Analytical modeling of sandwich beam for piezoelectric bender elements

Piezoelectric bender elements are widely used as electromechanical sensors and actuators, An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory （FSDT）, which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers, and corrects the effect of transverse shear strain on the electric displacement integration. Free vibration analysis of simplysupported bender elements was carried out and the numerical results showed that, solutions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions, which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.

Investigation on the properties of compacted silty clay subjected to electro-osmosis using bender element

The moisture content of subgrade soil in seasonally frozen regions is often higher than its optimum value,leading to a decline in mechanical properties and a reduction in subgrade bearing capacity.Electro-osmosis has shown promise as a technology for controlling subgrade moisture,but significant heterogeneity has also been observed in treated soil.This study investigates the impact of electro-osmosis on soil stiffness through a series of bender element tests of compacted clay.The effects of dry density and supply voltage on the performance of electroosmosis treatment and the layered structure and anisotropy of the soil were analyzed.The results show that electro-osmosis treatment increased the shear wave velocity of the soil by 140% compared to untreated saturated soil and by 70% compared to soil with optimum water content.It has also been found that layered compaction of soil resulted in a layered structure,with electro-osmosis having a more prominent impact on soil near the cathode,resulting in a more pronounced layered structure.Besides,electro-osmosis was found to enhance soil anisotropy,particularly near the anode.Increasing the dry density and voltage levels can help improve soil uniformity.These findings provide insights into the potential use of electro-osmosis in improving soil stiffness,which could benefit various engineering applications.

Monitoring lime and cement improvement using spectral induced polarization and bender element techniques

Spectral induced polarization(SIP)and bender element(BE)techniques show a high sensitivity to particle size,particle distribution and content of generated hydration products,which essentially govern the efficiency of ground improvement.In this context,both SIP and BE were integrated on a column setup to monitor the processes of lime and cement stabilization.A 5 mmol/L Na2CO3 solution was injected into the sand-lime mixture to produce CaCO3 precipitation,while deionized water was injected into the sandcement mixture to induce the hydration of cement.The average diameters of the precipitated particles or clusters were calculated from the relaxation time,which was a significant parameter of SIP signals,via the Schwarz equation.Two pairs of BE were used to demonstrate the heterogeneity of the product precipitation,which was probably caused by the location of the inflow and outflow on the SIP-BE column.SIP and BE showed the capability of nondestructively monitoring the spatiotemporal chemical evolution processes,which could be helpful for engineering applications.

A note on influence of stress anisotropy on the Poisson's ratio of dry sand

In this study, extender and bender element tests were conducted investigating the small-strain Poisson’s ratio of variable sands, with a focus on the effect of stress anisotropy in order to quantify the sensitivity of Poisson’s ratio to the applied deviatoric stress. Four different uniform sands were tested, including a biogenic sand, a crushed rock and two natural sands, covering a wide range of particle shapes. From these sands, eleven samples were prepared in the laboratory and were tested under variable stress paths,maintaining a constant mean effective pressure while increasing the deviatoric compressive load. Under the application of these given stress paths, the data analysis indicated that the sensitivity of Poisson’s ratio to the stress ratio was more pronounced for sands with irregularly shaped particles in comparison to sands with fairly rounded and spherical grains. For sands with very irregularly shaped particles, the increase of Poisson’s ratio from the isotropic to the anisotropic stress state reached 50%, while this increase for natural sands with fairly rounded particles was in the order of 20%.

An improved specimen preparation method for marine shallow gasbearing sand sediments and its validations

Instabilities of shallow gas-charged seabed are potential geological hazards in ocean engineering.In practice,the conventional field sampling techniques failed to obtain undisturbed gas-bearing sediments from the seabed for laboratory mechanical testing because of sensitive gas exsolution and escape from sediments.However,preparation of representative remoulded gas-charged specimens is a challenging issue,because it is rather difficult to quantitatively control the gas content and obtain uniform distribution of gas bubbles within the specimen.Given the above problems,this work proposes a reliable approach to reconstitute the high-saturation specimen of gas-charged sediments in the laboratory by an improved multifunction integrated triaxial apparatus(MITA).This apparatus is developed based on an advanced stress path triaxial system by introducing a temperature-controlled system and a wavemonitoring system.The temperature-controlled system is used to accurately mimic the in situ environments of sediments in the seabed.The wave-monitoring system is utilized to identify exsolution point of free gas and examine the disturbance of gas to specimens during gas exsolution.The detailed procedure of gassy specimen preparation is introduced.Then,the quality of prepared specimens using our improved apparatus is validated by the high-resolution micro-X-ray computed tomography(mCT)scanning test,from which bubble occurrence and size distribution within the gassy sand specimen can be obtained;and preliminary mechanical tests on gassy sand specimens with various initial saturation degrees are performed.The proposed specimen preparation procedure succeeds in proving the postulated occurrence state of gas bubbles in coarse-grained sediments and accurately controlling the gas content.

Pre-Failure Behavior of Deep-Situated Osaka Clay

Great interest has been aroused on deeply-situated Osaka clay since Kobe Earthquake in 1994. In this paper is presented the analysis on the results of a series of lab tests on Osaka clay situated from 100 m to 1500 m under the ground. The wave velocity method, bender element method, LDT and the formula derived by the authors are used, focus is put on the pre-failure mechanical behavior of the clay. The analysis shows that, (i) pore-pressure coefficient B is less than 1.0, (ii) the relationship between shear modulus and Poisson's ratio is not in agreement with that reported before, (iii) the modulus measured with LDT is still less than that measured with bender element method, and (iv) there are two threshold strains, within which the clay can be considered as elastic, and both of them are larger than that reported before.