Real-Time 4-Mode MDM Transmission Using Commercial 400G OTN Transceivers and All-Fiber Mode Multiplexers

Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low insertion loss and modal crosstalk are the key components.In this paper,a low-modal-crosstalk 4-mode MMUX/MDEMUX for the weakly-coupled triple-ring-core few-mode fiber(TRC-FMF)is designed and fabricated with side-polishing processing.The measurement results show that a pair of MMUX/MDEMUX and 25 km weakly-coupled TRC-FMF MDM link achieve low modal crosstalk of lower than−17.5 dB and insertion loss of lower than 11.56 dB for all the four modes.Based on the TRC-FMF and all-fiber MMUX/MDEMUX,an experiment for 25 km real-time 4-mode 3-λwavelength division multiplexing(WDM)-MDM transmission is conducted using commercial 400G optical transport network(OTN)transceivers.The experimental results prove weakly-coupled MDM techniques facilitate a smooth upgrade of the optical transmission system.

Mode Selection for CoMP Transmission with Nonideal Synchronization

This paper proposes a mode selection scheme to improve the spectral efficiency for coordinated multi-point(CoMP) transmission with phase synchronization errors(PSE). Upper bounds of average achievable rate for different CoMP transmission modes, such as coordinated beamforming(CB) and joint processing(JP), are derived by random matrix theory and asymptotic mathematical approximation. According to these upper bounds, the proposed scheme switches CoMP transmission mode between CB and JP adaptively to enhance the average achievable rate. Simulation results show that these upper bounds agree well with the average achievable rates for both JP and CB, and the proposed scheme outperforms traditional single mode CoMP transmission when PSE exist.

Optimization Transmission Efficiency with Driver Intention for Automotive Continuously Variable Transmission under Slip Mode

This study proposes and experimentally validates an optimal integrated system to control the automotive continuously variable transmission(CVT)by Model Predictive Control(MPC)to achieve its expected transmission efficiency range.The control system framework consists of top and bottom layers.In the top layer,a driving intention recognition system is designed on the basis of fuzzy control strategy to determine the relationship between the driver intention and CVT target ratio at the corresponding time.In the bottom layer,a new slip state dynamic equation is obtained considering slip characteristics and its related constraints,and a clamping force bench is established.Innovatively,a joint controller based on model predictive control(MPC)is designed taking internal combustion engine torque and slip between the metal belt and pulley as optimization dual targets.A cycle is attained by solving the optimization target to achieve optimum engine torque and the input slip in real-time.Moreover,the new controller provides good robustness.Finally,performance is tested by actual CVT vehicles.Results show that compared with traditional control,the proposed control improves vehicle transmission efficiency by approximately 9.12%-9.35%with high accuracy.

Analysis Method and Principle of Dual-mode Electro-mechanical Variable Transmission Program

Automotive industry,as an important pillar of the national economy,has been rapidly developing in recent years.But proplems such as energy comsumption and environmental pollution are posed at the same time.Electro-mechanical variable transmission system is considered one of avilable workarounds.It is brought forward a kind of design methods of dual-mode electro-mechanical variable transmission system rotational speed characteristics and dual-mode drive diagrams.With the motor operating behavior of running in four quadrants and the speed characteristics of the simple internal and external meshing single planetary gear train,four kinds of dual-mode electro-mechanical transmission system scheme are designed.And the velocity,torque and power characteristics of one of the programs are analyzed.The magnitude of the electric split-flow power is an important factor which influences the system performance,so in the parameters matching design,it needs to reduce the power needs under the first mode of the motor.The motor,output rotational speed range and the position of the mode switching point have relationships with the characteristics design of the planetary gear set.The analysis method is to provide a reference for hybrid vehicles＇ design.As the involved rotational speed and torque relationships are the natural contact of every part of transmission system,a theory basis of system program and performance analysis is provided.

Improvement of photoemission performance of a gradient-doping transmission-mode GaAs photocathode

Two types of transmission-mode GaAs photocathodes grown by molecular beam epitaxy are compared in terms of activation process and spectral response, one has a gradient-doping structure and the other has a uniform-doping structure. The experimental results show that the gradient-doping photocathode can obtain a higher photoemission capability than the uniform-doping one. As a result of the downward graded band-bending structure, the cathode performance parameters, such as the electron average diffusion length and the surface electron escape probability obtained by fitting quantum yield curves, are greater for the gradient-doping photocathode. The electron diffusion length is within a range of from 2.0 to 5.4μm for doping concentration varying from 10^19 to 10^18 cm^-3 and the electron average diffusion length of the gradient-doping photocathode achieves 3.2 μm.

Comparison of blue–green response between transmission-mode GaAsP-and GaAs-based photocathodes grown by molecular beam epitaxy

In order to develop the photodetector for effective blue-green response, the 18-mm-diameter vacuum image tube combined with the transmission-mode Alo.7Gao.3Aso.9Po.1/GaAso.9Po.1 photocathode grown by molecular beam epitaxy is tentatively fabricated. A comparison of photoelectric property, spectral characteristic and performance parameter be- tween the transmission-mode GaAsP-based and blue-extended GaAs-based photocathodes shows that the GaAsP-based photocathode possesses better absorption and higher quantum efficiency in the blue-green waveband, combined with a larger surface electron escape probability. Especially, the quantum efficiency at 532 nm for the GaAsP-based photocathode achieves as high as 59%, nearly twice that for the blue-extended GaAs-based one, which would be more conducive to the underwater range-gated imaging based on laser illumination. Moreover, the simulation results show that the favorable blue-green response can be achieved by optimizing the emission-layer thickness in a range of 0.4 μm-0.6 μm.

Magnetically insulated transmission line oscillator oscillated in a modified HEM_(11) mode

This paper puts forward a novel magnetically insulated transmission line oscillator （MILO） for the first time which takes a modified HEM11 mode as its main interaction mode. The excitation of the oscillation mode is made possible by carefully adjusting the arrangements of each resonant cavity in a two-dimensional （2-D） slow wave structure. The high frequency characteristics are analyzed and a PIC simulation is carried out; the detailed results are discussed to get a better understanding of this new MILO. Employing an electron beam of about 441 kV and 39.7 kA, it finds that the modified HEM11 mode MILO generates a high power microwave output of about 1.47 GW at 1.45 GHz. The power conversion efficiency is about 8.4% and the generated microwave is in a TEll-like circularly polarized mode; its polarization direction is decided by the rotation direction of the SWS.

HEM_(11) mode magnetically insulated transmission line oscillator:Simulation and experiment

A novel magnetically insulated transmission line oscillator （MILO） in which a modified HEM11 mode is taken as its main interaction mode （HEM11 mode MILO） is simulated and experimented in this paper. The excitation of the oscillation mode is made possible by carefully adjusting the arrangement of each resonant cavity in a two-dimensional slow wave structure. The special feature of such a device is that in the slow-wave-structure region, the interaction mode is HEM11 mode which is a TM-like one that could interact with electron beams effectively; and in the coaxial output region, the microwave mode is TE11 mode which has a favourable field density pattern to be directly radiated. Employing an electron beam of about 441 kV and 39.7 kA, the HEM11 mode MILO generates a high power microwave output of about 1.47 GW at 1.45 GHz in particle-in-cell simulation. The power conversion efficiency is about 8.4 % and the generated microwave is in a TEll-like circular polarization mode. In a preliminary experiment investigation, high power microwave is detected from the device with a frequency of 1.46 GHz, an output energy of 43 J 47 J, and a pulse duration of 44 ns-49 ns when the input voltage is 430 kV450 kV, and the diode current is 37 kA-39 kA.

On selecting transmission mode for D2D transmitter in underlay cellular network with a multi-antenna base station

The Device-to-Device(D2D)communication underlaying cellular networks is considered in this study.The D2D transmitter in the D2D mode can directly transmit messages to a receiver,but it may interfere with the transmission of another cellular user who shares the same uplink channel.The transmitter can also operate in a cellular mode in which no interference to another cellular user occurs.We propose a mode selection scheme that aims to minimize the transmission power of the D2D transmitter subject to constraints on the minimum required data rate and maximum interference to other cellular users.The proposed scheme is based on bounds for transmission power and is less complex than the optimal scheme.Furthermore,it requires only a few statistics and does not need a fading channel distribution.The performance of the scheme is close to optimum when the number of Base Station(BS)antennas is large,and the mean absolute deviation of the fading terms is small.We verify this with numerical results of the Rician and Rayleigh fading channels by assuming that the BS antennas are independent.The simulation results for the two correlated BS antennas are presented herein.

Digital television transmission based on asynchronous transfer mode

This paper introduces a method to realize digital television transmission based on asynchronous transfer mode (ATM), a technology based on fast packet switching. Choosing the integral multiple length of an ATM cell payload to equal to the length of an MPEG transport stream packet, an MPEG transport stream packet can be inextenso loaded by several ATM cells and trans-formed into ATM cells. Using ATM virtual connection technology and B-ISDN, the interoperability between ATM and DTV may be realized, and DTV signal transmission may also be realized finally.

Multichannel Adaptive Polarization Mode Dispersion Compensation with One Compensator in Dense Wavelength Division Multiplexing Transmission Systems

A simple two-section polarization mode dispersion(PMD) compensator is proposed for multichannel PMD compensation, which can compensate two or even more channels simultaneously. Because of the statistical characteristics and the frequency-dependence of PMD, for current single mode fiber with moderate PMD, the probability that all channels are severely degraded at the same time is extremely small, which makes it possible to compensate a dense wavelength division multiplexing(DWDM) transmission system with moderate PMD using this compensator. It is shown that the outage probability of a 40×43 Gb/s DWDM transmission system using this compensator is decreased significantly from 3.6×10-3 to 3.6×10-5.

Spectral transmittance and module structure fitting for transmission-mode GaAs photocathodes

A transmission-mode GaAs photocathode includes four layers of glass, Si3N4, Gal-xAlxAs and GaAs. A gradientdoping photocathode sample was obtained by molecular beam epitaxy and its transmittance was measured by spectrophotometer from 600 nm to 1100 nm. The theoretical transmittance is derived and simulated based on the matrix formula for thin film optics. The simulation results indicate the influence of the transition layers and the three thin-film layers except glass on the transmittance spectra. In addition, a fitting coefficient needed for error modification enters into the fitted formula. The fitting results show that the relative error in the full spectrum reduces from 19.51% to 4.35% after the formula is modified. The coefficient and the thicknesses are gained corresponding to the minimum relative error, meanwhile each layer and total thin-film thickness deviation in the module can be controlled within 73. The presence of glass layer roughness, layer interface effects and surface oxides is interpreted on the modification.

The optimal thickness of a transmission-mode GaN photocathode

A 150-nm-thick CaN photocathode with a Mg doping concentration of 1.6 × 1017 cm-3 is activated by Cs/O in an ultrahigh vacuum chamber, and a quantum efficiency （QE） curve of the negative electron affinity transmission-mode （t-mode） of the GaN photocathode is obtained. The maximum QE reaches 13.0% at 290 nm. According to the t-mode QE equation solved from the diffusion equation, the QE curve is fitted. From the fitting results, the electron escape probability is 0.32, the back-interface recombination velocity is 5 ×104 cm. s^-1, and the electron diffusion length is 116 nm. Based on these parameters, the influence of CaN thickness on t-mode QE is simulated. The simulation shows that the optimal thickness of GaN is 90 nm, which is better than the 150-nm GaN.

Reliability Analysis of Hydraulic Transmission Oil Supply System of Power-Shift Steering Transmission with GO Methodology

GO methodology is a success-oriented method for system reliability analysis. There are components with multi-fault modes in repairable systems. It is a problem to use the existing GO method to make reliability analysis of such repairable systems. A new GO method for reliability analysis of such repairable systems with multifault modes was presented. Firstly, calculation equations of reliability parameters of operators which were used to describe components with multi-fault modes in reparable systems were derived based on Markov process theory. Then, this new GO method was applied in reliability analysis of a hydraulic transmission oil supply system( HTOSS) of a power-shift steering transmission at low and high speeds. Finally,Compared with fault tree analysis( FTA) and Monte Carlo simulation,the results show that this new GO method is correct and suitable for reliability analysis of repairable system with multi-fault modes.

CONFORMAL TRANSFORMATION SOLUTION FOR THE ATTENUATION CONSTANT OF TEM TRANSMISSION LINES

The conformal transformation solution is presented for the attenuation constant ofTEM transmission lines which can be mapped into the coaxial or the parallel plate lines by certainconformal transformations including the numerical ones.The analytic and numerical results ofsome examples are also given.

Controls of pass-bands in asymmetric acoustic transmission

The controls of the pass-bands in an asymmetric acoustic transmission system are investigated numerically and ex- perimentally, and the system consists of a periodical rectangular grating and two uniform brass plates in water. We reveal that the pass-band of the asymmetric acoustic transmission is closely related to the grating period, but is affected slightly by the brass plate thickness. Moreover, the transmittance can be improved by adjusting the grating period and other structural parameters simultaneously. The control method of the system has the advantages of wider frequency range and simple operation, which has great potential applications in ultrasonic devices.

Adaptive optimization on ultrasonic transmission tomography-based temperature image for biomedical treatment

Hyperthermia has proven to be beneficial to treating superficial malignancies, particularly chest wall recurrences of breast cancer. During hyperthermia, monitoring the time–temperature profiles in the target and surrounding areas is of great significance for the effect of therapy. An ultrasound-based temperature imaging method has advantages over other approaches. When the temperature around the tumor is calculated by using the propagation speed of ultrasound, there always exist overshoot artifacts along the boundary between different tissues. In this paper, we present a new method combined with empirical mode decomposition（EDM）, similarity constraint, and continuity constraint to optimize the temperature images. Simulation and phantom experiment results compared with those from our previously proposed method prove that the EMD-based method can build a better temperature field image, which can adaptively yield better temperature images with less computation for assistant medical treatment control.

Resonant Transmission Through Two Impurities in a Narrow Quantum Wire

We study electron transmission through two impurities in a narrow quantum wire by solving Dyson's equations for single electron Green functions. We have verified that, for the delta-function potential of two impurities, the Green function can be factorized into a product of the ‘free’ Green function and current transmission amplitude. Meanwhile Green function and current transmission amplitude obey Fisher-Lee's relation. An analytical expression of the electron transmission amplitude for intrasubband and intersubband is obtained as a function of Fermi energy and the distance between two impurities. The resonant behavior of the current transmission amplitude are detail discussed.

Extraordinary Acoustic Transmission in a Helmholtz Resonance Cavity-Constructed Acoustic Grating

We investigate both experimentally and numerically a complex structure, where ＇face-to-face＇ Helmholtz resonance cavities （HRCs） are introduced to construct a one-dimensional acoustic grating. In this system, pairs of HRCs can intensely couple with each other in two forms： a bonding state and an anti-bonding state, analogous to the character of hydrogen molecule with two atoms due to the interference of wave functions of sound among the acoustic local-resonating structures. The bonding state is a ＇bright＇ state that interferes with the Fabry-Pbrot resonance mode, thereby causing this state to break up into two modes as the splitting of the extraordinary acoustic transmission peak. On the contrary, the anti-bonding state is a ＇dark＇ state in which the resonance mode remains entirely localized within the HRCs, and has no contribution to the acoustic transmission.

Extraordinary terahertz transmission through subwavelength spindle-like apertures in NbN film

We studied numerically the temperature dependent extraordinary terahertz transmission through niobium nitride(NbN) film perforated with subwavelength spindle-like apertures. Both the resonant frequency and intensity of extraordinary terahertz transmission peaks can be greatly modified by the transition of NbN film from the normal state to the superconducting state. An enhancement of the(±1, 0) NbN/magnesium oxide(MgO) peak intensity as high as 200% is demonstrated due to the combined contribution of both the superconducting transition and the excitation of localized surface plasmons(LSPs) around the apertures. The extraordinary terahertz transmission through spindle-like hole arrays patterned on the NbN film can pave the way for us to explore novel active tuning devices.