Joint Allocation of Computing and Connectivity Resources in Survivable Inter-Datacenter Elastic Optical Networks

Inter-datacenter elastic optical networks(EON)need to provide the service for the requests of cloud computing that require not only connectivity and computing resources but also network survivability.In this paper,to realize joint allocation of computing and connectivity resources in survivable inter-datacenter EONs,a survivable routing,modulation level,spectrum,and computing resource allocation algorithm(SRMLSCRA)algorithm and three datacenter selection strategies,i.e.Computing Resource First(CRF),Shortest Path First(SPF)and Random Destination(RD),are proposed for different scenarios.Unicast and manycast are applied to the communication of computing requests,and the routing strategies are calculated respectively.Simulation results show that SRMLCRA-CRF can serve the largest amount of protected computing tasks,and the requested calculation blocking probability is reduced by 29.2%,28.3%and 30.5%compared with SRMLSCRA-SPF,SRMLSCRA-RD and the benchmark EPS-RMSA algorithms respectively.Therefore,it is more applicable to the networks with huge calculations.Besides,SRMLSCRA-SPF consumes the least spectrum,thereby exhibiting its suitability for scenarios where the amount of calculation is small and communication resources are scarce.The results demonstrate that the proposed methods realize the joint allocation of computing and connectivity resources,and could provide efficient protection for services under single-link failure and occupy less spectrum.

Analytical Investigation into the Rotational Performance of Glulam Bolted Beam-Column Connections under Coupled Bending Moment and Shear Force

Considering the glulam beam-column connection form and the number of bolts,monotonic loading test and finite element analysis was carried out on 9 connection specimens in 3 groups to study the rotational performance and failure mode of the connection.The test results revealed that compared with U-shaped connectors,T-shaped connectors can effectively improve the ductility of connections,and the increase in the number of bolts can reduce the initial stiffness and ductility of connections.By theoretical analysis,formulas for calculating the initial stiffness and ultimate moment of connections were deduced.Subsequently,the moment-rotation theoretical model of connections was established based on the formulas,which were validated according to the test data and simulation results.The proposed model can not only improve the current theoretical system of heavy-duty glulam beam-column structure but also provide a theoretical basis for calculating the mechanical properties of the glulam beam-column connection.

The Launching Ceremony of the Silk Road People-to-People Connectivity Donation Activity"Care for the Future"Held in Yangon

The launching ceremony of the Silk Road Peopleto-People"Connectivity donation activity"Care for the Future was jointly held by China Foundation for Peace and Development and the Myanmar-Chinese Cooperation&Communication Centre in Yangon on January 16.The Yangjin Middle School in Yangon Province of Myanmar received football,volleyball,badminton,notebooks,LED lights and other school utensils and sporting goods.

"Silk Road People-to-People Connectivity"China-Myanmar Friendly Cultural and Educational Exchanges Held inYangon

On January 1Oth,at the invitation of the Yangon University of Foreign Languages for its Cultural Exchanges Week,the China Foundation for Peace and Development and the Myanmar Chinese Cooperation&Communication Centre,jointly organised the"Silk Road People-to-People Connectivity"China-Myanmar Friendly Cultural and Educational Exchange activity.U Soe Thein,Chief Minister of Yangon Province,Zaw Myint,Deputy Minister of Education of Myanmar,and Kyi Shwin,President of Yangon University of Foreign Languages,attended the activity and delivered speeches.

Distributed Nash Equilibrium Seeking on Compact Action Sets over Jointly Strongly Connected Switching Networks

This paper studies the distributed Nash equilibrium seeking(DNES)problem for games whose action sets are compact and whose network graph is switching satisfying the jointly strongly connected condition.To keep the actions of all players in their action sets all the time,one has to resort to the projected gradient-based method.Under the assumption that the unique Nash equilibrium is the unique equilibrium of the pseudogradient system,an algorithm is proposed that is able to exponentially find the Nash equilibrium.Further,the authors also consider the distributed Nash equilibrium seeking problem for games whose actions are governed by high-order integrator dynamics and belong to some compact sets.Two examples are used to illustrate the proposed approach.

Seismic performance of interior precast concrete beam-column connections with T-section steel inserts under cyclic loading

An experimental investigation was conducted to study the performance of precast beam-column concrete connections using T-section steel inserts into the concrete beam and joint core,under reversed cyclic loading.Six 2/3-scale interior beam-column subassemblies,one monolithic concrete specimen and five precast concrete specimens were tested.One precast specimen was a simple connection for a gravity load resistant design.Other precast specimens were developed with different attributes to improve their seismic performance.The test results showed that the performance of the monolithic specimen M1 represented ductile seismic behavior.Failure of columns and joints could be prevented,and the failure of the frame occurred at the flexural plastic hinge formation at the beam ends,close to the column faces.For the precast specimens,the splitting crack along the longitudinal lapped splice was a major failure.The precast P5 specimen with double steel T-section inserts showed better seismic performance compared to the other precast models.However,the dowel bars connected to the steel inserts were too short to develop a bond.The design of the precast concrete beams with lap splice is needed for longer lap lengths and should be done at the beam mid span or at the low flexural stress region.

EFFECT OF Z-PINS’ DIAMETER,SPACING AND OVERLAP LENGTH ON CONNECTING PERFORMANCE OF CMC SINGLE LAP JOINT

The effect of through-thickness reinforcement by composite pins （Z-pins） on the static tensile strength and failure mechanisms of the joints made from ceramic matrix composite （CMC） is investigated. Overlap length of the single lap joint is 15 mm, 20 mm, 23 mm, 37 mm, and 60 mm, respectively. The experimental results indicate that the final failure modes of the joints can be divided into two groups, （a） the bond-line stops debonding until crack encounters Z-pins; and then the adherends break at the location of Z-pins, when overlap length is more than 20 mm; （b） the bond-line detaches entirely and Z-pins are drawn from adherends, when overlap length is equal to 15 mm. A simple efficient computational approach is presented for analyzing the benefit of through-thickness pins for restricting failure in the single lap joints. Here, the mechanics problem is simplified by representing the effect of the pins by tractions acting on the fracture surfaces of the cracked bond-line. The tractions are prescribed as functions of the crack displacement, which are available in simple forms that summarize the complex deformations to a reasonable accuracy. The resulting model can be used to track the evolution of complete failure mechanisms, for example, bond-line initial delamination and ultimate failure associated with Z-pin pullout, ultimate failure of the adherends. The paper simulates connecting performance of the single lap joints with different Z-pins＇ diameter, spacing and overlap length; the numerical results agree with the experimental results; the numerical results indicate enlarging diameter and decreasing spacing of Z-pins are in favor of improving the connecting performance of the joints. By numerical analysis method, the critical overlap length that lies between two final failure modes is between 18 mm and 19 mm, when Z-pins＇ diameter and spacing are 0.4 mm, 5 mm, respectively.

Pushover analysis of reinforced concrete frames considering shear failure at beam-column joints

Since most current seismic capacity evaluations of reinforced concrete （RC） frame structures are implemented by either static pushover analysis （PA） or dynamic time history analysis, with diverse settings of the plastic hinges （PHs） on such main structural components as columns, beams and walls, the complex behavior of shear failure at beam-column joints （BCJs） during major earthquakes is commonly neglected. This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures. Based on the specifications of FEMA-356, a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established, allowing a sophisticated PA to be performed. To verify the validity of this method, the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements. By considering shear failure at BCJs, the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames, including seismic capacity and the progressive failure sequence of joints, in a precise and effective manner.

Influence of the column-to-beam flexural strength ratio on the failure mode of beam-column connections in RC frames

The column-to-beam flexural strength ratio(CBFSR)has been used in many seismic codes to achieve the strong column-weak beam(SCWB)failure mode in reinforced concrete(RC)frames,in which plastic hinges appear earlier in beams than in columns.However,seismic investigations show that the required limit of CBFSR in seismic codes usually cannot achieve the SCWB failure mode under strong earthquakes.This study investigates the failure modes of RC frames with different CBFSRs.Nine typical three-story RC frame models with different CBFSRs are designed in accordance with Chinese seismic codes.The seismic responses and failure modes of the frames are investigated through time-history analyses using 100 ground motion records.The results show that the required limit of the CBFSR that guarantees the SCWB failure mode depends on the beam-column connection type and the seismic intensity,and different types of beam-column connections exhibit different failure modes even though they are designed with the same CBFSR.Recommended CBFSRs are proposed for achieving the designed SCWB failure mode for different types of connections in RC frames under different seismic intensities.These results may provide some reference for further revisions of the SCWB design criterion in Chinese seismic codes.

Seismic Behaviour of Beam-Column Joints of Precast and Partial Steel Reinforced Concrete

A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading.Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete( RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition,the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens,followed by column failure and connections failure. The failure of the core joint region occurs finally.Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.

Connective Tissue Energy Loss Comparison between Joints with and without Hypermobility

Joint hypermobility syndrome is a condition in which a joint can move effortlessly beyond the normal limit of motion expected for that joint. This syndrome is affected by some factors including gender and tends to be inherited. It may cause some symptoms such as pain in an individual’s synovial joints. The objective of the current study was to compare the energy loss of connective tissues between joints with and without hypermobility. A differential equation model, namely the Kelvin-Voigt model, was used for the energy loss analysis. The results show the difference in energy loss for the tissues attached to joints with and without joint hypermobility. As the stiffness of the connective tissue decreases, the energy loss increases. Muscle activity about the ankle was measured via electromyography during simple functional tasks, and the recorded data were used to correlate with the theoretical analysis of the energy loss. The result would shed light on the pathology analysis of the symptoms such as the cause of pain.

Cyclic Shear Tests on Key Connection Joints of Modularized Constructions

Modularized construction is a new type of prefabricated building system with green environmental protection and excellent performance. There are few studies on the seismic performance of its key connection joint. This paper presents a new type of assembled connection joint for the high-rise modularized construction. Cyclic shear tests of full-scale joints were carried out, and the key indexes of their seismic performances including the hysteretic performance, ductility, and energy dissipation capacity were analyzed and obtained. The results show that the hysteresis loops of longitudinal and lateral cyclic shear tests were both plump in shapes. The ductility coefficients were 4.54 and 4.98, and the energy dissipation coefficients were 1.83 and 1.43, respectively. The test joint had good ductility and energy dissipation capacity. The positions of yield failure of specimens were mainly concentrated in the connection areas between the column and short beam or end-plate. The research can provide the technical reference for the seismic design and engineering application of related modularized constructions.

Finite Element Analysis (FEA) for the Beam-Column Joint Subjected to Cyclic Loading Was Performed Using ANSYS

This paper analyses the seismic performance of exterior beam-column joints strengthened with unconventional reinforcement detailing. The beam-column joint specimens were tested with reverse cyclic loading applied at the beam end. The samples were divided into two groups based on the joint reinforcement detailing. The first group (Group A) of three non-ductility specimens had joint detailing in accordance with the construction code of practice in India IS456-2000, and the second group (Group B) of three ductility specimens had joint reinforcement detailed as per IS13920-1993, with similar axial load cases as the first group. The experimental studies are proven with the analytical studies carried out by finite element models using ANSYS. The results show that the hysteresis simulation is satisfactory for both un-strengthened and ferrocement strengthened specimens. Furthermore, when ferrocement strengthening is employed, the strengthened beam-column joints exhibit better structural performance than the un-strengthened specimens of about 31.56% and 38.98 for DD-T1 and DD-T2 respectively. The analytical shear strength predictions were in line with the test results reported in the literature, thus adding confidence to the validity of the proposed models.

Mechanical characteristic and failure mechanism of joint with composite sucker rod

Composite sucker rods are widely used in oil fields because of light weight,high strength,and corrosion resistance.Bonded technology becomes the primary connection method of composites.However,the joints with composite sucker rods are prone to debone and fracture.The connected characteristics are less considered,so the failure mechanism of the joint is still unclear.Based on the cohesive zone model(CZM)and the Johnson-Cook constitutive model,a novel full-scale numerical model of the joint with composite sucker rod was established,and verified by pull-out experiments.The mechanical properties and slip characteristics of the joint were studied,and the damaged procession of the joint was explored.The results showed that:a)the numerical model was in good agreement with the experimental results,and the error is within 5%;b)the von Mises stress,shear stress,and interface stress distributed symmetrically along the circumferential path increased gradually from the fixed end to the loading end;c)the first-bonded interface near the loading end was damaged at first,followed by debonding of the second-bonded interface,leading to the complete shear fracture of the epoxy,and resulted in the debonding of the joint with composite sucker rod,which can provide a theoretical basis for the structural design and optimization of the joint.

MAKE CONCERTED EFFORTS TO BRING OUR HEARTS CLOSER FOR JOINTLY BUILDING BELT AND ROAD KEYNOTE ADDRESS AT THE THEMATIC SESSION ON PEOPLE-TO-PEOPLE CONNECTIVITY, BELT AND ROAD FORUM FOR INTERNATIONAL COOPERATION

Distinguished Guests,Ladies and gentlemen,Dear friends,Good afternoon.Let me begin by extending my warmest welcome to all of you to this thematic session on peopleto-people connectivity on behalf of the International Department of the CPC Central Committee,the organizer of this event.Thanks to the concerted efforts

装配式混凝土剪力墙结构接缝连接研究进展

装配式剪力墙结构拼装时存在大量的水平接缝和竖向接缝,由于剪力墙的刚度较大,接缝连接处易存在刚度不足引起的损伤集聚问题,成为影响结构整体性和抗震性能的决定性因素。总结了国内外正在发展的预制装配式剪力墙结构水平和竖向接缝的连接形式,并对各类连接形式的构造特点、抗震性能、应用优势和技术瓶颈进行了系统阐述和分析,在此基础上探讨了装配式剪力墙结构接缝连接技术的发展方向。结果表明:目前湿式连接技术已较为成熟且被广泛应用,但仍存在现场湿作业量大、质量不易检测和控制等问题;干式连接技术工业化程度高,但对施工精度的要求也高,可能产生的螺栓松动、锈蚀以及磨损问题限制了其工程应用;将消能减震技术融入竖向接缝连接,利用超高性能混凝土实现水平接缝连接,并结合可恢复功能防震技术,是未来装配式剪力墙结构高质量发展的新增长点。

Road Connectivity Promotes People-to-People Understanding

Laos,a friendly neighbor of China,has been actively promoting the Belt and Road Initiative(BRI).In recent years,China and Laos have achieved fruitful results in jointly building a community of shared future by strengthening economic and trade cooperation.Since the China-Laos Railway opened to traffic in 2021,it has been serving as a“golden route”for regional connectivity with cross-border freight capacity and positive spillover effects being continuously enhanced to promote economic and trade cooperation and cultural exchanges between China and Laos as well as ASEAN countries.

The "Silk Road People-to-People Connectivity" Series Activity Successfully Launched in Cambodia

On December 19,2023,China NGO Network for International Exchanges,the China Foundation for Peace and Development,and the Cambodia Civil Society Alliance Forum jointly held the groundbreaking ceremony of the"silk Road Peopleto-People Connectivity"Series Activity of China-Cambodia livelihood projects in Phnom Penh,Cambodia.

骨架膜装配式节点设计与承载力分析

提出的骨架膜结构装配式节点具有构造简单、预制程度高、便于现场装配、可以调节消减加工误差、适应各种形状的骨架膜结构、传力清晰等特点。基于Hertz接触理论分析了该节点的关键承载结构——销轴连接的应力分布形式并与有限元分析相互印证。基于有限元分析得出了该节点中杆件与耳板最佳的连接方式,对该节点的三维模型进行简化并建立有限元模型,计算了该节点的极限承载能力,得到其破坏形式并与同规格的空间相贯焊接钢管节点进行对比。结果表明:该装配式节点的失效由下弦杆控制,满足“强节点,弱杆件”的设计要求;该装配式节点的极限承载能力为设计荷载的2.95倍,与同规格的空间相贯焊接钢管节点几乎相同,有充足的安全余量,可以更加灵活地应用于各种建筑结构中。

蜂窝梁H型柱绕弱轴向端板连接节点抗震性能研究

目的 提出一种蜂窝梁H型柱绕弱轴向端板连接节点,探究节点抗震性能及不同因素对其影响规律,为相关设计提供借鉴。方法 理论分析蜂窝梁H型柱绕弱轴向端板连接节点传力机制,建立并验证蜂窝梁H型柱绕弱轴向端板连接节点ABAQUS模型,研究端板厚度、开孔率对节点初始转动刚度、承载能力、耗能能力、延性、刚度退化及破坏形式影响规律。结果 蜂窝梁H型柱绕弱轴向端板连接节点弯矩最终由柱腹板与正向端板抗弯、柱翼缘与侧向端板抗剪承担;剪力最终由高强摩擦型螺栓连接面间摩擦力承担;端板厚度及开孔率越大,节点耗能进入蜂窝梁耗能阶段越早,连接刚度足够时节点抗震性能主要取决于蜂窝梁。结论 提出了蜂窝梁H型柱绕弱轴向端板连接节点弯矩路径传递分配系数计算方法,建议节点端板厚度应大于1倍柱翼缘厚度,开孔率取值为60%~65%。