Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

Research on batch multielement rapid quantitative analysis based on the standard curve-assisted calibration-free laserinduced breakdown spectroscopy method

This study proposes a batch rapid quantitative analysis method for multiple elements by combining the advantages of standard curve(SC)and calibration-free laser-induced breakdown spectroscopy(CF-LIBS)technology to achieve synchronous,rapid,and accurate measurement of elements in a large number of samples,namely,SC-assisted CF-LIBS.Al alloy standard samples,divided into calibration and test samples,were applied to validate the proposed method.SC was built based on the characteristic line of Pb and Cr in the calibration sample,and the contents of Pb and Cr in the test sample were calculated with relative errors of 6%and 4%,respectively.SC built using Cr with multiple characteristic lines yielded better calculation results.The relative contents of ten elements in the test sample were calculated using CF-LIBS.Subsequently,the SC-assisted CF-LIBS was executed,with the majority of the calculation relative errors falling within the range of 2%-5%.Finally,the Al and Na contents of the Al alloy were predicted.The results demonstrate that it effectively enables the rapid and accurate quantitative analysis of multiple elements after a single-element SC analysis of the tested samples.Furthermore,this quantitative analysis method was successfully applied to soil and Astragalus samples,realizing an accurate calculation of the contents of multiple elements.Thus,it is important to advance the LIBS quantitative analysis and its related applications.

Constructing a standard system of city sustainable development assessment technology based on the SDGs

Given the rapid development of China’s new urbanization,cities with different locations and varying functional positioning,resource endowments,and development stages have insufficient scientific and applicable technical tools for implementing the United Nations Sustainable Development Goals(SDGs).City managers and policymakers must urgently establish SDG benchmarks to diagnose city development.Moreover,successful experiences from similar cities regarding sustainable development and self-improvement must be learned from to promote diversified,sustainable development across the country.Furthermore,emerging technologies such as artificial intelligence,the Internet of Things,big data and 5G are widely used in smart cities.Therefore,there is a growing need for“knowledge-based,personalized and intelligent”technologies to support monitoring,evaluation,and decision-making processes facilitating sustainable development in cities.This paper uses standardization as the theoretical support and technical basis.This approach can help clarify the sustainable development processes in China and clarify the evaluation results of and provide data on horizontal city comparisons,which can be used to develop evaluation technology for sustainable development in cities and construct a standardized system.The results provide a standard framework for intelligent assessment and decision-making regarding cities’sustainable development capabilities in China.Evaluating major international standardization institutions reveals that the practices of Chinese national standards should be fully absorbed and integrated to guide the evaluation of smart,resilient,and low-carbon cities.To this end,an indicator library of city sustainable development is proposed to provide standard evaluation technology methods.Finally,analyzing the response relationship of the indicator library to SDGs reveals the need for a standardized knowledge map of sustainable development assessment techniques and methods from the perspective of integrated management for sustainable development in cities.

Field Load Test Based SHM System Safety Standard Determination for Rigid Frame Bridge

The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.

Quality Standard of Tibetan Medicine Nardostachys jatamansi Herba Based on"An Integrated Plant but Multi-purpose"

[Objectives]To establish the quality standard of Nardostachys jatamansi Herba.[Methods]The characters and microscopical identification of N.jatamansi Herba were carried out.The contents of moisture,total ash,acid-insoluble ash and extract were determined according to the relevant methods of the Chinese Pharmacopoeia(2020 edition).Using chlorogenic acid and 3,5-O-dicaffeoylquinic acid as quality control indexes,TLC and HPLC methods were established for qualitative and quantitative determination,and HPLC fingerprints were established.[Results]The characteristics of character identification,microscopic identification and thin layer identification were obvious.The moisture content ranged from 2.7%to 7.8%,with an average value of 5.4%.The total ash content ranged from 6.7%to 16.2%,with an average of 11.0%.The acid-insoluble ash content ranged from 0.7%to 8.5%,with an average of 3.6%.Extractives content ranged from 20.9%to 34.4%,with an average of 29.7%.Chlorogenic acid content was between 0.45%and 1.30%,with an average value of 0.77%.The content of 3,5-O-dicaffeoylquinic acid ranged from 0.18%to 0.58%,with an average of 0.31%.The similarity of each batch was between 0.930 and 0.994,indicating that the quality of medicinal materials from different producing areas was stable.[Conclusions]The quality standard of N.jatamansi Herba was established,which could provide quality control basis for rational,comprehensive and efficient utilization of N.jatamansi DC.resources and clinical use.

Characteristics of Dry and Wet Climate in Shandong Province Based on Standardized Precipitation Index

Based on the monthly precipitation data of 116 meteorological stations in Shandong Province during 1970-2021,standardized precipitation index(SPI)was calculated,and the methods of linear fitting,mutation test and Morlet wavelet analysis were used to analyze the change trend and temporal and spatial distribution characteristics of SPI index in the past 52 years.The results show that there were more normal years in Shandong Province,and the frequency reached 38.46%.There was severe drought in the 1980s and more wet years after 2003.SPI index showed an upward trend in spring,summer and winter but a weak arid trend in autumn.In addition,intense dry weather was more frequent in summer.Spatially,the climate was normal or humid in most areas of Shandong Province.The regions with more wet years were located in the central and northeast Shandong and the peninsula,while the climate was normal in the southwest and north of Shandong.The areas with more dry years were mainly located in the northwest of Shandong Province.There was mainly local and global drought in Shandong Province,and the arid area showed a decreasing trend.In the past 52 years,Shandong Province experienced quasi-4 times of alternation between dry and wet climate.The long period of 21 a was the first main period,and the climate would be still wet in Shandong Province in the future.In terms of mutation,the climate in Shandong Province became humid after 2003,and 2003 was the mutation point.After the abrupt change,the climate changed from gradually drying to wetting.

Calculation of the Standard Model Parameters and Particles Based on a SU(4) Preon Model

This paper describes an extension and a new foundation of the Standard Model of particle physics based on a SU(4)-force called hyper-color, and on preon subparticles. The hyper-color force is a generalization of the SU(2)-based weak interaction and the SU(1)-based right-chiral self-interaction, in which the W-and the Z-bosons are Yukawa residual-field-carriers of the hyper-color force, in the same sense as the pions are the residual-field-carriers of the color SU(3) interaction. Using the method of numerical minimization of the SU(4)-action based on this model, the masses and the inner structure of leptons, quarks and weak bosons are calculated: the mass results are very close to the experimental values. We calculate also precisely the value of the Cabibbo angle, so the mixing matrices of the Standard model, CKM matrix for quarks and PMNS matrix for neutrinos can also be calculated. In total, we reduce the 29 parameters of the Standard Model to a total of 7 parameters.

A High Efficiency Hardware Implementation of S-Boxes Based on Composite Field for Advanced Encryption Standard

The SubBytes (S-box) transformation is the most crucial operation in the AES algorithm, significantly impacting the implementation performance of AES chips. To design a high-performance S-box, a segmented optimization implementation of the S-box is proposed based on the composite field inverse operation in this paper. This proposed S-box implementation is modeled using Verilog language and synthesized using Design Complier software under the premise of ensuring the correctness of the simulation result. The synthesis results show that, compared to several current S-box implementation schemes, the proposed implementation of the S-box significantly reduces the area overhead and critical path delay, then gets higher hardware efficiency. This provides strong support for realizing efficient and compact S-box ASIC designs.

Research on the Index System of Old Neighborhood Renovation Based on Green Building Evaluation Standard

With the advancement of the transformation,the contradiction between the residents’demand for a better living environment and the convenience of living in the settlements comes to the fore.Effective identification,organic integration,timely adoption,and correct decision-making for the transformation of old neighborhoods are pressing issues in the transformation of old neighborhoods.Therefore,this paper takes the green building evaluation standards of various countries as the research basis and support for the construction of the transformation strategy of old neighborhoods.Through the collection and comparative analysis of the indicators of green building evaluation standards,the index system of transformation is formed,and it also provides a certain foundation for the subsequent related research.

The effect of high-fidelity simulation in medical nursing based on the healthcare simulation standards of best practice

Background:High-fidelity simulation has been demonstrated to make great progress in learning.However,there is still ongoing exploration on how to fully harness the advantages of this teaching method and enhance its effectiveness.This study conducted high-fidelity simulation in medical nursing based on the Healthcare Simulation Standards of Best Practice and evaluated its effect.Methods:The study was conducted from September 2019 to June 2020.A total of 82 undergraduate nursing students from a university in Shanghai participated in the high-fidelity simulation in medical nursing.The simulation design scale,educational practices in simulation scale,and students’satisfaction and self-confidence were used to evaluate the effect.Results:The mean score of simulation design scale was 4.06±0.63 with the mean scores of all dimensions being over 3.0.The mean score of educational practices in simulation scale was 4.14±0.56 with the mean scores of all dimensions being over 4.0.The mean scores of students’satisfaction and self-confidence were 4.07±0.72 and 3.89±0.58,respectively.Conclusion:Students reported high levels of simulation design and educational practices in simulation.They were also satisfied with learning and reported high levels of self-confidence.Some key points need to be considered so that the learning effects might be optimized.

Evaluation Model of Carrying Capacity of Water Resources Based on Standardized Indices of Radial Basis Function

[Objective] The aim was to study on RBF model about evaluation on carrying capacity of water resources based on standardized indices. [Method] The indices were transformed and the averages of standard values in different levels were taken as the standardized values of components of central vectors for basic functions of RBF hidden nodes. Hence, the basic functions are suitable for most indices, simplifying expression and calculation of basic functions. [Result] RBF models concluded through Monkey-king Genetic Algorithm with weights optimization are used in evaluation on water carrying capacity in three districts in Changwu County in Shaanxi Province, which were in consistent with that through fuzzy evaluation. [Conclusion] RBF, simple and practical, is universal and popular.

Comparative analysis of CPUE standardization of Chinese Pacific saury(Cololabis saira) fishery based on GLM and GAM

Pacific saury is an important high-seas fishery resource in the Northwest Pacific Ocean for the Chinese Mainland.Reliable and accurate catch per unit effort(CPUE)plays a significant rule in Pacific saury stock assessment.Many statistical models have been used in the previous CPUE standardization research.Here,we compare the performance of Generalized Linear Models(GLMs)and Generalized Additive Models(GAMs)using CPUE data collected from Chinese saury fishery in the Northwest Pacific Ocean from 2003 to 2017(excluding data from Chinese Taipei),and evaluate the influence of spatial,temporal,environmental variables and vessel length on CPUE.Optimal GLM/GAM models were selected using the Bayesian information criterion(BIC).Explained deviance and 5-fold bootstrap cross-validation results were used to compare the performance of the two model types.Fitted GLMs accounted for 21.57%of the total model-explained deviance,while GAMs accounted for 38.95%.Predictive performance metrics and 5-fold cross-validation results showed that the best GAM performed better than the best GLM.Therefore,we recommend GAM as the preferred model for standardizing CPUE of Pacific saury in the Northwest Pacific Ocean.

Quality control of Semen Ziziphi Spinosae standard decoction based on determination of multi-components using TOF-MS/MS and UPLC-PDA technology

A sensitive,fast and comprehensive method for the quality assessment of Semen Ziziphi Spinosae(SZS)standard decoction with characterization of its chemical components was developed and validated.UPLC-Q/TOF-MS/MS system was used to identify thirty-six chemical components of SZS standard decoction which included nucleosides,phenolic acids,alkaloids,and flavonoids.Furthermore,a UPLC-PDA method was validated to simultaneously determine adenosine,protocatechuic acid,magnoflorine,catechin,protocatechin,vicenin II,spinosin,kaempferol-3-rutinoside,and 6'''-feruloylspinosin which represent four species of characteristic compounds.The qualitative method had been validated according to Chinese Pharmacopoeia(2015 edition)in terms of lineary,repeatability,recovery and stability for all analytes,with the results showing good precision,accuracy and stability.In conclusion,the method using UPLC combined with MS and PDA provided a novel way for the standardization and identification of SZS standard decoction,and also offered a basis for qualitative analysis and quality assessment of the preparations for SZS standard decoction.

Multi-mode process monitoring based on a novel weighted local standardization strategy and support vector data description

There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because their presumptions are that sampled-data should obey the single Gaussian distribution or non-Gaussian distribution. In order to solve these problems, a novel weighted local standardization(WLS) strategy is proposed to standardize the multimodal data, which can eliminate the multi-mode characteristics of the collected data, and normalize them into unimodal data distribution. After detailed analysis of the raised data preprocessing strategy, a new algorithm using WLS strategy with support vector data description(SVDD) is put forward to apply for multi-mode monitoring process. Unlike the strategy of building multiple local models, the developed method only contains a model without the prior knowledge of multi-mode process. To demonstrate the proposed method's validity, it is applied to a numerical example and a Tennessee Eastman(TE) process. Finally, the simulation results show that the WLS strategy is very effective to standardize multimodal data, and the WLS-SVDD monitoring method has great advantages over the traditional SVDD and PCA combined with a local standardization strategy(LNS-PCA) in multi-mode process monitoring.

Attribute-Based Re-Encryption Scheme in the Standard Model

In this paper, we propose a new attribute-based proxy re-encryption scheme, where a semi-trusted proxy, with some additional information, can transform a ciphertext under a set of attributes into a new ciphertext under another set of attributes on the same message, but not vice versa, furthermore, its security was proved in the standard model based on decisional bilinear Diffie-Hellman assumption. This scheme can be used to realize fine-grained selectively sharing of encrypted data, but the general proxy rencryption scheme severely can not do it, so the proposed schemecan be thought as an improvement of general traditional proxy re-encryption scheme.

Update of Meat Standards Australia and the cuts based grading scheme for beef and sheepmeat

Changing markets and evolving consumer demand present new challenges for the beef and sheep industries. In response, the industry has been investing in innovations to deliver new products and management systems to consumers. One such innovation is the Meat Standards Australia（MSA） system. This system is a Total Quality Management System, aimed at delivering an eating quality guarantee to consumers, and through this adding value to the entire supply chain. At present, it is well developed for beef and still evolving for sheepmeat. MSA has identified Critical Control Points（CCPs） in the production, pre-slaughter, processing and value-adding aspects of the supply chain that impact on consumer palatability through the large-scale taste testing of meat by untrained consumers. These CCPs are used as either（1） mandatory criteria determining eligibility for grading, and（2） inputs in a model predicting the palatability of individual combinations of muscle and different cooking methods. Through the prediction of palatability, MSA increases consumer satisfaction and is used to provide assurance for branded products and new marketing innovations in Australia and internationally. This has added significant value to the Australian beef industry, with several retail examples demonstrating consumer willingness to pay more for premium quality beef and sheepmeat products based on the MSA grading scores. This price differential at retail allows the value of the carcass to be calculated based on the eating quality as well as the volume produced, thereby delivering a financial reward for farmers producing high quality carcasses. The continuous quality scale of MSA allows producers to realise the financial gain of incremental improvements in quality, as well as the precise economic weights associated with traits such as marbling, ossification score, or breed. The use of MSA in this fashion has underpinned a new and innovative supply chain where the pricing is transparent and allows producers to make informed decisions to modify both quality and yield traits. To date, the MSA system for beef has proved to be effective in predicting beef palatability not only in Australia but also in many other countries（France, Poland, Ireland, Northern Ireland, Japan, South Korea, New-Zealand, the USA and South Africa）. In Europe, results of the Pro Safe Beef and Pro Opti Beef projects as well as other national projects demonstrate the potential to develop an MSA-like international grading system for the supply chain in the EU, despite thediverse cultures and complex beef production systems within the member states. International testing in lamb has only just begun and preliminary results are discussed here.

New Insights into the Depositional Environments of Ordovician Carbonate Formations in the Yubei Area of Tarim Basin Based on Standard Microfacies Types

Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin, China, with an exploration history of several years. Recent exploration has preliminarily indicated that the Ordovician carbonate formations in this area have some oil and gas potential. Carbonate microfacies provides material basis for reservoir development, seal formation and hydrocarbon generation. Therefore, this work utilized the standard microfacies （SMF） types to study the microfacies of the Ordovician formations in the Yubei area in order to provide theoretical basis for the next exploration.

Pollutant emission reduction effect through effluent tax,concentration-based effluent standard,or both

There are numerous studies comparing different kinds of environmental taxes and standards.However,forms of environmental standards focused by former researchers are usually quantitybased limits/standards(e.g.pounds per day or pounds per unit of output).Concentration-based emission standard(e.g.milligrams per liter of wastewater) as one important form of environmental standard has not been given much attention.In this article,comparable estimates of their probable effect on enterprise pollution reduction will be developed for concentrationbased effluent standards,effluent taxes,and a combination of both.A linear simulation model is used to clearly and obviously compare the effects of effluent taxes and concentration-based standards within the same figure.With one detailed application to the paper industry,some enlightenment and conclusions-as well as the general applicability of these principles-are then provided:Under the same effluent tax rate,enterprises,groups,and industries that are cleaner will reduce more pollutants than those that have higher pollutant abatement costs.It is recommended that effluent taxes are set by avoiding cutting it even at one stroke and considering the feasibility of pollution-reducing technology in various industries.It is necessary to reduce MAC of enterprises to better stimulate enterprises' or industries' emission reduction by preferential measures,such as high tax rate coordinated by speeding up the depreciation of environmental protection equipment.

Formulation of Organic Fertilizer Standard in Jiaxing City Based on NY525-2012

On the basis of research, analysis and argumentation, we conduct analysis and research on the current situation of quality of commercial organic fertilizer in Jiaxing City, and carry out the inspection and testing of organic matter indicators using the laboratory. Based on the standard of NY525-2012 Organic Fertilizer by the Ministry of Agriculture, this paper formulates the quality level indicators of local commercial organic fertilizer and adding specifications of raw materials.

Improved EEMD-based standardization method for developing long tree-ring chronologies

Long tree-ring chronologies can be developed by overlapping data from living trees with data from fossil trees through cross-dating.However,low-frequency climate signals are lost when standardizing tree-ring series due to the"segment length curse".To alleviate the segment length curse and thus improve the standardization method for developing long tree-ring chronologies,here we first calculated a mean value for all the tree ring series by overlapping all of the tree ring series.The growth trend of the mean tree ring width(i.e.,cumulated average growth trend of all the series)was determined using ensemble empirical mode decomposition.Then the chronology was developed by dividing the mean value by the growth trend of the mean value.Our improved method alleviated the problem of trend distortion.Long-term signals were better preserved using the improved method than in previous detrending methods.The chronologies developed using the improved method were better correlated with climate than those developed using conservative methods.The improved standardization method alleviates trend distortion and retains more of the low-frequency climate signals.