A detailed and accurate inventory map of landslides is crucial for quantitative hazard assessment and land planning.Traditional methods relying on change detection and object-oriented approaches have been criticized f...A detailed and accurate inventory map of landslides is crucial for quantitative hazard assessment and land planning.Traditional methods relying on change detection and object-oriented approaches have been criticized for their dependence on expert knowledge and subjective factors.Recent advancements in highresolution satellite imagery,coupled with the rapid development of artificial intelligence,particularly datadriven deep learning algorithms(DL)such as convolutional neural networks(CNN),have provided rich feature indicators for landslide mapping,overcoming previous limitations.In this review paper,77representative DL-based landslide detection methods applied in various environments over the past seven years were examined.This study analyzed the structures of different DL networks,discussed five main application scenarios,and assessed both the advancements and limitations of DL in geological hazard analysis.The results indicated that the increasing number of articles per year reflects growing interest in landslide mapping by artificial intelligence,with U-Net-based structures gaining prominence due to their flexibility in feature extraction and generalization.Finally,we explored the hindrances of DL in landslide hazard research based on the above research content.Challenges such as black-box operations and sample dependence persist,warranting further theoretical research and future application of DL in landslide detection.展开更多
Characterized by lithological diversity and rich mineral resources, Benshangul-Gumuz National Regional State located in Asosa Zones, Western Ethiopia has been investigated for geological mapping and morpho-structural ...Characterized by lithological diversity and rich mineral resources, Benshangul-Gumuz National Regional State located in Asosa Zones, Western Ethiopia has been investigated for geological mapping and morpho-structural lineaments extraction using PALSAR (Phased Array type L-band Synthetic Aperture Radar ) Fine Beam Single (FBS) L-HH polarization and Landsat-5 TM (Thematic Mapper ) datasets. These data were preprocessed to retrieve ground surface reflectance and backscatter coefficients. To overcome the geometry acquisition between the two sensors, they were geometrically and topographically rectified using ASTER-V2 DEM. Intensity-Hue-Saturation, directional filters and automatic lineaments extraction were applied on the datasets for lithological units’ discrimination and structural delimitation for potential mineral exploration. The obtained results showed good relationship among the topographic morphology, rock-substrate, structural variations properties, and drainage network. The spectral variations were easily associated with lithological units. Likewise, the morpho-structural information highlighted in the PALSAR image was visible without altering the radiometric integrity of the details in TM bands through the fusion process. Moreover, predominant lineaments directions trending NE-SW, NS, and NW-SE were identified. Results of this study highlighted the importance of the PALSAR FBS L-HH mode and TM data fusion to enhance geological features and lithological units for mineral exploration particularly in tropical zones.展开更多
Hyperspectral remote sensing is now a frontier of the remote sensing technology. Airborne hyperspectral remote sensing data have hundreds of narrow bands to obtain complete and continuous ground-object spectra. Theref...Hyperspectral remote sensing is now a frontier of the remote sensing technology. Airborne hyperspectral remote sensing data have hundreds of narrow bands to obtain complete and continuous ground-object spectra. Therefore, they can be effectively used to identify these grotmd objects which are difficult to discriminate by using wide-band data, and show much promise in geological survey. At the height of 1500 m, have 36 bands in visible to the CASI hyperspectral data near-infrared spectral range, with a spectral resolution of 19 nm and a space resolution of 0.9 m. The SASI data have 101 bands in the shortwave infrared spectral range, with a spectral resolution of 15 nm and a space resolution of 2.25 m. In 2010, China Geological Survey deployed an airborne CASI/SASI hyperspectral measurement project, and selected the Liuyuan and Fangshankou areas in the Beishan metallogenic belt of Gansu Province, and the Nachitai area of East Kunlun metallogenic belt in Qinghai Province to conduct geological survey. The work period of this project was three years.展开更多
Mineral potential assessment at the Earth’s surface has been an important research for geoscientists around the world in the past five decades. The fundamental aspects of mineral assessment at different scales can be...Mineral potential assessment at the Earth’s surface has been an important research for geoscientists around the world in the past five decades. The fundamental aspects of mineral assessment at different scales can be associated with the following tasks, e.g., mineral potential mapping and estimation of mineral resources. This paper summarized the history and development in terms of theories, methods technologies and software platforms for quantitative assessment of mineral resources in China, e.g. comprehensive information methodology, geological anomaly, three-component quantitative prediction method, 5P orefinding area, integrated information assessment method, nonlinear process modeling and fractals, three dimensional mineral potential mapping, etc. At last, to discuss the future of quantitative mineral assessment in an era of big data including platform for 3D visualization, analysis and sharing, new methods and protocols for data cleaning, information enhancement, information integration, and uncertainties and multiple explanations of multi-information.展开更多
The basis of accurate mineral resource estimates is to have a geological model which replicates the nature and style of the orebody. Key inputs into the generation of a good geological model are the sample data and ma...The basis of accurate mineral resource estimates is to have a geological model which replicates the nature and style of the orebody. Key inputs into the generation of a good geological model are the sample data and mapping information. The Obuasi Mine sample data with a lot of legacy issues were subjected to a robust validation process and integrated with mapping information to generate an accurate geological orebody model for mineral resource estimation in Block 8 Lower. Validation of the sample data focused on replacing missing collar coordinates, missing assays, and correcting magnetic declination that was used to convert the downhole surveys from true to magnetic, fix missing lithology and finally assign confidence numbers to all the sample data. The missing coordinates which were replaced ensured that the sample data plotted at their correct location in space as intended from the planning stage. Magnetic declination data, which was maintained constant throughout all the years even though it changes every year, was also corrected in the validation project. The corrected magnetic declination ensured that the drillholes were plotted on their accurate trajectory as per the planned azimuth and also reflected the true position of the intercepted mineralized fissure(s) which was previously not the case and marked a major blot in the modelling of the Obuasi orebody. The incorporation of mapped data with the validated sample data in the wireframes resulted in a better interpretation of the orebody. The updated mineral resource generated by domaining quartz from the sulphides and compared with the old resource showed that the sulphide tonnes in the old resource estimates were overestimated by 1% and the grade overestimated by 8.5%.展开更多
Mineral prospectivity mapping(MPM)is designed to reduce the exploration search space by combining and analyzing geological prospecting big data.Such geological big data are too large and complex for humans to effectiv...Mineral prospectivity mapping(MPM)is designed to reduce the exploration search space by combining and analyzing geological prospecting big data.Such geological big data are too large and complex for humans to effectively handle and interpret.Artificial intelligence(AI)algorithms,which are powerful tools for mining nonlinear mineralization patterns in big data obtained from mineral exploration,have demonstrated excellent performance in MPM.However,AI-driven MPM faces several challenges,including difficult interpretability,poor generalizability,and physical inconsistencies.In this study,based on previous studies,we devised a novel workflow that aims to constructing more transparent and explainable artificial intelligence(XAI)models for MPM by embedding domain knowledge throughout the AI-driven MPM,from input data to model design and model output.This newly proposed approach provides strong geological and conceptual leads that guide the entire AI-driven MPM model training process,thereby improving model interpretability and performance.Overall,the development of XAI models for MPM is capable of embedding prior and expert knowledge throughout the modeling process,presenting a valuable and promising area for future research designed to improve MPM.展开更多
Today’s era of big data is witnessing a gradual increase in the amount of data,more correlations between data,as well as growth in their spatial dimension.Conventional linear statistical models applied to mineral pro...Today’s era of big data is witnessing a gradual increase in the amount of data,more correlations between data,as well as growth in their spatial dimension.Conventional linear statistical models applied to mineral prospectivity mapping(MPM)perform poorly because of the random and nonlinear nature of metallogenic processes.To overcome this performance degradation,deep learning models have been introduced in 3 D MPM.In this study,taking the Huayuan sedimentary Mn deposit in Hunan Province as an example,we construct a 3 D digital model of this deposit based on the prospectivity model of the study area.In this approach,3 D predictor layers are converted from the conceptual model and employed in a 3 D convolutional neural network(3 D CNN).The characteristics of the spatial distribution are extracted by the 3 D CNN.Subsequently,we divide the 22 extracted ore-controlling variables into six groups for contrast experiments based on various combinations and further apply the 3 D CNN model and weight of evidence(WofE)method on each group.The predictive model is trained on the basis of the coupling correlation between the spatial distributions of the variables and the underground occurrence space of the Mn orebodies,and the correlation between different ore-controlling factors.The analysis of 12 factors indicates that the 3 D CNN model performs well in the 3 D MPM,achieving a promising accuracy of up to 100%and a loss value below 0.001.A comparison shows that the 3 D CNN model outperforms the WofE model in terms of predictive evaluation indexes,namely the success rate and ore-controlling rate.In particular,the 1–12 ore-controlling factors selected in experiment 5 provide a significantly better prediction effect than the other factors.Consequently,we conclude that the Mn deposit in the study area is not only related to the stratum and interlaminar anomalous bodies but also to the spatial distribution of the faults.The experimental results confirm that the proposed 3 D CNN is promising for 3 D MPM as it eliminates the interference factors.展开更多
基金supported by the National Key Research and Development Program of China(2021YFB3901205)the National Institute of Natural Hazards,Ministry of Emergency Management of China(2023-JBKY-57)。
文摘A detailed and accurate inventory map of landslides is crucial for quantitative hazard assessment and land planning.Traditional methods relying on change detection and object-oriented approaches have been criticized for their dependence on expert knowledge and subjective factors.Recent advancements in highresolution satellite imagery,coupled with the rapid development of artificial intelligence,particularly datadriven deep learning algorithms(DL)such as convolutional neural networks(CNN),have provided rich feature indicators for landslide mapping,overcoming previous limitations.In this review paper,77representative DL-based landslide detection methods applied in various environments over the past seven years were examined.This study analyzed the structures of different DL networks,discussed five main application scenarios,and assessed both the advancements and limitations of DL in geological hazard analysis.The results indicated that the increasing number of articles per year reflects growing interest in landslide mapping by artificial intelligence,with U-Net-based structures gaining prominence due to their flexibility in feature extraction and generalization.Finally,we explored the hindrances of DL in landslide hazard research based on the above research content.Challenges such as black-box operations and sample dependence persist,warranting further theoretical research and future application of DL in landslide detection.
文摘Characterized by lithological diversity and rich mineral resources, Benshangul-Gumuz National Regional State located in Asosa Zones, Western Ethiopia has been investigated for geological mapping and morpho-structural lineaments extraction using PALSAR (Phased Array type L-band Synthetic Aperture Radar ) Fine Beam Single (FBS) L-HH polarization and Landsat-5 TM (Thematic Mapper ) datasets. These data were preprocessed to retrieve ground surface reflectance and backscatter coefficients. To overcome the geometry acquisition between the two sensors, they were geometrically and topographically rectified using ASTER-V2 DEM. Intensity-Hue-Saturation, directional filters and automatic lineaments extraction were applied on the datasets for lithological units’ discrimination and structural delimitation for potential mineral exploration. The obtained results showed good relationship among the topographic morphology, rock-substrate, structural variations properties, and drainage network. The spectral variations were easily associated with lithological units. Likewise, the morpho-structural information highlighted in the PALSAR image was visible without altering the radiometric integrity of the details in TM bands through the fusion process. Moreover, predominant lineaments directions trending NE-SW, NS, and NW-SE were identified. Results of this study highlighted the importance of the PALSAR FBS L-HH mode and TM data fusion to enhance geological features and lithological units for mineral exploration particularly in tropical zones.
基金funded by China Geological Survey (grant no.1212011120899)the Department of Geology & Mining, China National Nuclear Corporation (grant no.201498)
文摘Hyperspectral remote sensing is now a frontier of the remote sensing technology. Airborne hyperspectral remote sensing data have hundreds of narrow bands to obtain complete and continuous ground-object spectra. Therefore, they can be effectively used to identify these grotmd objects which are difficult to discriminate by using wide-band data, and show much promise in geological survey. At the height of 1500 m, have 36 bands in visible to the CASI hyperspectral data near-infrared spectral range, with a spectral resolution of 19 nm and a space resolution of 0.9 m. The SASI data have 101 bands in the shortwave infrared spectral range, with a spectral resolution of 15 nm and a space resolution of 2.25 m. In 2010, China Geological Survey deployed an airborne CASI/SASI hyperspectral measurement project, and selected the Liuyuan and Fangshankou areas in the Beishan metallogenic belt of Gansu Province, and the Nachitai area of East Kunlun metallogenic belt in Qinghai Province to conduct geological survey. The work period of this project was three years.
文摘Mineral potential assessment at the Earth’s surface has been an important research for geoscientists around the world in the past five decades. The fundamental aspects of mineral assessment at different scales can be associated with the following tasks, e.g., mineral potential mapping and estimation of mineral resources. This paper summarized the history and development in terms of theories, methods technologies and software platforms for quantitative assessment of mineral resources in China, e.g. comprehensive information methodology, geological anomaly, three-component quantitative prediction method, 5P orefinding area, integrated information assessment method, nonlinear process modeling and fractals, three dimensional mineral potential mapping, etc. At last, to discuss the future of quantitative mineral assessment in an era of big data including platform for 3D visualization, analysis and sharing, new methods and protocols for data cleaning, information enhancement, information integration, and uncertainties and multiple explanations of multi-information.
文摘The basis of accurate mineral resource estimates is to have a geological model which replicates the nature and style of the orebody. Key inputs into the generation of a good geological model are the sample data and mapping information. The Obuasi Mine sample data with a lot of legacy issues were subjected to a robust validation process and integrated with mapping information to generate an accurate geological orebody model for mineral resource estimation in Block 8 Lower. Validation of the sample data focused on replacing missing collar coordinates, missing assays, and correcting magnetic declination that was used to convert the downhole surveys from true to magnetic, fix missing lithology and finally assign confidence numbers to all the sample data. The missing coordinates which were replaced ensured that the sample data plotted at their correct location in space as intended from the planning stage. Magnetic declination data, which was maintained constant throughout all the years even though it changes every year, was also corrected in the validation project. The corrected magnetic declination ensured that the drillholes were plotted on their accurate trajectory as per the planned azimuth and also reflected the true position of the intercepted mineralized fissure(s) which was previously not the case and marked a major blot in the modelling of the Obuasi orebody. The incorporation of mapped data with the validated sample data in the wireframes resulted in a better interpretation of the orebody. The updated mineral resource generated by domaining quartz from the sulphides and compared with the old resource showed that the sulphide tonnes in the old resource estimates were overestimated by 1% and the grade overestimated by 8.5%.
基金supported by the National Natural Science Foundation of China(Grant Nos.42321001,42172326)the Natural Science Foundation of Hubei Province(China)(Grant No.2023AFA001)。
文摘Mineral prospectivity mapping(MPM)is designed to reduce the exploration search space by combining and analyzing geological prospecting big data.Such geological big data are too large and complex for humans to effectively handle and interpret.Artificial intelligence(AI)algorithms,which are powerful tools for mining nonlinear mineralization patterns in big data obtained from mineral exploration,have demonstrated excellent performance in MPM.However,AI-driven MPM faces several challenges,including difficult interpretability,poor generalizability,and physical inconsistencies.In this study,based on previous studies,we devised a novel workflow that aims to constructing more transparent and explainable artificial intelligence(XAI)models for MPM by embedding domain knowledge throughout the AI-driven MPM,from input data to model design and model output.This newly proposed approach provides strong geological and conceptual leads that guide the entire AI-driven MPM model training process,thereby improving model interpretability and performance.Overall,the development of XAI models for MPM is capable of embedding prior and expert knowledge throughout the modeling process,presenting a valuable and promising area for future research designed to improve MPM.
基金financially supported by the Chinese MOST project“Methods and Models for Quantitative Prediction of Deep Metallogenic Geological Anomalies”(No.2017YFC0601502)and“Research on key technology of mineral prediction based on geological big data analysis”(No.6142A01190104)。
文摘Today’s era of big data is witnessing a gradual increase in the amount of data,more correlations between data,as well as growth in their spatial dimension.Conventional linear statistical models applied to mineral prospectivity mapping(MPM)perform poorly because of the random and nonlinear nature of metallogenic processes.To overcome this performance degradation,deep learning models have been introduced in 3 D MPM.In this study,taking the Huayuan sedimentary Mn deposit in Hunan Province as an example,we construct a 3 D digital model of this deposit based on the prospectivity model of the study area.In this approach,3 D predictor layers are converted from the conceptual model and employed in a 3 D convolutional neural network(3 D CNN).The characteristics of the spatial distribution are extracted by the 3 D CNN.Subsequently,we divide the 22 extracted ore-controlling variables into six groups for contrast experiments based on various combinations and further apply the 3 D CNN model and weight of evidence(WofE)method on each group.The predictive model is trained on the basis of the coupling correlation between the spatial distributions of the variables and the underground occurrence space of the Mn orebodies,and the correlation between different ore-controlling factors.The analysis of 12 factors indicates that the 3 D CNN model performs well in the 3 D MPM,achieving a promising accuracy of up to 100%and a loss value below 0.001.A comparison shows that the 3 D CNN model outperforms the WofE model in terms of predictive evaluation indexes,namely the success rate and ore-controlling rate.In particular,the 1–12 ore-controlling factors selected in experiment 5 provide a significantly better prediction effect than the other factors.Consequently,we conclude that the Mn deposit in the study area is not only related to the stratum and interlaminar anomalous bodies but also to the spatial distribution of the faults.The experimental results confirm that the proposed 3 D CNN is promising for 3 D MPM as it eliminates the interference factors.
