Aerodynamic, Kinematic and Control Coupling Simulation of Aircraft Maneuvering Flight

Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical solution, dynamic unstructured nested mesh assembly method and numerical solution method of flight mechanics equation. On this basis, a virtual flight simulation platform integrating pneumatics, motion and control is established. Based on this virtual flight simulation platform, F-16 aircraft is simulated by high angle of attack pull-up flight mode and multi-channel roll pull-up coupling flight mode. Finally, the influence of rudder on the yaw control channel is investigated. The results show that the numerical virtual flight simulation platform established in this paper has the ability to simulate maneuvering flight of aircraft.

Adaptive variable structure control based on backstepping for spacecraft with reaction wheels during attitude maneuver

An adaptive variable structure control method based on backstepping is proposed for the attitude maneuver problem of rigid spacecraft with reaction wheel dynamics in the presence of uncertain inertia matrix and external disturbances. The proposed control approach is a combination of the backstepping and the adaptive variable structure control. The cascaded structure of the attitude maneuver control system with reaction wheel dynamics gives the advantage for applying the backstepping method to construct Lyapunov functions. The robust stability to external disturbances and parametric uncertainty is guaranteed by the adaptive variable structure control. To validate the proposed control algorithm, numerical simulations using the proposed approach are performed for the attitude maneuver mission of rigid spacecraft with a configuration consisting of four reaction wheels for actuator and three magnetorquers for momentum unloading. Simulation results verify the effectiveness of the proposed control algorithm.

Multi-UAV cooperative maneuver decision-making for pursuitevasion using improved MADRL

Aiming at the problem of multi-UAV pursuit-evasion confrontation, a UAV cooperative maneuver method based on an improved multi-agent deep reinforcement learning(MADRL) is proposed. In this method, an improved Comm Net network based on a communication mechanism is introduced into a deep reinforcement learning algorithm to solve the multi-agent problem. A layer of gated recurrent unit(GRU) is added to the actor-network structure to remember historical environmental states. Subsequently,another GRU is designed as a communication channel in the Comm Net core network layer to refine communication information between UAVs. Finally, the simulation results of the algorithm in two sets of scenarios are given, and the results show that the method has good effectiveness and applicability.

Improved filtered-ε adaptive inverse control and its application on nonlinear ship maneuvering

The drawbacks of common nonlinear Filtered-ε adaptive inverse control （AIC） method, such as the unreliability due to the change of delay time and the faultiness existing in its disturbance control loop, are discussed. Based on it, the diagram of AIC is amended to accommodate with the characteristic of nonlinear object with time delay. The corresponding Filtered-ε adaptive algorithm based on RTRL is presented to identify the parameters and design the controller. The simulation results on a nonlinear ship model of ＂The R.O.V Zeefakker＂ show that compared with the previous scheme and adaptive PID control, the improved method not only keeps the same dynamic response performance, but also owns higher robustness and disturbance rejection ability, and it is suitable for the control of nonlinear objects which have higher requirement to the maneuverability under complex disturbance environment.

Variable structure attitude maneuver and vibration control of flexible spacecraft

A dual-stage control system design method is presented for the three-axis-rotational maneuver and vibration stabilization of a spacecraft with flexible appendages embedded with piezoceramics as sensor and actuator. In this design approach, the attitude control and the vibration suppression sub-systems are designed separately using the lower order model. The design of attitude controller is based on the variable structure control (VSC) theory leading to a discontinuous control law. This controller accomplishes asymptotic attitude maneuvering in the closed-loop system and is insensitive to the interaction of elastic modes and uncertainty in the system. To actively suppress the flexible vibrations, the modal velocity feedback control method is presented by using piezoelectric materials as additional sensor and actuator bonded on the surface of the flexible appendages. In addition, a special configuration of actuators for three-axis attitude control is also investigated: the pitch attitude controlled by a momentum wheel, and the roll/yaw control achieved by on-off thrusters, which is modulated by pulse width pulse frequency modulation technique to construct the proper control torque history. Numerical simulations performed show that the rotational maneuver and vibration suppression are accomplished in spite of the presence of disturbance torque and parameter uncertainty.

Trajectory and Correction Maneuver During the Transfer from Earth to Halo Orbit

This article addresses the design of the trajectory transferring from Earth to Halo orbit, and proposes a timing closed-loop strategy of correction maneuver during the transfer in the frame of circular restricted three body problem （CR3BP）. The relation between the Floquet multipliers and the magnitudes of Halo orbit is established, so that the suitable magnitude for the aerospace mission is chosen in terms of the stability of Halo orbit. The stable manifold is investigated from the Poincar6 mapping defined which is different from the previous researches, and six types of single-impulse transfer trajectories are attained from the geometry of the invariant manifolds. Based on one of the trajectories of indirect transfer which are ignored in the most of literatures, the stochastic control theory for imperfect information of the discrete linear stochastic system is applied to design the trajectory correction maneuver. The statistical dispersion analysis is performed by Monte-Carlo simulation,

Variable structure guidance law for attacking surface maneuver targets

The characteristics of surface maneuver targets are analyzed and a 3-D relative motion model for missiles and targets is established. A variable structure guidance law is designed considering the characteristics of targets. In the guidance law, the distance between missiles and targets as well as the missile-target relative velocity are all substituted by estimation values. The estimation errors, the target＇s velocity, and the maneuver acceleration are all treated as bounded disturbance. The guidance law proposed can be implemented conveniently in engineering with little target information. The performance of the guidance system is analyzed theoretically and the numerical simulation result shows the effectiveness of the guidance law.

Chaotic attitude and reorientation maneuver for completely liquid-filled spacecraft with flexible appendage

The present paper investigates the chaotic attitude dynamics and reorientation maneuver for completely viscous liquid-filled spacecraft with flexible appendage. All of the equations of motion are derived by using Lagrangian mechanics and then transformed into a form consisting of an unperturbed part plus perturbed terms so that the system＇s nonlinear characteristics can be exploited in phase space. Emphases are laid on the chaotic attitude dynamics produced from certain sets of physical parameter values of the spacecraft when energy dissipation acts to derive the body from minor to major axis spin. Numerical solutions of these equations show that the attitude dynamics of liquid-filled flexible spacecraft possesses characteristics common to random, non- periodic solutions and chaos, and it is demonstrated that the desired reorientation maneuver is guaranteed by using a pair of thruster impulses. The control strategy for reorientation maneuver is designed and the numerical simulation results are presented for both the uncontrolled and controlled spins transition.

Nonlinear differential geometric guidance for maneuvering target

Based on the idea of zeroing the line of sight rate（LOSR）,a novel nonlinear differential geometric（DG） law for intercepting the agile target is proposed.In the first part,the DG formulations are utilized to describe the relatively kinematics model of missile and target,and the nonlinear DG guidance（DGG） law is proposed based on the nonlinear control theory to eliminate the influence brought by target.Further,the missile guidance commands are derived to overcome the information loss caused by decoupling condition,the new necessary initial condition is developed to guarantee capture the agile target.Then,the designed nonlinear DGG commands are transformed from an arc-length system to the time domain.A desirable aspect of the designed guidance law is that it does not require rigorous information about target acceleration.Representative numerical results show that the designed guidance law obtain a better performance than the traditional DGG law for agile target.

A Fuzzy Adaptive Algorithm Based on“Current”Statistical Model for Maneuvering Target Tracking

The basic"current"statistical model and adaptive Kalman filter algorithm can not track a weakly maneuvering target precisely,though it has good estimate accuracy for strongly maneuvering target.In order to solve this problem,a novel nonlinear fuzzy membership function was presented to adjust the upper and lower limit of target acceleration adaptively,and then the validity of the new algorithm for feeblish maneuvering target was proved in theory.At last,the computer simulation experiments indicated that the new algorithm has a great advantage over the basic"current"statistical model and adaptive algorithm.

NEW OPTIMAL LARGE ANGLE MANEUVER STRATEGY FOR SINGLE FLEXIBLE LINK

A component synthesis vibration suppression (CSVS) method for flexible structures is put forward. It can eliminate any unwanted orders of flexible vibration modes while achieves desired rigid motion. This method has robustness to uncertainty of frequency, which makes it practical in engineering. Several time optimal and time-fuel optimal control strategies are designed for a kind of single flexible link. Simulation results validate the feasibility of our method.

Maneuvering Angle Rigid Formations With Global Convergence Guarantees

Angle rigid multi-agent formations can simultaneously undergo translational,rotational,and scaling maneuvering,therefore combining the maneuvering capabilities of both distance and bearing rigid formations.However,maneuvering angle rigid formations in 2D or 3D with global convergence guarantees is shown to be a challenging problem in the existing literature even when relative position measurements are available.Motivated by angle-induced linear equations in 2D triangles and 3D tetrahedra,this paper aims to solve this challenging problem in both 2D and3D under a leader-follower framework.For the 2D case where the leaders have constant velocities,by using local relative position and velocity measurements,a formation maneuvering law is designed for the followers governed by double-integrator dynamics.When the leaders have time-varying velocities,a sliding mode formation maneuvering law is proposed by using the same measurements.For the 3D case,to establish an angle-induced linear equation for each tetrahedron,we assume that all the followers'coordinate frames share a common Z direction.Then,a formation maneuvering law is proposed for the followers to globally maneuver Z-weakly angle rigid formations in 3D.The extension to Lagrangian agent dynamics and the construction of the desired rigid formations by using the minimum number of angle constraints are also discussed.Simulation examples are provided to validate the effectiveness of the proposed algorithms.

Maneuver and vibration reduction of flexible spacecraft using sliding mode/command shaping technique

A generalized scheme based on the sliding mode and component synthesis vibration suppression (CSVS) method has been proposed for the rotational maneuver and vibration suppression of an orbiting spacecraft with flexible appendages. The proposed control design process is twofold: design of the attitude controller followed by the design of a flexible vibration attenuator. The attitude controller using only the attitude and the rate information for the flexible spacecraft (FS) is designed to serve two purposes: it forces the attitude motion onto a pre-selected sliding surface and then guides it to the state space origin. The shaped command input controller based on the CSVS method is designed for the reduction of the flexible mode vibration, which only requires information about the natural frequency and damping of the closed system. This information is used to discretize the input so that minimum energy is injected via the controller to the flexible modes of the spacecraft. Additionally, to extend the CSVS method to the system with the on-off actuators, the pulse-width pulse-frequency (PWPF) modulation is introduced to control the thruster firing and integrated with the CSVS method. PWPF modulation is a control method that provides pseudo-linear operation for an on-off thruster. The proposed control strategy has been implemented on a FS, which is a hub with symmetric cantilever flexible beam appendages and can undergo a single axis rotation. The results have been proven the potential of this technique to control FS.

Large-angle attitude tracking maneuver of a spacecraft

Discusses how to transfer an attitude tracking problem with time variable boundary condition into a fixed boundary problem by means of line of sight coordinate, rotational quaternion and relative error feed back signals, and the control law of attitude tracking designed based on the quasi Euler signals and describes the simulation of a forewarning satellite monitoring a low orbital spacecraft to prove the correctness of the design method.

Enhancing Safety in Autonomous Vehicle Navigation:An Optimized Path Planning Approach Leveraging Model Predictive Control

This paper explores the application of Model Predictive Control(MPC)to enhance safety and efficiency in autonomous vehicle(AV)navigation through optimized path planning.The evolution of AV technology has progressed rapidly,moving from basic driver-assistance systems(Level 1)to fully autonomous capabilities(Level 5).Central to this advancement are two key functionalities:Lane-Change Maneuvers(LCM)and Adaptive Cruise Control(ACC).In this study,a detailed simulation environment is created to replicate the road network between Nantun andWuri on National Freeway No.1 in Taiwan.The MPC controller is deployed to optimize vehicle trajectories,ensuring safe and efficient navigation.Simulated onboard sensors,including vehicle cameras and millimeterwave radar,are used to detect and respond to dynamic changes in the surrounding environment,enabling real-time decision-making for LCM and ACC.The simulation resultshighlight the superiority of the MPC-based approach in maintaining safe distances,executing controlled lane changes,and optimizing fuel efficiency.Specifically,the MPC controller effectively manages collision avoidance,reduces travel time,and contributes to smoother traffic flow compared to traditional path planning methods.These findings underscore the potential of MPC to enhance the reliability and safety of autonomous driving in complex traffic scenarios.Future research will focus on validating these results through real-world testing,addressing computational challenges for real-time implementation,and exploring the adaptability of MPC under various environmental conditions.This study provides a significant step towards achieving safer and more efficient autonomous vehicle navigation,paving the way for broader adoption of MPC in AV systems.

Optimum PN Guidance Law for Maneuvering Target

An optimum PN guidance law for maneuvering target is developed using optimal control theory.By estimating the target position and setting the cost function,the guidance law can be deduced even without knowing the missile lateral acceleration.Since the quadratic cost function can make a compromise between the miss distance and the control constraint,the optimum guidance law obtained is more general.Also,introduced line of sight rate as the input,a practical form of this guidance law is derived.The simulation results show the effectiveness of the guidance laws.

Simulation Study on Active Roll Control of Vehicles

The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.

Methods of vascular control technique during liver resection:a comprehensive review

BACKGROUND: Significant hemorrhage together with blood transfusion increases postoperative morbidity and mortality of hepatic resection. Hepatic vascular occlusion is effective in minimizing bleeding during hepatic parenchymal transection. This article aimed to review the current role and status of various techniques of hepatic vascular occlusion during hepatic resection. DATA SOURCES: The relevant manuscripts were identified by searching MEDLINE, and PubMed for articles published between January 1980 and April 2010 using the keywords 'vascular control', 'vascular clamping', 'vascular exclusion' and 'hepatectomy'. Additional papers were identified by a manual search of the references from the key articles. RESULTS: One randomized controlled trial (RCT) and 5 RCTs showed intermittent Pringle maneuver and ischemic preconditioning followed by continuous Pringle maneuver were superior to continuous Pringle maneuver alone, respectively. Two RCTs compared the outcomes of hepatectomy with and without intermittent Pringle maneuver. One showed Pringle maneuver to be beneficial, while the other failed to show any benefit. One RCT showed that ischemic preconditioning had significantly less blood loss than using intermittent Pringle maneuver. Four RCTs evaluated the use of hemihepatic vascular occlusion. One RCT showed it had significantly less blood loss than Pringle maneuver, while the other 3 showed no significant difference. Only 1 RCT showed it had significantly less liver ischemic injury. No RCT had been carried out to assess segmental vascular occlusion. Two RCTs compared the outcomes of total hepatic vascular exclusion (THVE) and Pringle maneuver. One RCT showed THVE resulted in similar blood loss, but a higher postoperative complication. The other RCT showed less blood loss using THVE but the postoperative complication rate was similar. Both studies showed similar degree of liver ischemic injury. Only one RCT showed that selective hepatic vascular exclusion (SHVE) had less blood loss and liver ischemic injury than Pringle maneuver. CONCLUSION: Due to the great variations in these studies, it is difficult to draw a definitive conclusion on the best technique of hepatic vascular control.

Design of a robust guidance law via active disturbance rejection control

Focusing on the three-dimensional guidance problem in case of target maneuvers and response delay of the autopilot, the missile guidance law utilizing active disturbance rejection control （ADRC） is proposed. Based on the nonlinear three-dimensional missile target engagement kinematics, the guidance model is es- tablished, The target acceleration is treated as a disturbance and the dynamics of the autopilot is considered by using a first-order model. A nonlinear continuous robust guidance law is designed by using a cascaded structure ADRC controller. In this method the disturbance is estimated by using the extended state observer （ESO） and compensated during each sampling period. Simulation results show that the proposed cascaded loop structure is a viable solution to the guidance law design and has strong robustness with respect to target maneuvers and response delay of the autopilot.

Vibration control of flexible spacecraft actuated by piezoceramics via variable structure strategy

This paper presented a hybrid control scheme to vibration reduction of flexible spacecraft during rotational maneuver by using variable structure output feedback control （VSOFC） and piezoelectric materials. The control configuration included the attitude controller based on VSOFC method and vibration attenuator designed by constant-gain negative velocity feedback control. The attitude controller consisted of a linear feedback term and a discontinuous feedback term. With the presence of this attitude controller, an additional flexible control system acting on the flexible parts can be designed for vibration control. Compared with conventional proportional-derivative （PD） control, the developed control scheme guarantees not only the stability of the closed-loop system, but also yields better performance and robustness in the presence of parametric uncertainties and externai disturbance. Simulation results are presented for the spacecraft model to show the effectiveness of the proposed control techniques.