The dynamic tensile behaviors of a newly developed Ti-6 Al-2 Sn-2 Zr-3 Mo-1 Cr-2 Nb-Si alloy（referred as TC21 in China） over a wide range of strain rates from quasi-static to dynamic regimes(0.001-1 200 s-1) at diff...The dynamic tensile behaviors of a newly developed Ti-6 Al-2 Sn-2 Zr-3 Mo-1 Cr-2 Nb-Si alloy（referred as TC21 in China） over a wide range of strain rates from quasi-static to dynamic regimes(0.001-1 200 s-1) at different temperatures were experimentally investigated. A split Hopkinson tension bar apparatus and a static material testing system were utilized to study the stress-strain responses under uniaxial tension loading condition. The experimental results indicate that the tensile behavior of TC21 titanium alloy is dependent on the strain rate and temperature. The values of initial yield stress increase with increasing strain rate and decreasing temperature. The effects of strain rate and temperature on the initial yield behavior are estimated by introducing two sensitivity parameters. The phenomenological-based constitutive model, Johnson-Cook model, is suitably modified to describe the rate-temperature dependent constitutive behavior of TC21 titanium alloy. It is observed that the modified model is in good agreement with the experimental data subjected to the investigated range of strain rates and temperatures.展开更多
Polypropylene（PP）/ethylene-octene copolymer（POE） blends were prepared with a twin-screw extruder.Their dynamic mechanical behavior were systematically investigated.The results show that PP/POE blends are heterogen...Polypropylene（PP）/ethylene-octene copolymer（POE） blends were prepared with a twin-screw extruder.Their dynamic mechanical behavior were systematically investigated.The results show that PP/POE blends are heterogeneities with a partial compatible two-phase structure,the glass transition temperature of PP phases in the blends tends to shift towards high temperature with increasing the POE content,and the glass transition temperature of POE phases shifts towards the low temperature with increasing the PP content.The Kerner＇s dispersed phase model and co-continuous phase model can reasonably predict the visco-elasticity of PP/POE blends with different compositions.Additionally,the morphological structure of the blends can be estimated via comparing the predicted DMA behavior with the experimental data.展开更多
The Blume-Capel model in the presence of external magnetic field H has been simulated using a cellular automaton algorithm improved from the Creutz cellular automaton in three-dimension lattice. The field critical exp...The Blume-Capel model in the presence of external magnetic field H has been simulated using a cellular automaton algorithm improved from the Creutz cellular automaton in three-dimension lattice. The field critical exponent 5 is estimated using the power law relations and the finite size scaling functions for the magnetization and the susceptibility in the range -0.1≤ h = H/J ≤0. The estimated value of the field critical exponent 5 is in good agreement with the universal value （δ = 5） in three dimensions. The simulations are carried out on a simple cubic lattice under periodic boundary conditions.展开更多
基金Funded by the National Natural Science Foundation of China Academy of Engineering Physics and Jointly Set up “NSAF” Joint Fund(No.U1430119)
文摘The dynamic tensile behaviors of a newly developed Ti-6 Al-2 Sn-2 Zr-3 Mo-1 Cr-2 Nb-Si alloy（referred as TC21 in China） over a wide range of strain rates from quasi-static to dynamic regimes(0.001-1 200 s-1) at different temperatures were experimentally investigated. A split Hopkinson tension bar apparatus and a static material testing system were utilized to study the stress-strain responses under uniaxial tension loading condition. The experimental results indicate that the tensile behavior of TC21 titanium alloy is dependent on the strain rate and temperature. The values of initial yield stress increase with increasing strain rate and decreasing temperature. The effects of strain rate and temperature on the initial yield behavior are estimated by introducing two sensitivity parameters. The phenomenological-based constitutive model, Johnson-Cook model, is suitably modified to describe the rate-temperature dependent constitutive behavior of TC21 titanium alloy. It is observed that the modified model is in good agreement with the experimental data subjected to the investigated range of strain rates and temperatures.
基金Supported by the National Natural Science Foundation of China(No.20490220)Open Fund of State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,China(No.05-10)+1 种基金Open Fund of Hubei Key Laboratory of Materials Chemistry and Service FailureProgram for New Century Excellent Talents in Universities of China(No.NCET-05-0640)
文摘Polypropylene（PP）/ethylene-octene copolymer（POE） blends were prepared with a twin-screw extruder.Their dynamic mechanical behavior were systematically investigated.The results show that PP/POE blends are heterogeneities with a partial compatible two-phase structure,the glass transition temperature of PP phases in the blends tends to shift towards high temperature with increasing the POE content,and the glass transition temperature of POE phases shifts towards the low temperature with increasing the PP content.The Kerner＇s dispersed phase model and co-continuous phase model can reasonably predict the visco-elasticity of PP/POE blends with different compositions.Additionally,the morphological structure of the blends can be estimated via comparing the predicted DMA behavior with the experimental data.
文摘The Blume-Capel model in the presence of external magnetic field H has been simulated using a cellular automaton algorithm improved from the Creutz cellular automaton in three-dimension lattice. The field critical exponent 5 is estimated using the power law relations and the finite size scaling functions for the magnetization and the susceptibility in the range -0.1≤ h = H/J ≤0. The estimated value of the field critical exponent 5 is in good agreement with the universal value （δ = 5） in three dimensions. The simulations are carried out on a simple cubic lattice under periodic boundary conditions.
