High energy ball milling （HEBM） method was applied to synthesize Ni （OH）2 with different doped elements sub-stitution for Ni^2＋. The morphology, structure and electrochemical behavior of prepared powders were stu...High energy ball milling （HEBM） method was applied to synthesize Ni （OH）2 with different doped elements sub-stitution for Ni^2＋. The morphology, structure and electrochemical behavior of prepared powders were studied. The re-suits reveal that all the synthesized Ni（OH）2 particles were in sub-micron sizes and greatly agglomerated. Co-, Mg-,Fe- or Mn-doped Ni （OH） 2 was of β-phase with 0.400-0.500 nm crystal interlayer distance, while A1- and Zn-doped products displayed a-phase with larger crystal interlayer spaces. The electrochemical mechanisms of synthe-sized Ni（OH）2 electrodes were discussed by EIS spectra. The specific capacity of Co-doped Ni （OH）2 is 245 mA·h · g^-1, i. e. , 60 mA· h · g^-1 higher than that of Al-doped electrode, which has the highest discharging plat-form of a mid-voltage of 1.30 V.展开更多
Ball milling method was applied to prepare Lu^3＋/TiO2 photocatalysts. The catalysts were characterized with X-ray powder diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, UV-visible diffuse reflectance spe...Ball milling method was applied to prepare Lu^3＋/TiO2 photocatalysts. The catalysts were characterized with X-ray powder diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, UV-visible diffuse reflectance spectra（UV-vis DRS）, energy dispersive X-ray spectrometer（EDS）, transmission electron microscopy（TEM） and Brunauer-Emmett-Teller（BET） method. The photocatalytic activities were determined by the degradation of methylene blue（MB） equipped with a 300 W medium pressure mercury lamp. Results show that the first order reaction rate constants of Lu^3＋/TiO2 and pure TiO2 are0.0565 and 0.0263 min-1, respectively, which both were evaluated under the condition of catalysts loading of 0.2 g/L,initial concentration of 25 mg/L for MB, mole ratio of Lu^3＋/TiO2 of 1.5% and milling time of 4 h. The average crystal sizes of 1.5 mol% Lu^3＋/TiO2 and pure TiO2 are 18.7 and 19.3 nm, respectively.展开更多
基金Supported by the National Natural Science Foundation of China(No.20273047).
文摘High energy ball milling （HEBM） method was applied to synthesize Ni （OH）2 with different doped elements sub-stitution for Ni^2＋. The morphology, structure and electrochemical behavior of prepared powders were studied. The re-suits reveal that all the synthesized Ni（OH）2 particles were in sub-micron sizes and greatly agglomerated. Co-, Mg-,Fe- or Mn-doped Ni （OH） 2 was of β-phase with 0.400-0.500 nm crystal interlayer distance, while A1- and Zn-doped products displayed a-phase with larger crystal interlayer spaces. The electrochemical mechanisms of synthe-sized Ni（OH）2 electrodes were discussed by EIS spectra. The specific capacity of Co-doped Ni （OH）2 is 245 mA·h · g^-1, i. e. , 60 mA· h · g^-1 higher than that of Al-doped electrode, which has the highest discharging plat-form of a mid-voltage of 1.30 V.
基金Project supported by the Natural Science Foundation of Hainan Province(20156242,217100,217101,20152033)Science and Technology Department of Hainan Province(ZDYF2017011)
文摘Ball milling method was applied to prepare Lu^3＋/TiO2 photocatalysts. The catalysts were characterized with X-ray powder diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, UV-visible diffuse reflectance spectra（UV-vis DRS）, energy dispersive X-ray spectrometer（EDS）, transmission electron microscopy（TEM） and Brunauer-Emmett-Teller（BET） method. The photocatalytic activities were determined by the degradation of methylene blue（MB） equipped with a 300 W medium pressure mercury lamp. Results show that the first order reaction rate constants of Lu^3＋/TiO2 and pure TiO2 are0.0565 and 0.0263 min-1, respectively, which both were evaluated under the condition of catalysts loading of 0.2 g/L,initial concentration of 25 mg/L for MB, mole ratio of Lu^3＋/TiO2 of 1.5% and milling time of 4 h. The average crystal sizes of 1.5 mol% Lu^3＋/TiO2 and pure TiO2 are 18.7 and 19.3 nm, respectively.
