Late Mesozoic basin and range tectonics and related magmatism in Southeast China

During the Late Mesozoic Middle Jurassic--Late Cretaceous, basin and range tectonics and associated magmatism representative of an extensional tectonic setting was widespread in southeastern China as a result of Pacific Plate subduction. Basin tectonics consists of post-orogenic （Type I） and intra-continental extensional basins （Type II）. Type I basins developed in the piedmont and intraland during the Late Triassic to Early Jurassic, in which coarse-grained terrestrial clastic sediments were deposited. Type II basins formed during intra-continental crustal thinning and were characterized by the development of grabens and half-grabens. Graben basins were mainly generated during the Middle Jurassic and were associated with bimodal volcanism. Sediments in half-grabens are intercalated with rhyolitic tufts and lavas and are Early Cretaceous in age with a dominance of Late Cretaceous-Paleogene red beds. Ranges are composed of granitoids and bimodal volcanic rocks, A-type granites and dome-type metamorphic core complexes. The authors analyzed lithological, geochemical and geochronological features of the Late Mesozoic igneous rock assemblages and proposed some geodynamical constraints on forming the basin and range tectonics of South China. A comparison of the similarities and differences of basin and range tectonics between the eastern and western shores of the Pacific is made, and the geo- dynamical evolution model of the Southeast China Block during Late Mesozoic is discussed. Studied results suggest that the basin and range terrane within South China developed on a pre-Mesozoic folded belt was derived from a polyphase tectonic evolution mainly constrained by subduction of the western Pacific Plate since the Late Mesozoic, leading to formation of various magmatism in a back-arc exten- sional setting. Its geodynamic mechanism can compare with that of basin and range tectonics in the eastern shore of the Pacific. Differences of basin and range tectonics between both shores of the Pacific, such as mantle plume formation, scales of extensional and igneous rock assemblages and the age of basin and range tectonics, were caused mainly by the Yellowstone mantle plume in the eastern shore of the Pacific.

MESOZOIC-CENOZOIC INVERSION OF THE TURPAN-HAMI BASIN, NORTHWEST CHINA

The Turpan-Hami basin, rich in coal and petroleum, is a superimposed basin of three types basins in different tectonic environments. This coal, oil and gas basin has undergone a complex tectonic-sedimentary evolution, in which two important stages were the negative inversion from a foredeep to a extensional basin during Early Mesozoic and the positive inversion to a thrust foreland basin in Late MesozoicEarly Cenozoic. The early normal faults residues are recognized with the addition of tectonic-sedimentary analysis to confirm the basin extension during Jurassic time and its tectonic inversion subsequently.

Earthquake-related Tectonic Deformation of Soft-sediments and Its Constraints on Basin Tectonic Evolution

The authors introduced two kinds of newly found soft-sediment deformation-synsedimentary extension structure and syn-sedimentary compression structure, and discuss their origins and constraints on basin tectonic evolution. One representative of the syn-sedimentary extension structure is syn-sedimentary boudinage structure, while the typical example of the syn-sedimentary compression structure is compression sand pillows or compression wrinkles. The former shows NW-SE-trendlng contemporaneous extension events related to earthquakes in the rift basin near a famous Fe-Nb-REE deposit in northern China during the Early Paleozoic （or Mesoproterozoic as proposed by some researches）, while the latter indicates NE-SW-trending contemporaneous compression activities related to earthquakes in the Middle Triassic in the Nanpanjiang remnant basin covering south Guizhou, northwestern Guangxi and eastern Yunnan in southwestern China. The syn-sedimentary boudinage structure was found in an earthquake slump block in the lower part of the Early Paleozoic Sailinhudong Group, 20 km to the southeast of Bayan Obo, Inner Mongolia, north of China. The slump block is composed of two kinds of very thin layers-pale-gray micrite （microcrystalline limestone） of 1-2 cm thick interbedded with gray muddy micrite layers with the similar thickness. Almost every thin muddy micrite layer was cut into imbricate blocks or boudins by abundant tiny contemporaneous faults, while the interbedded micrite remain in continuity. Boudins form as a response to layer-parallel extension （and/or layer-perpendicular flattening） of stiff layers enveloped top and bottom by mechanically soft layers. In this case, the imbricate blocks cut by the tiny contemporaneous faults are the result of abrupt horizontal extension of the crust in the SE-NW direction accompanied with earthquakes. Thus, the rock block is, in fact, a kind of seismites. The syn-sedimentary boudins indicate that there was at least a strong earthquake belt on the southeast side of the basin during the early stage of the Sailinhudong Group. This may be a good constraint on the tectonic evolution of the Bayan Obo area during the Early Paleozoic time. The syn-sedimentary compression structure was found in the Middle Triassic flysch in the Nanpanjiang Basin. The typical structures are compression sand pillows and compression wrinkles. Both of them were found on the bottoms of sand units and the top surface of the underlying mud units. In other words, the structures were found only in the interfaces between the graded sand layer and the underlying mud layer of the flysch. A deformation experiment with dough was conducted, showing that the tectonic deformation must have been instantaneous one accompanied by earthquakes. The compression sand pillows or wrinkles showed uniform directions along the bottoms of the sand layer in the flysch, revealing contemporaneous horizontal compression during the time between deposition and diagenesis of the related beds. The Nanpanjiang Basin was affected, in general, with SSW-NNE compression during the Middle Triassic, according to the syn-sedimentary compression structure. The two kinds of syn-sedimentary tectonic deformation also indicate that the related basins belong to a rift basin and a remnant basin, respectively, in the model of Wilson Cycle.

Evolution of the Paleogene succession of the western Himalayan foreland basin

The Paleogene succession of the Himalayan foreland basin is immensely important as it preserves evidence of India-Asia collision and related records of the Himalayan orogenesis.In this paper,the depositional regime of the Paleogene succession of the Himalayan foreland basin and variations in composition of the hinterland at different stages of the basin developments are presented.The Paleogene succession of the western Himalayan foreland basin developed in two stages,i.e.syncollisional stage and post-collisional stage.At the onset,chert breccia containing fragments derived from the hanging walls of faults and reworked bauxite developed as a result of erosion of the forebulge. The overlying early Eocene succession possibly deposited in a coastal system,where carbonates represent barriers and shales represent lagoons.Up-section,the middle Eocene marl beds likely deposited on a tidal flat.The late Eocene/Oligocene basal Murree beds,containing tidal bundles,indicate that a mixed or semi-diurnal tidal system deposited the sediments and the sedimentation took place in a tidedominated estuary.In the higher-up,the succession likely deposited in a river-dominated estuary or in meandering rivers.In the beginning of the basin evolution,the sediments were derived from the Precambrian basement or from the metasediments/volcanic rocks possessing terrains of the south.The early and middle Eocene（54.7-41.3 Ma） succession of the embryonic foreland possibly developed from the sediments derived from the Trans-Himalayan schists and phyllites and Indus ophiolite of the north during syn-collisional stage.The detrital minerals especially the lithic fragments and the heavy minerals suggest the provenance for the late Eocene/Oligocene sequences to be from the recycled orogenic belt of the Higher Himalaya,Tethyan Himalaya and the Indus-suture zone from the north during post-collisional stage.This is also supported by the paleocurrent measurements those suggest main flows directed towards southeast,south and east with minor variations.This implies that the river system stabilized later than 41 Ma and the Higher Himalaya attained sufficient height around this time.The chemical composition of the sandstones and mudstones occurring in the early foreland basin sequences are intermediate between the active and passive continental margins and/or same as the passive continental margins.The sedimentary succession of this basin has sustained a temperature of about 200 C and undergone a burial depth of about 6 km.

Evolution of the Late Cenozoic Tectonic Stress Regime in the Tianshui Basin,Northeast Tibetan Plateau

The Tianshui Basin,located inside the western Qinling orogenic belt and northeastern margin of the Tibetan Plateau （Fig.1）,is a NE-trending Late Cenozoic basin,which documents the neotectonic response of the northeastward growth of Tibetan Plateau.

STUDY ON THE TECTONIC STRESS FIELDS OF MESO-CENOZOIC IN LU'AN MINING AREA BY FINITE-ELEMENT SIMULATION

The structural de formation of Lu’ an mining area is characterized by a remarkable feature of zoning along E-W direction, in the east limb of Qinshui basin, Shanxi Province, China. The re gional tectonic stress fields and basement tectonics are two fundamental factors to control the cover tectonic framework. This paper uses the finite-element method with a elastic-plastic pIan problem model to simulate the three periods of stress fields resulting from field geological study’ Based on these works, the formation and evolution of tectonic framework of Lu’ an mining area have been discussed.

Minerogenic Theory of the Superlarge Lop Nur Potash Deposit, Xinjiang, China

Located in the eastern part of the Tarim basin, Xinjiang, the Lop Nur was an ultimate water catchment area of the Tarim basin during the Quaternary. Through nearly ten years of investigation and research, the authors have found a superlarge brine potash deposit in the Luobei subbasin—a secondary basin of the Lop Nur depression. The deposit has been mined now. On that basis, the authors propose new theories on the genesis of the potash rock deposit. In the tectonic and geomorphologic contexts, the Tarim basin lies in a 'high mountain-deep basin' environment. At the beginning of the Quaternary, influenced by the neotectonic movement, the Lop Nur evolved into a 'deep basin' in the Tarim basin. At the end of the middle Pleistocene, neotectonic migration began to take place in the interior of the Lop Nur and a new secondary deep basin—the Luobei subbasin—formed gradually. Despite its small area, it is actually the deepest subbasin in the Lop Nur depression, where brines of the Lop Nur Salt Lake gather and evaporate, thus providing materials for the formation of a superlarge brine potash rock deposit. With respect to the phenomenon of brine concentration and change with deepening of the lake, the authors propose a model of 'high mountain-deep basin' tectonic migration for potash concentration. In the sedimentological context, the honeycomb-shaped voids developed in glauberite rock in the subbasin are good space for potash-rich brine accumulation. Study indicates that the deposition of glauberite requires recharge of calcium-rich water. In the Tarim area the calcium-rich water might come from deep formation water or oilfield water, and the river water recharging the Lop Nur Salt Lake was rich in sulfate radicals and other components; in addition, the climate in the area was very dry and the brine evaporated steadily, thus resulting in deposition of substantial amount of glauberite, potash accumulation in intercrystal brine and final formation of the potash deposit. Generally, potash formation in a salt lake undergoes a three-stage process of 'carbonates—?sulfates (gypsum and glauberite)—^chlorides (halite etc.)', but in the study area there only occurred a two-stage process of 'carbonates—>sulfates (gypsum and glauberite)'. The authors call this new geological phenomenon the 'two-stage potash formation' model. In conclusion, the superlarge Lop Nur potash deposit is the result of combined 'high mountain-deep basin' tectonism and 'two-stage potash formation'.

Hydrocarbon accumulation in the deep waters of South China Sea controlled by the tectonic cycles of marginal sea basins

The tectonic cycle of the marginal sea basins in South China Sea(SCS)includes two cycles,i.e.,the formation and contraction of Palaeo-SCS and Neo-SCS.The northern part of SCS is a rift basin on a passive continental margin,while the the Nansha Block is a drifting rift basin.The southern part is a compound compressional basin on an active continental margin;the western part is a shear-extensional basin on a transform continental margin;the eastern part is an accretionary wedge basin on a subduction continental margin.The deep-water basins are mainly distributed on the continental slope and the the Nansha Block.There are three sets of source rocks in the deep-water areas of the northern continental margin in SCS,i.e.,Eocene terrestrial facies,early Oligocene transitional facies and late Oligocene marine facies.A set of Late Cretaceous-Early Oligocene terrestrial marine facies source rocks are developed in the drift-rift basin of SCS.Three sets of Oligocene,early Miocene and Mid-Miocene marine-terrestrial transitional facies source rocks are developed in the deep-water areas of both the southern and western continental margins of SCS.Four sets of reservoirs developed in the northern deep waters of SCS are dominated by deep sea fans.Two sets of reservoirs developed in the the Nansha Block are dominated by delta and biogenic reef.The southern part of SCS is dominated by deep sea fan and biogenic reef.Reservoirs of large channels and other clastic facies were developed in front of the estuaries,while biogenic reef bank was formed in the uplift zone.The hydrocarbon accumulation assemblages are mainly presented as Oligocene-Pliocene in the deep waters on the northern continental margin of SCS,Eocene-Lower Oligocene in the the Nansha Block,Oligocene-Pliocene and Oligocene-Miocene in the deep waters on the southern and western continental margin of SCS,respectively.The major hydrocarbon reservoir types in the deep waters of SCS are related to structural traps,deep water fans and biogenic reefs.The formation of basin,hydrocarbon and reservoir in the deep waters of SCS are controlled by the tectonic cycles of the marginal sea basins,revealing a great potential for hydrocarbon exploration.