To overcome warping in thin bamboo bundle veneer laminated composites(TBLC),their hydrothermal deformation characteristics were systematically investigated in this study.It was found that TBLCs accelerated the release...To overcome warping in thin bamboo bundle veneer laminated composites(TBLC),their hydrothermal deformation characteristics were systematically investigated in this study.It was found that TBLCs accelerated the release of internal stress in the thickness direction in a hydrothermal environment,which increased their warpage.TBLCs showed increased warpage in the width and diagonal directions upon increasing the temperature.The warpage of Type E increased by 155.88%and 66.67%in the width and diagonal directions,respectively,when the temperature increased from 25C to 100C.The symmetrical TBLC with cross-lay-up and odd layers displayed better hydrothermal stability.We revealed that the deformation of the TBLCs could be regulated under the synergistic effect of water and temperature.These results provide a scientific basis for improving the uniformity of bamboo bundle composite materials and for developing thin bamboo bundle fiber composite materials with designable structures and controllable performance.展开更多
Landscape designers increasingly prefer to use wood/bamboo-based composites for outdoor hydrophilic platforms owing to their natural surface texture,high performance,and sustainability to facilitate extensive interact...Landscape designers increasingly prefer to use wood/bamboo-based composites for outdoor hydrophilic platforms owing to their natural surface texture,high performance,and sustainability to facilitate extensive interaction between people and water and enable the full range of ecological functions of water resources.In this study,four laminated composite(LC)structures were designed and manufactured using fluffed bamboo and wood veneers.Their surface textures,profile densities,water resistances,and mechanical properties were then evaluated.The type of fluffed veneer of the surface layer determined the texture of the LC surface.The specific structures of fluffed bamboo and wood veneer laminations were found to affect the LC profile density variability,water resistance,and mechanical properties owing to the differences in the strength and interfacial properties of bamboo and wood fibers.Finally,the water resistance and mechanical properties of all four LCs were found to be much higher than the highest level specified in GB/T 20241-2006 for“laminated veneer lumber”and GB/T 30364-2013 for“bamboo scrimber flooring”,indicating that they are promising materials for structures and flooring,particularly for outdoor hydrophilic platforms.展开更多
Elementary units“bamboo bundle”and“bamboo sliver”were processed and cross-linked as“bamboo-bundle veneer(BBV)”and“bamboo-sliver veneer(BSV)”for preparation of laminated composites.The concept of“high-content-...Elementary units“bamboo bundle”and“bamboo sliver”were processed and cross-linked as“bamboo-bundle veneer(BBV)”and“bamboo-sliver veneer(BSV)”for preparation of laminated composites.The concept of“high-content-adhesive surface treatment”was raised to improve boards’performance,rather than increasing adhesive absorption of every layer’s porous unit.That is,some BBVs experienced an extra“dipping&drying”to absorb more resin(named“HBBV”).The effect of the amount of knitting threads was also discussed for influencing BBV’s quality.Results indicated that light transmittance of BBVs decreased as the amount of threads added from 3 to 8,while mechanical stiffness increased.Adding two skin layers of HBBVs symmetrically was helpful to enhance 24-hour underwater and 28-hour“boil-dry-boil”dimensional stability for boards with BSVs as core,while more than two pairs of HBBVs were needed to improve 28-hour“boil-dry-boil”dimensional stability of boards with BBVs as core.Two symmetrical surface layers of BBVs/HBBVs provided BSV-boards/BBV-boards with greater bending resistance,while such“surface treatment”would not raise shearing strength of BSV-boards upon 28-hour“boil-dry-boil”treatment.Besides,the data obtained from drop-hammer impact test indicated that more than two pair of surface BBVs or HBBVs were required for significant improvement in anti-impact property.展开更多
Over the past decade,the physical and mechanical performances of laminated bamboo lumber(LBL)–a bamboo-based structural material,have been extensively studied using experimental,analytical,and numerical approaches.Th...Over the past decade,the physical and mechanical performances of laminated bamboo lumber(LBL)–a bamboo-based structural material,have been extensively studied using experimental,analytical,and numerical approaches.This paper presents a review of existing knowledge in the literature about the mechanical properties of LBL.The paper involved the review of the response of LBL to different types of loading such as tension,bending,compres-sion,and shear.Based on results of the literature reviewed,the strength of LBL parallel to grain was 90–124 MPa with MOE of 10700 MPa in tension,29.55–72.60 MPa,and MOE of 8396–11022 MPa in compression,63.87–128.4 MPa,and MOE of 8320–10912 MPa in bending,and 7.15–17.5 MPa in shear.The average strength of LBL was similar and in some cases exceeded the average values of bamboo-or wood-based materials,while the variability of its mechanical parameters was lower.The variability in strength values of LBL was affected by bamboo species,density and thickness of bamboo strips,growth portion,type of treatment,strips arrange-ments,and type of adhesive which in turn calls for classification of LBL by strength grades,degree of hardness,the capability of impregnation and penetration,as well as by areas of application in construction.The study pro-vided and discussed concluding observations,the current research gap,and future research directions on the mechanical properties of LBL.展开更多
基金supported by the Youth Top-notch Talent Program of Science and Technology Innovation for Forestry and Grassland(2019132606).
文摘To overcome warping in thin bamboo bundle veneer laminated composites(TBLC),their hydrothermal deformation characteristics were systematically investigated in this study.It was found that TBLCs accelerated the release of internal stress in the thickness direction in a hydrothermal environment,which increased their warpage.TBLCs showed increased warpage in the width and diagonal directions upon increasing the temperature.The warpage of Type E increased by 155.88%and 66.67%in the width and diagonal directions,respectively,when the temperature increased from 25C to 100C.The symmetrical TBLC with cross-lay-up and odd layers displayed better hydrothermal stability.We revealed that the deformation of the TBLCs could be regulated under the synergistic effect of water and temperature.These results provide a scientific basis for improving the uniformity of bamboo bundle composite materials and for developing thin bamboo bundle fiber composite materials with designable structures and controllable performance.
基金the Science and Technology Project of Zhejiang Province(2021C02012)the Science Foundation of Zhejiang Provincial Department of Education(113429A4F21070)the Science Foundation of Zhejiang Sci-Tech University(11340031282014 and 11343132612052).
文摘Landscape designers increasingly prefer to use wood/bamboo-based composites for outdoor hydrophilic platforms owing to their natural surface texture,high performance,and sustainability to facilitate extensive interaction between people and water and enable the full range of ecological functions of water resources.In this study,four laminated composite(LC)structures were designed and manufactured using fluffed bamboo and wood veneers.Their surface textures,profile densities,water resistances,and mechanical properties were then evaluated.The type of fluffed veneer of the surface layer determined the texture of the LC surface.The specific structures of fluffed bamboo and wood veneer laminations were found to affect the LC profile density variability,water resistance,and mechanical properties owing to the differences in the strength and interfacial properties of bamboo and wood fibers.Finally,the water resistance and mechanical properties of all four LCs were found to be much higher than the highest level specified in GB/T 20241-2006 for“laminated veneer lumber”and GB/T 30364-2013 for“bamboo scrimber flooring”,indicating that they are promising materials for structures and flooring,particularly for outdoor hydrophilic platforms.
基金This work was supported by Open Fund of Key Laboratory of National Forestry and Grassland Administration/Beijing for Bamboo&Rattan Science and Technology[ICBR-2020-11]China Postdoctoral Science Foundation[2019M660500]Fundamental Research Funds of International Center for Bamboo and Rattan[1632019003].
文摘Elementary units“bamboo bundle”and“bamboo sliver”were processed and cross-linked as“bamboo-bundle veneer(BBV)”and“bamboo-sliver veneer(BSV)”for preparation of laminated composites.The concept of“high-content-adhesive surface treatment”was raised to improve boards’performance,rather than increasing adhesive absorption of every layer’s porous unit.That is,some BBVs experienced an extra“dipping&drying”to absorb more resin(named“HBBV”).The effect of the amount of knitting threads was also discussed for influencing BBV’s quality.Results indicated that light transmittance of BBVs decreased as the amount of threads added from 3 to 8,while mechanical stiffness increased.Adding two skin layers of HBBVs symmetrically was helpful to enhance 24-hour underwater and 28-hour“boil-dry-boil”dimensional stability for boards with BSVs as core,while more than two pairs of HBBVs were needed to improve 28-hour“boil-dry-boil”dimensional stability of boards with BBVs as core.Two symmetrical surface layers of BBVs/HBBVs provided BSV-boards/BBV-boards with greater bending resistance,while such“surface treatment”would not raise shearing strength of BSV-boards upon 28-hour“boil-dry-boil”treatment.Besides,the data obtained from drop-hammer impact test indicated that more than two pair of surface BBVs or HBBVs were required for significant improvement in anti-impact property.
基金The research work presented in this paper is supported by the National Natural Science Foundation of China(Nos.51878354&51308301)the Natural Science Foundation of Jiangsu Province(Nos.BK20181402&BK20130978)+1 种基金Six Talent Peak High-Level Projects of Jiang su Province(No.JZ029)Qinglan Project of Jiangsu Higher Education Institutions.Any research results expressed in this paper are those of the writers and do not necessarily reflect the views of the foundations.
文摘Over the past decade,the physical and mechanical performances of laminated bamboo lumber(LBL)–a bamboo-based structural material,have been extensively studied using experimental,analytical,and numerical approaches.This paper presents a review of existing knowledge in the literature about the mechanical properties of LBL.The paper involved the review of the response of LBL to different types of loading such as tension,bending,compres-sion,and shear.Based on results of the literature reviewed,the strength of LBL parallel to grain was 90–124 MPa with MOE of 10700 MPa in tension,29.55–72.60 MPa,and MOE of 8396–11022 MPa in compression,63.87–128.4 MPa,and MOE of 8320–10912 MPa in bending,and 7.15–17.5 MPa in shear.The average strength of LBL was similar and in some cases exceeded the average values of bamboo-or wood-based materials,while the variability of its mechanical parameters was lower.The variability in strength values of LBL was affected by bamboo species,density and thickness of bamboo strips,growth portion,type of treatment,strips arrange-ments,and type of adhesive which in turn calls for classification of LBL by strength grades,degree of hardness,the capability of impregnation and penetration,as well as by areas of application in construction.The study pro-vided and discussed concluding observations,the current research gap,and future research directions on the mechanical properties of LBL.
