Research on the Influence of Raceway Waviness on the Vibration Characteristics of Deep Groove Ball Bearings

The dynamics model of a 2-degree-of-freedom deep groove ball bearing is established by incorporating the raceway surface waviness model comprising multiple sinusoidal functions superposition.The model is solved using the fourth-order Runge-Kutta method to obtain the vibration characteristics including displacement,velocity,acceleration,and frequency of the bearing.Validation of the model is accomplished through comparison with theoretical vibration frequencies.The influence of the amplitude of waviness of the inner and outer ring raceway surfaces of deep groove ball bearings on the vibration displacement,peak-to-peak vibration displacement and root-mean-square vibration acceleration is analyzed,and the results show that as the amplitude of the inner and outer ring raceway surfaces waviness increases,all the vibration characteristic indexes increase,indicating that the vibration amplitude of the bearings as well as the energy of the waviness-induced shock waveforms increase with the increase of the amplitude of the waviness.

Effect of nozzle inlet parameters on the dry granulation atomization process of Si_(3)N_(4) ceramic bearing balls

In this paper,the atomization characteristics of Si3N4 ceramic dry granulation affect the performance of Si3N4 ceramic bearing balls.In order to improve the dry granulation characteristics and the comprehensive performance of Si3N4 ceramic bearing balls,the atomization mechanism of the spinning nozzle used for Si3N4 dry granulation was studied in detail.The interaction between air and binder in the pressure-swirl nozzle is analyzed based on VOF method,the modified realizable k−εturbulence model is used to simulate the flow field inside and outside the pressure-swirl nozzle,the effects of nozzle inlet parameters including the number of tangential inlets and the deflection angle of tangential inlets on the binder volume fraction,velocity distribution and pressure distribution are analyzed.The results show that when the number of tangential inlets increases from 1 to 4,the swirl strength of gas–liquid two-phase in the nozzle increases,the mean diameter of air core increases from 1.51 mm to 2.01 mm,and the spray cone angle increases from 18.5◦to 26.4◦.Besides,when the deflection angle of tangential inlet increases from 0◦to 15◦,the swirl strength of gas–liquid two-phase in the nozzle with the deflection angle of tangential inlet of 10◦is the largest,and the mean diameter of air core and spray cone angle is 3.04 mm and 30.7◦,respectively.Based on the atomization experiment platform of the electric control fuel system,the mean diameter of air core and spray cone angle are measured,the micromorphology of Si3N4 particles is observed,which verifies the correctness of numerical simulation.When the Si3N4 particles are prepared by dry granulation,taking the atomization performance of nozzle into consideration,the pressure-swirl nozzle with 4 tangential inlets and 10◦deflection angle should be selected.

Analysis of dynamic characteristics of self-aligning ball bearing

A dynamics model of the self-aligning ball bearing is proposed based on the Jones-Harris method （JHM）, and a computer program is developed to solve the equations by using the Newton-Raphson method. A parametric analysis of the centrifugal force and the gyroscopic moment, the contact loads, the contact angles, the radial deformation and the radial stiffness is carried out. The analytical results show that the applied loads and the rotational speed are two main factors that can influence the distributions of the contact loads and values of the contact angles. The centrifugal force and the gyroscopic moment increase with the increase in the rotational speed, resulting in the decrease of the inner raceway contact load and the increase of the outer raceway contact load. The outer raceway contact angle increases under the centrifugal force; on the contrary, the inner raceway contact angle decreases. Furthermore, the differences between the inner and the outer contact angles increase with the increase in the rotational speed. The higher rotational speed results in the decrease in radial stiffness for the self-aligning ball bearing, and the raceway curvature coefficient, to some extent, also influences the radial stiffness.

Quasi-static Analysis of Thrust-loaded Angular Contact Ball Bearings Part Ⅰ:Theoretical Formulation

Ball bearings play an important role in various rotating machineries,but the complicated kinematic and tribological features of ball bearings make many aspects of their operating behaviors still inconclusive.Most theoretical analyses of ball bearings up to date are based on either the hypothesis of race control or other empirical models to determine the ball motion of ball bearings,but none of these strategies can reveal and consequently employ the intrinsic coupling mechanism between the spin and the tangential traction of contacting bodies rolling upon one another.To remedy the deficiency of current analytical models for ball bearing analysis,the rolling contact theory is employed to establish an explicit link between motions and interactions within ball bearings.A differential slip model is established to precisely define the slip component due to the significant curvature of the common contact patches between the ball and inner/outer raceways.The creepage and the spin ratio are formulated to accurately define the relative rigid motion between the ball and the inner/outer raceway.Then a quasi-static analytical model is established that can accurately determine the motions of the balls and races of the ball bearing.It can also give a vivid description of the slip and traction distributions within the contact area.The analytical model can be effectively used to analyze the operational conditions and tribological features of solid-lubricated ball bearings.It can also be used optimize the construction of ball bearings for specific applications.

Dynamic Stability Analysis of Cages in High-Speed Oil-Lubricated Angular Contact Ball Bearings

To investigate the cage stability of high-speed oil-lubricated angular contact ball bearings, a dynamic model of cages is developed on the basis of Gupta’s and Meeks’ work. The model can simulate the cage motion under oil lubrication with all six degrees of freedom. Particularly, the model introduces oil-film damping and hysteresis damping, and deals with the collision contact as imperfect elastic contact. In addition, the effects of inner ring rotational speed, the ratio of pocket clearance to guiding clearance and applied load on the cage stability are investigated by simulating the cage motion with the model. The results can provide a theoretical basis for the design of ball bearing parameters.

Quasi-static Analysis of Thrust-loaded Angular Contact Ball Bearings Part Ⅱ:Results and Discussion

Ball bearings are widely employed mechanical components characterized by high precision and quality,and usually play important roles in various rotary machines and mechanisms.Many advanced applications require a deep understanding of their various kinematic and tribological characteristics that are essential to predict the fatigue endurance,relieve the vibration and minimize the power dissipation of ball bearings in particular applications.An angular contact ball bearing under a specified operating condition is simulated with the quasi-static/creepage analytical model proposed in the preceding article.The results demonstrate that the ball bearing is a statically determinate system.That the balls spin on both inner and outer races means the ball is controlled by neither the inner nor the outer raceway.The friction between the ball and raceway renders the inner and outer contact angles unequal.The larger the coefficient of friction is,the larger the angle deviation.The tangential traction perpendicular to the rolling direction due to the spin induces a gyro-like rotation of the ball with respect to the raceway even if no inertial effects are considered.The tangential elastic compliance of contacting surfaces gives rise to locked areas within the contact patch and transforms the sliding lines from circles into spirals.The differential slip due to the close conformity of the ball and raceway makes the sliding and traction distributions asymmetric,which will influence the location of the spinning center of the ball with respect to the raceway.The quasi-static/creepage model can be used to reveal the operating behaviors of ball bearings running under steady conditions and to optimize the design of ball bearings for specific applications.

Numerical analysis of loaded stress and central displacement of deep groove ball bearing

The aim of this work is to develop a three-dimensional model of deep groove ball bearing to investigate the loaded stresses and central displacements of bearing rings. The equivalent stresses and central displacements of bearing rings are obtained based on the simulated analysis. Moreover, several parameters, such as load magnitude, raceway groove curvature radius(RGCR), thicknesses of outer and inner rings, are varied to investigate their effects on the equivalent stresses and central displacements of bearing rings. Research results provide useful guidelines for determining the design parameters.

Air flow patterns and noise analysis inside high speed angular contact ball bearings

The vortex formed around the rolling ball and the high pressure region formed around the ball-raceway contact zone are the principle factors that barricades the lubricant entering the bearing cavity, and further causes improper lubrication. The investigation of the air phase flow inside the bearing cavity is essential for the optimization of the oil-air two-phase lubrication method. With the revolutionary reference frame describing the bearing motion, a highly precise air phase flow model inside the angular contact ball bearing cavity was build up. Comprehensive factors such as bearing revolution, ball rotation, and cage structure were considered to investigate the influences on the air phase flow and heat transfer efficiency. The aerodynamic noise was also analyzed. The result shows that the ball spinning leads to the pressure rise and uneven pressure distribution. The air phase velocity, pressure and cage heat transfer efficiency increase as the revolving speed increases. The operating noise is largely due to the impact of the high speed external flow on the bearing. When the center of the oil-air outlet fixes near the inner ring, the aerodynamic noise is reduced. The position near the inner ring on the bigger axial side is the ideal position to fix the lubricating device for the angular contact ball bearing.

Research on the Critical Speed of a Mixed-Flow Turbocharger with Hybrid Ceramic Ball Bearing

The critical speeds for a vehicle turbocharger with hybrid ceramic ball bearing are researched. The ball bearing-rotor system produces resonance when it working in critical speed and that makes the turbocharger injury working for a long time. The calculation and analysis methods of the critical speed for the vehicle turbocharger are described. The critical speed is computed by two methods including Riccati transfer matrix and DyRoBeS finite element method for a vehicle turbocharger with hybrid ceramic ball bearing. The vibration experiment had been taken to validate the calculating result, Comparison between the results by two calculation methods and the test results show that the first critical speed differences are 6.47 % and 5.66 %, the second critical speed differences are 2.87 % and 2.94 % respectively. And then, the primary factors which influence the critical speed are analyzed, the conclusions will be helpful for the vehicle turbocharger bearing-rotor system design.

Reliability Based Design Optimization of Aero-Engine Spindle Ball Bearings

Aero-engine spindle ball bearings work in harsh conditions which are affected by relatively complex stresses. One of the key factors which affects bearing performance is its structure. In this paper,we used reliability based design optimization method to solve the structure design problem of aero-engine spindle ball bearings.Compared with the optimization design method, the value of equivalent dynamic load using reliability optimization design method was the least by MATLAB simulation. Also the design solutions show that the optimized structure possesses higher reliability than the original solution.

Quasi Dynamic Calculation of Local Stiffness of Angular Contact Ball Bearings

In order to describe the performance of thin wall bearing on rotor system more accurate,the simplified model of bearing local stiffness was proposed. The load distribution and local contact deformation in angular contact ball bearings were calculated using quasi dynamic calculation method. Based on the relationship of local load to contact deformation,the calculation model of local bearing stiffness was subsequently built to get radial and axial components of local stiffness. Effects of external loads on the local bearing stiffness were analyzed. The results showed that local stiffness in bearings is symmetric to the axis of radial load,and its value has a maximum on the symmetry axis along the radial load direction. External radial and axial load have different effects on local bearing stiffness.

Nonlinear dynamic behaviors of ball bearing rotor system

Nonlinear forces and moments caused by ball bearing were calculated based on relationship of displacement and deflection and quasi-dynamic model of bearing.Five-DOF dynamic equations of rotor supported by ball bearings were estimated.The Newmark-β method and Newton-Laphson method were used to solve the equations.The dynamic characteristics of rotor system were studied through the time response,the phase portrait,the Poincar?maps and the bifurcation diagrams.The results show that the system goes through the quasi-periodic bifurcation route to chaos as rotate speed increases and there are several quasi-periodic regions and chaos regions.The amplitude decreases and the dynamic behaviors change as the axial load of ball bearing increases;the initial contact angle of ball bearing affects dynamic behaviors of the system obviously.The system can avoid non-periodic vibration by choosing structural parameters and operating parameters reasonably.

A new nonlinear force model to replace the Hertzian contact model in a rigid-rotor ball bearing system

A new nonlinear force model based on experimental data is proposed to replace the classical Hertzian contact model to solve the fractional index nonlinearity in a ball bearing system. Firstly, the radial force and the radial deformation are measured by statics experiments, and the data are fitted respectively by using the Hertzian contact model and the cubic polynomial model. Then~ the two models are compared with the approximation formula appearing in Aeroengine Design Manual. In consequence, the two models are equivalent in an allowable deformation range. After that, the relationship of contact force and contact deformation for single rolling element between the races is cal- culated based on statics equilibrium to obtain the two kinds of nonlinear dynamic models in a rigid-rotor ball bearing system. Finally~ the displacement response and frequency spectrum for the two system models are compared quantitatively at different rotational speeds, and then the structures of frequency-amplitude curves over a wide speed range are compared qualitatively under different levels of radial clearance, amplitude of excitation, and mass of supporting rotor. The results demonstrate that the cubic polynomial model can take place of the Hertzian contact model in a range of deformation.

Dynamic Analysis of Flexible Cage of High-speed Angular Contact Ball Bearing

A dynamics formula was established for the flexible cage of high-speed angular contact ball bearing. A modified Craig-Bampton component mode synthetic method was used to establish the formula with regard to the flexibility of cage and based on a dynamic analysis of angular contact ball bearing,and a rigid-flexible multi-body dynamic analysis program was developed using ADAMS,which is verified by a computation example of Gupta. The results show that it's not likely to keep the rotation smoothness of cage when the ratio of pocket clearance to guiding clearance and the ratio of radial load to axial load become too large or too small. By comparison,the flexible cage runs more smoothly than the rigid cage.

Finite Element Analysis of 6300 Deep Groove Ball Bearing

Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.

NONLINEAR STABILITY OF BALANCED ROTOR DUE TO EFFECT OF BALL BEARING INTERNAL CLEARANCE

Stability and dynamic characteristics of a bail bearing-rotor system are investigated under the effect of the clearance in the ball bearing. Different clearance values are assumed to calculate the nonlinear stability of periodic solution with the aid of the Flo- quet theory. Bifurcation and chaos behavior are analyzed with variation of the clearance and rotational speed. It is found that there are three routes to unstable periodic solution. The period-doubling bifurcation and the secondary Hopf bifurcation are two usual routes to instability. The third route is the boundary crisis, a chaotic attractor occurs suddenly as the speed passes through its critical value. At last, the instable ranges for different internal clearance values are described. It is useful to investigate the stability property of ball bearing rotor system.

Bifurcation of Periodic Motion of Rigid Rotor System Supported by Angular Contact Ball Bearings

Rotor systems supported by angular contact ball bearings are complicated due to nonlinear Hertzian contact force. In this paper, nonlinear bearing forces of ball bearing under five-dimensional loads are given, and 5-DOF dynamic equations of a rigid rotor ball bearing system are established. Continuation-shooting algorithm for periodic solutions of the nonlinear non-autonomous dynamic system and Floquet multipliers of the system are used. Furthermore, the bifurcation and stability of the periodic motion of the system in different parametric domains are also studied. Results show that the bifurcation and stability of period-1 motion vary with structural parameters and operating parameters of the rigid rotor ball bearing system. Avoidance of unbalanced force and bending moment, appropriate initial contact angle, axial load and damping factor help enhance the unstable rotating speed of period-1 motion.

Modeling of Rolling Contact Friction of Ball Bearings at Elevated Temperature

In order to predict the rolling friction coefficient and analyze the effects of material compatibility on the friction coefficient at elevated temperature(from room temperature to 600℃),a theoretic computation model was developed based on bearing's elastic contact hysteresis and related material characteristic parameters.Some examples were carried out to verify the feasibility of the model.The research results show that the material compatibility has significant effects on rolling friction coefficient,especially the modulus of elasticity and the expansion coefficient of material,and results also show the rolling friction coefficient of the matched pair between GCr15 and Si3N4 is the smallest comparing with that between GCr15 and M50(or ASP-23,or GCr15) when making GCr15,M50,ASP-23,and Si3N4 materials as bearing's rolling balls and GCr15 material as bearing's inner and outer rings.Further research indicates that the working temperature also has played an important role in the rolling friction coefficient of the ball bearing,moreover,the friction coefficient of the matched pair of M50 and Si3N4 behaves most stably at elevated temperature.

Numerical Research of the Influences of the Outer Raceway Curvature Radii on the EHL Properties of Ball Bearing

Based on numerical simulation, the influences of outer raceway curvature radii on some EHL properties of deep groove ball bearing were studied in detail. It was found that the second peak film pressure value decreases with the increase of curvature radius Ry. The minimal film thickness increases at first and then decreases with the increase of curvature radius Ry. The minimum film thickness reaches the maximal value when curvature radius Ry is about 1.7r. Film thickness becomes thinner with the increase of Rx with keeping other parameters constant. The conclusions obtained in this paper are very helpful to practical design of ball bearings.

Analysis of Rolling Contact Bearings Test Data by the Bımodal Method

Lieblein J. and Zelen A. conducted a study of the fatigue life of deep groove ball bearings. This study was based on data of 4948 bearings as obtained from 5 companies and 213 test groups. Among these data is a detailed test report #3183, lot 73, consisting of 23 failed bearings. This report states that the Weibull slope of this group is 2.23, meaning that this distribution is mono sloped. These test data were plotted by the author on a bilinear scale plane, of endurance life versus bearing number and proved to be distinctly bi sloped. This basic difference prompted a wide study resulting in several new findings and set the grounds for a new analysis method.