In this article,microbial fuel cell( MFC) was used for simultaneous denitrification and carbon removal to ascertain their electricity generation performance. The results showed that strengthening domestication and enr...In this article,microbial fuel cell( MFC) was used for simultaneous denitrification and carbon removal to ascertain their electricity generation performance. The results showed that strengthening domestication and enrichment of electrogenic bacteria had the best start-up effect. An increase in volumetric loading reduced the rate of pollutant removal but promoted the output voltage. The changes of working conditions such as influent concentration,sludge concentration and temperature had a great influence on the electricity generation performance of MFC,and their optimum values were 500 mg/L,2 000 mg/L and 35℃,respectively.展开更多
The focus of microbial fuel cell research in recent years has been on the development of materials,microbes,and transfer of charges in the system,resulting in a substantial improvement in current density and improved ...The focus of microbial fuel cell research in recent years has been on the development of materials,microbes,and transfer of charges in the system,resulting in a substantial improvement in current density and improved power generation.The cathode is generally recognized as the limiting factor due to its high-distance proton transfer,slow oxygen reduction reaction(ORR),and expensive materials.The heterogeneous reaction determines power gen-eration in MFC.This comprehensive review describes-recent advancements in the development of cathode mate-rials and catalysts associated with ORR.The recent studies indicated the utilization of different metal oxides,the ferrite-based catalyst to overcome this bottleneck.These studies conclude that some cathode materials,in parti-cular,graphene-based conductive polymer composites with non-precious metal catalysts provide substantial ben-efits for sustainable development in the field of MFCs.Furthermore,it also highlights the potentiality to replace the conventional platinum air cathode for the large-scale production of the next generation of MFCs.It was evi-dent from the experiments that cathode catalyst needs to be blended with conductive carbon materials to make cathode conductive and efficient for ORR.This review discusses various antifouling strategies for cathode biofoul-ing and its effect on the MFC performance.Moreover,it also depicts cost estimations of various catalysts essential for further scale-up of MFC technology.展开更多
Microbial fuel cells(MFCs)are an attractive innovation at the nexus of energy and water security for the future.MFC utilizes electrochemically active microorganisms to oxidize biodegradable substrates and generate bio...Microbial fuel cells(MFCs)are an attractive innovation at the nexus of energy and water security for the future.MFC utilizes electrochemically active microorganisms to oxidize biodegradable substrates and generate bioelectricity in a single step.The material of the anode plays a vital role in increasing the MFC’s power output.The anode in MFC can be upgraded using nanomaterials providing benefits of exceptional physicochemical properties.The nanomaterials in anode gives a high surface area,improved electron transfer promotes electroactive biofilm.Enhanced power output in terms of Direct current(DC)can be obtained as the consequence of improved microbe-electrode interaction.However,several limitations like complex synthesis and degeneration of property do exist in the development of nanomaterial-based anode.The present review discusses different renewable nanomaterial applied in the anode to recover bioelectricity in MFC.Carbon nanomaterials have emerged in the past decade as promising materials for anode construction.Composite materials have also demonstrated the capacity to become potential anode materials of choice.Application of a few transition metal oxides have been explored for efficient extracellular electron transport(EET)from microbes to the anode.展开更多
Microbial fuel cells (MFCs) are bioelectrochemical systems that convert chemical energy contained in organic matter into electrical energy by using the catalytic (metabolic) activity of living microorganisms. Mediator...Microbial fuel cells (MFCs) are bioelectrochemical systems that convert chemical energy contained in organic matter into electrical energy by using the catalytic (metabolic) activity of living microorganisms. Mediator-less two chamber H-type MFCs were constructed in the current study, using dairy digester microbial population as anode inocula to convert finely ground pine tree (Avicel) at 2% (w/v) to electricity. MFCs were placed at 37°C and after the circuit voltage was stabilized on d9, bovine rumen microorganisms cultured anaerobically for 48 hrs in cellulose broth media were added to treatment group of MFC at 1% v/v dosage. MFC power and current across an external resistor were measured daily for 10 d. At the end of incubation on d19 head space gas and anode chamber liquid solutions were collected and analyzed for total gas volume and composition, and volatile fatty acids, respectively. Addition of enriched rumen microorganisms to anaerobic anode chamber increased cellulose digestibility and increased both CO2 and methane production;however, it decreased the methane to CO2 ratio. Over the experimental period, electricity generation was increased with rumen microorganism addition, and power density normalized to anode surface area was 17.6 to 67.2 mW/m2 with average of 36.0 mW/m2 in treatment, while control group had 3.6 to 21.6 (AVE 12.0) mW/m2. These observations imply that biocatalysis in MFCs requires additional cellulolytic activities to utilize structural biomass in bioenergy production.展开更多
The current study has been undertaken to examine the beneficial effect in the power output of a microbial fuel cell (MFC) by adding cellulolytic bacteria Ruminococcus albus (R. albus) into the anodic chamber. Mediator...The current study has been undertaken to examine the beneficial effect in the power output of a microbial fuel cell (MFC) by adding cellulolytic bacteria Ruminococcus albus (R. albus) into the anodic chamber. Mediator-less H-type MFCs were set up where the anode chamber contained anaerobic digester microorganisms as inocula on finely ground pine tree (Avicel) at 2% (w/v) and the cathode chamber of 10mM phosphate buffered saline conductive solution, both separated by a cation exchange membrane. The functioning of the MFCs for generation of electrical power and the amounts of gaseous byproducts was monitored over a 9-day period. The addition of cellulolytic bacteria caused an increase of average power density from 7.9 m W/m2 to19.5 m W/m2, about 245% increase over a 9-day period. For both groups of MFCs;with R. albus and the control, the head space gases collected were methane and CO2. While the methane: CO2 ratios were found unchanged at 1.7:1 throughout the 9 days of operation, the total gas production increased from 248 mL to 319 mL due to the presence of R. albus addition. This study confirms that whereas the biocatalytic activity of anode microbial population determines the energy production, the addition of external cellulolytic bacteria into anode microbial population can improve and extend the biomass utilization.展开更多
Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. B...Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. But the electricity generation performance and its optimization of MFC embedded in A2O process still needs to be further investigated. In this study, in order to optimize the contaminants removal and electricity production of the MFC-A2/O reactor, a lab-scale corridor-style MFC-A2/O reactor, which could simulate the practical A2/O biological reactor better, was designed and operated. The removal efficiencies of chemical oxygen demand, total nitrogen and total phosphorus were continuously monitored so as the electricity generation. In addition, the influences of the structural parameters’ changes of MFC on the output voltage, including electrode material, the directly connected area and the distance between electrodes, were also studied. The results elucidated that the effluent quality of A2/O reactor could be improved when MFC was embedded, and all the investigated structural factors were closely related to the electricity generation performance of MFC to some extent.展开更多
以氮掺杂石墨烯(NG)催化微生物燃料电池(MFCs)的阴极,同时多级串并联方式连接MFCs与流动电极电容去离子(FCDI)装置,用以处理含盐废水。结果表明,NG-MFCs的产电脱氮性能明显提升,其最大输出电压为523 m V,NH_4^+-N的去除率达到92.7%;并...以氮掺杂石墨烯(NG)催化微生物燃料电池(MFCs)的阴极,同时多级串并联方式连接MFCs与流动电极电容去离子(FCDI)装置,用以处理含盐废水。结果表明,NG-MFCs的产电脱氮性能明显提升,其最大输出电压为523 m V,NH_4^+-N的去除率达到92.7%;并联方式下的MFCs产电输出更加稳定,处理Na Cl质量浓度2 g/L的盐溶液,MFCs-FCDI装置的除盐率达到30%。因此,NG-MFCs以其输出能量FCDI进行除盐,可达到能源利用与污水处理的双重效果。展开更多
基金Supported by Shandong Provincial Natural Science Foundation(ZR2019QEE039)Zhejiang Provincial Natural Science Foundation(LY18E080007)National Natural Science Foundation of China(51808494)
文摘In this article,microbial fuel cell( MFC) was used for simultaneous denitrification and carbon removal to ascertain their electricity generation performance. The results showed that strengthening domestication and enrichment of electrogenic bacteria had the best start-up effect. An increase in volumetric loading reduced the rate of pollutant removal but promoted the output voltage. The changes of working conditions such as influent concentration,sludge concentration and temperature had a great influence on the electricity generation performance of MFC,and their optimum values were 500 mg/L,2 000 mg/L and 35℃,respectively.
文摘The focus of microbial fuel cell research in recent years has been on the development of materials,microbes,and transfer of charges in the system,resulting in a substantial improvement in current density and improved power generation.The cathode is generally recognized as the limiting factor due to its high-distance proton transfer,slow oxygen reduction reaction(ORR),and expensive materials.The heterogeneous reaction determines power gen-eration in MFC.This comprehensive review describes-recent advancements in the development of cathode mate-rials and catalysts associated with ORR.The recent studies indicated the utilization of different metal oxides,the ferrite-based catalyst to overcome this bottleneck.These studies conclude that some cathode materials,in parti-cular,graphene-based conductive polymer composites with non-precious metal catalysts provide substantial ben-efits for sustainable development in the field of MFCs.Furthermore,it also highlights the potentiality to replace the conventional platinum air cathode for the large-scale production of the next generation of MFCs.It was evi-dent from the experiments that cathode catalyst needs to be blended with conductive carbon materials to make cathode conductive and efficient for ORR.This review discusses various antifouling strategies for cathode biofoul-ing and its effect on the MFC performance.Moreover,it also depicts cost estimations of various catalysts essential for further scale-up of MFC technology.
文摘Microbial fuel cells(MFCs)are an attractive innovation at the nexus of energy and water security for the future.MFC utilizes electrochemically active microorganisms to oxidize biodegradable substrates and generate bioelectricity in a single step.The material of the anode plays a vital role in increasing the MFC’s power output.The anode in MFC can be upgraded using nanomaterials providing benefits of exceptional physicochemical properties.The nanomaterials in anode gives a high surface area,improved electron transfer promotes electroactive biofilm.Enhanced power output in terms of Direct current(DC)can be obtained as the consequence of improved microbe-electrode interaction.However,several limitations like complex synthesis and degeneration of property do exist in the development of nanomaterial-based anode.The present review discusses different renewable nanomaterial applied in the anode to recover bioelectricity in MFC.Carbon nanomaterials have emerged in the past decade as promising materials for anode construction.Composite materials have also demonstrated the capacity to become potential anode materials of choice.Application of a few transition metal oxides have been explored for efficient extracellular electron transport(EET)from microbes to the anode.
文摘Microbial fuel cells (MFCs) are bioelectrochemical systems that convert chemical energy contained in organic matter into electrical energy by using the catalytic (metabolic) activity of living microorganisms. Mediator-less two chamber H-type MFCs were constructed in the current study, using dairy digester microbial population as anode inocula to convert finely ground pine tree (Avicel) at 2% (w/v) to electricity. MFCs were placed at 37°C and after the circuit voltage was stabilized on d9, bovine rumen microorganisms cultured anaerobically for 48 hrs in cellulose broth media were added to treatment group of MFC at 1% v/v dosage. MFC power and current across an external resistor were measured daily for 10 d. At the end of incubation on d19 head space gas and anode chamber liquid solutions were collected and analyzed for total gas volume and composition, and volatile fatty acids, respectively. Addition of enriched rumen microorganisms to anaerobic anode chamber increased cellulose digestibility and increased both CO2 and methane production;however, it decreased the methane to CO2 ratio. Over the experimental period, electricity generation was increased with rumen microorganism addition, and power density normalized to anode surface area was 17.6 to 67.2 mW/m2 with average of 36.0 mW/m2 in treatment, while control group had 3.6 to 21.6 (AVE 12.0) mW/m2. These observations imply that biocatalysis in MFCs requires additional cellulolytic activities to utilize structural biomass in bioenergy production.
文摘The current study has been undertaken to examine the beneficial effect in the power output of a microbial fuel cell (MFC) by adding cellulolytic bacteria Ruminococcus albus (R. albus) into the anodic chamber. Mediator-less H-type MFCs were set up where the anode chamber contained anaerobic digester microorganisms as inocula on finely ground pine tree (Avicel) at 2% (w/v) and the cathode chamber of 10mM phosphate buffered saline conductive solution, both separated by a cation exchange membrane. The functioning of the MFCs for generation of electrical power and the amounts of gaseous byproducts was monitored over a 9-day period. The addition of cellulolytic bacteria caused an increase of average power density from 7.9 m W/m2 to19.5 m W/m2, about 245% increase over a 9-day period. For both groups of MFCs;with R. albus and the control, the head space gases collected were methane and CO2. While the methane: CO2 ratios were found unchanged at 1.7:1 throughout the 9 days of operation, the total gas production increased from 248 mL to 319 mL due to the presence of R. albus addition. This study confirms that whereas the biocatalytic activity of anode microbial population determines the energy production, the addition of external cellulolytic bacteria into anode microbial population can improve and extend the biomass utilization.
文摘Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. But the electricity generation performance and its optimization of MFC embedded in A2O process still needs to be further investigated. In this study, in order to optimize the contaminants removal and electricity production of the MFC-A2/O reactor, a lab-scale corridor-style MFC-A2/O reactor, which could simulate the practical A2/O biological reactor better, was designed and operated. The removal efficiencies of chemical oxygen demand, total nitrogen and total phosphorus were continuously monitored so as the electricity generation. In addition, the influences of the structural parameters’ changes of MFC on the output voltage, including electrode material, the directly connected area and the distance between electrodes, were also studied. The results elucidated that the effluent quality of A2/O reactor could be improved when MFC was embedded, and all the investigated structural factors were closely related to the electricity generation performance of MFC to some extent.
文摘以氮掺杂石墨烯(NG)催化微生物燃料电池(MFCs)的阴极,同时多级串并联方式连接MFCs与流动电极电容去离子(FCDI)装置,用以处理含盐废水。结果表明,NG-MFCs的产电脱氮性能明显提升,其最大输出电压为523 m V,NH_4^+-N的去除率达到92.7%;并联方式下的MFCs产电输出更加稳定,处理Na Cl质量浓度2 g/L的盐溶液,MFCs-FCDI装置的除盐率达到30%。因此,NG-MFCs以其输出能量FCDI进行除盐,可达到能源利用与污水处理的双重效果。
