期刊文献+
共找到447篇文章
< 1 2 23 >
每页显示 20 50 100
A Transmission-Type Electrically Tunable Polarizer Based on Graphene Ribbons at Terahertz Wave Band 被引量:1
1
作者 唐祎程 朱志宏 +4 位作者 张检发 郭楚才 刘肯 袁晓东 秦石乔 《Chinese Physics Letters》 SCIE CAS CSCD 2015年第2期91-94,共4页
We theoretically and numerically demonstrate that a transmission-type electrically tunable polarizer can be realized by using graphene ribbons supported on a dielectric film with a graphene sheet behind. The polarizat... We theoretically and numerically demonstrate that a transmission-type electrically tunable polarizer can be realized by using graphene ribbons supported on a dielectric film with a graphene sheet behind. The polarization mechanism originates from the antenna plasmon resonance of graphene stripes. The results of full-wave numerical simulations reveal that transmittance of 0.70 for one polarization and 0.0073 for another polarization can be obtained at normal incidence. The transmission-type electrically tunable polarizer provides and facilitates a variety of applications, including filtering, detecting, and imaging. 展开更多
关键词 THz A Transmission-Type Electrically Tunable Polarizer based on Graphene Ribbons at Terahertz Wave band
下载PDF
Tunable Band Gap in Piezoelectric Composite Rod Based on the Inter-Coupling Effect
2
作者 方泽群 侯志林 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第5期60-64,共5页
The longitudinal wave propagating in one-dimensional periodic piezoelectric composite rod with inter-coupling between different piezoelectric segments is investigated. The analytical formulae for such a structure are ... The longitudinal wave propagating in one-dimensional periodic piezoelectric composite rod with inter-coupling between different piezoelectric segments is investigated. The analytical formulae for such a structure are shown and the dispersion relation is calculated. The results show that, by introducing the inter-coupling between the different piezoelectric segments, which is accomplished by serially connecting every n piezoelectric segment into supercells, some tunable Bragg band gaps can accordingly be opened in the low frequency region. The investigation could provide a new guideline for the tunable phononic crystal under passive control. 展开更多
关键词 UUT Tunable band Gap in Piezoelectric Composite Rod based on the Inter-Coupling Effect TP BG TN
下载PDF
Study of band 3 protein and intraerythrocytic acid-base regulation under chronic isobaric hypoxia and hypoxia-hypercapnia in 
3
作者 杨晓静 毛宝龄 钱桂生 《Journal of Medical Colleges of PLA(China)》 CAS 1995年第3期213-219,共7页
The changes of the structure and content of the erythrocyte membrane band 3 protein and its function of anion transport and blood gases inside and out of the erythrocytes were observed under isobaric hypoxia and hypox... The changes of the structure and content of the erythrocyte membrane band 3 protein and its function of anion transport and blood gases inside and out of the erythrocytes were observed under isobaric hypoxia and hypoxia-hypercapnia in rats. It was found t 展开更多
关键词 HYPOXIA HYPERCAPNIA band 3 PROTEIN ACID-base REGULATION rat
下载PDF
An Overview of the Multi-Band and the Generalized BCS Equations-Based Approaches to Deal with Hetero-Structured Superconductors
4
作者 G. P. Malik 《Open Journal of Microphysics》 2018年第2期7-13,共7页
We trace the conceptual basis of the Multi-Band Approach (MBA) and recall the reasons for its wide following for composite superconductors (SCs). Attention is then drawn to a feature that MBA ignores: the possibility ... We trace the conceptual basis of the Multi-Band Approach (MBA) and recall the reasons for its wide following for composite superconductors (SCs). Attention is then drawn to a feature that MBA ignores: the possibility that electrons in such an SC may also be bound via simultaneous exchanges of quanta with more than one ion-species—a lacuna which is addressed by the Generalized BCS Equations (GBCSEs). Based on several papers, we give a concise account of how this approach: 1) despite employing a single band, meets the criteria satisfied by MBA because a) GBCSEs are derived from a temperature-incorporated Bethe-Salpeter Equation the kernel of which is taken to be a “superpropagator” for a composite SC-each ion-species of which is distinguished by its own Debye temperature and interaction parameter and b) the band overlapping the Fermi surface is allowed to be of variable width. GBCSEs so-obtained reduce to the usual equations for the Tc and Δ of an elemental SC in the limit superpropagator → 1-phonon propagator;2) accommodates moving Cooper pairs and thereby extends the scope of the original BCS theory which restricts the Hamiltonian at the outset to terms that correspond to pairs having zero centre-of-mass momentum. One can now derive an equation for the critical current density (j0) of a composite SC at T = 0 in terms of the Debye temperatures of its ions and their interaction parameters— parameters that also determine its Tc and Δs;3) transforms the problem of optimizing j0 of a composite SC, and hence its Tc, into a problem of chemical engineering;4) provides a common canopy for most composite SCs, including those that are usually regarded as outside the purview of the BCS theory and have therefore been called “exceptional”, e.g., the heavy-fermion SCs;5) incorporates s±-wave superconductivity as an in-built feature and can therefore deal with the iron-based SCs, and 6) leads to presumably verifiable predictions for the values of some relevant parameters, e.g., the effective mass of electrons, for the SCs for which it has been employed. 展开更多
关键词 Hetero-Structured SUPERCONDUCTORS MULTI-band and Generalized BCS Equations-based APPROACHES Unified Treatment of Cuprates and Fe-based SUPERCONDUCTORS Quest for Clues about Raising Tc
下载PDF
欠采样下的多频带通信信号高精度载频估计
5
作者 黄翔东 宋金水 李燕平 《电子与信息学报》 EI CAS CSCD 北大核心 2024年第3期906-913,共8页
为根本解决当前主流的基于调制宽带转化器(MWC)的欠采样频率估计方法存在的3个问题,即采样通道数目多、载频估计精度低、信源频带分布稀疏度条件高,该文提出基于互素谱相位差校正的通信信号载频估计方法。通过将两路互素欠采样取代多路... 为根本解决当前主流的基于调制宽带转化器(MWC)的欠采样频率估计方法存在的3个问题,即采样通道数目多、载频估计精度低、信源频带分布稀疏度条件高,该文提出基于互素谱相位差校正的通信信号载频估计方法。通过将两路互素欠采样取代多路调制宽带转化器欠采样,克服了其耗费欠采样通道数目多的缺陷;基于此,既推导出全景谱谱峰位置与两路互素输出IDFT支路序号对的映射关系,又推导出相邻快拍下该序号对的IDFT相位差与载频值的解析关系,从而克服了主流方法的载频估计精度低的缺陷;通过将最小尺寸全相位滤波器对半分解方法融入原型滤波器设计,构造出两路并行互素谱分析器,还彻底克服了对信源频带分布稀疏度条件高的依赖。仿真表明,相比于主流方法,该文方法仅需耗费不足其1/2的样本数量,载频估计的相对误差降至其1/20以下。 展开更多
关键词 载频估计 互素欠采样 调制宽带转换器 相位差频率校正 多频带通信信号
下载PDF
铁基超导体中的马约拉纳零能模及其阵列构筑
6
作者 李更 丁洪 +1 位作者 汪自强 高鸿钧 《物理学报》 SCIE EI CAS CSCD 北大核心 2024年第3期1-15,共15页
马约拉纳零能模服从非阿贝尔统计,其编织操作可用于构筑拓扑量子比特,是拓扑量子计算的基本单元,可从原理上解决量子计算中环境噪声带来的退相干问题.现有的马约拉纳零能模平台包括复合异质结构,如拓扑绝缘体/超导体、半导体纳米线/超... 马约拉纳零能模服从非阿贝尔统计,其编织操作可用于构筑拓扑量子比特,是拓扑量子计算的基本单元,可从原理上解决量子计算中环境噪声带来的退相干问题.现有的马约拉纳零能模平台包括复合异质结构,如拓扑绝缘体/超导体、半导体纳米线/超导体或一维磁性原子链/超导体等,以及单一材料,如2M-WS_(2),4Hb-TaS_(2)和铁基超导体等.铁基超导体中的马约拉纳零能模具有材料平台简单、零能模纯净以及存活温度较高等一系列优势,引起了广泛关注.最近,大面积、有序和可调控的马约拉纳零能模晶格阵列在铁基超导体LiFeAs中被观测到,为未来的拓扑量子计算提供了一个理想平台.本综述首先回顾铁基超导体中马约拉纳零能模的实验观测,其中将重点介绍FeTe_(0.55)Se_(0.45),(Li_(0.84)Fe_(0.16))OHFeSe,CaKFe_(4)As_(4)和LiFeAs等材料体系.接着介绍给出铁基超导体中马约拉纳零能模关键性实验证据的一系列工作.然后进一步详细介绍近期LiFeAs中观测到有序和可调马约拉纳零能模晶格阵列的工作.最后给出总结和对未来马约拉纳领域研究的展望. 展开更多
关键词 铁基超导体 拓扑能带结构 马约拉纳零模
下载PDF
基于TSV技术的Ka频段硅基天线设计
7
作者 贺鹏超 陈建忠 +2 位作者 王逸琳 边明明 张珂 《火控雷达技术》 2024年第2期84-89,共6页
TSV(Through-Silicon Via硅通孔)技术是现代集成电路设计的新型工艺。基于此工艺,针对射频通信系统小型化、高集成度的要求分别设计了工作于Ka频段的硅基多端口天线和单端口集成天线。整体结构采用CPW(Co-Planar Waveguide共面波导)和TS... TSV(Through-Silicon Via硅通孔)技术是现代集成电路设计的新型工艺。基于此工艺,针对射频通信系统小型化、高集成度的要求分别设计了工作于Ka频段的硅基多端口天线和单端口集成天线。整体结构采用CPW(Co-Planar Waveguide共面波导)和TSV结合的方式实现了对天线的馈电。在此基础上,分别设计了中心频率为35GHz的2X2四端口天线阵和中心频率为35.5GHz的单端口集成天线。仿真结果表明,天线阵列的相对带宽分别为2.88%和6.56%,增益约为4.57dBi和4.06dBi。 展开更多
关键词 TSV工艺 硅基天线 KA频段
下载PDF
一种基于超宽带基站设置虚拟围栏的手术室移动医疗设备定位方法
8
作者 靳祖光 《医疗装备》 2024年第10期23-26,30,共5页
针对医院手术室各手术间存在大量移动医疗设备交叉使用难以实时定位管控的难题,该研究提出一种时效性高、易于部署且定位准确度相对较高的基于UWB技术的实时定位方法。该方法包括对超宽带(UWB)基站的拓扑布局,在手术室走廊、设备间内应... 针对医院手术室各手术间存在大量移动医疗设备交叉使用难以实时定位管控的难题,该研究提出一种时效性高、易于部署且定位准确度相对较高的基于UWB技术的实时定位方法。该方法包括对超宽带(UWB)基站的拓扑布局,在手术室走廊、设备间内应用改进的飞行时间(TOF)双边双向测距定位法定位,在手术间入口设置虚拟围栏判断设备是否进入。经试验,该方法可大幅度降低UWB基站布置数量,具备厘米级定位精度和较高识别率,可替代传统的手术室移动医疗设备人工定位管控方式。 展开更多
关键词 手术室 移动医疗设备 室内定位 超宽带基站 飞行时间 虚拟围栏
下载PDF
铜锌锡硫基薄膜太阳能电池中锌基缓冲层的研究进展
9
作者 张琳 袁妍妍 +2 位作者 吴昕智 陈阳 王近 《江苏科技大学学报(自然科学版)》 CAS 2024年第2期23-30,共8页
由多层结构组成的薄膜太阳能电池具有低成本、易生产、稳定性高等优点,解决了晶体太阳能电池原料要求高以及制备工艺复杂等缺点,其中的缓冲层材料作为薄膜太阳能电池中的重要组成部分一直是研究重点.近年来,无毒、环保且能获得较高光电... 由多层结构组成的薄膜太阳能电池具有低成本、易生产、稳定性高等优点,解决了晶体太阳能电池原料要求高以及制备工艺复杂等缺点,其中的缓冲层材料作为薄膜太阳能电池中的重要组成部分一直是研究重点.近年来,无毒、环保且能获得较高光电效率的缓冲层材料引起学者的广泛研究.文中以铜锌锡硫基太阳能电池为例,综述了有关硫化锌(ZnS)、氧化锌(ZnO)、氧硫化锌(Zn(O,S))、氧化锌锡(ZTO)和氧化锌镁(ZMO)缓冲层材料在薄膜太阳能电池中的应用.详细阐述了5种缓冲层材料的制备方法、性能变化、应用前景以及对太阳能电池转换效率的影响,以期为未来制备高效环保薄膜太阳能电池提供有效参考. 展开更多
关键词 薄膜太阳能电池 锌基缓冲层 转换效率 能带匹配
下载PDF
Temperature Evolution of Energy Gap and Band Structure in the Superconducting and Pseudogap States of Bi_2Sr_2CaCu_2O_(8+δ) Superconductor Revealed by Laser-Based Angle-Resolved Photoemission Spectroscopy
10
作者 孙璇 张文涛 +9 位作者 赵林 刘国东 顾根大 彭钦军 王志敏 张申金 杨峰 陈创天 许祖彦 周兴江 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第1期90-94,共5页
We carry out detailed momentum-dependent and temperature-dependent measurements on Bi_2Sr_2CaCu_2O_(8+δ)(Bi2212) superconductor in the superconducting and pseudogap states by super-high resolution laser-based an... We carry out detailed momentum-dependent and temperature-dependent measurements on Bi_2Sr_2CaCu_2O_(8+δ)(Bi2212) superconductor in the superconducting and pseudogap states by super-high resolution laser-based angleresolved photoemission spectroscopy. The precise determination of the superconducting gap for the nearly optimally doped Bi2212(T_c= 91 K) at low temperature indicates that the momentum-dependence of the superconducting gap deviates from the standard d-wave form(cos(2Φ)). It can be alternatively fitted by including a high-order term(cos(6Φ)) in which the next nearest-neighbor interaction is considered. We find that the band structure near the antinodal region smoothly evolves across the pseudogap temperature without a signature of band reorganization which is distinct from that found in Bi_2Sr_2CuO_(6+δ) superconductors. This indicates that the band reorganization across the pseudogap temperature is not a universal behavior in cuprate superconductors.These results provide new insights in understanding the nature of the superconducting gap and pseudogap in high-temperature cuprate superconductors. 展开更多
关键词 Superconductor Revealed by Laser-based Angle-Resolved Photoemission Spectroscopy Temperature Evolution of Energy Gap and band Structure in the Superconducting and Pseudogap States of Bi_2Sr_2CaCu_2O Bi ARPES Figure Sr
下载PDF
松香对NR力学性能及水性胶浆附着力的影响
11
作者 黄鑫 薛斌 邓涛 《橡塑技术与装备》 CAS 2024年第2期50-53,共4页
研究了松香对NR硫化特性以及力学性能的影响,同时研究了松香作为增黏树脂加入水性胶浆体系对胶浆黏合性能的影响。结果表明,松香用量的增大,NR硫化胶的伸长率上升,定伸应力和硬度下降,拉断强度在6份时达到最大;在胶浆黏合性能方面,松香... 研究了松香对NR硫化特性以及力学性能的影响,同时研究了松香作为增黏树脂加入水性胶浆体系对胶浆黏合性能的影响。结果表明,松香用量的增大,NR硫化胶的伸长率上升,定伸应力和硬度下降,拉断强度在6份时达到最大;在胶浆黏合性能方面,松香对剥离强度的影响与对硫化胶拉断强度的影响表现出一定的一致性,在6份时达到最大。 展开更多
关键词 V带 包布胶 水性胶浆 增黏树脂 剥离强度
下载PDF
铋基环保无机颜料研究进展
12
作者 温都苏 《中国陶瓷》 CAS CSCD 北大核心 2024年第4期57-64,共8页
氧化铋、钒酸铋等铋基材料因具有独特的能带结构,在无机颜料、光催化等领域受到广泛关注。文章主要关注此类材料呈色原理、能带结构调控方法、光学性质等,综述了国内外最新研究进展状况,展望了铋基无机颜料的未来发展方向。
关键词 铋基颜料 氧化铋 钒酸铋 能带结构 带隙
下载PDF
小型化多频基站天线的设计
13
作者 黎华鹏 朱志明 《移动信息》 2024年第3期15-17,20,共4页
文中设计了一种工作频段为698~960MHz的新型低频辐射单元,该辐射单元上方可嵌套4个工作频段为1700~2700MHz的高频辐射单元,实现一列低频两列高频的多频天线,底板宽度只有280mm,与常规三频天线的宽度380mm相比,宽度减小约26%,减小了天线... 文中设计了一种工作频段为698~960MHz的新型低频辐射单元,该辐射单元上方可嵌套4个工作频段为1700~2700MHz的高频辐射单元,实现一列低频两列高频的多频天线,底板宽度只有280mm,与常规三频天线的宽度380mm相比,宽度减小约26%,减小了天线尺寸,实现了天线的小型化设计。仿真结果表明,该方案在698~960MHz及1700~2700MHz的水平面方向上,能满足常规基站天线的需求。 展开更多
关键词 基站天线 多频 嵌套 移动通信
下载PDF
退火处理对Pt基块体金属玻璃塑性动力学行为的影响
14
作者 易梦丽 王驰 +3 位作者 赖建平 李定骏 袁卫锋 余家欣 《力学学报》 EI CAS CSCD 北大核心 2024年第1期173-182,共10页
采用退火的热诱导方法向Pt基块体金属玻璃(Pt-BMG)基体内原位引入纳米晶,通过纳米压痕实验,考察了Pt-BMG在铸态和在玻璃转变温度Tg之上(250℃)退火15 min,2 h和6 h的力学性能和塑性动力学行为.研究结果表明,退火时间从15 min增加到6 h时... 采用退火的热诱导方法向Pt基块体金属玻璃(Pt-BMG)基体内原位引入纳米晶,通过纳米压痕实验,考察了Pt-BMG在铸态和在玻璃转变温度Tg之上(250℃)退火15 min,2 h和6 h的力学性能和塑性动力学行为.研究结果表明,退火时间从15 min增加到6 h时,Pt-BMG的结晶度从34%增加到57%,平均晶粒尺寸从25.6 nm增加到38.3 nm,硬度和折合模量分别从5.66 GPa和133.83 GPa增加到8.65 GPa和182.89 GPa,同时载荷-位移曲线上的锯齿流变行为呈现从可明显观察到不连续的位移突变到比较平滑的变化规律.通过分子动力学模拟进一步证明,随着纳米晶尺寸的增加,剪切转变区的激活与剪切带的成核呈现先促进后抑制、先增加后减小的趋势.这是由于金属玻璃在塑性变形过程中,小尺寸纳米晶会被剪切带所包裹或溶解,促进了金属玻璃塑性变形的形成;而大尺寸纳米晶在承受载荷时,在晶体内部产生了位错和滑移,进一步抑制了剪切带的成核与传播.本文结合纳米压痕实验和分子动力学模拟,从原子尺度上揭示了纳米晶的尺寸影响非晶合金塑性变形的内在机理,为设计理想性能的金属玻璃提供了有效的实验基础与理论支撑. 展开更多
关键词 退火 Pt基块体金属玻璃 塑性动力学 分子动力学模拟 纳米晶 剪切带
下载PDF
Band Structure of New ReFeAsO Superconductors 被引量:1
15
作者 Sergei P. Kruchinin Arkadiy A. Zolotovsky Hyun-Tak Kim 《Journal of Modern Physics》 2013年第5期608-611,共4页
We investigate the band structure of Fe-based superconductors using the first-principle method of density-functional theory. We calculated the band structure and the density of states at the Fermi level for ReFeAsO (R... We investigate the band structure of Fe-based superconductors using the first-principle method of density-functional theory. We calculated the band structure and the density of states at the Fermi level for ReFeAsO (Re = Sm, Er) superconductors. Our calculations indicate that the maximum critical superconducting transition temperature Tc will be observed for compounds with Sm and Er at 55 and 46 K, respectively. 展开更多
关键词 IRON-baseD SUPERCONDUCTORS band Structure Density of State SUPERCONDUCTING CRITICAL Temperature
下载PDF
NONLINEAR CHARACTERIZATION OF CONCURRENT DUAL-BAND RF POWER AMPLIFIERS
16
作者 Hui Ming Liu Taijun +3 位作者 Ye Yan Zhang Haili Shen Dongya Li Liang 《Journal of Electronics(China)》 2012年第3期215-221,共7页
In this paper, the synchronous concurrent dual-band RF signal is used to drive the RF Power Amplifier (PA). The nonlinear characterization of a concurrent dual-band RF PA is discussed while two band signals in the dua... In this paper, the synchronous concurrent dual-band RF signal is used to drive the RF Power Amplifier (PA). The nonlinear characterization of a concurrent dual-band RF PA is discussed while two band signals in the dual-band are modulated by CDMA2000 and WCDMA signals. When the two band signals in the dual-band of the PA are modulated with the same signals, it is found that the nonlinearity of the PA can be expressed by any of the two corresponding baseband data. On the other hand, when the two band signals in the dual-band of the PA are modulated with two different signals, the PA nonlinearity cannot be characterized by any of the two corresponding baseband data. In this case, its nonlinearity has to be denoted by a composite signals consisting of the two baseband signals. Consequently, the requirements for the speed of the A/D converter can be largely reduced. The experimental results with CDMA2000 and WCDMA signals demonstrate the speed of the A/D converter required is only 30 M Sample Per Second (SaPS), but it will be at least 70 M SaPS for the conventional method. 展开更多
关键词 Concurrent dual-band Power Amplifier (PA) Nonlinear characterization Digital base-band Pre-Distortion (DPD)
下载PDF
A Sector Antenna for Mobile Base Station Using MSA Array with Curved Woodpile EBG
17
作者 Rangsan Wongsan Piyaporn Krachodnok Paowphattra Kamphikul 《Open Journal of Antennas and Propagation》 2014年第1期1-8,共8页
This paper presents a sector antenna for base station of mobile phone using microstrip antenna (MSA) array with curved woodpile Electromagnetic Band Gap (EBG). The advantages of this pro- posed antenna are easy fabric... This paper presents a sector antenna for base station of mobile phone using microstrip antenna (MSA) array with curved woodpile Electromagnetic Band Gap (EBG). The advantages of this pro- posed antenna are easy fabrication and installation, high gain, and light weight. Moreover, it pro- vides a fan-shaped radiation pattern , a main beam having a narrow beam width in the vertical di- rection and a wider beamwidth in the horizontal direction, which are appropriate for mobile phone base station. The half-power beamwidths in the H-plane and E-plane are 37.4 and 8.7 de- grees, respectively. The paper also presents the design procedures of a 1 × 8 array antenna using MSAs associated with U-shaped reflector for decreasing their back and side lobes. A Computer Si- mulation Technology (CST) software has been used to compute the reflection coefficient (S11), radiation patterns, and gain of this antenna. The bandwidth, at S11 (?10 dB), is enough, which can be well utilized for 3G base station, with a gain 20.84 dB. 展开更多
关键词 MICROSTRIP ANTENNA Electromagnetic band Gap base STATION
下载PDF
Data preprocessing and preliminary results of the Moon-based Ultraviolet Telescope on the CE-3 lander 被引量:4
18
作者 Wei-Bin Wen Fang Wang +8 位作者 Chun-Lai Li Jing Wang Li Cao Jian-Jun Liu Xu Tan Yuan Xiao Qiang Fu Yan Su Wei Zuo 《Research in Astronomy and Astrophysics》 SCIE CAS CSCD 2014年第12期1674-1681,共8页
The Moon-based Ultraviolet Telescope (MUVT) is one of the payloads on the Chang'e-3 (CE-3) lunar lander. Because of the advantages of having no at- mospheric disturbances and the slow rotation of the Moon, we can... The Moon-based Ultraviolet Telescope (MUVT) is one of the payloads on the Chang'e-3 (CE-3) lunar lander. Because of the advantages of having no at- mospheric disturbances and the slow rotation of the Moon, we can make long-term continuous observations of a series of important celestial objects in the near ultra- violet band (245-340 nm), and perform a sky survey of selected areas, which can- not be completed on Earth. We can find characteristic changes in celestial brightness with time by analyzing image data from the MUVT, and deduce the radiation mech- anism and physical properties of these celestial objects after comparing with a phys- ical model. In order to explain the scientific purposes of MUVT, this article analyzes the preprocessing of MUVT image data and makes a preliminary evaluation of data quality. The results demonstrate that the methods used for data collection and prepro- cessing are effective, and the Level 2A and 2B image data satisfy the requirements of follow-up scientific researches. 展开更多
关键词 Chang'e-3 mission -- the Moon-based Ultraviolet Telescope -- data preprocessing -- near ultraviolet band
下载PDF
A Differential Optical Absorption Spectroscopy Method for X_(CO_2) Retrieval from Ground-Based Fourier Transform Spectrometers Measurements of the Direct Solar Beam
19
作者 HUO Yanfeng DUAN Minzheng +1 位作者 TIAN Wenshou MIN Qilong 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2015年第8期1119-1128,共10页
A differential optical absorption spectroscopy (DOAS)-like algorithm is developed to retrieve the column-averaged dry- air mole fraction of carbon dioxide from ground-based hyper-spectral measurements of the direct ... A differential optical absorption spectroscopy (DOAS)-like algorithm is developed to retrieve the column-averaged dry- air mole fraction of carbon dioxide from ground-based hyper-spectral measurements of the direct solar beam. Different to the spectral fitting method, which minimizes the difference between the observed and simulated spectra, the ratios of multiple channel-pairs--one weak and one strong absorption channel--are used to retrieve Xc02 from measurements of the shortwave infrared (SWIR) band. Based on sensitivity tests, a super channel-pair is carefully selected to reduce the effects of solar lines, water vapor, air temperature, pressure, instrument noise, and frequency shift on retrieval errors. The new algorithm reduces computational cost and the retrievals are le^s sensitive to temperature and H20 uncertainty than the spectral fitting method. Multi-day Total Carbon Column Observing Network (TCCON) measurements under clear-sky conditions at two sites (Tsukuba and Bremen) are used to derive Xc02 for the algorithm evaluation and validation. The DOAS-like results agree very well with those of the TCCON algorithm after correction of an airmass-dependent bias. 展开更多
关键词 CO2 Retrieval ground-based measurement hyper-spectrum shortwave infrared band
下载PDF
超声振动辅助切削三维SiCp/Al复合材料温度仿真研究 被引量:3
20
作者 林洁琼 闫东 +2 位作者 卢明明 李家成 高鑫 《制造技术与机床》 北大核心 2023年第1期36-43,共8页
铝基碳化硅(SiCp/Al)复合材料由于优异的性能在航空航天、汽车生产等领域中得到了广泛的应用。为了深入了解超声振动辅助车削SiCp/Al的切削机理,使用有限元仿真软件ABAQUS建立了超声振动辅助车削SiCp/Al的三维仿真模型,并分别对颗粒、... 铝基碳化硅(SiCp/Al)复合材料由于优异的性能在航空航天、汽车生产等领域中得到了广泛的应用。为了深入了解超声振动辅助车削SiCp/Al的切削机理,使用有限元仿真软件ABAQUS建立了超声振动辅助车削SiCp/Al的三维仿真模型,并分别对颗粒、基体及内聚力模型进行定义。针对所建立的三维模型仿真分别分析了不同切削速度、切削深度、刀具振幅以及刀具振动频率的SiCp/Al切削温度。从仿真结果可以看出:超声振动辅助切削SiCp/Al时,SiC颗粒的温度普遍比Al基体的温度要低,切削过程中工件的温度与切削速度、切削深度和刀具的振幅成正比,但是随着刀具振动频率的增加温度反而会降低,另外在剪切带的切削温度最高。 展开更多
关键词 超声振动辅助车削 铝基碳化硅 切削温度 剪切带 三维仿真模型
下载PDF
上一页 1 2 23 下一页 到第
使用帮助 返回顶部