A NEW SYNCHRONOUS DIGITAL HIERARCHICAL BI-DIRECTIONAL RING CAPACITY DESIGN ALGORITHM BASED ON THE SHORTEST-ROUTE TRAFFIC MATRIX

In this paper, the concept of the Shortest-Route Traffic Matrix(SRTM) was first presented, and the generalized formula for computing ring capacity requirement in use of SRTM is given. Then, a new capacity design algorithm which is based on SRTM was presented for Synchronous Digital Hierarchical(SDH) Bi-directional Self-Healing Ring (BSHR). The algorithm simulation results demonstrate that this algorithm is very efficient for SDH BSHR capacity design and can make less project investment and make high utilization of lines and equipment. By means of the algorithm in this paper, capacity optimization assignment for SDH Hierarchical Self-Healing Ring (HSHR) and for ATM Virtual Path (VP)-based Self-Healing Ring (SHR) is also discussed.

Numerical simulation and experimental verification of a novel double-layered split die for high-pressure apparatus used for synthesizing superhard materials

Based on the principles of massive support and lateral support, a novel double-layered split die(DLSD) for high-pressure apparatus was designed to achieve a higher pressure-bearing capacity and larger sample cavity. The stress distributions of the DLSDs with different numbers of divided blocks were investigated by the finite element method and compared with the stress distributions of the conventional belt-type die(BTD). The results show that the cylinders and first-layer supporting rings of the DLSDs have dramatically smaller stresses than those of the BTD. In addition, increasing the number of divided blocks from 4 to 10 gradually increases the stress of the cylinder but has minimal influence on the stress of the supporting rings. The pressure-bearing capacities of the DLSDs with different numbers of divided blocks, especially with fewer blocks, are all remarkably higher than the pressure-bearing capacity of the BTD. The contrast experiments were also carried out to verify the simulated results. It is concluded that the pressure-bearing capacities of the DLSDs with 4 and 8 divided blocks are 1.58 and 1.45 times greater than that of the BTD. This work is rewarding for the commercial synthesis of high-quality, large-sized superhard materials using a double-layered split high-pressure die.

“Extreme utilization” theory and practice in gas storages with complex geological conditions

Based on more than 20-year operation of gas storages with complex geological conditions and a series of research findings, the pressure-bearing dynamics mechanism of geological body is revealed. With the discovery of gas-water flowing law of multi-cycle relative permeability hysteresis and differential utilization in zones, the extreme utilization theory targeting at the maximum amount of stored gas, maximum injection-production capacity and maximum efficiency in space utilization is proposed to support the three-in-one evaluation method of the maximum pressure-bearing capacity of geological body, maximum well production capacity and maximum peak shaving capacity of storage space. This study realizes the full potential of gas storage(storage capacity) at maximum pressure, maximum formation-wellbore coordinate production, optimum well spacing density match with finite-time unsteady flow, and peaking shaving capacity at minimum pressure, achieving perfect balance between security and capacity. Operation in gas storages, such as Hutubi in Xinjiang, Xiangguosi in Xinan, and Shuang6 in Liaohe, proves that extreme utilization theory has promoted high quality development of gas storages in China.