Thermal fatigue and wear of compacted graphite iron brake discs with various thermomechanical properties

The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical properties.Compacted graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of ferrite.The peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction tests.The morphology of thermal cracks and 3D profiles of the worn surfaces were also discussed.It is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue resistance.Oxidization of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal cracks.Despite the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.

Sustainable Biocomposites Materials for Automotive Brake Pad Application:An Overview

Research into converting waste into viable eco-friendly products has gained global concern.Using natural fibres and pulverized metallic waste becomes necessary to reduce noxious environmental emissions due to indiscriminately occupying the land.This study reviews the literature in the broad area of green composites in search of materials that can be used in automotive brake pads.Materials made by biocomposite,rather than fossil fuels,will be favoured.A database containing the tribo-mechanical performance of numerous potential components for the future green composite was established using the technical details of bio-polymers and natural reinforcements.The development of materials with diverse compositions and varying proportions is now conceivable,and these materials can be permanently connected in fully regulated processes.This explanation demonstrates that all of these variables affect friction coefficient,resistance to wear from friction and high temperatures,and the operating life of brake pads to varying degrees.In this study,renewable materials for the matrix and reinforcement are screened to determine which have sufficient strength,coefficient of friction,wear resistance properties,and reasonable costs,making them a feasible option for a green composite.The most significant,intriguing,and unusual materials used in manufacturing brake pads are gathered in this review,which also analyzes how they affect the tribological characteristics of the pads.

Numerical and Experimental Analysis of the Aerodynamic Torque for Axle-Mounted Train Brake Discs

As the velocity of a train increases,the corresponding air pumping power consumption of the brake discs increases proportionally.In the present experimental study,a standard axle-mounted brake disc with circumferential pillars was analyzed using a 1:1 scale model and a test rig in a wind tunnel.In particular,three upstream velocities were selected on the basis of earlier investigations of trains operating at 160,250,and 400 km/h,respectively.Moreover,3D steady computational fluid dynamics(CFD)simulations of the flow field were conducted to compare with the wind tunnel test outcomes.The results for a 3-car train at 180 km/h demonstrated:(1)good agreement between the air resistance torques obtained from the wind tunnel tests and the related numerical results,with differences ranging from 0.95%to 5.88%;(2)discrepancies ranging from 3.2 to 3.8 N·m;(3)cooling ribs contributing more than 60%of the air resistance torque;(4)the fast rotation of brake discs causing a significantly different flow field near the bogie area,resulting in 25 times more air pumping power loss than that obtained in the stationary brake-disc case.

Thermal analysis for brake disks of SiC/6061 Al alloy co-continuous composite for CRH3 during emergency braking considering airflow cooling

The mass of high-speed trains can be reduced using the brake disk prepared with SiC network ceramic frame reinforced 6061 aluminum alloy composite （SiCn/Al）. The thermal and stress analyses of SiCn/Al brake disk during emergency braking at a speed of 300 km/h considering airflow cooling were investigated using finite element （FE） and computational fluid dynamics （CFD） methods. All three modes of heat transfer （conduction, convection and radiation） were analyzed along with the design features of the brake assembly and their interfaces. The results suggested that the higher convection coefficients achieved with airflow cooling will not only reduce the maximum temperature in the braking but also reduce the thermal gradients, since heat will be removed faster from hotter parts of the disk. Airflow cooling should be effective to reduce the risk of hot spot formation and disc thermal distortion. The highest temperature after emergency braking was 461 °C and 359 °C without and with considering airflow cooling, respectively. The equivalent stress could reach 269 MPa and 164 MPa without and with considering airflow cooling, respectively. However, the maximum surface stress may exceed the material yield strength during an emergency braking, which may cause a plastic damage accumulation in a brake disk without cooling. The simulation results are consistent with the experimental results well.

Distribution and Dissipation of Braking Power of Wet Multidisc Brake

To study the distribution and dissipation of braking power of wet multidisc brake and determine thermal load and thermal flux distribution between mated discs, the concept of distributing brake power four times was put forward. The third and the fourth distribution of brake power were calculated by using finite element(FE) software ANSYS. The third and the fourth distribution of wet multidisc brake are mainly related to material characteristics of discs during emergency braking, while most of the braking power is carried off during continuous braking. Basis is provided for further analysis of disc failure and applicability of different friction materials.

星形超曲面上Hamilton系统Brake轨道的多重存在性

研究Hamilton系统具有固定能量的brake轨道的个数问题.在适当条件下,证明了R2n中紧星 形超曲面∑上brake轨道的几个多重存在性定理,结果包含了Szulkin的已有结论.

正定型超曲面上Hamilton系统Brake轨道的存在性

结合Rabinowitz和Szulkin关于Brake轨道的存在性与多重性的结论,利用部分对称泛函的临界点理论研究Hamilton系统在更广泛的能量面上Brake轨道的存在性问题.在适当条件下,证明了R2n中正定型超曲面Σ上存在Hamilton系统的Brake轨道.由于星型超曲面是正定型超曲面的特殊情形,该研究包含了Rabinowitz的相应结论.

指标理论及星形Hamiltonian系统多个次brake轨道的存在性

利用Ｚｐ指标理论定义了一种相对Ｚｐ指标，并应用它研究了星形能量面上Ｈａｍｉｌｔｏｎｉａｎ系统多个次闸轨道的存在性，从而改进了Ｓｚｕｌｋｉｎ的结果。

Full Power Hydraulic Brake System Based on Double Pipelines for Heavy Vehicles

The hydraulic caliper disc brake system with air-over-oil is widely adopted at present for heavy vehicles,which makes use of air pressure system propelling the hydraulic pressure system acting on friction plates divided and combined for braking.There are some disadvantages such as pneumatic components failure,dust polluted and produce lots of heat in hydraulic caliper disc brake system.Moreover,considering the demands of the high speed,heavy weight,heavy load and fast brake of heavy vehicles,the full power hydraulic brake system based on double pipelines for heavy vehicles is designed and analyzed in this paper.The scheme of the full power hydraulic brake system,in which the triloculare cylinder is controlled by dual brake valve,is adopted in the brake system.The full power hydraulic brake system can accomplish steering brake,parking brake and emergent brake for heavy vehicles.Furthermore,electronic control system that is responsible for coordinating the work of hydraulic decelerator and hydraulic brake system is developed for different speed brakes.Based on the analysis of the influence of composed unit and connecting pipeline on braking performance,the nonlinear mathematic model is established for the full power hydraulic brake system.The braking completion time and braking pressure in braking performance of the double-pipeline steering brake and parking brake are discussed by means of simulation experiments based on Matlab/Simulink,and the simulation results prove that the braking performance of steering brake and parking brake meets the designing requirement of the full power hydraulic brake system.Moreover,the test-bed experiments of the brake system for heavy vehicles are carried out.The experimental data prove that the braking performance achieves the goal of the design,and that the full power hydraulic brake system based on double pipelines can effectively enhance braking performance,ensure braking reliability and security for heavy vehicles.

Opening Angle Rules of the Aerodynamic Brake Panel

In order to get the relationship between aerodynamic brake effect and the opening angle,based on a high-speed train model in CFD software FLUENT,the aerodynamic force properties from brake panels with different opening angles were analyzed as well as the flow field's variation laws. Six cases were researched,taking opening angles 45°,60°,75°,80°,85° and 90° respectively.Three-dimensional Reynolds-average Navier-Stokes equation combined with k-ε turbulence model was utilized. The control equation was discretized and solved by finite volume method.SIMPLE method was also considered to couple the pressure and velocity fields and search the numeric solutions. Conclusions can be achieved from the results which are shown as follows. When the opening angle increases from 45° to 75°,the aerodynamic forces and the central area with larger pressure increase fast,and the flow field distribution changes greatly; when the opening angle increases from75° to 90°,the aerodynamic forces and the central area with larger pressure increase slowly, and the flow field distribution changes slightly; considering train boundary and opening performance of the wind resistance brake mechanism,the opening angle should be 75°.

Computer aided design and analysis of a tunable muzzle brake

This research work deals with the design of a tunable muzzle brake [10] for a rifle chambered in 5.56 x 45 NATO ammunition. It proposes to solve the problem of handling differences from shooter to shooter by incorporating the feature of tunability. Beside this, it also solves the problem of requirement of optimum recoil in short recoil weapons. This innovation gives this design an edge over its already existing counterparts in the market. The product is designed using the internal ballistics calculations and the investigations been performed using solidworks flow simulation tool and ANSYS static structural to check the parameters like velocity distribution, pressure growth, and muzzle brake force along the series of ports and comparison of the so found results with those devised by the authors of the documents mentioned in references. This assures the market adaptability of the product for satisfactory performance, when brought among its already existing counterpart, though with a slight edge over them due to tunability. The results so found shall be concluded satisfactory regarding the performance of muzzle brake.

Transient Temperature Field Analysis of Brake in Nonaxisymmetric Three-dimensional Model

The disk-pad brake used in automobile is divided i nt o two parts: the disk, geometrically axisymmetric, and the pad, of which the geo metry is three-dimensional. In the course of braking, all parameters of the pro cesses (velocity, load, temperature, physicomechanical and tribological characte ristics of materials of the couple, and conditions of contacts) vary with the ti me. Considerable evidence has show that the contact temperature is an integral f actor reflecting the specific power friction influence at the combined effect of load, speed, friction coefficient, thermo physical and durability properties of materials of a frictional couple. Furthermore, the physic mechanical state of t he interface of the disk and pads is determined not only by the contact temperat ure but also by the nonstationary temperature field. Using the two-dimensional model for thermal analysis implies that the contact conditions and frictiona l heat flux transfer are independent of θ. This may lead to false thermal elast ic distortions and unrealistic contact conditions. An analytical model is presen ted in this paper for the determination of contact temperature distribution on t he working surface of a brake. To consider the effects of the moving heat source (the pad) with relative sliding speed variation, a transient finite element tec hnique is used to characterize the temperature fields of the solid rotor with ap propriate thermal boundary conditions. And the transient heat conduction problem can be solved as a nominal 3-D transient heat transfer problem with an immovab le heat source. Numerical results shows that the operating characteristics of th e brake exert an essentially influence on the surface temperature distribution a nd the maximal contact temperature. The temperature field presents a noaxisymmet ric characteristic (a function of θ) and proves to be strongly localized and po ssesses a sharp gradient in both axial and radial directions.

RESEARCH ON DESIGN METHOD OF A MULTIPLE DISC WET BRAKE IN LUBRICATED ENVIRONMENT

The rmomechanical phenomens occurring between friction pairs greatly changethe distributions of lining pressure and friction surface temperature of a multiple disc wet brake.It has become one of the main causes of brake failure. In order to understand these thermomechanicalphenomena, several design and material factors that have great influence on thermomechanicalphenomena, such as heat transfer coefficient, friction factor; sliding velocity, initial liningpressure and so on, are analyzed. An isothermal design method is proposed for designing a multipledisc wet brake.

Comparative Study on the Complex Eigenvalue Prediction of Brake Squeal by Two Infinite Element Modeling Approaches

The complex eigenvalue analysis is currently a common approach to predict squealing vibration and noise. There are two methods for modeling friction contact in the complex eigenvalue analysis of friction systems. In one method, contact springs are used to simulate friction contact. In another method, no contact spring is used. However, it has been uncertain whether these two modeling methods can predict approximately identical results. In order to clarify the uncertainty, two finite element models of the same brake system for the brake squeal prediction are established and simulated by using ABAQUS and NASTRAN software tools, respectively. In the ABAQUS model, friction coupling is applied to determine normal contact force and no contact spring is assumed. Whilst in the NASTRAN model, the contact spring is assumed by the penalty method to simulate contact connection. Through the numerical simulations, it is recognized that even if the same mesh geometry is applied, generally, these two finite element approaches are not capable of predicting approximately identical unstable frequencies. The ABAQUS approach can predict instabilities of high frequency up to 20 kHz or more, while the NASTRAN approach can only predict some instabilities of high frequency, not all. Moreover, the simulation results also show that both the contact spring stiffness and mesh size have influences to some extent on the prediction results of squeal. The present comparative work illuminates that the modeling method without contact springs is more suitable to predict squealing vibration and noise, comparing to the modeling method with contact springs. It is proposed that one should prefer using the modeling method without contact springs to predict squealing vibration and noise. The proposed study provides the reference for predicting squealing vibration and noise.

RELIABILITY ANALYSIS OF CRANE BRAKE PARAMETERS

The high failure rate of crane brake results from improper choice of brakingtorque. The mathematical model of reliability for the crane brake parameters is introduced. Based onlarge amount of actual data the parameter reliabilities of 5 approx 50 t general overheadtravelling cranes are calculated, the probabilities that the braking torque is less than the statictorque acting on the axle when the load moves down are obtained. Moreover, the ways to improve thereliability of brake parameters are discussed, the most reasonable values of braking safetycoefficient are given.

Electronic Brake-Force Distribution Control Methods of ABS-Equipped Vehicles During Cornering Braking

Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.

Analysis and Design of Cylindrical Magnetorheological Fluid Brake

Magnetorheological (MR) fluids consist of stable suspensions of magnetic particles in a carrying fluid such as water or silicone oils. The magnetorheological response of MR fluids results from the polarization induced in suspended particles by application of an external magnetic field. The interaction between the induced dipoles causes the particles to form columnar structure, parallel to the applied field. These chain-like structures restrict the motion of fluids, thereby increasing the viscosity and yield stress of the MR fluids. These mechanical characteristics allow for the construction of magnetically controlled device such as the MR fluids rotary brakes. However, there has been little information published about the design of MR fluid brakes. In this paper the design of the cylindrical MR fluid brake is investigated theoretically. Bingham model is used to characterize the constitutive behaviors of the MR fluids subject to an external magnetic field. The operational principle of the cylindrical MR fluid brake is presented. The theoretical method is developed to analyze the transmission properties of the torque of the cylindrical MR fluid brake. An engineering expression for the torque is derived to provide the theoretical foundations in the design of the cylindrical MR fluid brake. Based on this equation the volume and thickness of the annular MR fluids within the brake is expressed as functions of the desired ratio of torques with saturated magnetic field and without external field, the controlled mechanical power and the MR fluid material properties. The parameters of the thickness and width of the fluid in the brake can be calculated from the obtained equations when the required mechanical power level, the desired torque ratio are specified.

Position Control Optimization of Aerodynamic Brake Device for High-speed Trains

The aerodynamic braking is a clean and non-adhesion braking, and can be used to provide extra braking force during high-speed emergency braking. The research of aerodynamic braking has attracted more and more attentions in recent years. However, most researchers in this field focus on aerodynamic effects and seldom on issues of position control of the aerodynamic braking board. The purpose of this paper is to explore position control optimization of the braking board in an aerodynamic braking prototype. The mathematical models of the hydraulic drive unit in the aerodynamic braking system are analyzed in detail, and the simulation models are established. Three control functions--constant, linear, and quadratic--are explored. Two kinds of criteria, including the position steady-state error and the acceleration of the piston rod, are used to evaluate system performance. Simulation results show that the position steady state-error is reduced from around 12-2 mm by applying a linear instead of a constant function, while the acceleration is reduced from 25,71-3.70 m/s2 with a quadratic control function. Use of the quadratic control function is shown to improve system performance. Experimental results obtained by measuring the position response of the piston rod on a test-bench also suggest a reduced position error and smooth movement of the piston rod. This implies that the acceleration is smaller when using the quadratic function, thus verifying the effectiveness of control schemes to improve to system performance. This paper proposes an effective and easily implemented control scheme that improves the position response of hydraulic cylinders during position control.

Optimum Position of Electromagnetic Brake on Slab Caster

Three-dimensional mathematical models were developed for studying the molten steel flow and the trajectories of inclusions and bubbles in continuous casting mold with electromagnetic brake.The results show that the effect of the electromagnetic brake on the molten steel flow and the movement of inclusions and bubbles depends on the position of electromagnetic brake.While EMBR Ruler is installed at the exit of the submerged entry nozzle,the velocity of the main jet of molten steel from the nozzle can be decreased effectively,the velocity of the molten steel streams near the free surface and the narrow face is reduced obviously;Meantime more inclusions and bubbles could float up to the slag layer.

Experimental study on the temperature evolution in the railway brake disc

Increasing operating speed of modern passenger railway vehicles leads to higher thermal load onthe braking system. Organic composite brake pads are poor thermal conductors, hence frictionalheat is absorbed mainly by the disc. In this study three brake pad types were tested on thedynamometer. Metallic fibres, steel and copper, were introduced to the formulation of twomaterials. The third was a non-metallic material - a reference case. Dynamometer test comprisedemergency brake applications to determine the frictional characteristics of the materials andconstant-power drag braking to analyse the effect of metal fibres on temperature evolution,measured by six thermocouples embedded in the brake disc. Mean friction coefficient is analysedand discussed. It is concluded that conductive fibre in the friction material formulation mayinfluence its tribological characteristics. Despite high thermal conductivity, metal fibres in theconcentration tested in this study, did not reduce temperature of the brake disc.