First Light Curve Analysis of NSVS 8294044,V1023 Her,and V1397 Her Contact Binary Systems

The first photometric light curve investigation of the NSVS 8294044,V1023 Her,and V1397 Her binary systems is presented.We used ground-based observations for the NSVS 8294044 system and Transiting Exoplanet Survey Satellite data for V1023 Her and V1397 Her.The primary and secondary times of minima were extracted from al the data,and,by collecting the literature,a new ephemeris was computed for each system.Linear fits for the O-C diagrams were conducted using the Markov Chain Monte Carlo (MCMC) method.Light curve solutions were performed using the PHysics Of Eclipsing BinariEs Python code and the MCMC approach.The systems were found to be contact binary stars based on the fillout factor and mass ratio.V1023 Her showed the O’Connell effect and a cold starspot on the secondary component was required for the light curve solution.The absolute parameters of the system were estimated based on an empirical relationship between orbital period and mass.We presented a new T–M equation based on a sample of 428 contact binary systems and found that our three target systems were in good agreement with the fit.The positions of the systems were also depicted on the M–L,M–R,q–L_(ratio),and M_(tot)–J_(0)diagrams in the logarithmic scales.

Rapid and stable calcium-looping solar thermochemical energy storage via co-doping binary sulfate and Al–Mn–Fe oxides

Solar thermochemical energy storage based on calcium looping(CaL)process is a promising technology for next-generation concentrated solar power(CSP)systems.However,conventional calcium carbonate(CaCO_(3))pellets suffer from slow reaction kinetics,poor stability,and low solar absorptance.Here,we successfully realized high power density and highly stable solar thermochemical energy storage/release by synergistically accelerating energy storage/release via binary sulfate and promoting cycle stability,mechanical strength,and solar absorptance via Al–Mn–Fe oxides.The energy storage density of proposed CaCO_(3)pellets is still as high as 1455 kJ kg^(-1)with only a slight decay rate of 4.91%over 100 cycles,which is higher than that of state-of-the-art pellets in the literature,in stark contrast to 69.9%of pure CaCO_(3)pellets over 35 cycles.Compared with pure CaCO_(3),the energy storage power density or decomposition rate is improved by 120%due to lower activation energy and promotion of Ca^(2+)diffusion by binary sulfate.The energy release or carbonation rate rises by 10%because of high O^(2-)transport ability of molten binary sulfate.Benefiting from fast energy storage/release rate and high solar absorptance,thermochemical energy storage efficiency is enhanced by more than 50%under direct solar irradiation.This work paves the way for application of direct solar thermochemical energy storage techniques via achieving fast energy storage/release rate,high energy density,good cyclic stability,and high solar absorptance simultaneously.

Generating Sets of the Complete Semigroup of Binary Relations Defined by Semilattices of the Class Σ8(X, 5)

In this article, we study generating sets of the complete semigroups of binary relations defined by X-semilattices of unions of the class Σ8(X, 5). Found uniquely irreducible generating set for the given semigroups and when X is finite set formulas for calculating the number of elements in generating sets are derived.

Photometric and Spectroscopic Study of Ten Low Mass Ratio Contact Binary Systems:Orbital Stability,O'Connell Effect and Infrared Calcium Line Filling

Low mass ratio contact binary systems are more likely to have unstable orbits and potentially merge.In addition,such systems exhibit characteristics such as starspots and high energy emissions(UV)suggestive of chromospheric and magnetic activity.Light curve modeling of ten contact binary systems is reported.All were found to be of extreme low mass ratio ranging from 0.122 to 0.24 and three were found to be potentially unstable and possible merger candidates.Filling of the infrared calcium absorption lines is a marker of increased chromospheric activity.We use the available Large Sky Area Multi-Object Fiber Spectroscopic Telescope spectra along with matched standard spectra(broadened for rotation)to measure the excess filling of the central core depression flux of the two main infrared calcium absorption linesλ8542 andλ8662.We find that all reported contact binaries have excess filling of the core flux in the infrared calcium lines.Three of the systems reported were also observed by the Galaxy Evolution Explorer mission and we find that all three have features of excess ultraviolet emissions further adding evidence for increased chromospheric activity in low mass ratio contact binaries.Analysis of both orbital stability and absorption line filling is dependent on the determination of geometric and absolute parameters from light curve modeling.Not an insignificant number of contact binary light curves exhibit the O’Connell effect,usually attributed to starspots.We discuss the inclusion of starspots in light curve solutions and how they influence the geometric and absolute parameters.

Hydrogen release of NaBH_(4) below 60 ℃ with binary eutectic mixture of xylitol and erythritol additive

NaBH_(4) was widely regarded as a low-cost hydrogen storage material due to its high-mass hydrogen capacity of approximately 10.8%(mass)and high volumetric hydrogen capacity of around 115 g·L^(–1).However,it exhibits strong stability and requires temperatures above 500℃ for hydrogen release in practical applications.In this study,two polyhydric alcohols,xylitol and erythritol(XE),were prepared as a binary eutectic sugar alcohol through a grinding-melting method.This binary eutectic sugar alcohol was used as a proton-hydrogen carrier to destabilize NaBH_(4).The 19NaBH_(4)-16XE composite material prepared by ball milling could start releasing hydrogen at 57.5℃,and the total hydrogen release can reach over 88.8%(4.45%(mass))of the theoretical capacity.When the 19NaBH_(4)-16XE composite was pressed into solid blocks,the volumetric hydrogen capacity of the block-shaped composite could reach 67.2 g·L^(–1).By controlling the temperature,the hydrogen desorption capacity of the NaBH_(4)-XE composite material was controllable,which has great potential for achieving solid-state hydrogen production from NaBH_(4).

Boosting MA-based two-dimensional Ruddlesden-Popper perovskite solar cells by incorporating a binary spacer

Two-dimensional Ruddlesden-Popper(2DRP)perovskite exhibits excellent stability in perovskite solar cells(PSCs)due to introducing hydrophobic long-chain organic spacers.However,the poor charge transporting property of bulky organic cation spacers limits the performance of 2DRP PSCs.Inspired by the Asite cation alloying strategy in 3D perovskites,2DRP perovskites with a binary spacer can promote charge transporting compared to the unary spacer counterparts.Herein,the superior MA-based 2DRP perovskite films with a binary spacer,including 3-guanidinopropanoic acid(GPA)and 4-fluorophenethylamine(FPEA)are realized.These films(GPA_(0.85)FPEA_(0.15))_(2)MA_(4)Pb_5I_(16)show good morphology,large grain size,decreased trap state density,and preferential orientation of the as-prepared film.Accordingly,the present 2DRP-based PSC with the binary spacer achieves a remarkable efficiency of 18.37%with a V_(OC)of1.15 V,a J_(SC)of 20.13 mA cm^(-2),and an FF of 79.23%.To our knowledge,the PCE value should be the highest for binary spacer MA-based 2DRP(n≤5)PSCs to date.Importantly,owing to the hydrophobic fluorine group of FPEA and the enhanced interlayer interaction by FPEA,the unencapsulated 2DRP PSCs based on binary spacers exhibit much excellent humidity stability and thermal stability than the unary spacer counterparts.

An active learning workflow for predicting hydrogen atom adsorption energies on binary oxides based on local electronic transfer features

Machine learning combined with density functional theory(DFT)enables rapid exploration of catalyst descriptors space such as adsorption energy,facilitating rapid and effective catalyst screening.However,there is still a lack of models for predicting adsorption energies on oxides,due to the complexity of elemental species and the ambiguous coordination environment.This work proposes an active learning workflow(LeNN)founded on local electronic transfer features(e)and the principle of coordinate rotation invariance.By accurately characterizing the electron transfer to adsorption site atoms and their surrounding geometric structures,LeNN mitigates abrupt feature changes due to different element types and clarifies coordination environments.As a result,it enables the prediction of^(*)H adsorption energy on binary oxide surfaces with a mean absolute error(MAE)below 0.18 eV.Moreover,we incorporate local coverage(θ_(l))and leverage neutral network ensemble to establish an active learning workflow,attaining a prediction MAE below 0.2 eV for 5419 multi-^(*)H adsorption structures.These findings validate the universality and capability of the proposed features in predicting^(*)H adsorption energy on binary oxide surfaces.

Micromechanism and mathematical model of stress sensitivity in tight reservoirs of binary granular medium

Research on reservoir rock stress sensitivity has traditionally focused on unary granular structures,neglecting the binary nature of real reservoirs,especially tight reservoirs.Understanding the stresssensitive behavior and mathematical characterization of binary granular media remains a challenging task.In this study,we conducted online-NMR experiments to investigate the permeability and porosity evolution as well as stress-sensitive control mechanisms in tight sandy conglomerate samples.The results revealed stress sensitivity coefficients between 0.042 and 0.098 and permeability damage rates ranging from 65.6%to 90.9%,with an average pore compression coefficient of 0.0168—0.0208 MPa 1.Pore-scale compression occurred in three stages:filling,compression,and compaction,with matrix pores playing a dominant role in pore compression.The stress sensitivity of binary granular media was found to be influenced by the support structure and particle properties.High stress sensitivity was associated with small fine particle size,high fines content,high uniformity coefficient of particle size,high plastic deformation,and low Young's modulus.Matrix-supported samples exhibited a high irreversible permeability damage rate(average=74.2%)and stress sensitivity coefficients(average=0.089),with pore spaces more slit-like.In contrast,grain-supported samples showed low stress sensitivity coefficients(average=0.021)at high stress stages.Based on the experiments,we developed a mathematical model for stress sensitivity in binary granular media,considering binary granular properties and nested interactions using Hertz contact deformation and Poiseuille theory.By describing the change in activity content of fines under stress,we characterized the non-stationary state of compressive deformation in the binary granular structure and classified the reservoir into three categories.The model was applied for production prediction using actual data from the Mahu reservoir in China,showing that the energy retention rates of support-dominated,fill-dominated,and matrix-controlled reservoirs should be higher than 70.1%,88%,and 90.2%,respectively.

Timing and Spectral Analysis of the Black Hole X-Ray Binary MAXI J1803-298 with Insight-HXMT Data

We present a comprehensive analysis of the 2021 outburst of MAXI J1803–298 utilizing observations of the Insight-Hard X-ray Modulation Telescope(Insight-HXMT)spanning from the low hard state to the high soft state.Within the Insight-HXMT data set,compared to the previous work,we identify a more prolonged presence of typeC quasi-periodic oscillations(QPOs)with centroid frequencies ranging from~0.16 to 6.3 Hz,which present correlations with the hardness ratio and the photon index of the Comptonized component.For QPO frequencies less than~2 Hz,the QPO phase lags are hard(photons of 10–19 keV arrive later than those of 1–4 keV),while at higher frequencies,the lags become soft at and above~4 Hz.Furthermore,the spectra in all Insight-HXMT observations consist of a multi-color blackbody component and a Comptonized component,as commonly observed in classical black hole X-ray binaries.We analyze state transitions and the evolution of accretion geometry in this work.The fitted inner disk radius increases abnormally during the low hard state,hypothesized to result from the corona condensing onto the inner disk.Additionally,two significant drops in flux are observed during the soft intermediate state,maybe implying changes in the corona/jet and the disk,respectively.

Molecular packing tuning via chlorinated end group enables efficient binary organic solar cells over 18.5%

Designing novel nonfullerene acceptors(NFAs)is of vital importance for the development of organic solar cells(OSC).Modification on the side chain and end group are two powerful tools to construct efficient NFAs.Here,based on the high-performance L8BO,we selected 3-ethylheptyl to substitute the inner chain of 2-ethylhexyl,obtaining the backbone of BON3.Then we introduced different halogen atoms of fluorine and chlorine on 2-(3-oxo-2,3-dihydro-1Hinden-1-ylidene)malononitrile end group(EG)to construct efficient NFAs named BON3-F and BON3-Cl,respectively.Polymer donor D18 was chosen to combine with two novel NFAs to construct OSC devices.Impressively,D18:BON3-Cl-based device shows a remarkable power conversion efficiency(PCE)of 18.57%,with a high open-circuit voltage(V_(OC))of 0.907 V and an excellent fill factor(FF)of 80.44%,which is one of the highest binary PCE of devices based on D18 as the donor.However,BON3-F-based device shows a relatively lower PCE of 17.79%with a decreased FF of 79.05%.The better photovoltaic performance is mainly attributed to the red-shifted absorption,higher electron and hole mobilities,reduced charge recombination,and enhanced molecular packing in the D18:BON3-Cl films.Also,we performed stability tests on two binary systems;the D18:BON3-Cl and D18:BON3-F devices maintain 88.1%and 85.5%of their initial efficiencies after 169 h of storage at 85°C in an N2-filled glove box,respectively.Our work demonstrates the importance of selecting halogen atoms on EG and provides an efficient binary system of D18:BON3-Cl for further improvement of PCE.

V0405 Dra:A New Deep and Low Mass Ratio Contact Binary with Extremely Fast Decrease in the Orbital Period

V0405 Dra is a W UMa-type binary star.Based on the TESS data,we have conducted an orbital period study and performed a light curve analysis for the system.The orbital period study reveals that the O-C curve for V0405 Dra exhibits secular decrease at an extremely high rate of d P/dt=-2.71×10^(-6)day year^(-1),along with periodic variations characterized by an amplitude of A_(3)=0.0032 day and a period of P_(3)=1.413 years.The orbital periodic change is possibly due to the light-travel time effect resulting from an additional third body in the system,for which we estimate a minimum mass of M_(3)=0.77M_(⊙).By employing the 2013 version of the Wilson-Devinney(W-D)method to synthesize a light curve,we derived photometric solutions indicating that V0405 Dra is a new deep(f=68.7%)and low-mass ratio(q=0.175)contact binary.The fast decrease in its orbital period is likely caused by mass transfer from the more massive primary star to the less massive secondary star,or due to angular momentum loss.With further mass transfer and loss of angular momentum,the binary will gradually evolve into a tighter contact configuration,eventually leading to a merger into a single star,following the evolutionary paths suggested for such deep and low mass ratio contact binaries.

The Completeness of Accreting Neutron Star Binary Candidates from the Chinese Space Station Telescope

A neutron star(NS)has many extreme physical conditions,and one may obtain some important information about an NS via accreting neutron star binary(ANSB)systems.The upcoming Chinese Space Station Telescope(CSST)provides an opportunity to search for a large sample of ANSB candidates.Our goal is to check the completeness of the potential ANSB samples from CSST data.In this paper,we generate some ANSBs and normal binaries under the CSST photometric system by binary evolution and binary population synthesis method and use a machine learning method to train a classification model.Although the Precision(94.56%)of our machine learning model is as high as before study,the Recall is only about 63.29%.The Precision/Recall is mainly determined by the mass transfer rate between the NSs and their companions.In addition,we also find that the completeness of ANSB samples from CSST photometric data by the machine learning method also depends on the companion mass and the age of the system.ANSB candidates with a low initial mass companion star(0.1 M_(⊙)to 1 M_(⊙))have a relatively high Precision(94.94%)and high Recall(86.32%),whereas ANSB candidates with a higher initial mass companion star(1.1 M_(⊙)to 3 M_(⊙))have similar Precision(93.88%)and quite low Recall(42.67%).Our results indicate that although the machine learning method may obtain a relatively pure sample of ANSBs,a completeness correction is necessary for one to obtain a complete sample.

Periodic Variation Studies of the Two Short Period W UMa-type Eclipsing Binaries: LX Lyn and V0853 Aur

In this paper,new light curves(LCs) of contact eclipsing binary(CEB) systems LX Lyn and V0853 Aur are presented and analyzed by using the 2015 version of the Wilson-Devinney(W-D) code.In order to explain their asymmetric LCs,cool starspots on the components were employed.It is suggested that their fill-out degrees are f=12.0%(LX Lyn) and f=26.3%(V0853 Aur).At the same time,we found that LX Lyn is a W-type eclipsing binary(EB) with an orbital inclination of i=84°.88 and a mass ratio of q=2.31.V0853 Aur is also a W-type CEB with a mass ratio of q=2.77 and an orbital inclination of i= 79°.26.Based on all available times of light minimum,their orbital period changes are studied by using the O-C method.The O-C diagram of LX Lyn reveals a cyclic oscillation with a period of about 14.84 yr and an amplitude of 0.0019 days,which can be explained by the light-travel time effect(LTTE) due to the presence of a third body with a minimum mass of0.06M_⊙.For V0853 Aur,it is discovered that the O-C diagram of the system also shows a cyclic oscillation with a period of 9.64 yr and an amplitude of 0.03365 days.The cyclic oscillation of V0853 Aur can be attributed to the LTTE by means of a third body with a mass no less than 3.77M_⊙.The third body may play an important role in the formation and evolution of these systems.

Enhancing Hyper-Spectral Image Classification with Reinforcement Learning and Advanced Multi-Objective Binary Grey Wolf Optimization

Hyperspectral(HS)image classification plays a crucial role in numerous areas including remote sensing(RS),agriculture,and the monitoring of the environment.Optimal band selection in HS images is crucial for improving the efficiency and accuracy of image classification.This process involves selecting the most informative spectral bands,which leads to a reduction in data volume.Focusing on these key bands also enhances the accuracy of classification algorithms,as redundant or irrelevant bands,which can introduce noise and lower model performance,are excluded.In this paper,we propose an approach for HS image classification using deep Q learning(DQL)and a novel multi-objective binary grey wolf optimizer(MOBGWO).We investigate the MOBGWO for optimal band selection to further enhance the accuracy of HS image classification.In the suggested MOBGWO,a new sigmoid function is introduced as a transfer function to modify the wolves’position.The primary objective of this classification is to reduce the number of bands while maximizing classification accuracy.To evaluate the effectiveness of our approach,we conducted experiments on publicly available HS image datasets,including Pavia University,Washington Mall,and Indian Pines datasets.We compared the performance of our proposed method with several state-of-the-art deep learning(DL)and machine learning(ML)algorithms,including long short-term memory(LSTM),deep neural network(DNN),recurrent neural network(RNN),support vector machine(SVM),and random forest(RF).Our experimental results demonstrate that the Hybrid MOBGWO-DQL significantly improves classification accuracy compared to traditional optimization and DL techniques.MOBGWO-DQL shows greater accuracy in classifying most categories in both datasets used.For the Indian Pine dataset,the MOBGWO-DQL architecture achieved a kappa coefficient(KC)of 97.68%and an overall accuracy(OA)of 94.32%.This was accompanied by the lowest root mean square error(RMSE)of 0.94,indicating very precise predictions with minimal error.In the case of the Pavia University dataset,the MOBGWO-DQL model demonstrated outstanding performance with the highest KC of 98.72%and an impressive OA of 96.01%.It also recorded the lowest RMSE at 0.63,reinforcing its accuracy in predictions.The results clearly demonstrate that the proposed MOBGWO-DQL architecture not only reaches a highly accurate model more quickly but also maintains superior performance throughout the training process.

Binary Phase Shaping and SHG Contrast Ratios

Finding binary sequences with Large SHG ratios is very important in the field of ultrafast science, biomedical optics, high-resolution microscopy and label-free imaging. In this paper, we have demonstrated the relation between the SHG contrast ratio and the traditional Merit Factor values. And in the light from known results in Merit Factor Problems, we have shown that Legendre Sequences or Jacobi Sequences, are still the best candidates to obtain binary sequences with large SHG contrast ratios. The authors also discussed the SHG behaviors on some sequences obtained from cyclotomic classes over the finite field GF (2l) .

A Future Life of Binary Phase Diagrams

The article raises the question of what to do with one of the main achievements of metal science in recent years—binary phase diagrams. These diagrams play a key role in the science of alloys and therefore their reliability must be complete. However, the discovery of the “ordering-separation” phase transition, which showed that in binary alloys at certain temperatures the sign of the chemical interatomic interaction changes (and, consequently, the microstructure changes), forces us to reconsider our ideas about those areas. Currently, these areas are designated on diagrams as areas of a “disordered solid solution.” This article proposes, using transmission electron microscopy, to study all the so-called solid solution regions, and apply the results obtained to the studied regions of the phase diagram.

Investigating Transport Properties of Environmentally Friendly Azeotropic Binary Blends Based on Evaporation in Auto-Cascade Refrigeration

The exploration of performance and prediction of environmentally friendly refrigerant physical properties represents a critical endeavor.Equilibriummolecular dynamics simulationswere employed to investigate the density and transport properties of propane and ethane at ultra-low temperatures under evaporative pressure conditions.The results of the density simulation of the evaporation conditions of the blends proved the validity of the simulation method.Under identical temperature and pressure conditions,increasing the proportion of R170 in the refrigerant blends leads to a density decrease while the temperature range in which the gas-liquid phase transition occurs is lower.The analysis of simulated results pertaining to viscosity,thermal conductivity,and self-diffusion coefficient reveals heightened deviation levels within the phase transition temperature zone.This increase in deviation attributed to intensified molecular activity.In terms of uncovering the physical mechanism of gas-liquid phase transition,the work illustrates the macroscopic phenomenon of the intensified existing disorder during phase transitions at the molecular level.Molecular dynamics simulations analyzing the thermophysical properties of refrigerant blends from a microscopic point of view can deepen the comprehension of the thermal optimization of refrigeration processes.

BSN:The First Light Curve Analysis of the Total Eclipse Binary System EL Tuc

We conducted the first light curve study of the binary star EL Tuc within the Binary Systems of South and North project's framework.The photometric observations were made using standard multiband BVR_cI_c filters at an observatory in Argentina.We presented a new ephemeris for EL Tuc and a linear fit to the O–C diagram,utilizing our extracted times of minima and additional literature.We employed the PHysics Of Eclipsing BinariEs Python code and the Markov chain Monte Carlo approach for the system's light curve analysis.The target system's light curve solution required a cold starspot on the hotter component.We conclude that EL Tuc is a total contact binary system with a low mass ratio of q=0.172±0.002,an orbital inclination of i=83°.74±0°.40,and a fillout factor of f=53.7%±1.6%.We used the P-a relationship and the Gaia Data Release 3 parallax method to determine the absolute parameters of EL Tuc to compare the precision of our results.This system was classified as W-type based on the mass and effective temperature of the companion stars.The positions of the systems were depicted on the M-L,M-R,T-M,and q-Lratiodiagrams.The relationship between the spectroscopic and photometric mass ratios of binaries was discussed.

Formation of a Rapidly Rotating Classical Be-star in a Massive Close Binary System

This paper investigates the spin-up of a mass-accreting star in a close binary system passing through the first stage of mass exchange in the Hertzsprung gap. Inside an accreting star, angular momentum is carried by meridional circulation and shear turbulence. The circulation carries part of the angular momentum of the accreted layers to the accretor's surface. The greater the rate of arrival of angular momentum in the accretor is, the greater this part. It is assumed that this part of the angular momentum can be removed by the disk further from the accretor. If the angular momentum in the matter entering the accretor is more than half the Keplerian value, then the angular momentum obtained by the accretor during mass exchange stage does not depend on the rate of arrival of angular momentum. The accretor may have the characteristics of a Be-star immediately after the end of mass exchange.

Long-term Speckle Interferometric Monitoring of Binary Systems:2007–2023Positional Measurements and Orbits of Seven Objects

The results of seventeen years of speckle interferometric monitoring of seven objects(Chara 122Aa,GJ 3010,HIP1987,GJ 3076,HIP 11253,HIP 11352,and HIP 14929)are presented.Observational data were obtained at the 6 m Big Telescope Alt-azimuthal Special Astrophysical Observatory of the Russian Academy of Science(BTA SAO RAS)from 2007 to the present.Analysis of previously published and new measurements made it possible to construct completely new orbits for Chara 122Aa,HIP 11253,and HIP 14929.The orbit of GJ 3076 cannot be constructed accurately due to the large influence of the weights assigned to the measurements.The resulting orbital solutions are classified based on a grading scheme suggested by W.I.Hartkopf,B.D.Mason and C.E.Worley;most orbits are“definitive”(Grade 1).The mass sums and masses of components calculated by two independent methods using Hipparcos and Gaia DR2 and DR3 parallaxes were compared for the objects under study.