A Study on 3D FE Simulation Method of NC Bending Process of Thin-walled Tube

The numerical control (NC) precision bending process of thin-walled tube is on e of advanced plastic forming processes with high efficiency, forming precision, strength/weight ratio and low cost, thus it is playing more and more important role in manufacturing parts in aerospace and automobile industries. However, the determination of parameters crucial to make sure tube parts qualified is heavil y experience-based and involves repeated trial-and-errors in practice, which makes the production efficiency reduce drastically and does not fulfill the deve lopment of high technology. With quick development of computer technology and gr adual perfect of plastic forming theory, computer numerical simulation based on finite element method (FEM) has become one of important tools of researching and developing plastic forming technology. Development trend of NC precision bendin g process of tube is simulating its forming process by FEM. Because NC tube bend ing is of 3D nature, it is of great importance to analyze the forming mechanism and find out the influence law of forming parameters on forming process in the N C precision bending process of thin-walled tube quantitatively by 3D FE simulat ion. Based on the rigid-plastic finite element method (FEM) principle, a 3-dimens ional (3D) rigid-plastic FE simulation system named TBS -3D (tube bending simu lation by 3D FEM) for the NC bending process of thin-walled tube has been devel oped, a reasonable FEM model has been established. By use of this FEM simulation system, a NC bending process of thin-walled has been simulated. And deformed m eshes under different bending stages, stress distribution along bending directio n, relationship between maximal wall thickness changing ratio and bending angle have been obtained. And then some forming laws of NC tube bending obtained are a s follows: (1) NC bending process make tube elongate to some extent; (2) Charact eristic of stress distribution is that the outer area is undergoing tensile stre ss, the inner area is undergoing compression stress, and stress neutral layer mo ves close to the inner area, which is in good accordance with the practice; (3) Maximal wall thinning ratio in the outer tensile area changes only a little with increase of bending angle, and maximal wall thickening ratio in the inner compr ession area increases linearly with bending angle. The above results show that 3 D FE simulation is an important and valid tool of analyzing NC bending process o f tube, this research is beneficial for the practical tube bending process, and it may serve as a significant guide to the practice of the relevant processes.

Intelligent Construction Technology of Hyperbolic Curtain Wall

Taking the hyperbolic glass curtain wall project of the Wuhan Jinyinhu Commercial Plaza as an example,the characteristics of different curved glass forming technologies were analyzed in this paper.Combined with the actual engineering situation,the curved steel process is selected to produce the hyperbolic glass curtain wall,and the application of BIM technology in the quality control of hyperbolic glass curtain wall in the production process was analyzed,and the effects of heating condition,bending time,cooling condition,and bending tempering error in the manufacturing accuracy of the curved glass curtain wall were studied,in hope that this project can provide practical reference for similar curtain wall design construction in the future.

Determination of continuous constitutive relationship of weld zone of high-strength steel rectangular welded tube

For QSTE700 high-strength steel rectangular welded tube,the mechanical properties of the weld zone vary with the distancefrom the centerline of the weld.Therefore,the accurate description of constitutive relationship of the weld zone is of greatsignificance for the study of formability of QSTE700 rectangular welded tube.Firstly,the mechanical properties of parentand mixed specimens containing weld zone and parent zone were obtained by uniaxial tensile test.And based on the micro-hardness test,the width and the microhardness distribution of the weld zone were determined.Secondly,by subdividingthe weld zone into several small areas,and combining with the rule of mixtures and nanoindentation test,the continuous functional relationships of strength coefficient K,hardening coeffecient n and elastic modulus E were obtained,and then,the continuous constitutive relationship of QSTE700 rectangular welded tube was established.Finally,the validity and reliability of the continuous constitutive relationship of welded tube were verified by nanoindentation fest and rotary drawbending of rectangular welded tubc.Besides,it was found that the finite element model of rotary draw bending of QSTE700 rectangular welded tube established by using the continuous constitutive relationship can well simulate the cross sectiondeformation and wall thickness variation.