Experimentation of a 1-pixel bit reconfigurable ternary optical processor

A detailed experiment of 1-pixel bit reconfigurable ternary optical processor （TOP） is proposed in the paper. 42 basic operation units （BOUs） and 28 typical logic operators of the TOP are realized in the experiment. Results of the test cases elaborately cover the every combination of BOUs and all the nine inputs of ternary processor. Both the experiment process and results analysis are given in this paper. The experimental results demonstrate that the theory of reconfiguring a TOP is valid and that the reconfiguration circuitry is effective.

L^p CONTINUITY OF HRMANDER SYMBOL OPERATORS OpS_(0,0) ~m AND NUMERICAL ALGORITHM

If we use Littlewood-Paley decomposition, there is no pseudo-orthogonality for Ho¨rmander symbol operators OpS m 0 , 0 , which is different to the case S m ρ,δ （0 ≤δ 〈 ρ≤ 1）. In this paper, we use a special numerical algorithm based on wavelets to study the L p continuity of non infinite smooth operators OpS m 0 , 0 ; in fact, we apply first special wavelets to symbol to get special basic operators, then we regroup all the special basic operators at given scale and prove that such scale operator’s continuity decreases very fast, we sum such scale operators and a symbol operator can be approached by very good compact operators. By correlation of basic operators, we get very exact pseudo-orthogonality and also L 2 → L 2 continuity for scale operators. By considering the influence region of scale operator, we get H 1 （= F 0 , 2 1 ） → L 1 continuity and L ∞→ BMO continuity. By interpolation theorem, we get also L p （= F 0 , 2 p ） → L p continuity for 1 〈 p 〈 ∞ . Our results are sharp for F 0 , 2 p → L p continuity when 1 ≤ p ≤ 2, that is to say, we find out the exact order of derivations for which the symbols can ensure the resulting operators to be bounded on these spaces.

Model Identification Based on Subspace Model Identification of Main Steam Temperature in Ultra-Supercritical Coal-Fired Power Unit

Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature system of USC unit.Closed-loop SMI is applied to building step response model of the unit directly.The parameters selection method is proposed to deal with the parameter sensitivity and improve the reliability of the model.Finally,the model is used in model identification of real USC unit.

Dephosphorization stability of hot metal by double slag operation in basic oxygen furnace

Double slag process was adopted to produce low-phosphorus steel from middle-phosphorus hot metal.To achieve a stable dephosphorization operation,conventional process was modified as follows：the blowing time was extended by approximately 1min by reducing the oxygen supply flow rate;calcium ferrite pellets were added to adjust the slag composition and viscosity;the dumping temperature was lowered by 30-50°C by the addition of calcium ferrite pellets during the double slag process to prevent phosphorus in the slag from returning to the molten steel;and the bottom-blown gas flow was increased during the blowing process.For 40 heats of comparative experiments,the rate of dephosphorization reached 91% and ranged between 87% and 95%;the phosphorus,sulfur,manganese,and oxygen contents calculated according to the compositions of molten steel and slag as well as the temperature of molten steel at the end-point of the basic oxygen furnace process were similar to the equilibrium values for the reaction between the slag and the steel.Less free calcium oxide and metallic iron were present in the final slag,and the surface of the slag mineral phase was smooth,clear,and well developed,which showed that the slag exhibited better melting effects than that produced using the conventional slag process.A steady phosphorus capacity in the slag and stable dephosphorization effects were achieved.

Analysis of Basic Operation of China's Copper Rod Industry in First Quarter of 2017

1.Basic Situation of Copper Rod Production in the First Quarter of 2017In the first quarter of 2017,Antaike researched on 18 domestic copper rod companies and 24production lines involving a total capacity of5.235 million tons,accounting for around half of national total in-production capacity and over 60%of national total capacity of