Cookie Baking Process Optimization and Quality Analysis Based on Food 3D Printing

In order to obtain better quality cookies, food 3D printing technology was employed to prepare cookies. The texture, color, deformation, moisture content, and temperature of the cookie as evaluation indicators, the influences of baking process parameters, such as baking time, surface heating temperature and bottom heating temperature, on the quality of the cookie were studied to optimize the baking process parameters. The results showed that the baking process parameters had obvious effects on the texture, color, deformation, moisture content, and temperature of the cookie. All of the roasting surface heating temperature, bottom heating temperature and baking time had positive influences on the hardness, crunchiness, crispiness, and the total color difference(ΔE) of the cookie. When the heating temperatures of the surfac and bottom increased, the diameter and thickness deformation rate of the cookie increased. However,with the extension of baking time, the diameter and thickness deformation rate of the cookie first increased and then decreased. With the surface heating temperature of 180 ℃, the bottom heating temperature of 150 ℃, and baking time of 15 min, the cookie was crisp and moderate with moderate deformation and uniform color. There was no burnt phenomenon with the desired quality. Research results provided a theoretical basis for cookie manufactory based on food 3D printing technology.

Preparation of coated sand for selective laser sintering and optimization of baking process of sand moulds

A cold method was used to prepare coated sand for application in the selective laser sintering(SLS)process.Tensile strength,loss on ignition,gas evolution,and accuracy of the SLS samples were tested and analyzed,and the baking process was thoroughly investigated.Compared with coated sand prepared by the hot method,the cold method yields a more uniform and complete resin film on the sand's surface,resulting in enhanced tensile strength and accuracy.Additionally,the cold method requires a lower binder content to meet the same strength requirements,thereby minimizing gas evolution,reducing porosity defects,and ultimately improving casting quality.The coated sand samples prepared through the cold method exhibit superior accuracy,with a size error of within±0.4 mm.In contrast,the coated sand samples prepared by the hot method display a lower accuracy,with an average negative error of 2.1993 mm.The highest tensile strength could be attained by controlling the baking temperature within a suitable range(180-190°C),which can effectively reduce the generation of gas,thus contributing to improved overall performance.

Effects of Pre-Strain on Bake Hardenability and Precipitation Behavior of Al-Mg-Si Automotive Body Sheets

The study investigates the effects of pre-strain on the bake hardenability and precipitation behavior of Al-Mg-Si automotive body sheets. The scanning electron microscopy, transmission electron microscopy, tensile test, Vickers hardness test, and differential scanning calorimetry were conducted for the purpose. It was found that the pre-strain treatment partially inhibits the natural aging hardening effect but cannot completely eliminate it. The pre-straining significantly enhances the bake hardening effect, with the 5% pre-strain sample showing the highest increase in yield strength and hardness. The formation of fine β" precipitates and dislocation structures contribute to the observed strengthening. Additionally, the study highlights the importance of optimizing pre-strain levels to achieve the best balance between strength and ductility in bake-hardened aluminum alloys.

Effects of pre-strain and baking parameters on the microstructure and bake-hardening behavior of dual-phase steel

In a typical process, C-Mn steel was annealed at 800℃ for 180 s, and then cooled rapidly to obtain the ferrite-martensite microstructure. After pre-straining, the specimens were baked and the corresponding bake-hardening （BH） values were determined as a function of pre-strain, baking temperature, and baking time. The influences ofpre-strain, baking temperature and baking time on the microstructure evolution and bake-hardening behavior of the dual-phase steel were investigated systematically. It was found that the BH value apparently increased with an increase in pre-strain in the range from 0 to 1%; however, increasing pre-strain from 1% to 8% led to a decrease in the BH value. Furthermore, an increase in baking temperature favored a gradual improvement in the BH value because of the formation of Cottrell atmosphere and the precipitation of carbides in both the ferrite and martensite phases. The BH value reached a maximum of 110 MPa at a baking temperature of 300℃. Moreover, the BH value enhanced significantly with increasing baking time from 10 to 100 min.

Simulation of the influence of the baffle on flowing field in the anode baking ring furnace

In an anode baking horizontal flue ring furnace, the temperature distribution is one of the key factors influencing the quality of baked anode and is closely correlated with the gas flow. To understand the gas flow distribution in the flue, Navier Stokes equation with " k ε " two equation turbulence model was adopted and the simulation on the gas flow was performed. The numerical simulation results showed that the even direction of gas flow should be considered in the design of flue baffles and the gas flow distribution was really uneven in the flue in practical use. By adjusting the number and location of flue baffles rationally, the even distribution of gas flow can be improved obviously.

Effect of Biscuit Baking Conditions on the Stability of Microencapsulated 5-Methyltetrahydrofolic Acid and Their Physical Properties

Among the folate compounds, 5-methyltetrahydrofolic acid (5-CH3THF) is regarded as one of the most bioactive forms of folate. It is regarded as the better source of folate to humans as compared to folic acid, a synthetic form of folate, which is used for fortifying foods to prevent the incidence of neural tube defects in the new born babies. The use of 5-CH3THF as an alternative fortificant, in place of folic acid, has been explored by various researchers. However, fortification of 5-CH3THF is problematic due to its lower stability. This study investigated the stability of microencapsulated 5-CH3THF in biscuits baked at various temperatures and times as well as changes in their physical properties. Microcapsule with pectin and alginate ratio of 80:20, prepared by spray drying, gave the highest retention (68.6%) of the 5-CH3THF, therefore, chosen for fortification. The encapsulated and unencapsulated 5-CH3THF were mixed separately with flour and biscuit ingredients and baked at 180℃, 200 and 220℃, each for 5, 9 and 12 min. The inclusion of encapsulated and unencapsulated 5-CH3THF in the biscuit formulation and subsequent baking at various temperatures and times resulted in retention of 5-CH3THF from 19.1% to 1.7%. Microencapsulation of 5-CH3THF slightly improved the retention of 5-CH3THF over unencapsuated biscuits at 180℃ for 5 min, but almost no such effect was achieved under baking temperatures of 200℃ and 220℃. Physical analysis showed darker colour, harder texture and lower moisture content for biscuits baked at higher test temperatures. It seems intense heating condition that caused “over baking” of the biscuit likely to be responsible for the loss of the vitamin as well as less desirable physical properties of the biscuits.

Accumulation of Protein Fractions during Grain Filling of Wheat Genotypes Differing in Protein Content and Baking Quality

The accumulation of protein fractions was analyzed on developing and mature wheat grains of three cultivars differing in protein content and baking quality. There was a slight difference in the accumulation of cytoplasmic proteins in the cultivars used. The high yield but low protein cultivar showed a consistent decline of protein content during grain filling but the high - protein cultivars increased their psotein contant after 25 days post-anthcsis. The accumulation of storage proteins was different from that of cytoplasmic protein, and there were also cultivar variations. However, all cultivars reached their, maximum-synthesizing capacity for storage proteins at maturity. The relationship between the protein fractions or their ratio and baking quality was also discussed.

Effect of prestrain and baking on the secondary deformation properties of cold-rolled ultra-high-strength steel sheets

Two experimental steels with tensile strength above 980 MPa were prepared to investigate the effect of prestrain and baking on their mechanical and fracture behaviors. The experimental results reveal that,for both experimental steels,with increases in the prestrain level,the bake hardening value increases before reaching a maximum point,and then decreases with further increases in the prestrain level. The results of a "bending-baking-secondary bending"test indicate that the secondary bendability deteriorates at a high level of prestrain. The yield strength of the experimental steels was found to increase and the elongation to decrease after high levels of prestrain and bake hardening. Fracture morphology images indicate that a high prestrain level is associated with shallow dimples and more and larger local cleavage areas.

Modification and Optimization of a Baking Oven for Small Scale Bread Production

An existing small-scale single-powered baking oven was modified and optimize into a dual-powered oven. The oven was redesigned to accommodate the initially designed firewood heat source and the newly introduced gas heat source. Four heat exchangers (thermal pipes) were introduced to the baking chamber for effective heat and mass transfer during baking of bread dough. The thermal pipes were made of 2 mm thick hollow galvanized steel pipe of 23 mm diameter and 660 mm length. The performance of the oven was evaluated using the standard performance index, which includes baking capacity, baking efficiency and weight loss of the baked bread. The baked bread’s physical properties were determined and analyzed using Duncan multiple range ANOVA test at significant level of p < 0.05. These properties were optimized to determine the generate regression models using 3D model plot. The baking capacity, baking efficiency, weight loss and optimum baking temperature were: 101.9 kg/h, 46.44% (wood-fired);70.34% (gas-fired), 13.5 g (wood-fired);and 25.5 g (gas-fired), 150˚C, respectively. The physical properties of baked bread, wood-fired were found to correspond with that of gas-fired oven. The modified oven can be used for the baking of dough at domestic, small and medium scale bakery.

Baking Industry in China

The baking industry is a part of the food industry. Since the beginning of the 1980s, China has carried out a strategy of developing instant foods. The baking industry has developed rapidly, and has introduced big changes in the structure of its varieties, quality of products, decoration of packages and technical equipment. So far, there are 4, 000 enterprises baking foods in China with 360, 000 staff and workers and an annual capacity of baked foods of two

Natural and modified food hydrocolloids as gluten replacement in baked foods:Functional benefits

Gluten,the protein responsible for the superior viscoelastic properties of refined wheat flour dough over glutenfree cereals,causes celiac disease in people susceptible to gluten-allergy.Moreover,the sustainability of using wheat flour in baked foods is threatened by its high cost,especially in countries that depend on imported wheat for their bakery industry.Research has shown that hydrocolloids serve as gluten replacements in baked foods,in response to these challenges.Food hydrocolloids are a class of high-molecular weight polysaccharides and proteins,which serve as functional ingredients in the food industry that modify the foods’rheological and textural properties.They function as stabilizers,viscosity modifiers,gelling agents,water binders,fibres,and inhibitors of ice crystal in foods.Further,food hydrocolloids have also been reported to possess health-promoting properties,such as lowering of postprandial blood glucose and plasma cholesterol concentrations,colon cancer prevention,and modulation of intestinal transit and satiety.They are obtained from plants,animals or microorganisms,and can be used in their natural or modified forms.The aim of this paper is to review the functional benefits of natural and modified hydrocolloids as gluten replacements in baked foods,emphasizing their physicochemical,nutraceutical,and sensorial importance.The application effects of food hydrocolloids as gluten substitutes in gluten-free baked products’quality were discussed.Also,some practical approaches to improve the quality of gluten-free baked products,in response to an increasing consumers’demand and the rising cost of refined wheat flour were highlighted.

Effect of Sodium Carbonate on Extraction by Aqueous Decoction of Total Polyphenols from Crushed and Whole Leaves of Combretum micranthum

Sodium bicarbonate is sometimes used to aid in the extraction of total polyphenols. Its main effect is to increase the pH of the extraction solution. Raising the pH can cause changes in the chemical structure of polyphenols. This can lead to variations in their biological properties, solubility and stability. This work studied the effect of sodium carbonate on the extraction by aqueous decoction of total polyphenols from the leaves of Combretum micranthum. The content of total phenolic compounds in the extracts was estimated by the Folin-Ciocalteu method. The color of the samples was measured using a colorimeter (type: KONICA MINOLTA. Japan) based on the CIELAB color system. The results obtained were subjected to a one-way ANOVA analysis of variance with R software version 3.2.4 Revised (2018) and Minitab-18 software. The results reveal a drop in the concentration of extracted polyphenols proportional to the addition of sodium carbonate, i.e. a drop from 3.30 to 1.04 mg·AG·100 g-1 of extract on whole leaves and 3.921 to 2.551 mg·AG·100 g-1 extract on crushed leaves. On the other hand, the intensity of the coloring of the extracts increases significantly with the addition of sodium carbonate from 0.0 g·L -1 to 0.666 g·L-1.

时变信道中Rake技术的研究

介绍了时变信道对传输信号的影响以及时变信道的特点.通过分析时变信道的数学模型,根据时变信道自然形成的多径信号,以扩频通信为基础,利用Rake技术克服多径衰落,给出了仿真分析.

短波猝发扩频系统关键技术研究

实现了一个DS-BPSK的多进制正交扩频系统,其信息速率可达2.4kbps,并应用快速哈达马(Hadamard)变换(FHT)对信息进行解扩来简化系统。首先介绍了系统发送端和接收端的组成,其次分析了各部分所采用的关键技术,最后测试了采用RAKE接收技术时系统性能的改善情况。

Medium-Mn steels for hot forming application in the automotive industry

Advanced high-strength steels have been widely used to improve the crashworthiness and lightweight of vehicles.Different from the popular cold stamping,hot forming of boron-alloyed manganese steels,such as 22MnB5,could produce ultra-high-strength steel parts without springback and with accurate control of dimensions.Moreover,hot-formed medium-Mn steels could have many advantages,including better mechanical properties and lower production cost,over hot-formed 22MnB5.This paper reviews the hot forming process in the automotive industry,hot-formed steel grades,and medium-Mn steel grades and their application in hot forming in depth.In particular,the adaptabilities of medium-Mn steels and the presently popular 22MnB5 into hot forming were compared thoroughly.Future research should focus on the technological issues encountered in hot forming of medium-Mn steels to promote their commercialization.

Experimental study on Ti+Nb bearing ultra-low carbon bake hardening sheet steel hot-rolled in the ferrite region

A Ti＋Nb bearing ultra-low carbon bake hardening sheet steel hot-rolled in the conventional austenite region and in the ferrite region with lubrication was experimentally studied. Subsequent cold rolling and continuous annealing processes were also conducted. The results show that microstructures of ultra-low carbon bake hardening hot strips at room temperature are basically irregular polygonal ferrites. The yield strength, ultimate tensile strength, n value, and r value of the No.2 specimen hot-rolled in the ferrite region with lubrication are 243 MPa, 364 MPa, 0.29, and 1.74, respectively, which are similar to those of the No.1 specimen hot-roiled in the conventional austenite region. The elongation rate and bake hardening value of No.2 specimen are 51% and 49.4 MPa, respectively, which are greater than those of No. 1 specimen. The No.2 specimen hot-rolled in the ferrite region with lubrication exhibits good mechanical properties and relatively excellent baking hardening performance. Therefore, the hot rolling experiment of Ti＋Nb bearing ultra-low carbon bake hardening steel in the ferrite region with lubrication is feasible and can be considered in the future industrial trial production.

Bake hardening behavior of TRIP and DP steels

The bake hardening （BH） behavior of transformation-induced plasticity （TRIP） and dual-phase （DP） steels after different prestrains was studied. The experimental results indicate that TRIP steel exhibits good BH ability while DP steel does not, and prestrain displays a strong effect on the BH values of both steels. The comparison of microstructures of the two steels showed that the hard second phase in the matrix might be harmful to the BH ability. For deformed specimens, baking resulted in a loss of uniform elongation, but there was no obvious decrease in uniform elongation for unprestrained specimens.

A new household ultrasonic cleaning method for pyrethroids in cabbage

Pyrethroid is widely used in developing countries and is a potential threat to human health.So putting forward an effective pyrethroid cleaning method is of vital importance.Clearance of fenpropathrin,cypermethrin and deltamethrin in cabbage by using ultrasonic treatment accompanied with different baking soda concentrations were investigated in this study.The results of response surface methodology showed that the maximum clearance rate was 70.61% for fenpropathrin under the optimal power,treated time,treated temperature and baking soda concentration,which were 260.02 W,10 min,20.15◦C and 0.014 g/mL,respectively.Similarly,the maximum removal efficiency was 73.72% for cypermethrin under 240 W,13.84 min,19.53℃ and 0.014 g/mL,and 92.15%for deltamethrin under 238.99 W,12.42 min,25℃ and 0.013 g/mL.The clearance rate of pyrethroid by this method was significant higher(P<0.05)than traditional cleaning methods(bathing and running water washing).The contents of the compositions such as vitamin C,total soluble sugar,protein and dietary fiber,texture and sensory evaluation of cabbage were not found obvious changes after the ultrasonic treatment combined with baking soda(P>0.05).Results showed that ultrasonic treatment combined with baking soda was an effective way to eliminate the fenpropathrin,cypermethrin and deltamethrin in cabbage without influencing cabbage quality.

胆道扩张器致胆肠道损伤6例报告

目的了解胆道手术中Bake扩张器损伤胆总管与十二指肠的原因、处理方法及预防措施。方法回顾分析作者等医院Bake扩张器穿破5例胆总管下端及1例十二指肠壁病例的临床资料。结果 6例在术中均可见扩张器穿出胆肠道或经T管注水后发现。胆总管下端穿孔用可吸收线连续缝合至T管注水不再渗漏为止。除1例穿孔于胆总管下端内侧壁,修补后胆总管下端完全性梗阻,21 d后自行缓解,其余5例术后均无并发症。结论为减少Bake扩张器损伤胆总管与十二指肠,使用Bake扩张器时术者应顺着胆管走向轻柔操作,最好在胆道镜指引下扩张器对准Oddi括约肌口探入。术中发现胆总管下端穿孔,即使未能显露出胆管壁及穿孔,使用纤细的可吸收线,对准溢水处连续缝合亦能解决问题,也较为安全。