Estimation of the Forces on Rubbing Rotor-Bearing System

It*ss very important to identify the load on rotor bearing system. Based on load identification in time domain, a new method combined with transfer matrix method is applied in rubbing rotor bearing system to estimate the force on rubbing rotor for the first time. Avoiding calculating the modal parameters, the outside excitation force on multi point and the distribute of internal forces on rubbing rotor bearing system can be identified by this way at the same time. Finally, the simulation is made on partial lateral rubbing rotor bearing system. For the faulty of rotor/stator rub, the point where rubbing occurs and the change of impact forces can be detected by this method in order to improve the accuracy of rotor/stator rub faulty diagnosis.

Dynamic Responses of Rotor Drops onto Double-decker Catcher Bearing

In an active magnetic bearing （AMB） system, the catcher bearings （CBs） are indispensable to protect the rotor and stator in case the magnetic bearings fail. Most of the former researches associated with CBs are mainly focused on the dynamic responses of the rotor drops onto traditional single-decker catcher bearings （SDCBs）. But because of the lower limited speed of SDCB, it cannot withstand the ultra high speed rotation after rotor drop. In this paper, based on the analysis of the disadvantages of SDCBs, a new type of double-decker catcher bearings （DDCBs） is proposed to enhance the CB work performance in AMB system. In order to obtain thc accurate rotor movements before AMB failure, the dynamic characteristics of AMB are theoretically derived. Detailed simulation models containing rigid rotor model, contact model between rotor and inner race, DDCB force model as well as heating model after rotor drop are established. Then, using those established models the dynamic responses of rotor drops onto DDCBs and SDCBs are respectively simulated. The rotor orbits, contact forces, spin speeds of various parts and heat energies after AMB failure are mainly analyzed. The simulation results show that DDCBs can effectively improve the CBs limit rotational speed and reduce the following vibrations, impacts and heating. Finally, rotor drop experiments choosing different types of CBs are carried out on the established AMB test bench. Rotor orbits, inner race temperatures as well as the rotating speeds of both inner race and intermediate races after rotor drop are synchronously measured. The experiment results verify the advantages of DDCB and the correctness of theoretical analysis. The studies provide certain theoretical and experimental references for the application of DDCBs in AMB system.

Rotor dynamic analysis of small vehicle gasoline turbocharger in semi-floating bearings

The critical speed and unbalance response of a small vehicle gasoline turbocharger in semi-floating bearing are analyzed.The dynamical characters of semi-floating bush bearing used in small vehicle gasoline turbocharger were summarized by comparing the structure and shaft rigid mode of semi-floating bush bearings with those of floating bush bearings.The rotor model was built.The first,second and third mode of critical speeds of rotor system were computed,and the changes in the compressor or turbine bushing bearing clearances were analyzed.Compared with the experiment data,the accuracy and the rationality of computation model were verified.The unbalance response and time transient rotor response were also computed.

ANALYSIS ON MOTION STABILITY OF A HIGH-SPEED ROTOR-BEARING SYSTEM

A non-linear dynamic model of one type of high-speed rotor system with gassupporting system is set up. The laws between the capacity force and the parameters of bearing, thestatic equilibrium position and rotating speed are studied on the basis of above model. Then, thefailure rotating, speed is given in the working state, and the relation between the minimum failurerotating speed and clearance of bearing is also studied. At last, the stability and failurecondition are discussed in different working conditions.

Analysis on Dynamic Performance for Active Magnetic Bearing-Rotor System

In the application of active magnetic bearings (AMB), one of the key problems to be solved is the safety and stability in the sense of rotor dynamics. The project related to the present paper deals with the method for analyzing bearing rotor systems with high rotation speed and specially supported by active magnetic bearings, and studies its rotor dynamics performance, including calculation of the natural frequencies with their distribution characteristics, and the critical speeds of the system. One of the targets of this project is to formulate a theory and method valid for the analysis of the dynamic performance of the active magnetic bearing rotor system by combining the traditional theory and method of rotor dynamics with the analytical theory and design method based on modern control theory of the AMB system.

Research on a Rigid Rotor-Sliding Bearing System with a Squeeze Film Damper

In this paper, a dynamic model on a rigid rotor sliding bearing system with a SFD is established. The stability and bifurcation behaviors of the system are studied. On the basis of the differential equations of fluid momentum and mass continuity, the distribution pressure function is derived by taking oil film inertia force into consideration. Damping force, clearance excitation force, interference force of different frequencies and static load are also considered in the model. Finally, the governing equations of the stability and bifurcation behaviors of the system are solved by Floquet theory. Simulation of dynamic model shows that the rigid rotor sliding bearing system can maintain stability and exhibit a Hopf bifurcation phenomenon in a certain range.

A new nonlinear force model to replace the Hertzian contact model in a rigid-rotor ball bearing system

A new nonlinear force model based on experimental data is proposed to replace the classical Hertzian contact model to solve the fractional index nonlinearity in a ball bearing system. Firstly, the radial force and the radial deformation are measured by statics experiments, and the data are fitted respectively by using the Hertzian contact model and the cubic polynomial model. Then~ the two models are compared with the approximation formula appearing in Aeroengine Design Manual. In consequence, the two models are equivalent in an allowable deformation range. After that, the relationship of contact force and contact deformation for single rolling element between the races is cal- culated based on statics equilibrium to obtain the two kinds of nonlinear dynamic models in a rigid-rotor ball bearing system. Finally~ the displacement response and frequency spectrum for the two system models are compared quantitatively at different rotational speeds, and then the structures of frequency-amplitude curves over a wide speed range are compared qualitatively under different levels of radial clearance, amplitude of excitation, and mass of supporting rotor. The results demonstrate that the cubic polynomial model can take place of the Hertzian contact model in a range of deformation.

Nonlinear Vibration Induced by the Water-film Whirl and Whip in a Sliding Bearing Rotor System

Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

Experimental Investigation on Vibration Control of Rotor-bearing System with Active Magnetic Exciter

Vibration control is an efficient way to minimize a rotating machine’s vibration level so that its vibration fault-free can be realized.While,several factors,such as unbalance,misalignment and instability,contribute to the serious vibration of rotating machines.It is necessary that one apparatus can depress vibration caused by two or more reasons.The fault self-recovery(FSR) mechanism is introduced and investigated.Strategies of vibration control are investigated theoretically using numerical method firstly.Active magneticelectric exciter(AME) are selected as the actuator of a FSR device because it can provide suitable force by varying the control current in the exciters depending upon a proportional and derivative control law.By numerical study,it is indicate that only a small control force is needed to improve stability margins of the compressor and prevent subsynchronous vibration fault efficiently.About synchronous vibration,three control strategies,searching in whole circle,fast optimizing control(FOC),and none mistaking control,are investigated to show which of the control strategy can realize the fault self-recovery in the shortest time.Experimental study is conducted on a test rig with variable rotating speed.Results of the test indicate that the non-mistake control strategy can minimize synchronous vibration in less than three seconds.The proposed research can provide a new insight for subsynchronous and synchronous vibration restraining about centrifugal compressor.

Dynamic Characteristics of Multi-degrees of Freedom System Rotor-bearing System with Coupling Faults of Rub-impact and Crack

Extensive studies on rotor systems with single or coupled multiple faults have been carried out. However these studies are limited to single-span rotor systems. A finite element model for a complex rotor-bearing system with coupled faults is presented. The dynamic responses of the rotor-bearing system are obtained by using the rotor dynamics theory and the modern nonlinear dynamics theory in connection with the continuation-shooting algorithm（commonly used for obtaining a periodic solution for a nonlinear system） for a range of rub-impact clearances and crack depths. The stability and Hopf instability of the periodic motion of the rotor-bearing system with coupled faults are analyzed by using the procedure described. The results indicate that the finite element method is an effective way for determining the dynamic responses of such complex rotor-bearing systems. Further for a rotor system with rub-impact and crack faults, the influences of the clearances are significantly different for different rub-impact stiffness. On the contrary, the influence of crack depths is rather small. The instability speeds of the rotor-bearing system increase due to the presence of the crack fault. The results obtained using the new finite element model, presented for computation and analysis of dynamic responses of the rotor-bearing systems with coupled faults, are in accordance with measurements in experiment. The formulations given can be used for diagnosis of faults, vibration control, and safe and stable operations of real rotor-bearing systems.

NONLINEAR DYNAMIC CHARACTERISTICS OF HYDRODYNAMIC JOURNAL BEARING-FLEXIBLE ROTOR SYSTEM

The nonlinear dynamic behaviors of flexible rotor system with hydrodynamicbearing supports are analyzed. The shaft is modeled by using the finite element method that takesthe effect of inertia and shear into consideration. According to the nonlinearity of thehydrodynamic journal bearing-flexible rotor system, a modified modal synthesis technique withfree-interface is represented to reduce degrees-of-freedom of model of the flexible rotor system.According to physical character of oil film, variational constrain approach is introduced tocontinuously revise the variational form of Reynolds equation at every step of dynamic integrationand iteration. Fluid lubrication problem with Reynolds boundary is solved by the isoparametricfinite element method without the increasing of computing efforts. Nonlinear oil film forces andtheir Jacobians are simultaneously calculated and their compatible accuracy is obtained. Theperiodic motions are obtained by using the Poincare -Newton-Floquet (PNF) method. A method,combining the predictor-corrector mechanism to the PNF method, is presented to calculate thebifurcation point of periodic motions to be subject to change of system parameters. The localstability and bifurcation behaviors of periodic motions are obtained by Floquet theory. The chaoticmotions of the bearing-rotor system are investigated by power spectrum. The numerical examples showthat the scheme of this study saves computing efforts but also is of good precision.

Stability Analysis on Rotor Systems Supported by Self-acting Tilting-pad Gas Bearings with Frequency Effects

The recent research on stability of gas bearing-rotor systems still mostly adopts the same method as in oil-lubricated bearing-rotor systems.The dynamic coefficients of gas bearings in the case that the perturbation frequencies are same as the rotating speed are used to carry out the stability analysis of rotor systems.This method does not contact the frequency characteristics of dynamic stiffness and damping coefficients of gas bearings with the dynamical behaviors of rotor systems.Furthermore,the effects of perturbation frequencies on the stability of systems are not taken into account.In this paper,the dynamic stiffness and damping coefficients of tilting-pad gas bearings are calculated by the partial derivative method.On the base of solution of dynamic coefficients,two computational models are produced for stability analysis on rotor systems supported by tilting-pad gas bearings according to whether the degrees of the freedom of pads tilting motions are included in the equations of motion or not.In the condition of considering the frequency effects of dynamic coefficients of tilting-pad gas bearings,the corresponding eigenvalues of the rigid and first five vibration modes of the system with the working speeds of 8-30 kr/min are computed through iteratively solving the equations of motion of rotor-system by using two computational models,respectively.According to the obtained eigenvalues,the stability of rotor system is analyzed.The results indicate that the eigenvalues and the stability of rotor system obtained by these two computational models are well agreement each other.They all can more accurately analyze the stability of rotor systems supported by tilting-pad gas bearings.This research has important meaning for perfecting the stability analysis method of rotor systems supported by gas bearings.

Simulations and Experimental Investigation on Motion Stability of a Flexible Rotor-bearing System with a Transverse Crack

In the classical process for stability studies on the rotor-bearing system with crack faults, the simple discrete model is adopted for research on such problems, which neglect some needful dynamical influence factor, such as the material damping, shearing effect and gyroscopic effects, etc. Therefore, it is necessary to find a precise calculation model for simulation of the rotor-bearing system with cracks faults. In this paper, instead of the traditional simple discrete model, finite element （FE） model is adopted to investigate the motion stability of a nonlinear rotor system with crack fault. According to finite element theory, the FE model of the cracked rotor system is established firstly. It should be pointed out that the element where the crack occurs is modeled by a particular crack element and the supports at both ends are simulated by two nonlinear loads. Then, based on dimensionless and dimensionality reduction, the Newmark-[3 method and the shooting method are employed to study the effect of eccentricity and the depth of crack on instability speed and bifurcation feature. Furthermore, the simulation results are verified by some corresponding experiments. The simulation and experimental results show that instability speed does not change monotonically, but decreases firstly and then increases when the amount of eccentricity increases. Moreover, as the type of instability changes, the instability speed jumps concomitantly. Additionally, the presence of crack fault can disturb the oil whirl, as a result, instability speed tends to increase slightly, but it does not affect the type of instability and jumping phenomenon. This research presents an effective and convenient method which uses the finite element method （FEM） to research the motion stability of the nonlinear rotor-bearing system with cracked faults and other nonlinear force, and the proposed method can provide a theoretical reference for stability analysis and vibration control in more complex relevant rotor-bearing system.

Coupled lateral-torsional-axial vibrations of a helical gear-rotor-bearing system

Considering the axial and radial loads, a math- ematical model of angular contact ball bearing is deduced with Hertz contact theory. With the coupling effects of lateral, torsional and axial vibrations taken into account, a lumped-parameter nonlinear dynamic model of helical gearrotor-bearing system （HGRBS） is established to obtain the transmission system dynamic response to the changes of dif- ferent parameters. The vibration differential equations of the drive system are derived through the Lagrange equation, which considers the kinetic and potential energies, the dis- sipative function and the internal/external excitation. Based on the Runge-Kutta numerical method, the dynamics of the HGRBS is investigated, which describes vibration properties of HGRBS more comprehensively. The results show that the vibration amplitudes have obvious fluctuation, and the frequency multiplication and random frequency components become increasingly obvious with changing rotational speed and eccentricity at gear and bearing positions. Axial vibration of the HGRBS also has some fluctuations. The bearing has self-variable stiffness frequency, which should be avoided in engineering design. In addition, the bearing clearance needs little attention due to its slightly discernible effect on vibration response. It is suggested that a careful examination should be made in modelling the nonlinear dynamic behavior of a helical gear-rotor-bearing system.

Singularity analysis of Jeffcott rotor-magnetic bearing with time delays

A Jeffcott rotor-magnetic bearing with time delays is investigated in this paper. Firstly, it is found that the characteristic equation of the system satisfies the conditions of the singularity. Secondly, the center manifold reduction and normal form are employed to study the bifurcation from simple zero and zero-purely imaginary singularities. The results of this paper will help to understand the influence of the time delays in feedback loop on the dynamics of rotor-magnetic bearing system.

Nonlinear Dynamic Analysis of Coupled Gear-Rotor-Bearing System with the Effect of Internal and External Excitations

Extensive studies on nonlinear dynamics of gear systems with internal excitation or external excitation respectively have been carried out. However, the nonlinear characteristics of gear systems under combined internal and external excitations are scarcely investigated. An eight-degree-of-freedom（8-DOF） nonlinear spur gear-rotor-bearing model, which contains backlash, transmission error, eccentricity, gravity and input/output torque, is established, and the coupled lateral-torsional vibration characteristics are studied. Based on the equations of motion, the coupled spur gear-rotor-bearing system（SGRBS） is investigated using the Runge-Kutta numerical method, and the effects of rotational speed, error fluctuation and load fluctuation on the dynamic responses are explored. The results show that a diverse range of nonlinear dynamic characteristics such as periodic motion, quasi-periodic motion, chaotic behaviors and impacts exhibited in the system are strongly attributed to the interaction between internal and external excitations. Significantly, the changing rotational speed could effectively control the vibration of the system. Vibration level increases with the increasing error fluctuation. Whereas the load fluctuation has an influence on the nonlinear dynamic characteristics and the increasing excitation force amplitude makes the vibration amplitude increase, the chaotic motion may be restricted. The proposed model and numerical results can be used for diagnosis of faults and vibration control of practical SGRBS.

Optimization of a Flexible Rotor-Sliding Bearing System With a Squeeze Film Damper

A dynamic model of a flexible rotor-sliding bearing system ( FRSBS ) with asqueeze film damper ( SFD) is established. Considered in the model are oil film inertia force,damping farce, clearance excitation force, interference force of different frequencies and staticload, as opposed to previous research. On the basis of this model, the optimal design of the systemis deeply studied. Simulation shows that the system optimization design can effectively improve thesystem stability.

INFLUENCE OF UNBALANCE ON LOW-FREQUENCY VIBRATION OF ROTOR-BEARING SYSTEM

The influence of unbalance on low-frequency vibration exists whenthere are nonlinear factors in oil film force. Based on the Muszpeka oil film mod-el , a theoretical proof is presented. Some new results are obtained based on the im-proved simulation meth

Bearing loads of dual rotor-bearing system under stationary and transient conditions

Aimed at aeroengine vibration failure, bearing loads of dual rotor-bearing system caused by unbalance are calculated under stationary and transient conditions. The three-dimensional （3-D） finite element method （FEM） model of dual rotor-bearing system was established. Applying the ro- tor dynamics function of Ansys 12.0, bearing loads were calculated under various unbalance force in stationary condition, and the transient vibration characteristics and the effect of acceleration on bearing loads were discussed. On the basis of simulation results, the influence disciplines of unbal- ance on bearing loads and theoretic reference for reducing bearing loads during start-up were ob- tained.

Bifurcation and chaos in nonlinear rotor-bearing system

Bifurcation and chaos in rigid Jefccott rotor bearing system are studied, by following the multi variable Floquet theory. By calculating the largest Lyapunov exponent, the chaotic motion and ″periodic window″ phenomena are found for a certain bifurcation parameter. The results show that the motion of the rotor system features a complicated nonlinear dynamics phenomena, such as period doubling bifurcation, saddle node bifurcation, secondary Hopf bifurcation and chaotic motion.