Levulinic acid(LA) has been identified as a promising green,biomass derived platform chemical.Response surface analysis(RSA) with a four-factor-five-level central composite design(CCD) was applied to optimize the hydr...Levulinic acid(LA) has been identified as a promising green,biomass derived platform chemical.Response surface analysis(RSA) with a four-factor-five-level central composite design(CCD) was applied to optimize the hydrolysis conditions for the conversion of bamboo(Phyllostachys Praecox f.preveynalis) shoot shell(BSS) to LA catalyzed with ionic liquid [C4mim]HSO4.The effects of four main reaction parameters including temperature,time,C[C4mim]HSO4(initial [C4mim]HSO4 concentration) and XBSS(initial BSS intake) on the hydrolysis reaction for yield of LA were analyzed.A quadratic equation model for yield of LA was established and fitted to the data with an R2 of 0.9868,and effects of main factors and their corresponding relationships were obtained with RSA.Model validation and results of CCD showed good correspondence between actual and predicted values.The analysis of variance(ANOVA) of the results indicated that the yield of LA in the range studied was significantly(P<0.05) affected by the four factors.The optimized reaction conditions were as follows:temperature of 145 ℃,time of 103.8 min,C[C4mim]HSO4 of 0.9 mol.L-1 and XBSS of 2.04%(by mass),respectively.A high yield [(71±0.41)%(by mol),triplicate experiment] was obtained at the optimum conditions of temperature of 145 ℃,time of 104 min,C[C4mim]HSO4 of 0.9 mol.L-1 and XBSS of 2%(by mass),which obtained from the real experiments,concurred with the model prediction [73.8%(by mol) based on available C6 sugars in BSS or 17.9%(by mass) based on the mass of BSS],indicating that the model was adequate for the hydrolysis process.展开更多
With bamboo shoot shell nanofibers（BSN） and konjac glucomannan（KGM） as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, ch...With bamboo shoot shell nanofibers（BSN） and konjac glucomannan（KGM） as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, characteristic functional groups and thermal properties of BSN/KGM aerogels were characterized by scanning electron microscopy（SEM）, infrared spectroscopy（IR）, X-ray diffraction（XRD） and thermogravimetric analysis（TGA）. The effect of BSN on the structure and properties of BSN/KGM aerogels was also studied. The results showed that the BSN/KGM aerogels possessed network porous structure with compact and homogeneous porosity, high specific surface area and low density. With the increase of BSN, the sheet structure of aerogels was converted into the 3D porous network structure, which contributes significantly higher thermal stability. In addition, the BSN/KGM aerogels showed excellent mechanical properties. The maximum relative compression rate was 62%, suggesting the addition of BSN can enhance the compression properties of the BSN/KGM aerogels.展开更多
Bamboo shoot shell（BSS）,a by-product from bamboo shoot processing industries,is a natural resource of cellulose. In this study,high-pressure homogenization assisted with acidolysis treatment was employed to produce ...Bamboo shoot shell（BSS）,a by-product from bamboo shoot processing industries,is a natural resource of cellulose. In this study,high-pressure homogenization assisted with acidolysis treatment was employed to produce BSS cellulose nanofiber（CNF）,and the structure was characterized by powder X-ray diffraction（XRD）,Fourier-transform infrared（FT-IR） spectroscopy,atomic force microscopy（AFM）,high resolution transmission electron microscopy（HTTEM）,thermogravimetric analysis（TGA）,and ^13 C nuclear magnetic resonance（NMR）. Moreover,the structure and properties of CNF were compared with those of BSS insoluble dietary fiber（IDF）. The results showed that CNF was in the form of a grid-like micro fiber,and its particle size was obviously reduced,while the crystallinity,thermal stability and solubility were increased. The results indicated that high-pressure homogenization assisted with acidolysis treatment was an effective method to prepare the BSS CNF,which could be a promising biopolymer reinforced material.展开更多
Microwave digestion and inductively coupled plasma mass spectrometry (ICP-MS) method was used to determine the contents of 25 inorganic elements in basal part, meat and shell of bamboo shoots. It could be concluded th...Microwave digestion and inductively coupled plasma mass spectrometry (ICP-MS) method was used to determine the contents of 25 inorganic elements in basal part, meat and shell of bamboo shoots. It could be concluded that the method could be applied to determine 25 inorganic elements in bamboo shoots. The elements with a dry basis content higher than 10 mg/kg were listed in the order of content decrease as follows, basal part of bamboo shoots: K > Ca > Mg > Mn > P > Al > Fe > Zn > Na;bamboo shoots meat: K > P > Ca > Mg > Mn > Fe > Al > Zn > Na > Ba > Sr;bamboo shoots shell: K > P > Mg > Ca > Mn > Al > Fe > Na > Zn;B, Pb, Cu, Cr ranged from 1.0 - 10 mg/kg;Ga, As, Se, Cd, Sn, Sb, V, Co, Ni were lower than 0.80 mg/kg. The harmful elements Cd, As, Cr, Hg, Pb were commonly monitored in feeds. The wet basis content (mg/kg) of Cd, As, Cr was lower than: 0.028, 0.022 and 0.42 respectively;no Hg was found;the content of Pb(mg/kg) in basal part, meat and shell of bamboo shoots was 0.82, 0.35 and 0.41 respectively. The results provide basic data for the development of bamboo shoots and its byproduct.展开更多
基金Supported by the National Natural Science Foundation of China（30940058,31170672）the Natural Science Foundation of Zhejiang Province of China（Y3110025）+1 种基金Key Laboratory for Physical Processing of Agricultural Products（JAPP2010-4）Key Laboratory of Exploitation and Preservation of Coastal Bio-resource（2010F30003）
文摘Levulinic acid(LA) has been identified as a promising green,biomass derived platform chemical.Response surface analysis(RSA) with a four-factor-five-level central composite design(CCD) was applied to optimize the hydrolysis conditions for the conversion of bamboo(Phyllostachys Praecox f.preveynalis) shoot shell(BSS) to LA catalyzed with ionic liquid [C4mim]HSO4.The effects of four main reaction parameters including temperature,time,C[C4mim]HSO4(initial [C4mim]HSO4 concentration) and XBSS(initial BSS intake) on the hydrolysis reaction for yield of LA were analyzed.A quadratic equation model for yield of LA was established and fitted to the data with an R2 of 0.9868,and effects of main factors and their corresponding relationships were obtained with RSA.Model validation and results of CCD showed good correspondence between actual and predicted values.The analysis of variance(ANOVA) of the results indicated that the yield of LA in the range studied was significantly(P<0.05) affected by the four factors.The optimized reaction conditions were as follows:temperature of 145 ℃,time of 103.8 min,C[C4mim]HSO4 of 0.9 mol.L-1 and XBSS of 2.04%(by mass),respectively.A high yield [(71±0.41)%(by mol),triplicate experiment] was obtained at the optimum conditions of temperature of 145 ℃,time of 104 min,C[C4mim]HSO4 of 0.9 mol.L-1 and XBSS of 2%(by mass),which obtained from the real experiments,concurred with the model prediction [73.8%(by mol) based on available C6 sugars in BSS or 17.9%(by mass) based on the mass of BSS],indicating that the model was adequate for the hydrolysis process.
基金supported by the National Natural Science Foundation of China(No.31471704)the Scientific Research Foundation of Graduate School of Fujian Agriculture and Forestry University(No.324-1122yb034)
文摘With bamboo shoot shell nanofibers（BSN） and konjac glucomannan（KGM） as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, characteristic functional groups and thermal properties of BSN/KGM aerogels were characterized by scanning electron microscopy（SEM）, infrared spectroscopy（IR）, X-ray diffraction（XRD） and thermogravimetric analysis（TGA）. The effect of BSN on the structure and properties of BSN/KGM aerogels was also studied. The results showed that the BSN/KGM aerogels possessed network porous structure with compact and homogeneous porosity, high specific surface area and low density. With the increase of BSN, the sheet structure of aerogels was converted into the 3D porous network structure, which contributes significantly higher thermal stability. In addition, the BSN/KGM aerogels showed excellent mechanical properties. The maximum relative compression rate was 62%, suggesting the addition of BSN can enhance the compression properties of the BSN/KGM aerogels.
文摘Bamboo shoot shell（BSS）,a by-product from bamboo shoot processing industries,is a natural resource of cellulose. In this study,high-pressure homogenization assisted with acidolysis treatment was employed to produce BSS cellulose nanofiber（CNF）,and the structure was characterized by powder X-ray diffraction（XRD）,Fourier-transform infrared（FT-IR） spectroscopy,atomic force microscopy（AFM）,high resolution transmission electron microscopy（HTTEM）,thermogravimetric analysis（TGA）,and ^13 C nuclear magnetic resonance（NMR）. Moreover,the structure and properties of CNF were compared with those of BSS insoluble dietary fiber（IDF）. The results showed that CNF was in the form of a grid-like micro fiber,and its particle size was obviously reduced,while the crystallinity,thermal stability and solubility were increased. The results indicated that high-pressure homogenization assisted with acidolysis treatment was an effective method to prepare the BSS CNF,which could be a promising biopolymer reinforced material.
文摘Microwave digestion and inductively coupled plasma mass spectrometry (ICP-MS) method was used to determine the contents of 25 inorganic elements in basal part, meat and shell of bamboo shoots. It could be concluded that the method could be applied to determine 25 inorganic elements in bamboo shoots. The elements with a dry basis content higher than 10 mg/kg were listed in the order of content decrease as follows, basal part of bamboo shoots: K > Ca > Mg > Mn > P > Al > Fe > Zn > Na;bamboo shoots meat: K > P > Ca > Mg > Mn > Fe > Al > Zn > Na > Ba > Sr;bamboo shoots shell: K > P > Mg > Ca > Mn > Al > Fe > Na > Zn;B, Pb, Cu, Cr ranged from 1.0 - 10 mg/kg;Ga, As, Se, Cd, Sn, Sb, V, Co, Ni were lower than 0.80 mg/kg. The harmful elements Cd, As, Cr, Hg, Pb were commonly monitored in feeds. The wet basis content (mg/kg) of Cd, As, Cr was lower than: 0.028, 0.022 and 0.42 respectively;no Hg was found;the content of Pb(mg/kg) in basal part, meat and shell of bamboo shoots was 0.82, 0.35 and 0.41 respectively. The results provide basic data for the development of bamboo shoots and its byproduct.
