基于CTM和Beam-Column Joint Element的梁柱节点核心区抗剪仿真

为研究基于CTM和Beam-Column Joint Element单元的钢筋混凝土梁柱节点核心区抗震仿真计算,本文先分析了CTM的计算原理和局限性,并对原计算模型进行调整;之后通过试验数据验证了调整前后模型的正确性,并通过参数分析得出调整前后CTM在不同参数下核心区抗剪强度的变化规律;最后通过对比理论计算与试验下核心区抗剪强度变化规律,证明调整后模型更为准确。

Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the plastic hinges （PHs） on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints （BCJs） during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

Seismic Behaviour of Beam-Column Joints of Precast and Partial Steel Reinforced Concrete

A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading.Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete( RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition,the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens,followed by column failure and connections failure. The failure of the core joint region occurs finally.Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.

Rapid Repair of Earthquake Damaged RC Interior Beam-wide Column Joints and Beam-wall Joints Using FRP Composites

This paper studies the seismic performance of FRP-strengthened RC interior non-seismically detailed beam-wide columns and beam-wall joints after limited seismic damage.Four eccentric and concentric beam-wide column joints and two beam-wall joints,initially damaged in a previous study,were repaired and tested under constant axial loads(0.1fc′Ag and 0.35fc′Ag) and lateral cyclic loading.The rapid repair technique developed,aimed to restore the original strength and to provide minimum drift capacity.The repair schemes were characterized by the use of:(a) epoxy injections and polymer modified cementitious mortar to seal the cracks and replace spalled concrete;and(b) glass(GFRP) and carbon(CFRP) sheets to enhance the joint performance.The FRP sheets were effectively prevented against possible debonding through the use of fiber anchors.Comparison between responses of specimens before and after repair clearly indicated reasonable restoration in strength,drift capacity,stiffness and cumulative energy dissipation capacity.All specimens failed with delamination of FRP sheets at beam-column joint interfaces.The rapid repair technique developed in this study is recommended for mass upgrading or repair of earthquake damaged beam-column joints.

Static behavior of semi-rigid thin-walled steel-concrete composite beam-to-column joints with bolted partial-depth flush end plate:experimental study

A new type of semi-rigid thin-walled steel-concrete composite beam-to-column joint has been proposed in this paper.Five semi-rigid composite beam-to-column joint specimens subjected to hogging moments under monotonic loading were tested to study the static behavior of this new type of joint.The main variable parameters for the five joint specimens were the longitudinal reinforcement ratio and the joint type.The experimental results designated that the magnitude of extension of the longitudinal reinforcement is the most important factor that influenced the moment-rotation characteristic of the new type of joint.The concrete slabs could resist 3.8%-19.1% of the total shear load applied to the cross-sections near the beam-to-column connection.The edge stiffened elements,such as the flange of the lipped I-section thin-walled steel beam,were capable of having considerable inelastic deformation capacity although they had comparatively large width-to-thickness ratios.The shear failure of the concrete cantilever edge strip must be taken into account in practical design because it has significant influence on the anchorage of the longitudinal reinforcement in the new type of external joints.

Seismic Behavor of RC Beam-Column Joint with Additional Bars under Cyclic Loading

The behavior of Beam-Column Joints in moment resisting frame structures are susceptible to damage caused by seismic effects due to poor performance of the joint.A good number of researches were carried out to understand the complex mechanism of RC joints which are considered in seismic design code practices presently adopted.The traditional construction detailing of transverse reinforcement have shown serious joint failure. This paper introduces a new design philosophy involving the use of additional diagonal bars within the joint particularly suitable for low to medium seismic effects in earthquake zones throughout the world.In lieu to this study,ten(10) full-scale interior beam-column specimens were constructed with various additional reinforcement details and configurations as will be discussed in the later.The experiment provided adequate results to proof the idea of additional bars as suitable approach in reinforced concrete structures where earthquake is eminent.While compared with overall cracking observation during the test,the specimen with additional bars (diagonal and straight) had shown few cracks on the column than the ones without.Furthermore,concrete confinement is certainly an important design method as recommended by certain international codes.

Finite Element Analysis (FEA) for the Beam-Column Joint Subjected to Cyclic Loading Was Performed Using ANSYS

This paper analyses the seismic performance of exterior beam-column joints strengthened with unconventional reinforcement detailing. The beam-column joint specimens were tested with reverse cyclic loading applied at the beam end. The samples were divided into two groups based on the joint reinforcement detailing. The first group (Group A) of three non-ductility specimens had joint detailing in accordance with the construction code of practice in India IS456-2000, and the second group (Group B) of three ductility specimens had joint reinforcement detailed as per IS13920-1993, with similar axial load cases as the first group. The experimental studies are proven with the analytical studies carried out by finite element models using ANSYS. The results show that the hysteresis simulation is satisfactory for both un-strengthened and ferrocement strengthened specimens. Furthermore, when ferrocement strengthening is employed, the strengthened beam-column joints exhibit better structural performance than the un-strengthened specimens of about 31.56% and 38.98 for DD-T1 and DD-T2 respectively. The analytical shear strength predictions were in line with the test results reported in the literature, thus adding confidence to the validity of the proposed models.

Study on Strengthening of RC Beam Column Joint Using Hybrid FRP Composites

Beam-Column joints are critical zones in reinforced concrete structures which are most vulnerable to earthquake forces. Hence strengthening beam-column joint is vital to save the structure and its inhabitants in case of seismic forces. Numerous retrofitting works using fibre reinforced polymer (FRP) composites are being undertaken worldwide. This work aims to investigate the effectiveness of strengthening beam-column joints using natural and artificial fibres. In this study, basalt (natural fibres) as monolithic composite (BFRP) and as hybrid composite along with glass (artificial fibres) were used for strengthening of beam-column joints. Totally six specimens were prepared and tested under monotonic loading. Specimen details used were: two control specimen, two specimens for monolithic wrapping and remaining two specimens for hybrid wrapping. The test results were compared with control and rehabilitated specimens. The performance of the treated joints was studied using the following parameters: initial and ultimate cracking loads, energy absorption, deflection ductility and stiffness at ultimate. From the test results, it was found that the hybrid combination of Basalt and Glass FRPs were found to be more effective in the treatment of beam-column joints. The strong column weak beam concept was achieved by failure in beam portion which helped in preventing the catastrophic failure of the entire structure.

新型钢管混凝土梁柱节点力学性能试验研究

为研究内加强环式圆钢管混凝土柱与矩形钢管混凝土梁这种新型连接节点的力学性能,设计了缩尺钢管混凝土梁柱节点试件,开展了相同梁柱节点试件的静力加载试验和低周往复加载试验。通过研究该节点试件的破坏模式、荷载-位移曲线以及拟静力加载试验的骨架曲线、核心区剪切变形等,分析了节点试件的承载能力、延性和耗能能力,全面考察了同一梁柱节点在静力加载和低周往复加载两种工况下的受力性能和破坏模式。结果表明:钢管混凝土梁柱节点试件核心区强度较强,破坏模式主要为梁端破坏,低周往复加载试验时试件梁柱连接处附近的梁端钢板发生拉裂破坏和钢板鼓曲,静力加载试验时试件梁端焊缝发生拉裂破坏;试件延性较好,加载过程中经历了弹性、弹塑性和塑性发展阶段。最后提出了该类钢管混凝土梁柱节点核心区的抗剪强度计算公式。

配筋PVA-钢混杂纤维增强水泥基复合材料梁柱边节点抗震性能试验研究

改善工程材料韧性和耐久性,提高框架梁柱节点抵抗变形和破坏的能力,是提高框架结构抗震韧性的有效途径之一。采用PVA-钢混杂纤维增强水泥基复合材料代替普通混凝土应用到梁柱边节点,考虑轴压比和加密区体积配箍率的影响,设计6个配筋PVA-钢混杂纤维增强水泥基复合材料、1个配筋单掺PVA纤维增强水泥基复合材料和1个钢筋混凝土梁柱边节点试件进行拟静力试验,分析其破坏形态、滞回曲线、骨架曲线、延性、耗能能力、钢筋应变和梁端塑性铰区转角,探讨混杂纤维的加入对梁柱边节点抗震性能的影响。结果表明:与钢筋混凝土节点和单掺PVA纤维增强水泥基复合材料节点相比,PVA-钢混杂纤维增强水泥基复合材料节点的承载力高、变形能力大、延性好、耗能能力强,抗震性能显著提升。当试验轴压比从0.12增加到0.24,梁端塑性铰区产生一定的外移,塑性性能发挥更充分,同时试件的变形能力、延性、耗能能力增加。在加密区体积配箍率减小的情况下,试件仍表现出良好的抗震性能。

基于转动摩擦铰阻尼器的干式装配梁-柱节点抗震性能试验

基于转动摩擦铰阻尼器(RFHD),提出了转动摩擦耗能干式装配梁-柱节点(DRFDBJ)。为了验证DRFDBJ结构对于实现预期力学性能的可行性和合理性,以施加在摩擦片表面的螺栓预紧力(P_(c))为变量,开展了2个工况下的DRFDBJ试件低周往复拟静力试验研究。结果表明:DRFDBJ结构的力学性能主要由RFHD提供并控制,试验中节点呈现了稳定的承载力和理想的变形、耗能能力,并实现了预期的损伤集中;2个不同P_(c)水准下节点承载力的试验值与理论值误差不超过5%,通过调整P_(c)可实现节点承载力的调控,为DRFDBJ结构承载力的可调控提供了支撑。

钢管混凝土柱-钢梁外加强环螺栓连接节点抗震性能有限元分析

为深入研究钢管混凝土柱-钢梁外加强环螺栓连接节点的抗震性能,建立了螺栓连接节点的精细化三维实体有限元模型。在对已有试验成果进行验证分析的基础上,研究加劲肋、螺栓连接数量对节点塑性耗能分配机制的影响。结果表明:当钢材本构后期考虑韧性损伤后,有限元计算结果与已有拟静力试验结果更吻合;CFST-1节点(梁高300 mm,有螺栓垫板)耗能能力最优,但仅达到相应焊接节点的一半;与CFST-1节点相比,CFST-3节点(梁高300 mm,无螺栓垫板)及CFST-2节点(梁高250 mm,有螺栓垫板)的总耗能更低;各螺栓节点的塑性耗能分配机制主要依靠梁耗能,而相应的加强环焊接节点主要依靠梁与加强环耗能;当螺栓节点采用环板加劲肋、4排螺栓以及腹板加劲肋构造优化后,刚度、承载力、延性与相应焊接节点一致,总塑性耗能达到刚接节点的79.1%,基本达到刚接节点的抗震水平。

新型装配式梁柱节点有限元参数分析

提出了一种装配式梁柱节点新形式,带悬臂梁段的框架柱与框架梁进行拼接,通过L形角钢进行节点加强,形成全螺栓装配式节点。为研究该节点的力学性能,以前期试验作为研究基础,对带悬臂梁段拼接的装配式新型梁柱节点采用ABAQUS软件进行参数分析。首先建立装配式梁柱节点的足尺试验模型,与试验结果进行对比验证;然后,对带悬臂梁段拼接节点进行参数化分析并且考虑加劲肋数量、横板厚度、耳板厚度、L形角钢长度和翼缘螺栓数量的因素,得到不同参数下节点的力学性能。

单边螺栓T型钢连接梁柱节点地震损伤性能评估

随着装配式钢结构在建筑工程领域的应用日益广泛,单边螺栓连接作为一种高效、便捷的连接方式,逐渐受到业界的青睐。H型钢梁、方钢管柱通过T型钢连接件和单边螺栓连接技术形成新型装配式钢框架结构,梁柱节点作为整个框架体系的核心,其抗震性能对整体结构的影响至关重要。为评估单边螺栓T型钢连接梁柱节点在地震过程中的损伤情况,开展了4种不同刚度单边螺栓T型钢连接梁柱节点的拟静力试验。通过试验,获得了单边螺栓T型钢连接梁柱节点的破坏模式、滞回性能和初始转动刚度,分析了不同刚度的T型钢连接件对梁柱节点的破坏模式、抗弯承载能力和转动刚度退化的影响。采用考虑残余变形累积损伤修正的Park-Ang损伤指数模型研究了试验中节点的损伤演化规律,结果表明:所提出的地震损伤模型能够较好地反映单边螺栓T型钢连接梁柱节点的损伤演化过程与破坏程度,为该类梁柱连接节点的优化设计和安全评估提供了理论依据和实践经验。

新型装配式型钢混凝土组合节点非线性分析

通过ABAQUS平台对新型装配式钢混组合节点试件进行有限元建模,基于试验结果,验证了该有限元模型的可靠性,并分析了节点盖板厚度和方钢管宽厚比对节点滞回性能、能量耗散及刚度退化等抗震性能的影响。结果表明:该新型节点具有良好的整体承载力及耗能能力;当增大节点盖板厚度时,试件的承载力、耗能及初始刚度均逐步增大,其峰值弯矩增幅约为17.6%,延性系数呈先增大后降低的变化趋势。当方钢管宽度一定时,节点承载力随着方钢管厚度的增大而增加,最大增幅约15.6%,但方钢管厚度对节点延性影响较小;当方钢管厚度一定时,节点的承载力变化较小,但其延性随着方钢管宽度的增大而增大,最大增幅约为24.2%;同时,方钢管宽厚比对新型节点强度和刚度退化性能的影响较为稳定。

新型带可更换耗能装置预制混凝土梁-柱节点抗震性能分析

该文提出了一种新型的带可更换耗能装置的预制混凝土梁柱节点。该装置主要由上下削弱钢板和开孔削弱H型钢板组成。设计了一个带有可更换耗能装置的试件和一个现浇整体试件,对其开展了梁端循环往复试验研究,探究了该节点的滞回响应、梁纵筋应变、极限承载能力、耗能能力、残余转角和震后可恢复性。试验结果表明,带可更换耗能装置的试件能够将塑性区域从梁柱的核心部分转移到耗能装置上,实现耗能装置耗能;在耗能装置屈服破坏时,梁柱仍为弹性状态;相比于现浇试件其耗能能力高出20%,该装置具有良好的耗能能力和震后可恢复性。

开槽侧板加强型连接梁柱节点子结构抗连续倒塌性能研究

为了优化侧板加强型节点的抗连续倒塌性能,提出了一种开槽侧板加强型梁柱连接节点形式。通过静力加载试验,得到了新型节点子结构的破坏模式、竖向抗力发展机制、应变分布、延性水平和动力承载力等。试验结果表明:钢梁翼缘在盖板附近首先开裂并向腹板外排螺栓中部延伸贯穿,导致竖向承载力快速下降为峰值荷载的20%左右。相比传统侧板加强型和圆弧扩盖板型梁柱节点,新型节点的峰值承载力分别提高了62.1%和19.6%,塑性弦转角分别提高了203.6%和25.8%。通过有限元分析得到了试件的断裂路径发展过程,进一步地通过参数化分析发现:扩大过焊孔构造对改善峰值后塑性弦转角及残余强度提升无明显作用;随着螺栓群远离钢梁翼缘起始断裂位置,最小残余强度比不断增大,但峰值后塑性弦转角呈先增大后减小的趋势;当螺栓群内移45mm时,峰值后塑性弦转角及最小残余强度比分别达到0.149rad和0.88,提高了38.2%和200.8%。

新型装配式框架节点地震损伤性能研究

梁柱节点的构造型式对框架结构的力学性能影响显著,该设计了一种新型装配式框架节点,为研究新型装配式框架节点的地震损伤性能,以连接方式和轴压比为设计参数,设计制作了8个节点试件进行低周循环试验,结合VIC-3D技术监测试件柱端表面应变,观察其破坏模式,分析了该节点的滞回曲线、延性和耗能能力等抗震性能指标,建立了适合于装配式节点的修正损伤模型。结果表明:新型装配式节点破坏模式为剪切破坏,主要破坏位置发生在混凝土与钢部件的连接处;装配式节点滞回曲线饱满,耗能能力强,装配式Z字形拼接节点的累积总耗能为现浇节点的1.75倍,表现出较好的抗震性能;装配式节点的延性系数在2.02~3.78,轴压比的增大会使节点承载力提高,延性降低;修正模型计算出的损伤发展曲线与实际情况吻合较好;连接方式的改变能够显著影响节点的损伤发展速率,轴压比越小,损伤发展速率越慢。最后,对装配式框架结构性态水平进行了参数量化,给出了性态水平与层间位移角、损伤指数、柱端表面峰值应变的对应关系,研究结果可为该类结构损伤评估及震后恢复提供理论依据。

蜂窝梁H型柱绕弱轴向端板连接节点抗震性能研究

目的 提出一种蜂窝梁H型柱绕弱轴向端板连接节点,探究节点抗震性能及不同因素对其影响规律,为相关设计提供借鉴。方法 理论分析蜂窝梁H型柱绕弱轴向端板连接节点传力机制,建立并验证蜂窝梁H型柱绕弱轴向端板连接节点ABAQUS模型,研究端板厚度、开孔率对节点初始转动刚度、承载能力、耗能能力、延性、刚度退化及破坏形式影响规律。结果 蜂窝梁H型柱绕弱轴向端板连接节点弯矩最终由柱腹板与正向端板抗弯、柱翼缘与侧向端板抗剪承担;剪力最终由高强摩擦型螺栓连接面间摩擦力承担;端板厚度及开孔率越大,节点耗能进入蜂窝梁耗能阶段越早,连接刚度足够时节点抗震性能主要取决于蜂窝梁。结论 提出了蜂窝梁H型柱绕弱轴向端板连接节点弯矩路径传递分配系数计算方法,建议节点端板厚度应大于1倍柱翼缘厚度,开孔率取值为60%~65%。

螺栓连接装配式梁柱节点抗火性能分析

目的研究一种新型螺栓连接装配式梁柱节点抗火性能,分析其高温下应力分布规律及破坏形式,为螺栓连接装配式梁柱节点抗火设计提供理论依据。方法采用ABAQUS有限元分析软件建立螺栓连接装配式梁柱节点模型,并采用顺序热力耦合方法对不同工况下螺栓连接装配式梁柱节点进行数值模拟;探讨梁端荷载比、混凝土保护层厚度以及受火方式等因素对螺栓连接装配式梁柱节点抗火性能影响。结果当混凝土保护层厚度由25 mm增加到30 mm时,节点耐火极限小幅增加;当混凝土保护层厚度由30 mm增加到35 mm时,节点耐火极限增加显著;与四面受火相比,三面受火时节点梁端位移受梁端荷载比、混凝土保护层厚度等参数的影响更明显;当梁端荷载比由0.7减小到0.5时,节点耐火极限增加了61%~68%;当混凝土保护层厚度由25 mm增加到35 mm时,节点耐火极限增加了10%~20%。结论节点耐火极限主要受节点区域内梁构件耐火极限影响;当梁端荷载比增加时,节点耐火极限减小;三面受火时节点耐火极限明显大于四面受火时节点耐火极限,故对梁上表面进行隔火处理可大幅度提升节点的耐火极限。