Dynamic Response of A Group of Cylindrical Storage Tanks with Baffles Considering the Effect of Soil Foundation

The sloshing in a group of rigid cylindrical tanks with baffles and on soil foundation under horizontal excitation is studied analytically.The solutions for the velocity potential are derived out by the liquid subdomain method.Equivalent models with mass-spring oscillators are established to replace continuous fluid.Combined with the least square technique,Chebyshev polynomials are employed to fit horizontal,rocking and horizontal-rocking coupling impedances of soil,respectively.A lumped parameter model for impedance is presented to describe the effects of soil on tank structures.A mechanical model for the soil-foundation-tank-liquid-baffle system with small amount of calculation and high accuracy is proposed using the substructure technique.The analytical solutions are in comparison with data from reported literature and numerical codes to validate the effectiveness and correctness of the model.Detailed dynamic properties and seismic responses of the soil-tank system are given for the baffle number,size and location as well as soil parameter.

Protective effects of baffles with different positions,row spacings,heights on debris flow impact

The baffle effectively slowed down debris flow velocity,reduced its kinetic energy,and significantly shortened the distance of debris flow movement.Consequently,they are widely used for protection against natural hazards such as landslides and mudslides.This study,based on the threedimensional DEM(Discrete Element Method),investigated the impact of different baffle positions on debris flow protection.Debris flow velocity and kinetic energy variations were studied through single-factor experiments.Suitable baffle positions were preliminarily selected by analyzing the influence of the first-row baffle position on the impact force and accumulation mass of debris flow.Subsequently,based on the selected baffle positions and four factors influencing the effectiveness of baffle protection(baffle position(P),baffle height(h),row spacing(S_(r)),and angle of transit area(α)),an orthogonal design was employed to further explore the optimal arrangement of baffles.The research results indicate that the use of a baffle structure could effectively slow down the motion velocity of debris flows and dissipate their energy.When the baffle is placed in the transit area,the impact force on the first-row baffle is greater than that when the baffle is placed in the deposition area.Similarly,when the baffle is placed in the transit area,the obstruction effect on debris flow mass is also greater than that when the baffle is placed in the deposition area.Through orthogonal experimental range analysis,when the impact on the first row of baffles is used as the evaluation criterion,the importance of each influencing factor is ranked asα>P>S_(r)>h.When the mass of debris flow behind the baffle is regarded as the evaluation criterion,the rank is changed to P>α>S_(r)>h.The experimental simulation results show that the optimal baffle arrangement is:P_(5),S_(r)=16,α=35°,h=9.

Micro T-Mixer with Baffles: Effect of Baffle Height and Setting Angle on Mixing

Chaotic mixing in eight different types of micro T-mixer flow has been studied experimentally and numerically. The present experimental study was performed to visualize two-liquid flows in a micro T-mixer with baffles. The Reynolds number, baffle height and setting angle were varied to investigate their effect on the mixing performance. Three micro T-mixer models were produced, which are several centimeters long and have a rectangular cross-section of few millimeters a side. The mixing of two-liquid was measured using the laser induced fluorescence (LIF) technique. Moreover, three-dimensional numerical simulations were conducted with the open-source CFD solver, OpenFOAM, for the same configuration as used in the experiments to investigate the detailed mechanism of the chaotic mixing. As a result, it was found that the mixing of two-liquid is greatly improved in the micro T-mixer with baffle. The baffle height and setting angle show a significant influence on the mixing performance.

Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles

Solid-liquid suspension in stirred tank is a common operation in the chemical industry. The power consumption, flow pattern and flow field instability of three systems named as unbaffled stirred tank, traditional baffled stirred tank and punched baffled stirred tank(Pun-BST) were studied by using the computational fluid dynamic analysis. Results showed that perforating holes in the baffles could reduce power consumption of mixing. Meanwhile, the punched baffle system could maintain the solids in suspension as traditional baffle system. The results also showed that the baffles could increase the “effective flow” of stirred tank even though the whole velocity of the vessel is lower than un-baffled vessel. In addition, both the solid-liquid suspension and “effective flow” were related to instability of the flow field.Perfect solid-liquid suspension results always along with obvious instability of the flow field. But, the strengthening effect of punched baffle on flow field instability mainly happened in the near-wall area.It's because the collision and aggregation among sub-streams induced by holes intensified the unstable fluid flow. On the whole, the Pun-BST system provided much better mixing characteristics and recommended to apply in the industrial process.

Performance comparison of heat exchangers using sextant/trisection helical baffles and segmental ones

The shell side flow fields of both sextant and trisection helical baffle heat exchangers are presented on meridian and multilayer hexagon slices.It verifies that the performance of sextant schemes is better than those of the other kinds of helical baffle heat exchangers.The main mechanisms are due to the restricted leakage flow in the minimized gaps with increased baffle number and by one row of tubes dampen the leakage flow in the circumferential overlapped area of the adjacent helical baffles.The performance features were simulated on two different angled sextant helical heat exchangers and each compared with two trisection ones of either identical helical pitch or identical incline angle.The results verified that the performances of helical heat exchangers are mainly determined by the helical pitch rather than the baffle incline angle.The average values of comprehensive index hoΔpo-1/3 of the trisection helical schemes T-24.1°and T-29.7°are correspondingly 3.47%and 3.34%lower than those of the sextant ones X-20°and X-25°with identical helical pitches.The comparison results show that the average values of shell side h.t.c.hoand comprehensive index hoΔpo-1/3 of the optimal dual helix sextant scheme DX30°are respectively 7.22%and 23.56%higher than those of the segment scheme S100.

Effect of the Inclination of Baffles on the Power Consumption and Fluid Flows in a Vessel Stirred by a Rushton Turbine

The role of baffles in mechanically stirred tanks is to promote the stability of power drawn by the impeller and to avoid the fluid swirling, thus enhancing mixing. The present paper numerically investigates the baffles effects in a vessel stirred by a Rushton turbine. The geometric factor of interest is the baffle inclination which is varying between 25°, 32.5°, 45°, 70° and 90° at different impeller rotational speeds. The impeller rotational direction has also been varied. The vortex size and power consumption were evaluated for each geometrical configuration. It was found that the best configuration is the baffle inclination by = 70° at a negative angular velocity.

Numerical investigation of effects of “baffles-deceleration strip” hybrid system on rock avalanches

Arrays of baffles are usually installed in front of protection site to attenuate the flow energy of rock avalanches in mountainous areas. Optimization design is crucial for efficiency promotion in hazard energy dissipation engineering. In this study, a deceleration strip was added in the baffles protection system to optimize the traditional baffles system. The effects of the "baffles-deceleration strip" hybrid protection system was discussed in detail with the nails number and nails angle. This study presents details of numerical experiments using the discreteelement method(DEM). The effect of the optimization of hybrid protection system(nail angle and nail number) were investigated specifically, especially the impact force that avalanches exerted on structures. The results show that the maximum impact forces and kinetic energy of the rock avalanches decreases with the increase of the number and angle of the nail. Moreover, the distance between the toe and the bearing structure(L_m) is also a key factor. The shorter the distance L_m(30 m) is, the higher the maximum impact force are. The longer the distance L_m(70 m) is, the lower the maximum impact force are. Under the same size of the nails, increasing the numbers can enhance the dissipation ability of the hybrid protection system. Meanwhile, increasing itsangle can also enhance the dissipation ability. There are three key ways for nails attenuate rock avalanches:(i) block the fine particles directly;(ii) form the particles bridge between nails and baffles;(iii) dissipate the coarse particles energy directly. The effect of segregation in rock avalanches is crucial for the energy dissipation mechanism, which is a key factor to optimize the traditional baffle system.

IMPROVING SOLIDS SUSPENSION USING DEFLECTING BAFFLES IN GASLIFT LOOP REACTORS

ＩＭＰＲＯＶＩＮＧＳＯＬＩＤＳＳＵＳＰＥＮＳＩＯＮＵＳＩＮＧＤＥＦＬＥＣＴＩＮＧＢＡＦＦＬＥＳＩＮＧＡＳＬＩＦＴＬＯＯＰＲＥＡＣＴＯＲＳ￥ＬｕａｎＭｅｉｌａｎｇ；ＭａｏＺａｉｓｈａ；ＷａｎｇＲｏｎｇ；ＣｈｅｎＪｉａｙｏｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＣｈ...

Numerical Simulation of the Shell-and-Tube Heat Exchanger:Influence of the Lower Flows and the Baffles on a Fluid Dynamics

This project proposes the numerical reproduction development of the water flow in a shell-and-tube heat exchanger 2:1 according to the CLASS C TEMA standard (for moderate operation conditions, with commercial application). With baffles in aluminum and copper tube for the cold fluid flow, the shell is in acrylic, and with thermal analysis efficiencies with regard to the presence or not of the baffles, that is to analyze the efficiency with only, the tubes and the shell and soon after the analysis with tubes and baffles. Heat exchangers are widely used equipment on an industrial and commercial scale, the application of these equipments on an industrial scale represents innovative processing solutions reflecting the processes efficiency, producing significant savings and lower cost, supporting the business success, and consequently offering opportunities, social responsibility, which are the pillars of sustainability. For the development of this work the methodology was used to calculate effectiveness, following the design parameters and contour conditions, it was analyzed the fluids behavior in the shell and the tube, through computational fluid dynamics (CFD) using the software ANSYS CFX 15.0. The results were compared with Excel generated worksheets calculated using the existing equations and correlations.

Investigation of the Effects of Baffles on the Shallow Water Sloshing in A Rectangular Tank Using A 2D Turbulent ISPH Method

Liquid sloshing is a common phenomenon in the liquid tanks transportation. Liquid waves lead to fluctuating forces on the tank wall. Uncontrolled fluctuations lead to large forces and momentums. Baffles can control these fluctuations. A numerical method, which has been widely used to model this phenomenon, is Smoothed Particle Hydrodynamics(SPH). The Lagrangian nature of this method makes it suitable for simulating free surface flows. In the present study, an accurate Incompressible Smoothed Particle Hydrodynamics(ISPH) method is developed and improved using the kernel gradient correction tensors, particle shifting algorithms, k–ε turbulence model, and free surface particle detectors. Comparisons with the experimental data approve the ability of the present algorithm for simulating shallow water sloshing. The main aim of this study is to investigate the effects of the vertical baffle on the damping of liquid sloshing. Results show that baffles number has a major role in sloshing fluctuation damping.

CFD simulation study of the effect of baffles on the fluidized bed for hydrogenation of silicon tetrachloride

In this study,the effect of channel baffles and louver baffles on the flow pattern in the large-scale industrial fluidized beds was studied by computational fluid dynamics(CFD)methods.Then,the effect of flow pattern on the chemical reaction performance was studied for the first time.Simulation results showed that the gas velocity distributed more uniformly,solid particles dispersed more homogeneously and aggregation scarcely occurred in the fluidized bed with louver baffles than that with channel baffles.The residence time distribution indicated that louver baffles remarkably suppressed gas back-mixing in comparison with channel baffles.The reasonable agreements of pressure distribution and reaction results between the simulation in the bed with channel baffles and the data on a large-scale industrial apparatus demonstrated the accuracy of the CFD model.The predicted conversion of SiCl_(4) in the bed with louver baffles(27.44%)was higher than that with channel baffles(22.69%),indicating that louver baffles markedly improved the performance of the fluidized bed.This study could provide useful information for future structural improvements of baffles in large-scale fluidized beds.

Hierarchy and subsurface correlation of muddy baffles in lacustrine delta fronts： a case study in the X Oilfield, Subei Basin, China

Muddy baffles are one of the major geological factors controlling the underground fluid flow as well as the remaining oil distribution. This study used detailed drilling data from the E1f1 reservoir in the X Oilfield, Subei Basin, China, to investigate the hierarchical muddy baffles developed on lacustrine delta fronts and their precise cross-well correlation.According to the theories on allogenic and autogenic cycles as well as the genesis and scales of muddy baffles, five orders of muddy baffles were classified, which provided various degrees of difficulty when attempting interwell correlation. Under the guidance of a reliable stratigraphic model, the precise cross-well correlation of muddy baffles could be achieved and the key point of establishment of this stratigraphic model was to calculate foreset angles of hierarchical muddy baffles during deposition. During calculation, the relationships between sediment flow direction, higher-order strata dipping direction,well types and well trajectory direction should all be taken into consideration and some other angles（referred to here as θ1,θ2 and θ3） should also be measured. Such new methods of cross-well correlation for hierarchical muddy baffles could greatly reduce the uncertainties and multiple solutions, which in turn would be significant for efficient development and oil recovery enhancement in the reservoirs.

The Equal-Norm Multiple-Scale Trefftz Method for Solving the Nonlinear Sloshing Problem with Baffles

In this paper,the equal-norm multiple-scale Trefftz method combined with the implicit Lie-group scheme is applied to solve the two-dimensional nonlinear sloshing problem with baffles.When considering solving sloshing problems with baffles by using boundary integral methods,degenerate geometry and problems of numerical instability are inevitable.To avoid numerical instability,the multiple-scale characteristic lengths are introduced into T-complete basis functions to efficiently govern the high-order oscillation disturbance.Again,the numerical noise propagation at each time step is eliminated by the vector regularization method and the group-preserving scheme.A weighting factor of the group-preserving scheme is introduced into a linear system and then used in the initial and boundary value problems(IBVPs)at each time step.More importantly,the parameters of the algorithm,namely,the T-complete function,dissipation factor,and time step,can obtain a linear relationship.The boundary noise interference and energy conservation are successfully overcome,and the accuracy of the boundary value problem is also improved.Finally,benchmark cases are used to verify the correctness of the numerical algorithm.The numerical results show that this algorithm is efficient and stable for nonlinear two-dimensional sloshing problems with baffles.

Thermal insulation and cooling properties of thermal barrier coatings of flame baffles

In order to study the thermal insulation and cooling properties of thermal barrier coatings of a flame baffle,several ZrO2 thermal barrier coatings with different thicknesses were prepared on the surface of aluminium-alloy flame-baffle samples by plasma spraying.The relations between temperature and time of these samples were tested when they were heated by combustion flame.The relations between temperature of the coatings and the sample bodies and time were also tested when the samples at high temperatures were cooled by water.The experimental results indicated that ① the thicker the thermal barrier coatings,the better the thermal insulation effect of the thermal barrier;② the higher the temperature,the more significant of the thermal insulation of the thermal barrier.Also,in the case of water-cooling,the cooling rate of the coatings was greatly subject to the plate body and the cooling rate of coatings below 1.0mm was equivalent to that of the plate body.

The Effects of Fluid Sloshing on Different Baffle Configurations in Storage Tanks Transported on Trucks during an Emergency Braking

Different Baffle designs usable in cylindrical and elliptical storage tanks carried by trucks often used for transporting inflammable liquid materials in Cameroon are investigated to evaluate their safest fluid sloshing damping response during emergency braking where the magnitude of sloshing waves are the greatest. The uncontrolled fluid sloshing creates thrust on the walls of the tanks usually felt externally on the truck carrying the tank and capable of hindering driver’s effort to maintain steer ability and improve on safety during critical braking moments. The study first passes through COMSOL, to expose the safest margin of each Baffle type at instantaneous fluid pressure wave propagation initiated at a single phase to reflect sloshing in the storage tank during an emergency braking by the truck carrying the tank. The vivid results can be seen in the domain of Acoustic Iso-surface Pressure response;but also acoustic Pressure and Sound pressure response are seen automatically. Secondly, through an experimental finding in which fluid is forced to pass through each Baffle and the resistance to fluid flow is a measured as it’s the Baffle’s damping ability. Either, the fluid is lost through the Baffle and by determination of the surface load exerted on each Baffle due to the reaction of the residual fluid acting on the surface of each Baffle after some of it is Lost, the individual sloshing damping abilities are exposed. By comparing the Experimental outcome with the computational response obtained, an ideal Baffle design is proposed for cylindrical and elliptical tanks and considered to respond to abrupt braking more effciently. The application of the Baffle designs with an average multiple holes rather than the usual face centered proved to be more effcient in fluid sloshing as they provide a more uniformly distributed damping pressure during fluid sloshing in the tank thereby reducing the magnitude of forward thrust that can be created by the conventional Baffle type during emergency braking hence contributing to improving safety. Mindful of the human, material and environmental damages that an accident involving mobile petroleum storage tanks can course, this study is therefore of great significance for design optimization by petroleum storage tank manufacturing companies in Cameroon.

Enhancing mixing of cohesive particles by baffles in a rotary drum

A soft-sphere discrete cohesive powder model was used to simulate the transverse mixing of particles in a rotary drum. Using this model, the effect of cohesion strength and baffle length was investigated. Mixing time （tR） and mixing entropy were used to characterize the mixing behavior. The results showed that increasing particle cohesiveness increases tR. Baffles enhanced transverse mixing, especially for high- cohesive particles. Moreover, the baffle length played a significant role on mixing. An optimized length of 0.50 （L/R） enhances transverse mixing for high-cohesive particles, Further increases in baffle length only decreases the mixing rate by impeding the surface flow layer. In contrast to high-cohesive particles, low-cohesive particles needed much shorter baffles.A soft-sphere discrete cohesive powder model was used to simulate the transverse mixing of particles in a rotary drum. Using this model, the effect of cohesion strength and baffle length was investigated. Mixing time （tR） and mixing entropy were used to characterize the mixing behavior. The results showed that increasing particle cohesiveness increases tR. Baffles enhanced transverse mixing, especially for high- cohesive particles. Moreover, the baffle length played a significant role on mixing. An optimized length of 0.50 （L/R） enhances transverse mixing for high-cohesive particles. Further increases in baffle length only decreases the mixing rate by impeding the surface flow layer. In contrast to high-cohesive particles, low-cohesive particles needed much shorter baffles.

Effect of baffles on performance of fluid catalytic cracking riser

Increasing demand of automobile fuel and a need to process heavier crude oil makes it imperative to find improvements to the design of existing fluid catalytic cracking （FCC） units. Several modifications to the design of the riser section of FCC units have been suggested in previous studies including： improved feed nozzle designs, multiple nozzle configurations, internal baffles, and novel two-stage-riser systems. In this study, we investigate the effects of baffles on the performance of FCC risers using computational fluid dynamics simulations. In this study, predictions from a basis model （without baffles） are compared with those from four different configurations including： （i） 5-cm baffles at 5-m spacing, （ii） 7.5-cm baffles at 5- m spacing, （iii） 10-cm baffles with 5-m spacing, （iv） lO-cm baffles at 2.5-m spacing, and （v） lO-cm baffles at 1-m spacing. The baffles force the catalyst away from wails toward the center of the riser, enhancing the radial dispersion of the catalyst and the heat transfer inside the riser. The use of longer baffles and smaller spacings further increases the dispersion, yielding more homogeneous radial profiles. The changes in the radial dispersion result in variations in the conversion, yields, and pressure drops. The baffles increase conversion of vacuum gas oil （VGO） and the yield of gasoline. However, the simulations showed that longer baffles and a larger number of baffles did not always give a higher yield or higher conversion. Among the simulated configurations, the 5-cm baffles at 5-m spacing gave the highest conversion of VGO, whereas the 10-cm baffles at 1 -m spacing resulted in the highest yield of the gasoline. Thus, rational optimization of baffle configurations is required to achieve optimal performance.

A strategy for strengthening chaotic mixing of dual shaft eccentric mixers by changing non-Newtonian fluids kinetic energy distribution

Efficiently modulating the velocity distribution and flow pattern of non-Newtonian fluids is a critical challenge in the context of dual shaft eccentric mixers for process intensification,posing a significant barrier for the existing technologies.Accordingly,this work reports a convenient strategy that changes the kinetic energy to controllably regulate the flow patterns from radial flow to axial flow.Results showed that the desired velocity distribution and flow patterns could be effectively obtained by varying the number and structure of baffles to change kinetic energy,and a more uniform velocity distribution,which could not be reached normally in standard baffle dual shaft mixers,was easily obtained.Furthermore,a comparative analysis of velocity and shear rate distributions is employed to elucidate the mechanism behind the generation of flow patterns in various dual-shaft eccentric mixers.Importantly,there is little difference in the power number of the laminar flow at the same Reynolds number,meaning that the baffle type has no effect on the power consumption,while the power number of both unbaffle and U-shaped baffle mixing systems decreases compared with the standard baffle mixing system in the transition flow.Finally,at the same rotational condition,the dimensionless mixing time of the U-shaped baffle mixing system is 15.3%and 7.9%shorter than that of the standard baffle and the unbaffle mixing system,respectively,which shows the advantage of the U-shaped baffle in stirring rate.

Effects of baffle position in serpentine flow channel on the performance of proton exchange membrane fuel cells

This study used a three-dimensional numerical model of a proton exchange membrane fuel cell with five types of channels:a smooth channel(Case 1);eight rectangular baffles were arranged in the upstream(Case 2),midstream(Case 3),downstream(Case 4),and the entire cathode flow channel(Case 5)to study the effects of baffle position on mass transport,power density,net power,etc.Moreover,the effects of back pressure and humidity on the voltage were investigated.Results showed that compared to smooth channels,the oxygen and water transport facilitation at the diffusion layer-channel interface were added 11.53%-20.60%and 7.81%-9.80%at 1.68 A·cm^(-2)by adding baffles.The closer the baffles were to upstream,the higher the total oxygen flux,but the lower the flux uniformity the worse the water removal.The oxygen flux of upstream baffles was 8.14%higher than that of downstream baffles,but oxygen flux uniformity decreased by 18.96%at 1.68 A·cm^(-2).The order of water removal and voltage improvement was Case 4>Case 5>Case 3>Case 2>Case 1.Net power of Case 4 was 9.87%higher than that of the smooth channel.To the Case 4,when the cell worked under low back pressure or high humidity,the voltage increments were higher.The potential increment for the back pressure of 0 atm was 0.9%higher than that of 2 atm(1 atm=101.325 kPa).The potential increment for the humidity of 100%was 7.89%higher than that of 50%.

Numerical modeling techniques for noise emission of free railway wheels

In this article,we consider the numerical prediction of the noise emission from a wheelset in laboratory conditions.We focus on the fluid-structure interaction leading to sound emission in the fluid domain by analyzing three different methods to account for acoustic sources.These are a discretized baffled piston using the discrete calculation method(DCM),a closed cylindrical volume using the boundary element method(BEM)and radiating elastic disks in a cubic enclosure solved with the finite element method(FEM).We provide the validation of the baffled piston and the BEM using measurements of the noise emission of a railway wheel by considering ground reflections in the numerical models.Selected space-resolved waveforms are compared with experimental results as well as with a fluid-structure interaction finite element model.The computational advantage of a discretized disk mounted on a baffle and BEM compared to FEM is highlighted,and the baffled pistons limitations caused by a lack of edge radiation effects are investigated.