Effect of the interaction between the chemical and the magnetic ordering on the phase equilibria of iron base alloys

It is well known that the magnetic properties such as the Curie temperature Tmag <sub>C and the mean magnetic moment β of ordered compounds have different values from those of the disordered solutions. For instance, both Tmag c and β of the Ni3Pt （L12） and NiPt （L10） and Tmag <sub>c of the CoPt （L10） and CoPt3 （L12） ordered compounds are strongly depressed due to the ordering compared with those of the metastable disordered Ni-Pt and Co-Pt alloys. On the other hand, the γ’-FeNi3 （L12） and the α’-FeCo （B2） ordered compounds have higher Tmag <sub>c and β values comparing with the disordered solution phases, γ （A1） and α （A2）, respectively. In consequence, the stability of the ordered phase is depressed or enhanced due to the interaction between the chemical and magnetic ordering caused by the decrease or increase of Tmag <sub>c and β values. The purpose of this study is to investigate the effect of the interaction between the chemical and the magnetic ordering on the phase equilibria in the Fe-X（X=Al, Co, Ni, Rh, Si） binary systems.The Gibbs energy of the α（A2）, γ（A1） and liquid phases is described by a sub-regular solution approximation. The ordering contribution to the Gibbs energy ,ΔGorder <sub>m, and deviations of magnetic properties, ΔTmag <sub>c and Δβ, of the ordered compounds, FeAl （B2）, Fe3Al （D03）, FeCo （B2）, FeRh （B2）, FeSi （B2）, Fe3Si （D03） and FeNi3 （L12） is introduced by the split compound energy formalism. Effect of the interaction between the chemical ordering, B2, D03 and L12 and the magnetic ordering on the phase equilibria will be discussed according to the calculated phase diagrams of the Fe-X binary systems.

Review: Progress in the Preparation of Iron Based Magnetic Nanoparticles for Biomedical Applications

With unique physical properties, chemical properties, and biological effects, magnetic nanomaterials are important functional materials in many fields. In the past decades, iron based magnetic nanomaterials have attracted much attention in the biomedicine field due to their superior magnetic properties and great potential in biomedical applications. In particular, magnetic iron oxide nanoparticles(MIONPs) have been playing a crucial role in the biomedicine field because of their diagnostic and therapeutic functions. Meanwhile, MIONPs are benign, low toxic, biocompatible, and biodegradable, so they are the only inorganic magnetic nanomaterials approved by the U.S. Food and Drug Administration(FDA) for clinical use at present. In this review, we mainly introduce the progress in the preparation of iron based magnetic nanomaterials for biomedical applications, including pure iron nanoparticles, iron-based alloy nanoparticles, and MIONPs, with a focus on MIONPs. Also, we summarize the preparation methods of MIONPs and point out the importance of their developments.

Effect of a High Magnetic Field on the Shape of the γ' Precipitates in Cast Nickel-based Superalloy K52

The shape change of the γ＇ precipitates of cast Ni-based superalloy K52 after aging treatment under a high magnetic field was investigated. The results show that duplex γ＇ precipitates are present in the γ matrix after aging treatment with or without the magnetic field. One is the coarse particles with average size of 500 nm; the other is fine spherical γ＇ precipitates with average of 100 nm in diameter. The application of a 10T magnetic field only results in the shape of the coarse γ＇ particles changing from spherical to cuboidal when the alloys subjected to the same heat treatments. This shape change was mainly discussed based on the strain energy increase caused by the difference in magnetostriction between the γ matrix and γ＇ precipitates. The fine γ＇ particles still keep spherical. Further TEM observations shows that a number of γ particles in nano-scale precipitate in the coarse γ＇ particles in the specimens treated without the magnetic field. In addition, it was found that the magnetic field caused the decrease of the hardness in the alloy, and the hardness was associated with the field direction.

A Longitudinal Zeeman Slower Based on Ring-Shaped Permanent Magnets for a Strontium Optical Lattice Clock

We report a longitudinal Zeeman slower based on ring-shaped permanent magnetic dipoles used for the strontium optical lattice clock. The Zeeman slower is composed of 40 permanent magnets with the same outer diameter but different inner diameters. The maximum variation of the axial field from its target values is less than 2%. In most parts of the Zeeman slower, the intensity variations of the field in radial spatial distribution are less than 0.1 roT. With this Zeeman slower, the strontium atoms are slowed down to 95m/s, and approximately 2% of the total atoms are slowed down to less than 50m/s.

PREPARATION AND MAGNETIC PROPERTIES OF POLY(SCHIFF BASE) COMPLEXES CONTAINING PHENANTHROLINE UNITS

Two poly(Schiff base)s (PDBT and PDPE) were synthesized by polycondensation of 1,10-phenanthroline-5,6- dione (PD) with 2,2′-diamino-4,4′-bithiazole (DABT) and 4,4′-diaminodiphenyl ether (DAPE),respectively.The structures of the polymers were determined by FTIR and element analysis.The metal (Fe^(2+),Ni^(2+)) complexes were prepared from the polymers with FeSO_4 or NiSO_4,and the metal contents of the complexes were measured by complexometric titration.The magnetic behaviors of the complexes were examined a...

Hard Magnetic Properties of Sm-Fe-C Based Alloys Prepared by Mechanical Alloying

The structure and magnetic properties of SmyFe100-1.5yC0.5y(y=8～20) alloys prepared by mechanical alloying (MA) from Sm, Fe and graphite have been investigated systematically. In order to improve hard magnetic properties of the alloys prepared by mechanical alloying, a new method consisting of re-milling and re-annealing was developed. After being re-milled and re-annealed, the Curie temperature TC of the Sm-Fe-C alloys changes. The TC of 2:17 phase increases, whereas the TC of 2:14:1 phase decreases. After being re-annealed at low temperatures, the grain sizes of hard phases are smaller than those in the alloys annealed at high temperatures. The effects of Co or Ti substitution for Fe are studied.

Hot-press sintering of MA Fe-based nanocrystalline/amorphous soft magnetic powder

Microstructures and magnetic properties of Fe84Nb7B9,Fe80Ti8B 12 and Fe32Ni36（Nb/V）7Si8B17 powders and their bulk alloys prepared by mechanical alloying（MA） method and hot-press sintering were studied. The results show that: 1) After MA for 20 h,nanocrystalline bcc singl e phase supersaturated solid solution forms in Fe84-Nb7B9 and Fe8 0Ti8B12 alloys,amorphous structure forms in Fe32Ni36Nb7 Si8B17 alloy,duplex microstructure composed of nanocrystalline γ- （FeNi） supersaturated solid solution and trace content of Fe2B phase forms in Fe32Ni36-V7Si8B17 alloy. 2) The decomposition process of supersaturated solid solution phases in Fe84Nb7B9 and Fe80Ti8B 12 alloys happens at 710780 ℃,crystallization reaction in Fe （32）Ni36Nb7Si8B17 alloy happens at 530 ℃（the temperature of peak value） and residual amorphous crystallized further happens at 760 ℃ （the temperature of peak value）,phase decomposition process of supersaturated solid solution at 780 ℃ （the temperature of peak value） and crystallization reaction at 431 ℃ （the temperature of peak value） happens in Fe32Ni36V7S i8B17 alloy. 3) under 900 ℃,30 MPa,（0.5 h） hot-press sintering conditions,bulk alloys with high relative density（94.7%95.8%） can be ob tained. Except that the grain size of Fe84Nb7B9 bulk alloy is large,s uperfine grains （grain size 50200 nm） are obtained in other alloys. Exc ept that single phase microstructure is obtained in Fe80Ti8B12 bul k alloy,multi-phase microstructures are obtained in other alloys. 4) The magne tic properties of Fe80Ti8B12bulk alloy（Bs=1.74 T,Hc= 4.35 kA/m） are significantly superior to those of other bulk alloys,which is r elated to the different phases of nanocrystalline or amorphous powder formed dur ing hot-press sintering process and grain size.

Review of nuclear magnetic resonance studies on iron-based superconductors

The newly discovered iron-based superconductors have triggered renewed enormous research interest in the condensed matter physics community. Nuclear magnetic resonance （NMR） is a low-energy local probe for studying strongly correlated electrons, and particularly important for high-Tc superconductors. In this paper, we review NMR studies on the structural transition, antiferromagnetic order, spin fluctuations, and superconducting properties of several iron-based high-Tc superconductors, including LaFeAsOl_xFx, LaFeAsOl_x, BaFe2As2, Bal_xKxFe2As2, Cao.23Nao.67Fe2As2, BaFe2（Asl_xPx）2, Ba（Fel_xRux）2As2, Ba（Fel_xCox）2As2, Lil＋xFeAs, LiFel_xCoxAs, NaFeAs, NaFel_xCoxAs, KyFe2_xSe2, and （T1,Rb）yFe2_xSe2.

Nuclear magnetic resonance-based metabolomics and metabolic pathway networks from patient-matched esophageal carcinoma,adjacent noncancerous tissues and urine

BACKGROUND Several studies have demonstrated a correlation between esophageal cancer(EC)and perturbed urinary metabolomic profiles,but none has described the correlation between urine metabolite profiles and those of the tumor and adjacent esophageal mucosa in the same patient.AIM To investigate how urinary metabolic phenotypes were linked to the changes in the biochemical landscape of esophageal tumors.METHODS Nuclear magnetic resonance-based metabolomics were applied to esophageal tumor tissues and adjacent normal mucosal tissues alongside patient-matched urine samples.RESULTS Analysis revealed that specific metabolite changes overlapped across both metrics,including glucose,glutamate,citrate,glycine,creatinine and taurine,indicating that the networks for metabolic pathway perturbations in EC,potentially involved in but not limited to disruption of fatty acid metabolism,glucose and glycolytic metabolism,tricarboxylic acid cycle and glutaminolysis.Additionally,changes in most urinary biomarkers correlated with changes in biomarker candidates in EC tissues,implying enhanced energy production for rapid cell proliferation.CONCLUSION Overall,these associations provide evidence for distinct metabolic signatures and pathway disturbances between the tumor tissues and urine of EC patients,and changes in urinary metabolic signature could reflect reprogramming of the aforementioned metabolic pathways in EC tissues.Further investigation is needed to validate these initial findings using larger samples and to establish the underlying mechanism of EC progression.

Effect of high magnetic field on phase transformation temperature and microstructure of Fe-based Alloys

The effect of a high magnetic field up to 30T on phase transformation temperature and microstructure of Fe-based alloys has been reviewed. A high magnetic field accelerates ferrite transformation, changes the morphology of the transformed microstructures and increases the A3 and A1 temperature. In a magnetic field of 30T, the A1 temperature increases by about 37.1℃ for Fe-0.8C, the A3 temperature for pure Fe increases by about 33.1℃. The measured transformation temperature data are not consistent with calculation results using Weiss molecular field theory. Ferrite grains are elongated and aligned along the direction of magnetic field in Fe-0.4C and Fe-0.6C alloys by ferrite transformation, but elongated and aligned structure was not found in pure Fe, Fe-0.05C alloy and Fe-1.5Mn-0.11C-0.1V alloy.

FACILE HYDROTHERMAL SYNTHESIS AND GROWTH KINETICS OF Fe-BASED MAGNETIC NANOPARTICLES

The facile hydrothennal method was used to synthesize Fe3O4 nanoparticles with an average diameter of 1 1nm. The pure body-centered cubic （bcc）-Fe nanoparticles were prepared by reduction of Fe3O4 nanoparticles powder in H2 atmosphere. The structure, morphology and magnetic＇properties of the products were characterized by X-ray powder diffraction （XRD）, transmission electron microscopy （TEM）, thermogravimetric analysis-differential scanning calorimetry （TGA-DSC） and vibrating sample magnetometer （VSM）. The results showed that the as-prepared Fe3O4 nanoparticles had a relatively homogeneous size. The particle diameters became bigger with the increase of reaction time. The growth kinetics of the Fe3O4 nanoparticles was also briefly discussed. The products exhibited superparamagnetic properties at room temperature and the specific saturation magnetization was dependent on the particle sizes.

Polarization-Insensitive Magnetic Quadrupole-Shaped and Electric Quadrupole-Shaped Fano Resonances Based on a Plasmonic Composite Structure

A combined structure with the unit cell consisting of four sub-units with 90° rotation in turn is designed. Each of sub-units is composed of two gold rods in transverse arrangement and one gold rod in longitudinal arrangement. Simulating electromagnetic responses of the structure, we verify that the structure exhibits the double Fano resonances, which originate from the coupling between magnetic quadrupoles and electric dipoles and the coupling between electric quadrupoles and electric dipoles. Simulation results also demonstrate that the structure is polarization-insensitive and shows an analogue of electromagnetically induced transparency at the two Fano resonances. Such a plasmonic structure has potential applications in photoelectric elements.

Competitions of magnetism and superconductivity in FeAs-based materials

Using the numerical unrestricted Hartree-Fock approach, we study the ground state of a two-orbital model describing newly discovered FeAs-based superconductors. We observe the competition of a （0, π） mode spin-density wave and the superconductivity as the doping concentration changes. side where the magnetism and superconductivity coexist. The orbital even, and coexisting sxy ＋dx^2-y^2 wave （even parity）. There might be a small region in the electron-doping superconducting pairing is found to be spin singlet,

Highly Sensitive Fiber-Optic Faraday-Effect Magnetic Field Sensor Based on Yttrium Iron Garnet

The principle and performance of a fiber-optic Faraday-effect magnetic-field sensor based on an yttrium iron garnet (YIG) and two flux concentrations are described. A single polarization-maintaining optical fiber links the sensor head to the source and detection system, in which the technique of phase shift cancellation is used to cancel the phase shift that accumulatein the optical fiber. Flux concentrators were exploited to enhance the YIG crystal magneto-optic sensitivity .The sensor system exhibited a noise-equivalent field of 8 pT/√Hz and a 3 dB bandwidth of ～10 MHz.

Synthesis, Crystal Structure and Magnetic Properties of Heptanuclear Manganese Complexes with Schiff-base Ligand

One new mixed-valence heptanuclear manganese complex, [Mn^ⅡMn^Ⅲ6O2L6-(NaCH3COO)2(CH3COO)4](1)(L = 3-ethoxy-6-((2-hydroxyethyl)imino)methyl) phenol, was synthesized by treating the Schiff-base ligand with Mn(acac)3·4H2O and characterized by elemental analysis, IR spectra, thermogravimetric analyses and X-ray single-crystal diffraction. 1 has a similar new mixed-valence heptanuclear structure. The magnetic measurements indicate that 1 exhibits the antiferromagnetic interactions.

Magneto and Electro-Optic Intensity Modulator Based on Liquid Crystal and Magnetic Fluid Filled Photonic Crystal Fiber

We propose a novel light intensity modulator based on magnetic fluid and liquid crystal（LC） filled photonic crystal fibers（PCFs）. The influences of electric and magnetic fields on the transmission intensity are theoretically and experimentally analyzed and investigated. Both the electric and magnetic fields can manipulate the molecular arrangement of LC to array a certain angle without changing the refractive index of the LC. Therefore, light loss in the PCF varies with the electric and magnetic fields whereas the peak wavelengths remain constant. The experimental results show that the transmission intensity decreases with the increase of the electric and magnetic fields. The cut-off electric field is 0.899 V/um at 20 Hz and the cut-off magnetic field is 195 m T. This simple and compacted optical modulator will have a great prospect in sensing applications.

Machine learning technique for prediction of magnetocaloric effect in La(Fe,Si/Al)_(13)-based materials

Data-mining techniques using machine learning are powerful and efficient for materials design, possessing great potential for discovering new materials with good characteristics. Here, this technique has been used on composition design for La（Fe,Si/Al）（13）-based materials, which are regarded as one of the most promising magnetic refrigerants in practice. Three prediction models are built by using a machine learning algorithm called gradient boosting regression tree（GBRT） to essentially find the correlation between the Curie temperature（TC）, maximum value of magnetic entropy change（（？SM）（max））,and chemical composition, all of which yield high accuracy in the prediction of TC and（？SM）（max）. The performance metric coefficient scores of determination（R^2） for the three models are 0.96, 0.87, and 0.91. These results suggest that all of the models are well-developed predictive models on the challenging issue of generalization ability for untrained data, which can not only provide us with suggestions for real experiments but also help us gain physical insights to find proper composition for further magnetic refrigeration applications.

Magnetic entropy change involving martensitic transition in NiMn-based Heusler alloys

Our recent progress on magnetic entropy change（S） involving martensitic transition in both conventional and metamagnetic NiMn-based Heusler alloys is reviewed.For the conventional alloys,where both martensite and austenite exhibit ferromagnetic（FM） behavior but show different magnetic anisotropies,a positive S as large as 4.1 J·kg^-1·K^-1 under a field change of 0-0.9 T was first observed at martensitic transition temperature T M～197 K.Through adjusting the Ni：Mn：Ga ratio to affect valence electron concentration e/a,T M was successfully tuned to room temperature,and a large negative S was observed in a single crystal.The △S attained 18.0 J·kg^-1·K^-1 under a field change of 0-5 T.We also focused on the metamagnetic alloys that show mechanisms different from the conventional ones.It was found that post-annealing in suitable conditions or introducing interstitial H atoms can shift the T M across a wide temperature range while retaining the strong metamagnetic behavior,and hence,retaining large magnetocaloric effect（MCE） and magnetoresistance（MR）.The melt-spun technique can disorder atoms and make the ribbons display a B2 structure,but the metamagnetic behavior,as well as the MCE,becomes weak due to the enhanced saturated magnetization of martensites.We also studied the effect of Fe/Co co-doping in Ni 45（Co1-xFex）5 Mn36.6In13.4 metamagnetic alloys.Introduction of Fe atoms can assist the conversion of the Mn-Mn coupling from antiferromagnetic to ferromagnetic,thus maintaining the strong metamagnetic behavior and large MCE and MR.Furthermore,a small thermal hysteresis but significant magnetic hysteresis was observed around TM in Ni51Mn49-xInx metamagnetic systems,which must be related to different nucleation mechanisms of structural transition under different external perturbations.

Magnetic Field Measurement with Heisenberg Limit Based on Solid Spin NOON State

The maximum entangled number state （NOON state） can improve the sensitivity of physical quantity measure- ment to the Heisenberg limit 1/N. In this work, the magnetic field measurement based on the individual solid spin NOON state is investigated. Based on the tunable effective coupling coefficient, we propose a generation scheme of the three-spin NOON state, i.e, the Creenberger-Horne-Zeilinger （CHZ） state, and discussed the mea- surement resolution reduction due to decoherence. It is unnecessary to entangle spins as many as possible when decoherence exists. In practice, defect spins in diamond and alp donors with long coherence time can be applied with current techniques in the nano-scaled high resolution magnetic measurement.