Experimental results of a denitrification process which is driven and controlled by the electric current are demonstrated in this paper. Hydrogen produced from a carbon cathode by denitrifying microorganisms adhered t...Experimental results of a denitrification process which is driven and controlled by the electric current are demonstrated in this paper. Hydrogen produced from a carbon cathode by denitrifying microorganisms adhered to the cathode surface was used to reduce nitrate to nitrogen gas. The denitrification results have close relationships with materials and structures of electrodes applied. The experimental results showed that denitrification can proceed steadily and efficiently by using carbon black as anode material, and surface roughened graphite can adhere much more biomass. The estimated energy required to remove 20mg nitrate nitrogen from 1 liter water is about 1.20×10 -4 kWh.展开更多
Objective To develop a coated electrode of immobilized denitrificants and to evaluate the performance of a bioelectrochemical reactor to enhance and control denitrification, Methods Denitrifying bacteria were develope...Objective To develop a coated electrode of immobilized denitrificants and to evaluate the performance of a bioelectrochemical reactor to enhance and control denitrification, Methods Denitrifying bacteria were developed by batch incubation and immobilized with polyvinyl alcohol （PVA） on the surface of activated carbon fiber （ACF） to make a coated electrode. Then the coated electrode （cathode） and graphite electrode （anode） were transferred to the reactor to reduce nitrate. Results After acclimated to the mixtrophic and autotrophic denitrification stages, the denitrifying bacteria could use hydrogen as an electron donor to reduce nitrate, When the initial nitrate concentration was 30.2 mg NO3-N/L, the denitrification efficiency was 57.3% at an applied electric current of 15 mA and a hydraulic retention time （HRT） of 12 hours. Correspondingly, the current density was 0.083 mA / cm^2. The nitrate removal rate of the reactor was 34,4 g NO3-N / m^3,d, and the surface area loading was 1.34 g NO3-N / m^2.d. Conclusion The coated electrode may keep high quantity of blomass, thus achieving a high denitrification rate. Denitrification efficiencies are related to HRT, current density, oxidation reduction potential （ORP）, dissolved oxygen （DO）, pH value, and temperature,展开更多
针对污水处理厂尾水TN去除问题,采用16S r DNA克隆文库法,探究了3DBER-S(三维电极生物膜耦合硫自养脱氮工艺)的强化脱氮机制及其菌群特征.结果表明,I(电流)和HRT(水力停留时间)对3DEBR-S中氢自养和硫自养反硝化作用所占比例的影响较大,...针对污水处理厂尾水TN去除问题,采用16S r DNA克隆文库法,探究了3DBER-S(三维电极生物膜耦合硫自养脱氮工艺)的强化脱氮机制及其菌群特征.结果表明,I(电流)和HRT(水力停留时间)对3DEBR-S中氢自养和硫自养反硝化作用所占比例的影响较大,但对脱氮效率影响不显著.当进水C/N〔ρ(CODCr)/ρ(TN)〕为1、ρ(NO3--N)为35 mg/L、I为300 m A、HRT为4 h时,NO3--N和TN去除率可分别稳定在80%和74%以上.16S r DNA克隆文库结果显示,反应器中β变形菌纲为优势菌群,占47.89%〔以OUT(操作单元)计〕.在β变形菌纲中,与具有反硝化功能的陶厄氏菌属(Thauera)相似的细菌所占比例最大,为52.94%;与可分别利用硫和氢为电子供体进行反硝化脱氮的硫杆菌属(Thiobacillus)和食酸菌属(Acidovorax)相似的细菌分别占17.65%和14.71%.3DBER-S中存在异养联合氢自养和硫自养反硝化协同去除硝酸盐氮的作用,可为反硝化脱氮提供充足的电子供体,节约了有机碳源消耗,并保证了稳定高效的脱氮效果.展开更多
文摘Experimental results of a denitrification process which is driven and controlled by the electric current are demonstrated in this paper. Hydrogen produced from a carbon cathode by denitrifying microorganisms adhered to the cathode surface was used to reduce nitrate to nitrogen gas. The denitrification results have close relationships with materials and structures of electrodes applied. The experimental results showed that denitrification can proceed steadily and efficiently by using carbon black as anode material, and surface roughened graphite can adhere much more biomass. The estimated energy required to remove 20mg nitrate nitrogen from 1 liter water is about 1.20×10 -4 kWh.
基金This research was supported by the Natural Natural Science Foundation (No. 39870664).
文摘Objective To develop a coated electrode of immobilized denitrificants and to evaluate the performance of a bioelectrochemical reactor to enhance and control denitrification, Methods Denitrifying bacteria were developed by batch incubation and immobilized with polyvinyl alcohol （PVA） on the surface of activated carbon fiber （ACF） to make a coated electrode. Then the coated electrode （cathode） and graphite electrode （anode） were transferred to the reactor to reduce nitrate. Results After acclimated to the mixtrophic and autotrophic denitrification stages, the denitrifying bacteria could use hydrogen as an electron donor to reduce nitrate, When the initial nitrate concentration was 30.2 mg NO3-N/L, the denitrification efficiency was 57.3% at an applied electric current of 15 mA and a hydraulic retention time （HRT） of 12 hours. Correspondingly, the current density was 0.083 mA / cm^2. The nitrate removal rate of the reactor was 34,4 g NO3-N / m^3,d, and the surface area loading was 1.34 g NO3-N / m^2.d. Conclusion The coated electrode may keep high quantity of blomass, thus achieving a high denitrification rate. Denitrification efficiencies are related to HRT, current density, oxidation reduction potential （ORP）, dissolved oxygen （DO）, pH value, and temperature,
文摘针对污水处理厂尾水TN去除问题,采用16S r DNA克隆文库法,探究了3DBER-S(三维电极生物膜耦合硫自养脱氮工艺)的强化脱氮机制及其菌群特征.结果表明,I(电流)和HRT(水力停留时间)对3DEBR-S中氢自养和硫自养反硝化作用所占比例的影响较大,但对脱氮效率影响不显著.当进水C/N〔ρ(CODCr)/ρ(TN)〕为1、ρ(NO3--N)为35 mg/L、I为300 m A、HRT为4 h时,NO3--N和TN去除率可分别稳定在80%和74%以上.16S r DNA克隆文库结果显示,反应器中β变形菌纲为优势菌群,占47.89%〔以OUT(操作单元)计〕.在β变形菌纲中,与具有反硝化功能的陶厄氏菌属(Thauera)相似的细菌所占比例最大,为52.94%;与可分别利用硫和氢为电子供体进行反硝化脱氮的硫杆菌属(Thiobacillus)和食酸菌属(Acidovorax)相似的细菌分别占17.65%和14.71%.3DBER-S中存在异养联合氢自养和硫自养反硝化协同去除硝酸盐氮的作用,可为反硝化脱氮提供充足的电子供体,节约了有机碳源消耗,并保证了稳定高效的脱氮效果.
