In this study, we present a complete structural analysis ofAllomyrina dichotoma beetle＇s hind wings by investigating their static and dynamic characteristics. The wing was subjected to the static loading to determine...In this study, we present a complete structural analysis ofAllomyrina dichotoma beetle＇s hind wings by investigating their static and dynamic characteristics. The wing was subjected to the static loading to determine its overall flexural stiffness. Dy- namic characteristics such as natural frequency, mode shape, and damping ratio of vibration modes in the operating frequency range were determined using a Bruel ＆ Kjaer fast Fourier transform analyzer along with a laser sensor. The static and dynamic characteristics of natural Allomyrina dichotoma beetle＇s hind wings were compared to those of a fabricated artificial wing. The results indicate that natural frequencies of the natural wing were significantly correlated to the wing surface area density that was defined as the wing mass divided by the hind wing surface area. Moreover, the bending behaviors of the natural wing and artificial wing were similar to that of a cantilever beam. Furthermore, the flexural stiffness of the artificial wing was a little higher than that of the natural one whereas the natural frequency of the natural wing was close to that of the artificial wing. These results provide important information for the biomimetic design of insect-scale artificial wings, with which highly ma- neuverable and efficient micro air vehicles can be designed.展开更多
In this work, we develop an artificial foldable wing that mimics the hind wing of a beetle （Allomyrina dichotoma）. In real flight, the beetle unfolds forewings and hind wings, and maintains the unfolded configuratio...In this work, we develop an artificial foldable wing that mimics the hind wing of a beetle （Allomyrina dichotoma）. In real flight, the beetle unfolds forewings and hind wings, and maintains the unfolded configuration unless it is exhausted. The artificial wing has to be able to maintain a fully unfolded configuration while flapping at a desirable flapping frequency. The artificial foldable hind wing developed in this work is based on two four-bar linkages which adapt the behaviors of the beetle＇s hind wing. The four-bar-linkages are designed to mimic rotational motion of the wing base and the vein folding/unfolding motion of the beetle＇s hind wing. The behavior of the artificial wings, which are installed in a flapping-wing system, is observed using a high-speed camera. The observation shows that the wing could maintain a fully unfolded configuration during flapping motion. A series of thrust measurements are also conducted to estimate the force generated by the flapping-wing system with foldable artificial wings. Although the artificial foldable wings give added burden to the flapping-wing system because of its weight, the thrust measurement results show that the flapping-wing system could still generate reasonable thrust.展开更多
文摘In this study, we present a complete structural analysis ofAllomyrina dichotoma beetle＇s hind wings by investigating their static and dynamic characteristics. The wing was subjected to the static loading to determine its overall flexural stiffness. Dy- namic characteristics such as natural frequency, mode shape, and damping ratio of vibration modes in the operating frequency range were determined using a Bruel ＆ Kjaer fast Fourier transform analyzer along with a laser sensor. The static and dynamic characteristics of natural Allomyrina dichotoma beetle＇s hind wings were compared to those of a fabricated artificial wing. The results indicate that natural frequencies of the natural wing were significantly correlated to the wing surface area density that was defined as the wing mass divided by the hind wing surface area. Moreover, the bending behaviors of the natural wing and artificial wing were similar to that of a cantilever beam. Furthermore, the flexural stiffness of the artificial wing was a little higher than that of the natural one whereas the natural frequency of the natural wing was close to that of the artificial wing. These results provide important information for the biomimetic design of insect-scale artificial wings, with which highly ma- neuverable and efficient micro air vehicles can be designed.
文摘In this work, we develop an artificial foldable wing that mimics the hind wing of a beetle （Allomyrina dichotoma）. In real flight, the beetle unfolds forewings and hind wings, and maintains the unfolded configuration unless it is exhausted. The artificial wing has to be able to maintain a fully unfolded configuration while flapping at a desirable flapping frequency. The artificial foldable hind wing developed in this work is based on two four-bar linkages which adapt the behaviors of the beetle＇s hind wing. The four-bar-linkages are designed to mimic rotational motion of the wing base and the vein folding/unfolding motion of the beetle＇s hind wing. The behavior of the artificial wings, which are installed in a flapping-wing system, is observed using a high-speed camera. The observation shows that the wing could maintain a fully unfolded configuration during flapping motion. A series of thrust measurements are also conducted to estimate the force generated by the flapping-wing system with foldable artificial wings. Although the artificial foldable wings give added burden to the flapping-wing system because of its weight, the thrust measurement results show that the flapping-wing system could still generate reasonable thrust.
