Municipal sludge as landfill barrier material

The aim of this research is to find substitute barrier materials for natural clay from two kinds of municipal sludge: waterworks sludge(S_w) and dredging sludge(S_d). Laboratory tests were performed firstly to determine their Atterberg limits and hydraulic conductivity. Based on the results, the use of waterworks sludge was recommended. Then, shear strength tests were performed and it was found the shear resistance property of waterworks sludge is strong enough to maintain slope stability. In order to evaluate the possibility of secondary pollution, the heavy metal contents of waterworks sludge was determined and the results indicated that secondary pollution is unlikely happened. Finally, economic analysis proves that reusing waterworks sludge as barrier will reduce the lost a great for both landfill and waterworks. Based on the results, waterworks sludge was proposed to use and a further long-term simulated landfill test was suggested.

The effect of metal ions with different valences on the retardation of soil–bentonite barrier materials and its mechanism

In this paper, with K＋, Ca2＋ and Fe3＋ as the objects of study, retardation of soil-bentonite （SB） barrier materials for metal ions with different valences is investigated, and the adsorption mechanism, migration patterns and permeation behavior are explored so as to provide a theoretical basis for their application. The results show that the adsorption process for metal ions with different valences by SB barrier materials is fast, and the higher the valence, the greater the adsorption capacity. The fitting of the adsorption process conforms to pseudo-second-order adsorption kinetics and Langmuir-Freundlich adsorption equation, which explains that chemical adsorption is the dominating state and that the SB surface has certain heterogeneity. The permeability coefficient of K＋, Ca2＋ and Fe3＋ in SB each has a maximum and the higher the valence, the sooner the maximum appears. Also the higher the valence, the more obvious the effect on SB retardation performance; and the sooner the ion breaks through the barrier wall completely, that is, the wall＇s retardation performance for higher valent ions may decline.

A bionic controllable strain membrane for cell stretching at air–liquid interface inspired by papercutting

Lung diseases associated with alveoli,such as acute respiratory distress syndrome,have posed a long-term threat to human health.However,an in vitro model capable of simulating different deformations of the alveoli and a suitable material for mimicking basement membrane are currently lacking.Here,we present an innovative biomimetic controllable strain membrane(BCSM)at an air–liquid interface(ALI)to reconstruct alveolar respiration.The BCSM consists of a high-precision three-dimensional printing melt-electrowritten polycaprolactone(PCL)mesh,coated with a hydrogel substrate—to simulate the important functions(such as stiffness,porosity,wettability,and ALI)of alveolar microenvironments,and seeded pulmonary epithelial cells and vascular endothelial cells on either side,respectively.Inspired by papercutting,the BCSM was fabricated in the plane while it operated in three dimensions.A series of the topological structure of the BCSM was designed to control various local-area strain,mimicking alveolar varied deformation.Lopinavir/ritonavir could reduce Lamin A expression under over-stretch condition,which might be effective in preventing ventilator-induced lung injury.The biomimetic lung-unit model with BCSM has broader application prospects in alveoli-related research in the future,such as in drug toxicology and metabolism.

High-entropy(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))2Hf_(2)O_(7) ceramic: A promising thermal barrier coating material

Thermal barrier coating(TBC)materials perform an increasingly important role in the thermal or chemical protection of hot components in a gas turbine.In this study,a novel high entropy hafnate(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) was synthesized by solution combustion method and investigated as a potential TBC layer.The as-synthesized(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) possesses a pure single disordered fluorite phase with a highly homogeneous distribution of rare earth(RE)cations,exhibiting prominent phase stability and excellent chemical compatibility with Al_(2)O_(3) even at 1300°C.Moreover,(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) demonstrates a more sluggish grain growth rate than Y_(2)Hf_(2)O_(7).The thermal conductivity of(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7)(0.73-0.93 W m^(-1)K^(-1))is smaller than those of components RE_(2)Hf_(2)O_(7) and many high entropy TBC materials.Beside,the calculated thermal expansion coefficient(TEC)of(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7)(10.68×10^(-6)/K,1100°C)is smaller than that of yttriastabilized zirconia(YSZ).Based on the results of this work,(Y_(0.2)Gd_(0.2)Dy_(0.2)Er_(0.2)Yb_(0.2))_(2)Hf_(2)O_(7) is suitable for the next generation TBC materials with outstanding properties.

High entropy defective fluorite structured rare-earth niobates and tantalates for thermal barrier applications

Rare-earth tantalates and niobates(REjTaO7 and REjNbO7)have been considered as promising candidate thermal barrier coating(TBC)materials in next generation gas-turbine engines due to their ultra-low thermal conductivity and better thermal stability than yttria-stabilized zirconia(YSZ).However,the low Vickers hardness and toughness are the main shortcomings of RE;TaO-and REjNbOr that limit their applications as TBC materials.To increase the hardness,high entropy(Yu3Ybu3Er/3)sTaOr,(Y13YbnErns)NbO,and(Sm1/6Eu1/6Y 1/6Yb1/6Lu1/6Er1/6)3(Nb1/2Ta1/2)O7 are designed and synthesized in this study.These high entropy ceramics exhibit high Vickers hardness(10.912.0 GPa),close thermal expansion coefficients to that of single-principal-component RE3TaO,and RE;NbO,(7.9×10^-6-10.8×10-6 C-1 at room temperature),good phase stability,and good chemical compatibility with thermally grown Al2O3,which make them promising for applications as candidate TBC materials.

Calcium-magnesium-alumina-silicate(CMAS)resistant high entropy ceramic(Y_(0.2)Gd_(0.2)Er_(0.2)Yb_(0.2)Lu_(0.2))_(2)Zr_(2)O_(7) for thermal barrier coatings

A novel high-entropy material,(Y_(0.2)Gd_(0.2)Er_(0.2)Yb_(0.2)Lu_(0.2))_(2)Zr_(2)O_(7)was successfully synthesized by the solid state reaction method and spark plasma sintering,and investigated as a promising thermal barrier coating material.Rare-earth elements were distributed homogeneously in the pyrochlore structure.It was found that the prepared high-entropy ceramic maintains pyrochlore structure at the temperature up to 1600℃,and it possesses a similar thermal expansion coefficient(10.2×10^(−6)K^(−1) at 25-900℃)to that of YSZ,low thermal conductivity(<0.9 W m^(-1)K^(−1) at 100-1000℃)and good CMAS resistance(infiltration depth is 22μm after annealed at 1300℃for 24 h).The corrosion process was investigated,and RE elements distributing homogeneously in(Y_(0.2)Gd_(0.2)Er_(0.2)Yb_(0.2)Lu_(0.2))_(2)Zr_(2)O_(7)show different diffusion rates in CMAS.RE^(3+) with a larger radius(closer to Ca^(2+))is easier to react with CMAS to form an apatite phase.

BE-SONOS flash memory along with metal gate and high-k dielectrics in tunnel barrier and its impact on charge retention dynamics

We investigate the effect of a high-k dielectric in the tunnel layer to improve the erase speed-retention trade-off. Here, the proposed stack in the tunnel layer is AlLaO_3/Hf AlO/SiO_2. These proposed materials possess low valence band offset with high permittivity to improve both the erase speed and retention time in barrier engineered silicon-oxide-nitride-oxide-silicon（BE-SONOS）. In the proposed structure Hf Al O and AlLaO_3 replace Si_3N_4 and the top SiO_2 layer in a conventional oxide/nitride/oxide（ONO） tunnel stack. Due to the lower conduction band offset（CBO） and high permittivity of the proposed material in the tunnel layer, it offers better program/erase（P/E） speed and retention time. In this work the gate length is also scaled down from 220 to 55 nm to observe the effect of high-k materials while scaling, for the same equivalent oxide thickness（EOT）. We found that the scaling down of the gate length has a negligible impact on the memory window of the devices. Hence, various investigated tunnel oxide stacks possess a good memory window with a charge retained up to 87.4%（at room temperature） after a period of ten years. We also examine the use of a metal gate instead of a polysilicon gate, which shows improved P/E speed and retention time.

High-entropy ferroelastic(10RE_(0.1))TaO_(4) ceramics with oxygen vacancies and improved thermophysical properties

The primary purpose of this work is to optimize the thermophysical properties of rare-earth tan-talate ceramics using the high-entropy effect.Here,the high-entropy rare-earth tantalate ceramic(Y_(0.1)Nd_(0.1)Sm_(0.1)Gd_(0.1)Dy_(0.1)Ho_(0.1)Er_(0.1)Tm_(0.1)Yb_(0.1)Lu_(0.1))TaO_(4)((10RE_(0.1))TaO_(4))is synthesized successfully.The lat-tice distortion and oxygen vacancy concentration are characterized firstly in the rare-earth tantalates.Notably,compared with single rare-earth tantalates,the thermal conductivity of(10RE_(0.1))TaO_(4) is reduced by 16%-45%at 100℃ and 22%-45%at 800℃,and it also presents lower phonon thermal conductivity in the entire temperature range from 100 to 1200℃.The phonon thermal conductivity(1.0-2.2 W m^(-1) K^(-1),100-1200℃)of(10RE_(0.1))TaO_(4) is lower than that of the currently reported high-entropy four-,five-and six-component rare-earth tantalates.This is the result of scattering by the ferroelastic domain,lattice distortion associated with size and mass disorder,and point defects,which target low-,mid-and high-frequency phonons.Furthermore,(10RE_(0.1))TaO_(4),as an improved candidate for thermal barrier coatings materials(TBCs),has a higher thermal expansion coefficient(10.5×10^(-6)K^(-1) at 1400℃),lower Young’s modulus(123 GPa)and better high-temperature phase stability than that of single rare-earth tantalates.

(La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4: A high-entropy rare-earth phosphate monazite ceramic with low thermal conductivity and good compatibility with Al2O3

Low thermal conductivity, matched thermal expansion coefficient and good compatibility are general requirements for the environmental/thermal barrier coatings(EBCs/TBCs) and interphases for Al2O3 f/Al2O3 composites. In this work, a novel high-entropy(HE) rare-earth phosphate monazite ceramic (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 is designed and successfully synthesized. This new type of HE rare-earth phosphate monazite exhibits good chemical compatibility with Al2O3, without reaction with Al2O3 as high as 1600℃ in air. Moreover, the thermal expansion coefficient(TEC) of HE (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4(8.9 × 10^-6/℃ at 300–1000℃) is close to that of Al2O3. The thermal conductivity of HE (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 at room temperature is as low as 2.08 W·m^-1·K^-1, which is about 42% lower than that of La PO4. Good chemical compatibility, close TEC to that of Al2O3, and low thermal conductivity indicate that HE (La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4 is suitable as a candidate EBC/TBC material and an interphase for Al2O3 f/Al2O3 composites.

Interaction of multicomponent disilicate(Yb_(0.2)Y_(0.2)Lu_(0.2)Sc_(0.2)Gd_(0.2))_(2)Si_(2)O_(7)with molten calcia-magnesia-aluminosilicate

Environmental barrier coating(EBC)materials that are resistant against molten calcia-magnesia-aluminosilicate(CMAS)corrosion are urgently required.Elerein,multicomponent rare-earth(RE)disilicate((Yb_(0.2)Y_(0.2)Lu_(0.2)Sc_(0.2)Gd_(0.2))_(2)Si_(2)O_(7),(5RE)_(2)Si_(2)O_(7))was investigated with regard to its CMAS interaction behavior at 1400°C.Compared with the individual RE disilicates,the(5RE)2Si2C>7 material exhibited improved resistance against CMAS attack.The dominant process involved in the interaction of(5RE)_(2)Si_(2)O_(7)with CMAS was reaction-recrystallization.A dense and continuous reaction layer protected the substrate from rapid corrosion at high temperatures.The results demonstrated that multicomponent strategy of RE species in disilicate can provide a new perspective in the development of promising EBC materials with improved corrosion resistance.

High-entropy Sm_(2)B_(2)O_(7)(B=Ti,Zr,Sn,Hf,Y,Yb,Nb,and Ta) oxides with highly disordered B-site cations for ultralow thermal conductivity

Materials with ultralow thermal conductivity and good thermal stability are of great interest in numerous applications such as energy storage and conversion devices,and thermal insulation components.In this work,a family of high-entropy Sm_(2)B_(2)O_(7)(B=Ti,Zr,Sn,Hf,Y,Yb,Nb,and Ta) oxides with highly disordered cations on the B-site has been synthesized by introducing large atomic-size mismatch,mass and charge disorder.Through tuning the composition,the high-entropy Sm_(2)B_(2)O_(7) oxides can be engineered from pyrochlore to fluorite structure,accompanied with an order-disorder transition.The pyrochlore Sm_(2)(Nb_(0.2)Sn_(0.2)Ti_(0.2)Y_(0.2)Zr_(0.2))_(2)O_(7) and fluorite Sm_(2)(Nb_(0.2)Ta_(0.2)Y_(0.2)Yb_(0.2)Zr_(0.2))_(2)O_(7) exhibit low thermal conductivities of 1.35 W·m^(-1)·K^(-1) and 1.23 W·m^(-1)·K^(-1),respectively,indicating their good thermal insulation.In addition,the high-entropy fluorite Sm_(2)(Nb_(0.2)Ta_(0.2)Y_(0.2)Yb_(0.2)Zr_(0.2))_(2)O_(7) also shows average thermal expansion coefficient of 10.2 × 10^(-6)℃^(-1) and high-temperature stability even after thermal exposure at 1600 °C in air for 30 h.These results indicate that the high-entropy Sm_(2)B_(2)O_(7)(B=Ti,Zr,Sn,Hf,Y,Yb,Nb,and Ta) can be promising candidates for thermal barrier coatings and thermally insulators.