In the recent Smart Home(SH)research work,intelligent service recommendation technique based on behavior recognition,it has been extensively preferred by researchers.However,most current research uses the Semantic rec...In the recent Smart Home(SH)research work,intelligent service recommendation technique based on behavior recognition,it has been extensively preferred by researchers.However,most current research uses the Semantic recognition to construct the user’s basic behavior model.This method is usually restricted by environmental factors,the way these models are built makes it impossible for them to dynamically match the services that might be provided in the user environment.To solve this problem,this paper proposes a Semantic behavior assistance(Semantic behavior assistance,SBA).By joining the semantic model on the intelligent gateway,building an SA model,in this way,a logical Internet networks for smart home is established.At the same time,a behavior assistant method based on SBA model is proposed,among them,the user environment-related entities,sensors,devices,and user-related knowledge models exist in the logical interconnection network of the SH system through the semantic model.In this paper,the data simulation experiment is carried out on the method.The experimental results show that the SBA model is better than the knowledge-based pre-defined model.展开更多
Perovskite BiMnO_3 samples are successfully synthesized by the co-precipitation method at relatively low pressure and moderate temperature.The temperature dependences of resistivity are measured and systematically inv...Perovskite BiMnO_3 samples are successfully synthesized by the co-precipitation method at relatively low pressure and moderate temperature.The temperature dependences of resistivity are measured and systematically investigated.It is shown that the electrical resistivity increases sharply with the decrease of temperature above 210 K and the fitted results demonstrate that the thermally activated conduction model is the dominant conduction mechanism for the electron transport behaviors in this temperature region.A dual conducting mechanism,i.e.,the variable range hopping and thermal activated conduction,is suggested to be responsible for the transport behaviors of BiMnO_3 in the region of 180-200 K.Moreover,the resistivity increases slightly with the decrease of temperature below 180 K and the transport is governed by the variable range hopping mechanism.展开更多
In this paper, stress behavior of shallow tunnels under simultaneous non-uniform surface traction and symmetric gravity loading was studied using a direct boundary element method(BEM). The existing fullplane elastos...In this paper, stress behavior of shallow tunnels under simultaneous non-uniform surface traction and symmetric gravity loading was studied using a direct boundary element method(BEM). The existing fullplane elastostatic fundamental solutions to displacement and stress fields were used and implemented in a developed algorithm. The cross-section of the tunnel was considered in circular, square, and horseshoe shapes and the lateral coefficient of the domain was assumed as unit quantity. Double-node procedure of the BEM was applied at the corners to improve the model including sudden traction changes. The results showed that the method used was a powerful tool for modeling underground openings under various external as well as internal loads. Eccentric loads significantly influenced the stress pattern of the surrounding tunnel. The achievements can be practically used in completing and modifying regulations for stability investigation of shallow tunnels.展开更多
To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents,in this article,three kinds of elastic cushion materials,Portuguese cork board,...To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents,in this article,three kinds of elastic cushion materials,Portuguese cork board,BGL insulation sound insulation foam board,and EPP polypropylene plastic foam board,are applied to the sound insulation of a light frame wood floor structure of the same bedroom and compared to the ordinary floor.This study uses the transfer function method and transient excitation method to measure the sound insulation,damping ratio,and elastic modulus of materials,as well as the sound insulation of the floor under the jumping excitation method of daily behavior.Through comparative analysis,the results and factors of improving the sound insulation performance of the floor are obtained,according to which three types of elastic cushion materials and the floor covering composed of them have higher vibration and noise reduction performance.Among them,the overall sound insulation performance of BGL board floor is the highest,followed by EPP board and cork board floor,and ordinary OSB floor is the lowest.Under the jumping excitation method,three floating floors can improve the impact sound insulation performance of the middle and low-frequency bands.展开更多
The high-temperature creep behavior of asphalt mixture was investigated based on micromechanical modeling and virtual test by using three-dimensional discrete element method(DEM). A user-defined micromechanical mode...The high-temperature creep behavior of asphalt mixture was investigated based on micromechanical modeling and virtual test by using three-dimensional discrete element method(DEM). A user-defined micromechanical model of asphalt mixture was established after analyzing the irregular shape and gradation of coarse aggregates, the viscoelastic property of asphalt mastic, and the random distribution of air voids within the asphalt mixture. Virtual uniaxial static creep test at 60 ℃ was conducted by using Particle Flow Code in three dimensions(PFC3D) and was validated by laboratory test. Based on virtual creep test, the micromechanical characteristics between aggregates, within asphalt mastic, and between aggregate and asphalt mastic were analyzed for the asphalt mixture. It is proved that the virtual test based on the micromechanical model can efficiently predict the creep deformation of asphalt mixture. And the high-temperature behavior of asphalt mixture was characterized from micromechanical perspective.展开更多
Anisotropy of the strength and deformation behaviors of fractured rock masses is a crucial issue for design and stability assessments of rock engineering structures, due mainly to the non-uniform and non- regular geom...Anisotropy of the strength and deformation behaviors of fractured rock masses is a crucial issue for design and stability assessments of rock engineering structures, due mainly to the non-uniform and non- regular geometries of the fracture systems. However, no adequate efforts have been made to study this issue due to the current practical impossibility of laboratory tests with samples of large volumes con- taining many fractures, and the difficulty for controlling reliable initial and boundary conditions for large-scale in situ tests. Therefore, a reliable numerical predicting approach for evaluating anisotropy of fractured rock masses is needed. The objective of this study is to systematically investigate anisotropy of strength and deformability of fractured rocks, which has not been conducted in the past, using a nu- merical modeling method. A series of realistic two-dimensional (2D) discrete fracture network (DFN) models were established based on site investigation data, which were then loaded in different directions, using the code UDEC of discrete element method (DEM), with changing confining pressures. Numerical results show that strength envelopes and elastic deformability parameters of tested numerical models are significantly anisotropic, and vary with changing axial loading and confining pressures. The results indicate that for design and safety assessments of rock engineering projects, the directional variations of strength and deformability of the fractured rock mass concerned must be treated properly with respect to the directions of in situ stresses. Traditional practice for simply positioning axial orientation of tunnels in association with principal stress directions only may not be adequate for safety requirements. Outstanding issues of the present study and su^zestions for future study are also oresented.展开更多
The household drill is named 90 Degree, designed by Industrial Design Pilot Program Center(Hereinafter referred to as IDPPC) of Luxun Academy of Fine Arts(Hereinafter referred to as LAFA), which is the only national p...The household drill is named 90 Degree, designed by Industrial Design Pilot Program Center(Hereinafter referred to as IDPPC) of Luxun Academy of Fine Arts(Hereinafter referred to as LAFA), which is the only national pilot program center in Chinese industrial design field. 90 Degree is designed for home environment, it helps inexperience users, such as women and the elderly, complete the operation easily, and it makes sure that safe operation and assistance users solve the precise punching, location, storage trash and other operations. According to research among users who can understand or manipulate a drill, the designers find problems of users from the user central perspective, and then they integrate product innovative design methods to propose solutions. When the designers intend to design 90 Degree, they attempt using the user behavior record and analysis system, and start ergonomics study in subjects by double hands operation analysis, using gesture analysis, details of work analysis, time and motion study, etc; meanwhile taking advantages of user experience analysis, behavior intention analysis to do user subjective perceptual evaluation. The functions, structure, shape, color, material, details of 90 Degree should be consistent with the standard of usability evaluation. There are two characteristics in 90 Degree, the first one is a transparent cover installed in front of the drill, which can collect the dust, rubbish when drilling and keep the work environment clean. So it is applicable for households. When the transparent cover of the drill is removed, it also can be used as a normal hand drill; the second one is the shape of 90 Degree makes it and the operating surface fitting together, thus enhancing the stability in operation, so it is best for inexperienced users. When 90 Degree contacts with the operating surface, it can emit the laser ray which helps the user to punch accurately, and make array punch more easily. After obtaining the data, charts, creating Shadow observation by the designers, they make a comprehensive evaluation on research results; verification advantages of 90 Degree meet the requirement of usability, reducing operating failure rate; and increasing safety factors. 90 Degree, in 2011, wined German Red Dot Design Award, which had become a representative excellent design example to resolve several drilling difficulties. The designers introduce ergonomics theory into design practice, and use scientific program and methods to evaluate the products which is useful to the development and promotion of products.展开更多
In this paper we improve the two versions of the two-sided projected quasi-Newton method-onewas proposed by Nocedal & Overton in [1] and the other was discussed in our previous paper, byintroducing three different...In this paper we improve the two versions of the two-sided projected quasi-Newton method-onewas proposed by Nocedal & Overton in [1] and the other was discussed in our previous paper, byintroducing three different merit functions to make inexact one-dimensional searches. It is shown that these improved quasi-Newton algorithms have gained global convergence propertywhich is not possessed by the original two algorithms.展开更多
Behavior affects an individual's life in all aspects,e.g.,enhancing fitness,leveraging predation risk,and reducing competition with conspecifics.However,the sequential distribution of behaviors received less atten...Behavior affects an individual's life in all aspects,e.g.,enhancing fitness,leveraging predation risk,and reducing competition with conspecifics.However,the sequential distribution of behaviors received less attention and is unclear what the function of displacement behavior is.Displacement activities can be found in vertebrate species but there is no formal method to determine whether a behavior is expressed as a displaced or normal activity.Analyzing the sequential distributions of behaviors in a natural setting may allow researchers to identify unexpected distributions as a possible signature of displacement activities.In this study,we used a behavior random permutation model to detect the presence of a displacement activity in the Tibetan antelope Pantholops hodgsonii and the Tibetan gazelle Procapra picticaudata.The results showed that grooming in both ungulates tended to be accompanied with vigilance,and the frequency of grooming after vigilance was significantly higher than before vigilance.A significant positive correlation between the scan rate and grooming rate in the 2 ungulates was obtained.We suggest that grooming could sometimes be expressed as a displacement activity in ungulates.In addition to providing a general method for further research on displacement activities in a variety of animal species,this study sheds light on the importance of a spectral analysis of sequential distribution of animal behaviors.Behavior random permutation models can be used to explore the relevance between any 2 behaviors in a specific sequence,especially to identify a myriad of unexpected behaviors relative to their normal context of occurrence.展开更多
基金supported by the National Natural Science Foundation of China(61772196,61472136)the Hunan Provincial Focus Social Science Fund(2016ZDB006)+2 种基金Hunan Provincial Social Science Achievement Review Committee results in appraisal identification project(Xiang social assessment 2016JD05)Key Project of Hunan Provincial Social Science Achievement Review Committee(XSP 19ZD1005)financial support provided by the Key Laboratory of Hunan Province for New Retail Virtual Reality Technology(2017TP1026)。
文摘In the recent Smart Home(SH)research work,intelligent service recommendation technique based on behavior recognition,it has been extensively preferred by researchers.However,most current research uses the Semantic recognition to construct the user’s basic behavior model.This method is usually restricted by environmental factors,the way these models are built makes it impossible for them to dynamically match the services that might be provided in the user environment.To solve this problem,this paper proposes a Semantic behavior assistance(Semantic behavior assistance,SBA).By joining the semantic model on the intelligent gateway,building an SA model,in this way,a logical Internet networks for smart home is established.At the same time,a behavior assistant method based on SBA model is proposed,among them,the user environment-related entities,sensors,devices,and user-related knowledge models exist in the logical interconnection network of the SH system through the semantic model.In this paper,the data simulation experiment is carried out on the method.The experimental results show that the SBA model is better than the knowledge-based pre-defined model.
基金Supported by the Key Research Project of Shaanxi University of Science and Technology under Grant Nos 2016GBJ-12 and2016BJ-59
文摘Perovskite BiMnO_3 samples are successfully synthesized by the co-precipitation method at relatively low pressure and moderate temperature.The temperature dependences of resistivity are measured and systematically investigated.It is shown that the electrical resistivity increases sharply with the decrease of temperature above 210 K and the fitted results demonstrate that the thermally activated conduction model is the dominant conduction mechanism for the electron transport behaviors in this temperature region.A dual conducting mechanism,i.e.,the variable range hopping and thermal activated conduction,is suggested to be responsible for the transport behaviors of BiMnO_3 in the region of 180-200 K.Moreover,the resistivity increases slightly with the decrease of temperature below 180 K and the transport is governed by the variable range hopping mechanism.
文摘In this paper, stress behavior of shallow tunnels under simultaneous non-uniform surface traction and symmetric gravity loading was studied using a direct boundary element method(BEM). The existing fullplane elastostatic fundamental solutions to displacement and stress fields were used and implemented in a developed algorithm. The cross-section of the tunnel was considered in circular, square, and horseshoe shapes and the lateral coefficient of the domain was assumed as unit quantity. Double-node procedure of the BEM was applied at the corners to improve the model including sudden traction changes. The results showed that the method used was a powerful tool for modeling underground openings under various external as well as internal loads. Eccentric loads significantly influenced the stress pattern of the surrounding tunnel. The achievements can be practically used in completing and modifying regulations for stability investigation of shallow tunnels.
基金This study was funded by Co-Innovation Center of Efficient Processing and Utilization of Forest Resources(Nanjing Forestry University,Nanjing,210037,China).
文摘To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents,in this article,three kinds of elastic cushion materials,Portuguese cork board,BGL insulation sound insulation foam board,and EPP polypropylene plastic foam board,are applied to the sound insulation of a light frame wood floor structure of the same bedroom and compared to the ordinary floor.This study uses the transfer function method and transient excitation method to measure the sound insulation,damping ratio,and elastic modulus of materials,as well as the sound insulation of the floor under the jumping excitation method of daily behavior.Through comparative analysis,the results and factors of improving the sound insulation performance of the floor are obtained,according to which three types of elastic cushion materials and the floor covering composed of them have higher vibration and noise reduction performance.Among them,the overall sound insulation performance of BGL board floor is the highest,followed by EPP board and cork board floor,and ordinary OSB floor is the lowest.Under the jumping excitation method,three floating floors can improve the impact sound insulation performance of the middle and low-frequency bands.
基金Funded by the National Natural Science Foundation of China(No.51378006)the Huoyingdong Foundation of China(No.141076)+1 种基金the Fundamental Research Funds for the Central Universities(No.2242015R30027)the Natural Science Foundation of Jiangsu Province(BK20161421 and BK20140109)
文摘The high-temperature creep behavior of asphalt mixture was investigated based on micromechanical modeling and virtual test by using three-dimensional discrete element method(DEM). A user-defined micromechanical model of asphalt mixture was established after analyzing the irregular shape and gradation of coarse aggregates, the viscoelastic property of asphalt mastic, and the random distribution of air voids within the asphalt mixture. Virtual uniaxial static creep test at 60 ℃ was conducted by using Particle Flow Code in three dimensions(PFC3D) and was validated by laboratory test. Based on virtual creep test, the micromechanical characteristics between aggregates, within asphalt mastic, and between aggregate and asphalt mastic were analyzed for the asphalt mixture. It is proved that the virtual test based on the micromechanical model can efficiently predict the creep deformation of asphalt mixture. And the high-temperature behavior of asphalt mixture was characterized from micromechanical perspective.
文摘Anisotropy of the strength and deformation behaviors of fractured rock masses is a crucial issue for design and stability assessments of rock engineering structures, due mainly to the non-uniform and non- regular geometries of the fracture systems. However, no adequate efforts have been made to study this issue due to the current practical impossibility of laboratory tests with samples of large volumes con- taining many fractures, and the difficulty for controlling reliable initial and boundary conditions for large-scale in situ tests. Therefore, a reliable numerical predicting approach for evaluating anisotropy of fractured rock masses is needed. The objective of this study is to systematically investigate anisotropy of strength and deformability of fractured rocks, which has not been conducted in the past, using a nu- merical modeling method. A series of realistic two-dimensional (2D) discrete fracture network (DFN) models were established based on site investigation data, which were then loaded in different directions, using the code UDEC of discrete element method (DEM), with changing confining pressures. Numerical results show that strength envelopes and elastic deformability parameters of tested numerical models are significantly anisotropic, and vary with changing axial loading and confining pressures. The results indicate that for design and safety assessments of rock engineering projects, the directional variations of strength and deformability of the fractured rock mass concerned must be treated properly with respect to the directions of in situ stresses. Traditional practice for simply positioning axial orientation of tunnels in association with principal stress directions only may not be adequate for safety requirements. Outstanding issues of the present study and su^zestions for future study are also oresented.
文摘The household drill is named 90 Degree, designed by Industrial Design Pilot Program Center(Hereinafter referred to as IDPPC) of Luxun Academy of Fine Arts(Hereinafter referred to as LAFA), which is the only national pilot program center in Chinese industrial design field. 90 Degree is designed for home environment, it helps inexperience users, such as women and the elderly, complete the operation easily, and it makes sure that safe operation and assistance users solve the precise punching, location, storage trash and other operations. According to research among users who can understand or manipulate a drill, the designers find problems of users from the user central perspective, and then they integrate product innovative design methods to propose solutions. When the designers intend to design 90 Degree, they attempt using the user behavior record and analysis system, and start ergonomics study in subjects by double hands operation analysis, using gesture analysis, details of work analysis, time and motion study, etc; meanwhile taking advantages of user experience analysis, behavior intention analysis to do user subjective perceptual evaluation. The functions, structure, shape, color, material, details of 90 Degree should be consistent with the standard of usability evaluation. There are two characteristics in 90 Degree, the first one is a transparent cover installed in front of the drill, which can collect the dust, rubbish when drilling and keep the work environment clean. So it is applicable for households. When the transparent cover of the drill is removed, it also can be used as a normal hand drill; the second one is the shape of 90 Degree makes it and the operating surface fitting together, thus enhancing the stability in operation, so it is best for inexperienced users. When 90 Degree contacts with the operating surface, it can emit the laser ray which helps the user to punch accurately, and make array punch more easily. After obtaining the data, charts, creating Shadow observation by the designers, they make a comprehensive evaluation on research results; verification advantages of 90 Degree meet the requirement of usability, reducing operating failure rate; and increasing safety factors. 90 Degree, in 2011, wined German Red Dot Design Award, which had become a representative excellent design example to resolve several drilling difficulties. The designers introduce ergonomics theory into design practice, and use scientific program and methods to evaluate the products which is useful to the development and promotion of products.
基金This research was supported in part by tbe National Natural Science Foundation of China
文摘In this paper we improve the two versions of the two-sided projected quasi-Newton method-onewas proposed by Nocedal & Overton in [1] and the other was discussed in our previous paper, byintroducing three different merit functions to make inexact one-dimensional searches. It is shown that these improved quasi-Newton algorithms have gained global convergence propertywhich is not possessed by the original two algorithms.
基金Authors thank the Tibet Major Science and Technology Project(XZ201901-GA-06)National Natural Science Foundation of China(grant nos.31360141 and 31772470)West Light Foundation of Chinese Academy of Sciences(2015)in supporting the study financially.
文摘Behavior affects an individual's life in all aspects,e.g.,enhancing fitness,leveraging predation risk,and reducing competition with conspecifics.However,the sequential distribution of behaviors received less attention and is unclear what the function of displacement behavior is.Displacement activities can be found in vertebrate species but there is no formal method to determine whether a behavior is expressed as a displaced or normal activity.Analyzing the sequential distributions of behaviors in a natural setting may allow researchers to identify unexpected distributions as a possible signature of displacement activities.In this study,we used a behavior random permutation model to detect the presence of a displacement activity in the Tibetan antelope Pantholops hodgsonii and the Tibetan gazelle Procapra picticaudata.The results showed that grooming in both ungulates tended to be accompanied with vigilance,and the frequency of grooming after vigilance was significantly higher than before vigilance.A significant positive correlation between the scan rate and grooming rate in the 2 ungulates was obtained.We suggest that grooming could sometimes be expressed as a displacement activity in ungulates.In addition to providing a general method for further research on displacement activities in a variety of animal species,this study sheds light on the importance of a spectral analysis of sequential distribution of animal behaviors.Behavior random permutation models can be used to explore the relevance between any 2 behaviors in a specific sequence,especially to identify a myriad of unexpected behaviors relative to their normal context of occurrence.