZ2)steel for high-speed railway axles with different Nb contents were investigated by means of optical microscopy,scanning electron microscopy,electron back-scattering diffraction,transmission electron microscopy and physicochemical phase analysis.The results show that the grain size of the original austenite of the test steels decreases from 20.5 to 14.2 and 10.8μm after adding 0.026 and 0.039 wt.%Nb to a 25CrNiMoV steel,respectively.Moreover,the block width of the tempered martensite in the test steels is refined from 1.91 to 1.72 and 1.60µm,respectively.MC-type precipitates in 25CrNiMoV steel are mainly VC,while(Nb,V)C gradually precipitates when Nb is microalloyed,and the amount of precipitates increases with increasing Nb content.Through strengthening mechanism analysis,it is found that grain refinement strengthening is the primary way to increase the strength.The improvement in the yield strength with increasing Nb content is attributed to a significant increase in precipitation strengthening,grain refinement strengthening and dislocation strengthening.

DETERMINATION OF CLOSURE EFFECT IN FATIGUE CRACKING BY MEANS OF COMPLIANCE TECHNIQUE AND NUMERICAL METHOD

The crack tip strain gauge method in the compliance technique was used to determine the opening load of notched crack of axle steel,and the nonlinear finite element ADINA program, to which the cyclic stress-strain curve of axle steel was applied,was used to analyze the stress-strain field ahead of the crack tip and the opening load of notched crack.The results of both the compliance technique and the numerical method were in good agreement.In this pa- per,the concept of the sensitive point is proposed and the key to the determination of the crack opening load in the experiment is to place a strain gauge at sensitive point.It is certified by both experimental and numerical methods that the sensitive point has the best linear relation- ship character and the value of strain is much greater.

Fatigue Properties Improvement of Low-Carbon Alloy Axle Steel by Induction Hardening and Shot Peening:A Prospective Comparison

Fatigue fracture is the major threat to the railway axle, which can be avoided or delayed by surface strengthening. In this study, a low-carbon alloy axle steel with two states was treated by surface induction hardening and shot peening, respectively, to reveal the mechanism of fatigue property improvement by microstructure characterization, microhardness measurement, residual stress analysis, roughness measurement, and rotary bending fatigue tests. The results indicate that both quenching and tempering treatment can effectively improve the fatigue properties of the modified axle steel. In addition, induction hardening can create an ideal hardened layer on the sample surface by phase transformation from the microstructure of ferrite and pearlite to martensite. By comparison, shot peening can modify the microstructure in surface layer by surface severe plastic deformation introducing a large number of dislocation and even cause grain refinement. Both induction hardening and shot peening create compressive residual stress into the surface layer of axle steel sample, which can effectively reduce the stress level applied to the metal surface during the rotary bending fatigue tests. On the whole, the contribution of induction hardening to the fatigue life of axle steel sample is better than that of the shot peening, and induction hardening shows obvious advantages in improving the fatigue life of axle steel.