Study of sedimentary sequence cycles by well-seismic calibration

In order to solve the problems of the fine division of sedimentary sequence cycles and their change in two-dimensional space as well as lateral extension contrast, we developed a method of wavelet depth-frequency analysis. The single signal and composite signal of different Milankovitch cycles are obtained by numerical simulation. The simulated composite signal can be separated into single signals of a single frequency cycle. We also develop a well-seismic calibration insertion technology which helps to realize the calibration from the spectrum characteristics of a single well to the seismic profile. And then we determine the change and distribution characteristics of spectrum cycles in the two-dimensional space. It points out the direction in determining the variations of the regional sedimentary sequence cycles, underground strata structure and the contact relationship.

Cambrian Sequence Stratigraphy and Sea Level Cycles of North China Platform

The Cambrian of the North China platform consists chiefly of shallow water deposits and shows the sedimentary characters of an epicontinental sea basin. Controlled mainly by global sea level changes and sedimentary influx, the depositional sequences all exhibit as composite sequences. From bottom upward, 14 sequences (3rd order) are recognized, which may be grouped into 5 sequence sets and further into 2 mesosequences (2nd order). It is suggested herein that the Cambrian/Ordovician boundary may better be set at the MFS (maximum flooding surface) of the sequence OSq1, above which the conodont Cordylodus lindstroemi occurs. This position is about 40 m above the traditional Cambrian/Ordovician boundary and is within the Yeli Formation.

Devonian Sequence Stratigraphy and Sea Level Change Cycles in South China

The Devonian is well developed in South China and has drawn a great attention from the geologists both at domestic and abroad. On the basis of study on the sequence stratigraphy in more than 10 sections in Guizhou, Guangxi, Longmenshan and Southern Qinling within South China we have identified 21 sequences and T-R cycles that correspond to third-order sea level changes. These sea level change cycles were controlled by autorhythm(Pragian,Eifelian), allorhythm(Lochkovian,Emsian,Givetian) and coupling rhythm mechanisms (frasian, Famennian and F-F boundary).

Autocorrelation of Sequences Generated by Single Cycle T-Functions

Cryptographic properties of the single cycle T-function's output sequences are investigated.Bounds of autocorrelation functions of the kth coordinate sequence and bounds of state output sequence are calculated respectively.The Maximum Sidelobe Ratio(MSR) of the kth coordinate sequence and the MSR of state output sequence are given respectively.The bounds of autocorrelation functions show that the values of autocorrelation functions are large when shifts are small.Comparisons of the autocorrelations between the state output sequence and coordinate output sequence are illustrated.The autocorrelation properties demonstrate that T-functions have cryptographic weaknesses and the illustration result shows coordinate output sequences have better autocorrelation than that of state output sequences.

Paleogene Sequence Stratigraphy and Sea Level Change Cycles in South Xizang (Tibet) - Last Stage in Eastern Neo-Tethyan Evolution

The marine Paleogene at Gangba, south Tibet is characterized by shallow water deposits and in vertical succession shows a clear facies change from fluvial plain through carbonate platform to retro-platform mud flat. From the bottom of Danian to Upper Priabonian, nine 3rd -order depositional sequences are recognized, which in turn make up four supersequences and constitute two clear transgression-regression cycles. These requences were developed in a tectonic setting of strong compression resulted from the collision between the Indian and Eurasian plates. Between the Paleocene and Eocene, there exists an important hiatus that has consumed at least 5.5 Ma of deposition. This unconformity is thought to be created by the basement uplift coupled with eustatic fall and marks the basin transformation from epicontinental sea to remnant hay. The rapid basement subsidence and relative sea level rise in Late Eocene are thought to be caused by the loading flexure of the Eurasian continent onto the Indian plate, which resulted in the southward migration of depocenter in the epoch.

Bifurcations and Sequences of Elements in Non-Smooth Systems Cycles

This article describes the implementation of a novel method for detection and continuation of bifurcations in non-smooth complex dynamic systems. The method is an alternative to existing ones for the follow-up of associated phenomena, precisely in the circumstances in which the traditional ones have limitations (simultaneous impact, Filippov and first derivative discontinuities and multiple discontinuous boundaries). The topology of cycles in non-smooth systems is determined by a group of ordered segments and points of different regions and their boundaries. In this article, we compare the limit cycles of non-smooth systems against the sequences of elements, in order to find patterns. To achieve this goal, a method was used, which characterizes and records the elements comprising the cycles in the order that they appear during the integration process. The characterization discriminates: a) types of points and segments;b) direction of sliding segments;and c) regions or discontinuity boundaries to which each element belongs. When a change takes place in the value of a parameter of a system, our comparison method is an alternative to determine topological changes and hence bifurcations and associated phenomena. This comparison has been tested in systems with discontinuities of three types: 1) impact;2) Filippov and 3) first derivative discontinuities. By coding well-known cycles as sequences of elements, an initial comparison database was built. Our comparison method offers a convenient approach for large systems with more than two regions and more than two sliding segments.

Base-Level Cycles and Episodic Coal Accumulation——Case Study of Dongsheng Coalfield in Ordos Basin

The advantage of high-resolution sequence stratigraphy, which takes base-levels as reference, is that it can be applied to continental depositional basins controlled by multiple factors and can effectively improve the accuracy and resolution of sequential stratigraphic analysis. Moreover, the principles of base-level cycles are also suitable for analyzing sequential stratigraphy in continental coal-bearing basins because of their accuracy in forecasting distribution of coal measures. By taking the Dongsheng coalfield in the Ordos basin as an example, the extensive application of base-level cycles in exploration and exploitation of coal is analyzed. The result shows that the Yan’an formation in the Dongsheng area is a long-term base-level cycle which is bordered by nonconformities and made up of five mid-term cycles and 13 short-term cycles. The long-term cycle and the mid-term cycles are obvious in comparison with a transverse profile. The episodic coal accumulation in the Mesozoic Ordos basin means that the deposition of primary matter (peat bogs) of coalification is discontinuous, periodical and cyclical in the evolution of the basin. The episodic accumulation of coal measures in the Yan’an stage is controlled by ascending-descending changes of a long-term cycle and middle-term cycles. Coal measures formed during the early and late periods of the long-term cycle are characterized by multiple layers, big cumulative thickness and poor continuity. Coal measures formed in the mid-term of the long cycle are dominated by good continuity, fewer layers and a small additive thickness, which is favorable for the accumulation of thick and continuous coal measures in the transition stage of mid term base-level cycles.

Leachate Lithium Characteristics of Loess-paleosol Sequences on the Chinese Loess Plateau and their Paleoclimatic Significance

The geochemical components of the leachate from loess-paleosol deposits can provide information about climaterelated post-depositional processes.For example,leachate lithium([Li]_(leachate))is a potential paleoclimate proxy because lithium is a typical lithophile element that is readily adsorbed by clay minerals during weathering and pedogenesis,and thus stratigraphic variations in[Li]leachatecan reflect these processes.We investigated the[Li]leachatevalues of two loess-paleosols profiles(the Luochuan and Weinan sections),on a north-south climatic gradient on the Chinese Loess Plateau.Independent paleoclimate information was provided by measurements of magnetic susceptibility,grain size,Rb/Sr ratios,and clay mineral content.During the last glacial-interglacial period,[Li]leachateincreased from 0.39 to 1.97μg/g at Luochuan and from 0.67 to 2.45μg/g at Weinan,mainly due to increasing pedogenesis.Based on these results we developed a conceptual model to explain the variations in[Li]leachate,Li^(+)within loess layers is mainly derived from dust input and the decomposition of primary minerals,influenced by the East Asian winter monsoon,while in paleosol layers Li is mainly derived from clay mineral adsorption during pedogenic processes,influenced by the East Asian summer monsoon.

Cyclic Characteristics of the Physical Properties of Key Strata in CBM Systems Controlled by Sequence Stratigraphy—An Example from the Gujiao Block

Multiple coal seams and interbedded rock assemblages formed in vertical progression due to the influence of multiple stages of sea level transgressions.Based on mercury injection experiment,low temperature liquid nitrogen experiment,porosity and permeability experiment and breakthrough pressure experiment,the vertical variation characteristics of coal-bearing strata in Gujiao block are explained in detail.The results of the mercury injection and low temperature liquid nitrogen experiments show that the pore structure characteristics fluctuate with increasing depth in the strata,with fewer micropores followed by transition pores.The BET specific surface area and average pore diameter of the Shanxi Formation are generally larger than those of the Taiyuan Formation.Due to the continuous cyclic sequence stratigraphy changes,the porosity,permeability,breakthrough pressure and breakthrough time of the samples show a certain cyclicity.Within the same sequence,the porosity is larger,and the permeability is smaller near the maximum flooding surface.Although the permeability of the sandstone samples is higher,the porosity is lower,and the breakthrough pressure and breakthrough times are greater.The strata in the study area formed in an oxidized environment that was affected by freshwater,and the pore structure of different lithologies is quite different.After the formation of sandstone,the intergranular pores generally underwent filling with secondary quartz,clay minerals and organic matter,resulting in low porosity and permeability.

Base-level Chang and Sequence Stratigraphy of Lishu Fault Lacustrine Basin

Base-level is a kind of surface which controls sedimentation and erosion. So, it can be concluded that it is base-level change that controls the formation and internal structure of a sequence. A single cycle of base-level change can generate four sets of different stacking patterns. They are two sets of aggradation, one progradation and one retrogradation, which affects the features of the internal structure of a sequence. Lishu fault subsidence of Songliao basin is a typical half-graben lacustrine basin. Comprehensive base-level change analysis indicates that six base-level cycles and their related six sequences can be recognized between T 4 and T 5 seismic reflection surface. The contemporaneous fault is the main controlling factor of the fault lacustrine basin. There are obvious differences exist in the composition of sedimentary systems and all systems tracts between its steep slope (the side that basin control fault existed) and flat slope. Except highstand systems tract is composed of fan delta-lacustrine system, lowstand systems tract, transgressive systems tract and regressive systems tract are all made up of fan delta-underwater fan-lacustrine sedimentary systems in the side of steep slope.

Correlation methods of base-level cycle based on wavelet neural network

The authors discussed the method of wavelet neural network （WNN） for correlation of base-level cycle. A new vectored method of well log data was proposed. Through the training with the known data set, the WNN can remenber the cycle pattern characteristic of the well log curves. By the trained WNN to identify the cycle pattern in the vectored log data, the ocrrdation process among the well cycles was completed. The application indicates that it is highly efficient and reliable in base-level cycle correlation.

A Scheme of the Hierarchy for Sequence Stratigraphy

Depositional sequences may be distinguished into six ranks of units as giga-, mega-, meso-, ortho-, sub- and micro-sequence, and are interpreted to be formed during the eustatic cycles with time-intervals of 500-6000 Ma, 60-120 Ma, 30-40 Ma, 2-5 Ma, 0.1-0.4 Ma and 0.02-0.04 Ma respectively. All of them are thought to be essentially related to cosmological cycles, except the megasequence which may be caused by the long-term geothermal cycles on cratons. We deem that the depositional sequences, though often influenced variably by local tectonics and other factors, are primarily global and periodic in nature. We also hold that as one of the planets within the Galaxy, the earth must have been affected in various ways by other asteroids, and that the depositional sequences are merely the responses of the hydrosphere to the cosmological cycles in sedimentation.

Sequence Stratigraphy of the Permian--Triassia Boundary Section of Changxing, Zhejiang, Southern China

Three third-order sequences and about one hundred high-frequency cycles or Milankovitchcycles within the Late Permian Changxingian to Early Triassic Griesbachian are identified in theMeishan Section of Changxing, Zhejiang Province, southern China, the candidate stratotype sec-tion of the global Permo-Triassic boundary, based on a detailed study of the biological,ecological and high-resolution allochthonous cyclic events, microfacies and depositional systems.Furthermore, the stacking pattern of the depositional systems across various Changxingian andGriesbachian sedimentary facies of the Lower Yangtze and the sequence stratigraphic frameworkare outlined with the Meishan section as the principal section. In this paper the habitat types offossil biota are applied to semiquantitative palaeobathymetry and the study of relative sea levelchanges.

On the analysis of the high-resolution sequence stratigraphy and coal accumulating law of jurassic in Ordos Basin

The strata of Jurassic was divided into three tectonic sequences and eight se- quences of third rank,according to the developing feature of the tectonic inconformity and the transforming feature of the depositional system tracts.Also the identification and the division of the base-level cycle of different period were carried through.Therefore three cycles of super period,eight cycles of long period,twenty-four cycles of middle period and some cycles of short period were identified.From the overall character of the coal-accu- mulation in the Mesozoic,we can see that the Yan'an formation is of the best nature of coal bearing.When the coal bearing systems of Jurassic were depositing,the Ordos area is the coal accumulating basin of terrene of large scale and located in the same tectonic unit.But the local structure of different part and the paleolandform are different in the basin which resulted in the difference of the depositional environment.So the layer number and the distribution of the thickness of the coal beds are different in the different part of the ba- sin.The coal-accumulating action migrated regularly along with the development,evolve- ment and migration of the depositional systems.The layer numbers of the coal beds, which can be mined,are more in the north and west fringe of the basin,whose distributing area is extensive,and they are more steady in the landscape orientation,also the total thickness is great.Therefore the nature of coal bearing and the coal-accumulating action of different part changed obviously in the space in Ordos area.

Triassic Sequence Stratigraphy and Sea-Level Changes in Qomolongma Area, Southern Tibet, China: From Epicontinental Sea to Rift Basin

The Triassic in the Qomolongma area, southern Tibet, was deposited under an extensional tectonic setting from the Pangea supercontinent to continental rifting. From the Induan to Rhaetian, 12 depositional sequences (3rd order) have been recognized, which can be grouped into 5 sequence sets and in turn make up a well defined mesosequence (2nd order). Among the recognized marine transgressions, those at 250 Ma, 239 Ma, 231 Ma and 223 Ma respectively are particularly of significance and can be correlated widely across continents. The study shows that in Triassic the Qomolongma area experienced a sedimentary evolution from epicontinental sea to rift basin with the turning point at ca 228 Ma. During the early and middle epochs, the area was under epeiric sea, with carbonate ramp to mixed shoal environments predominant. In the late Carnian, the strong extension initiated listric faulting, thus resulting in rapid basement subsidence and the onset of a rift basin. From the late Norian to Rhaetian, it manifested as a rapid basin filling process in the area. Coupled with long term sea level fall, the excessive terrigenous influx led to the shift of environment from deep water prodelta to shore and finally to fluvial plain.

HIGH-RESOLUTION SEQUENCE STRATIGRAPHIC ANALYSIS OF THE PERMIAN IN THE WESTERN SHANDONG AND HUAINAN-HUAIBEI COALFIELDS

The sedimentary characteristics and their combination succession of the Permian in the Shandong nd Huainan-Huaibei coalfields are analyzed. The mid-and short-term stratigraphic base-level cycles are identified. High-resolution sequences are divided based on the above results. The study shows that the stratigraphic base-level cyclic method is an efficient way in the determination of the high-resolution sequences, especially in the classification of tbe terrestrial and transitional depositional succession.

Sequential fault diagnosis strategy with imperfect tests considering life cycle cost

The problem of sequential fault diagnosis is to construct a diagnosis tree that can isolate the failure sources with minimal test cost. Pervious sequential fault diagnosis strategy generating algorithms only consider the execution cost at application stage, which may result in a solution with poor quality from the view of life cycle cost. Furthermore, due to the fact that uncertain information exists extensively in the real-world systems, the tests are always imperfect. In order to reduce the cost of fault diagnosis in the realistic systems, the sequential fault diagnosis problem with imperfect tests considering life cycle cost is presented and formulated in this work, which is an intractable NP-hard AND/OR decision tree construction problem. An algorithm based on AND/OR graph search is proposed to solve this problem. Heuristic search based on information theory is applied to generate the sub-tree in the algorithm. Some practical issues such as the method to improve the computational efficiency and the diagnosis strategy with multi-outcome tests are discussed. The algorithm is tested and compared with previous algorithms on the simulated systems with different scales and uncertainty. Application on a wheel momentum system of a spacecraft is studied in detail. Both the simulation and application results suggest that the cost of the diagnosis strategy can be reduced significantly by using the proposed algorithm, especially when the placement cost of the tests constitutes a large part of the total cost.

Type division and controlling factor analysis of 3rd-order sequences in marine carbonate rocks

Type division and controlling factor analysis of 3rd-order sequence are of practical significance to tec-tonic analysis, sedimentary environment identification, and other geological researches. Based on the comprehensive analysis of carbon and oxygen isotope trends, paleobathymetry and spectral-frequency of representative well logs, 3rd-order sequences can be divided into 3 types： （a） global sea level （GSL） sequence mainly controlled by GSL change;（b） tectonic sequence mainly controlled by regional tectonic activity;and （c） composite sequence jointly controlled by GSL change and regional tectonic activity. This study aims to identify the controlling factors of 3rd-order sequences and to illustrate a new method for classification of 3rd-order sequences of the middle Permian strata in the Sichuan Basin, China. The middle Permian strata in the Sichuan Basin consist of 3 basin-contrastive 3rd-order sequences, i.e., PSQ1, PSQ2 and PSQ3. Of these, PSQ1 is a GSL sequence while PSQ2 and PSQ3 are composite sequences. The results suggest that the depositional environment was stable during the deposition of PSQ1, but was activated by tectonic activity during the deposition of the middle Permian Maokou Formation.

Seismic Sequence Structure and Earthquakes Triggering Patterns

Within a time distribution of magnitude values, before any mainshock some earthquake triggering patterns with several features develop, under tectonic processes’ influence, through which it is possible to early identify the preparation phase of big earthquakes. The purpose of this article was to identify and classify the warning patterns that develop before a big earthquake by considering space-time seismicity variations. The methodological approach adopted was of graphical type, based on procedures of technical analysis currently used to estimate the financial markets. In the initial phase of the study we have analyzed the seismic sequences types described in the bibliography (type 1: foreshocks-mainshock-aftershocks, type 2: mainshock-aftershock;type 3: swarm) and the main structure of the seismic cycle, within which maximum and minimum magnitude values characterize the pattern that it develops until the main event changes. Then, we assessed the position of foreshocks, mainshock and aftershocks within the seismic cycle in order to identify the warning pattern that characterized the exact time when the energy emission occurs. As to the evolution normally shown over time, we have grouped the warning patterns in 2 categories: 1) progressive earthquake pattern;2) flash earthquake pattern. Finally, we have made a classification of the warning pattern related to the fluctuations of maximum and minimum magnitude values, compared its form with the mainshock’s focal mechanism and suggested some graphic procedures in order to estimate the mainshock magnitude value associated with each warning pattern. The results we obtained unquestionably allow a better comprehension of preparation process of a large earthquake, improving the earthquakes forecasting probability in the next future.

A FAST ALGORITHM FOR THE GENERATION OF k-ARY DE BRUIJN SEQUENCES

De Bruijn sequences are highly important nonlinear shift register sequences. This paper presents a new algorithm for the generation of fc-ary de Bruijn sequences by juxtaposing the periodic reductions of the cycles. Its each step produces a string of elements instead of one element. Hence the algorithm reduces the time of operation, and accelerates the speed of generation.