In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiat...In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiation area is required for the extracted ion beams,which is crucial because it directly affects the experimental precision and therapeutic effect.Specifically,ultra-large-area and high-uniformity scanning are crucial requirements for spacecraft radiation effects assessment and serve as core specification for beamline terminal design.In the 300 MeV proton and heavy ion accelerator complex at the Space Environment Simulation and Research Infrastructure(SESRI),proton and heavy ion beams will be accelerated and ultimately delivered to three irradiation terminals.In order to achieve the required large irradiation area of 320 mm×320 mm,horizontal and vertical scanning magnets are used in the extraction beam line.However,considering the various requirements for beam species and energies,the tracking accuracy of power supplies(PSs),the eddy current effect of scanning magnets,and the fluctuation of ion bunch structure will reduce the irradiation uniformity.To mitigate these effects,a beam uniformity optimization method based on the measured beam distribution was proposed and applied in the accelerator complex at SESRI.In the experiment,the uniformity is successfully optimized from 75%to over 90%after five iterations of adjustment to the PS waveforms.In this paper,the method and experimental results were introduced.展开更多
In the paper,the analytic static deflection solutions of uniform cantilever beams resting on nonlinear elastic rotational boundary are developed by the Modified Adomian Decomposition Method(MADM).If the applied force ...In the paper,the analytic static deflection solutions of uniform cantilever beams resting on nonlinear elastic rotational boundary are developed by the Modified Adomian Decomposition Method(MADM).If the applied force function is an analytic function,then the deflection function can be derived and expressed in Maclaurin series.A recurrence relation for the coefficients of the Maclaurin series is derived.It is shown that the proposed solution method is accurate and efficient.The solution method can be successfully applied to the uniform cantilever beam and non-linear elastic rotational boundary problem.展开更多
The excimer laser has important applications in many fields. Because of its non-uniform intensity distribution there are some limits in applications. This paper introduces rotational lens array to improve intensity di...The excimer laser has important applications in many fields. Because of its non-uniform intensity distribution there are some limits in applications. This paper introduces rotational lens array to improve intensity distributions. The intensity variation is reduced to 1 percent by computer simulation.展开更多
The development of irradiation processing industry brings about various types of irradiation objects and expands the irradiation requirements for better uniformity and larger areas. This paper proposes an innovative d...The development of irradiation processing industry brings about various types of irradiation objects and expands the irradiation requirements for better uniformity and larger areas. This paper proposes an innovative design of a permanent magnet electron beam spread system. By clarifying its operation principles, the author verifies the feasibility of its application in irradiation accelerators for industrial use with the examples of its application in electron accelerators with energy ranging from 300 keV to 1 MeV. Based on the finite element analyses of electromagnetic fields and the charged particle dynamics, the author also conducts a simulation of electron dynamics in magnetic field on a computer. The results indicate that compared with the traditional electron beam scanning system, this system boosts the advantages of a larger spread area, non-power supply, simple structure and low cost, etc., which means it is not only suitable for the irradiation of objects with the shape of tubes, strips and panels, but can also achieve a desirable irradiation performance on irregular constructed objects of large size.展开更多
This paper studies the stabilization problem of uniform Euler-Bernoulli beam with a nonlinear locally distributed feedback control. By virtue of nonlinear semigroup theory, energy-perturbed approach and polynomial mul...This paper studies the stabilization problem of uniform Euler-Bernoulli beam with a nonlinear locally distributed feedback control. By virtue of nonlinear semigroup theory, energy-perturbed approach and polynomial multiplier skill, the authors show that, corresponding to the different values of the parameters involved in the nonlinear locally distributed feedback control, the energy of the beam under the proposed feedback decays exponentially or in negative power of time t as t →∞.展开更多
In this paper, a new type of magnet is proposed and produced to give a uniform transverse beam profile.Compared to octupole magnets, the new type of magnet can provide a similar octupole magnet field in the middle,but...In this paper, a new type of magnet is proposed and produced to give a uniform transverse beam profile.Compared to octupole magnets, the new type of magnet can provide a similar octupole magnet field in the middle,but the rise rate declines quickly at the edges, so that a beam of the same uniformity is obtained with less particle loss.Besides that, a mechanical structure is added to adjust the width of the middle region to satisfy different transverse dimensions, which would further reduce particle loss. Some numerical simulations have been done with the octupole and the new type of magnet to show the advantages of the new magnet.展开更多
It has been reported that transverse distribution shaping can help to further enhance the energy extraction efficiency in a terawatt, tapered X-ray free-electron laser. Thus, methods of creating and keeping an almost ...It has been reported that transverse distribution shaping can help to further enhance the energy extraction efficiency in a terawatt, tapered X-ray free-electron laser. Thus, methods of creating and keeping an almost uniform transverse distributed(UTD) beam within undulators are required. This study shows that a UTD electron beam can be generated within evenly distributed drift sections where undulators can be placed, by means of octupoles and particular optics. A specific design is presented, and numerical simulations are performed to verify the proposed method.展开更多
In view of the existing electrical vibration monitoring traditional hydraulic pump vibration sensor, the high false alarm rate is susceptible to electromagnetic interference and is not easy to achieve long-term reliab...In view of the existing electrical vibration monitoring traditional hydraulic pump vibration sensor, the high false alarm rate is susceptible to electromagnetic interference and is not easy to achieve long-term reliable monitoring, based on the design of a beam of the uniform strength structure of the fiber Bragg grating (FBG) vibration sensor. In this paper, based on the analysis of the vibration theory of the equal strength beam, the principle of FBG vibration tuning based on the equal intensity beam is derived. According to the practical application of the project, the structural dimensions of the equal strength beam are determined, and the optimization design of the vibrator is carried out. The finite element analysis of the sensor is carried out by ANSYS, and the first order resonant frequency is 94.739 Hz. The vibration test of the sensor is carried out by using the vibration frequency of 35 Hz and the vibration source of 50 Hz. The time domain and frequency domain analysis results of test data show that the sensor has good dynamic response characteristics, which can realize the accurate monitoring of the vibration frequency and meet the special requirements of vibration monitoring of hydraulic pump under specific environment.展开更多
基金Supported by National Key R&D Program of China(2019YFA0405400)。
文摘In recent years,heavy ion accelerator technology has been rapidly developing worldwide and widely applied in the fields of space radiation simulation and particle therapy.Usually,a very high uniformity in the irradiation area is required for the extracted ion beams,which is crucial because it directly affects the experimental precision and therapeutic effect.Specifically,ultra-large-area and high-uniformity scanning are crucial requirements for spacecraft radiation effects assessment and serve as core specification for beamline terminal design.In the 300 MeV proton and heavy ion accelerator complex at the Space Environment Simulation and Research Infrastructure(SESRI),proton and heavy ion beams will be accelerated and ultimately delivered to three irradiation terminals.In order to achieve the required large irradiation area of 320 mm×320 mm,horizontal and vertical scanning magnets are used in the extraction beam line.However,considering the various requirements for beam species and energies,the tracking accuracy of power supplies(PSs),the eddy current effect of scanning magnets,and the fluctuation of ion bunch structure will reduce the irradiation uniformity.To mitigate these effects,a beam uniformity optimization method based on the measured beam distribution was proposed and applied in the accelerator complex at SESRI.In the experiment,the uniformity is successfully optimized from 75%to over 90%after five iterations of adjustment to the PS waveforms.In this paper,the method and experimental results were introduced.
文摘In the paper,the analytic static deflection solutions of uniform cantilever beams resting on nonlinear elastic rotational boundary are developed by the Modified Adomian Decomposition Method(MADM).If the applied force function is an analytic function,then the deflection function can be derived and expressed in Maclaurin series.A recurrence relation for the coefficients of the Maclaurin series is derived.It is shown that the proposed solution method is accurate and efficient.The solution method can be successfully applied to the uniform cantilever beam and non-linear elastic rotational boundary problem.
文摘The excimer laser has important applications in many fields. Because of its non-uniform intensity distribution there are some limits in applications. This paper introduces rotational lens array to improve intensity distributions. The intensity variation is reduced to 1 percent by computer simulation.
基金Supported by Specialized Research Fund for the Doctoral Program of Higher Education of China(20110142110054)
文摘The development of irradiation processing industry brings about various types of irradiation objects and expands the irradiation requirements for better uniformity and larger areas. This paper proposes an innovative design of a permanent magnet electron beam spread system. By clarifying its operation principles, the author verifies the feasibility of its application in irradiation accelerators for industrial use with the examples of its application in electron accelerators with energy ranging from 300 keV to 1 MeV. Based on the finite element analyses of electromagnetic fields and the charged particle dynamics, the author also conducts a simulation of electron dynamics in magnetic field on a computer. The results indicate that compared with the traditional electron beam scanning system, this system boosts the advantages of a larger spread area, non-power supply, simple structure and low cost, etc., which means it is not only suitable for the irradiation of objects with the shape of tubes, strips and panels, but can also achieve a desirable irradiation performance on irregular constructed objects of large size.
基金This research is supported by the National Science Foundation of China under Grant Nos. 10671166 and 60673101.
文摘This paper studies the stabilization problem of uniform Euler-Bernoulli beam with a nonlinear locally distributed feedback control. By virtue of nonlinear semigroup theory, energy-perturbed approach and polynomial multiplier skill, the authors show that, corresponding to the different values of the parameters involved in the nonlinear locally distributed feedback control, the energy of the beam under the proposed feedback decays exponentially or in negative power of time t as t →∞.
基金Supported supported by National Natural Science Foundation of China(11175195)
文摘In this paper, a new type of magnet is proposed and produced to give a uniform transverse beam profile.Compared to octupole magnets, the new type of magnet can provide a similar octupole magnet field in the middle,but the rise rate declines quickly at the edges, so that a beam of the same uniformity is obtained with less particle loss.Besides that, a mechanical structure is added to adjust the width of the middle region to satisfy different transverse dimensions, which would further reduce particle loss. Some numerical simulations have been done with the octupole and the new type of magnet to show the advantages of the new magnet.
基金Supported by National Natural Science Foundation of China(11475202,11405187)Youth Innovation Promotion Association of Chinese Academy of Sciences(2015009)
文摘It has been reported that transverse distribution shaping can help to further enhance the energy extraction efficiency in a terawatt, tapered X-ray free-electron laser. Thus, methods of creating and keeping an almost uniform transverse distributed(UTD) beam within undulators are required. This study shows that a UTD electron beam can be generated within evenly distributed drift sections where undulators can be placed, by means of octupoles and particular optics. A specific design is presented, and numerical simulations are performed to verify the proposed method.
基金This work was supported by the National Natural Science Foundation of China (No. 41404022) and the Shanxi National Science Foundation (No. 2015JM4128).
文摘In view of the existing electrical vibration monitoring traditional hydraulic pump vibration sensor, the high false alarm rate is susceptible to electromagnetic interference and is not easy to achieve long-term reliable monitoring, based on the design of a beam of the uniform strength structure of the fiber Bragg grating (FBG) vibration sensor. In this paper, based on the analysis of the vibration theory of the equal strength beam, the principle of FBG vibration tuning based on the equal intensity beam is derived. According to the practical application of the project, the structural dimensions of the equal strength beam are determined, and the optimization design of the vibrator is carried out. The finite element analysis of the sensor is carried out by ANSYS, and the first order resonant frequency is 94.739 Hz. The vibration test of the sensor is carried out by using the vibration frequency of 35 Hz and the vibration source of 50 Hz. The time domain and frequency domain analysis results of test data show that the sensor has good dynamic response characteristics, which can realize the accurate monitoring of the vibration frequency and meet the special requirements of vibration monitoring of hydraulic pump under specific environment.