期刊文献+
共找到400篇文章
< 1 2 20 >
每页显示 20 50 100
Explosion damage effects of aviation kerosene storage tank under strong ignition
1
作者 Shixiang Song Cheng Wang +1 位作者 Boyang Qiao Gongtian Gu 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第7期27-38,共12页
In order to study the blast damage effects of aviation kerosene storage tanks,the out-field explosion experiments of 8 m3fixed-roof tanks were carried out.The fragments,shock wave and fireball thermal radiation of the... In order to study the blast damage effects of aviation kerosene storage tanks,the out-field explosion experiments of 8 m3fixed-roof tanks were carried out.The fragments,shock wave and fireball thermal radiation of the tank in the presence of bottom oil,half oil and full oil,as well as empty tank,were investigated under internal explosion by various TNT charge contents(1.8 kg,3.5 kg and 6.2 kg).The results showed that the tank roof was the only fragment produced,and the damage forms could be divided into three types.The increase of TNT charge content and oil volume enlarged the deformation of the tank,while the hole ratio presented a trend of increase first and then decrease.The H_r,maxand V_(max)values positively increased as increasing the TNT charge content and oil volume(from empty to half oil),but decreased in full oil.The Pmaxvalues had a progressive increase with the increment of TNT charge content,but not the case with the increase in oil volumes.The development of fireball was divided into three stages:tank roof‘towed'flame,jet flow flame tumbling and rising,and jet flow flame extinguishing.The Dmaxand Hf,maxvalues both increased as increasing TNT charge content and oil volumes.The oscillation phenomenon of fireball temperature was observed in the cooling process.The average temperature of fireball surface was positively correlated with TNT charge content,and negatively correlated with oil volumes. 展开更多
关键词 aviation kerosene Storage tank Internal explosion Shock wave FIREBALL
下载PDF
The Effect of Ignition Parameters on the Combustion Characteristics of an Aviation Piston Engine
2
作者 Luda Zhu Wenming Cheng +1 位作者 Eryang Liu Shupeng Wang 《World Journal of Engineering and Technology》 2024年第2期245-257,共13页
A cylinder combustion simulation model was established for a two-stroke aviation piston engine used in a small unmanned aerial vehicle. The influence of different ignition system parameters on the combustion process o... A cylinder combustion simulation model was established for a two-stroke aviation piston engine used in a small unmanned aerial vehicle. The influence of different ignition system parameters on the combustion process of aviation kerosene was studied using this model. The research results showed that under the working conditions of 5500 r/min and 50% throttle opening, as the ignition energy increased, the peak values of average cylinder pressure and average temperature increased, and the combustion duration shortened, The advance of the combustion center of gravity increases the tendency of the engine to knock. Under the same operating conditions, as the ignition timing advances, the peak values of average pressure and average temperature in the cylinder increase, gradually approaching the top dead center, and the tendency of engine detonation increases more significantly. 展开更多
关键词 Aircraft Piston Engines aviation kerosene IGNITION Combustion Characteristics KNOCK
下载PDF
Numerical study on non-uniform heat transfer deterioration of supercritical RP-3 aviation kerosene in a horizontal tube 被引量:10
3
作者 Yanhong Wang Yingnan Lu +1 位作者 Sufen Li Ming Dong 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2020年第6期1542-1557,共16页
The convective heat transfer of supercritical-pressure RP-3(Rocket Propellant 3)aviation kerosene in a horizontal circular tube has been numerically studied,focusing mainly on the non-uniform heat transfer deteriorati... The convective heat transfer of supercritical-pressure RP-3(Rocket Propellant 3)aviation kerosene in a horizontal circular tube has been numerically studied,focusing mainly on the non-uniform heat transfer deterioration along the circumferential direction.The governing equations of mass,momentum and energy have been solved using the pressure-based segregated solver based on the finite volume method.The re-normalization group(RNG)k-εturbulence model with an enhanced wall treatment was selected.Considering the heat conduction in the solid wall,the mechanism of heat transfer deterioration and the buoyancy effect on deteriorated heat transfer were discussed.The evolution of secondary flow was analyzed.Effects of the outer-wall heat flux,mass flux,pressure and tube thermal conductivity on heat transfer were investigated.Moreover,the buoyancy criterion and the heat transfer correlation were obtained.Results indicate that the poor flow performance of near-wall fluid causes the pseudo-film boiling,further leads to the heat transfer deterioration.The strong buoyancy has an effect of enhancing the heat transfer at the bottom of tube,and weakening the heat transfer at the top of tube,which results in the non-uniform inner-wall temperature and heat flux distributions.Decreasing the ratio of outer-wall heat flux and mass flux,increasing the pressure could weaken the heat transfer difference along the circumferential direction,while the effect of thermal conductivity of tube on the circumferential parameters distributions is more complicated.When the buoyancy criterion of(Grq/Grth)max≤0.8 is satisfied,the effect of buoyancy could be ignored.The new correlations work well for non-uniform heat transfer predictions. 展开更多
关键词 Supercritical pressure aviation kerosene Non-uniform heat transfer Heat transfer deterioration BUOYANCY Prediction correlation
下载PDF
低压环境下RP-3航空煤油自燃特性研究
4
作者 张沛 王学辉 +2 位作者 王娟 王丹 汪箭 《安全与环境学报》 CAS CSCD 北大核心 2024年第2期545-550,共6页
开展了低压环境下RP-3航空煤油的自燃特性研究,测试了101 kPa、80 kPa、60 kPa、40 kPa、20 kPa五种压力环境下航空煤油自燃点及着火延迟时间数据。结果表明,随着环境压力降低,自燃点升高,并基于谢苗诺夫热自燃理论,建立了耦合压力参数... 开展了低压环境下RP-3航空煤油的自燃特性研究,测试了101 kPa、80 kPa、60 kPa、40 kPa、20 kPa五种压力环境下航空煤油自燃点及着火延迟时间数据。结果表明,随着环境压力降低,自燃点升高,并基于谢苗诺夫热自燃理论,建立了耦合压力参数的自燃点预测模型。分析了环境压力对着火延迟时间的影响机制,建立了不同环境压力下的着火延迟时间预测模型。分析了GB/T 5332—2007标准在低压环境下测试存在的问题,并提出了相关改进方法。 展开更多
关键词 安全工程 RP-3航空煤油 低压环境 自燃点 着火延迟时间
下载PDF
高温高速来流条件下扇形喷嘴雾化特性研究
5
作者 施刚强 吴杰 +10 位作者 胡喆 刘舆帅 王少林 王凯兴 穆勇 阮昌龙 郭玉超 王月 徐纲 何志霞 刘富强 《推进技术》 EI CAS CSCD 北大核心 2024年第6期154-163,共10页
为了探索扇形喷嘴在加力燃烧室应用的可行性,采用Mie散射和PLIF激光测量系统对其在高温高速环境中的雾化特性开展了研究。获得了在不同来流温度、来流马赫数以及燃油流量条件下燃油轨迹变化规律、蒸发距离及气液两相分布特性,并拟合了... 为了探索扇形喷嘴在加力燃烧室应用的可行性,采用Mie散射和PLIF激光测量系统对其在高温高速环境中的雾化特性开展了研究。获得了在不同来流温度、来流马赫数以及燃油流量条件下燃油轨迹变化规律、蒸发距离及气液两相分布特性,并拟合了穿透深度经验公式。试验结果表明:在来流温度850~1 250 K,马赫数为0.15~0.35,燃油流量6~14 g/s的工况下,(1)温度升高,燃油穿透深度减小,蒸发距离变短;(2)马赫数增加,燃油穿透深度减小,蒸发距离变长;(3)燃油流量增加,燃油穿透深度增加,对蒸发距离影响较小;(4)气相燃油分布区约为液相的6倍。 展开更多
关键词 加力燃烧室 扇形喷嘴 横向射流 航空煤油 雾化特性
下载PDF
航空煤油热物理特性实验研究
6
作者 荣友战 汪飞 +3 位作者 金浩 侯林彤 杨猛 许晶禹 《计量学报》 CSCD 北大核心 2024年第4期533-539,共7页
针对广泛应用于飞机发动机的碳氢燃料,开展了-10℃~40℃温度区间内的热物理特性参数实验研究。以某检定中心提供的航空煤油作为样品,测试了其在不同温度下的密度、黏度、压缩系数和膨胀系数。研究结果显示,航空煤油黏度和压缩系数与温... 针对广泛应用于飞机发动机的碳氢燃料,开展了-10℃~40℃温度区间内的热物理特性参数实验研究。以某检定中心提供的航空煤油作为样品,测试了其在不同温度下的密度、黏度、压缩系数和膨胀系数。研究结果显示,航空煤油黏度和压缩系数与温度呈正相关,而密度与温度呈负相关,并且随着温度的增大,航空煤油膨胀系数表现为先减小后增大的趋势。在此基础上,结合标准温度下各参数的测量结果提出了密度、黏度、压缩系数和膨胀系数随温度变化的数学预测模型。研究对于航空煤油密度、黏温关系的预测误差在10%以内,而膨胀系数预测模型有待进一步完善。 展开更多
关键词 热物性测量 航空煤油 预测模型 体积管检定
下载PDF
RP-3航空煤油/O_(2)预混火焰不稳定性研究
7
作者 王恩庆 饶大为 +3 位作者 刘晓振 王鹏 刘宇 曾文 《滨州学院学报》 2024年第2期13-21,共9页
为获得RP-3航空煤油不稳定燃烧特性,采用定容燃烧实验装置开展初始压力0.1 MPa、0.2 MPa、0.3 MPa,初始温度420 K、450 K、480 K,当量比1.0~1.7工况下RP 3航空煤油/O_(2)预混火焰层流燃烧特性的实验研究。结果表明:随着初始压力和当量... 为获得RP-3航空煤油不稳定燃烧特性,采用定容燃烧实验装置开展初始压力0.1 MPa、0.2 MPa、0.3 MPa,初始温度420 K、450 K、480 K,当量比1.0~1.7工况下RP 3航空煤油/O_(2)预混火焰层流燃烧特性的实验研究。结果表明:随着初始压力和当量比增加,火焰锋面明显由光滑变为褶皱,内部出现胞状结构,火焰趋于不稳定。通过分析过渡加速起始半径发现,随着初始温度、初始压力和当量比增加,过渡加速起始半径减小,预混火焰的不稳定现象提前。另外,计算扰动增长率并分析其对火焰稳定性的影响发现,质热扩散作用对火焰稳定性的影响占据主导地位,流体动力学作用其次。进一步研究发现,质热扩散作用主要取决于分子扩散项,随着当量比增加,其值由负向正变化,证明分子扩散作用对预混火焰不稳定影响逐渐增强。 展开更多
关键词 RP-3航空煤油 不稳定燃烧 过渡加速起始半径 质热扩散作用 流体动力学作用
下载PDF
飞机撞击安全壳燃油泄漏燃烧数值模拟研究
8
作者 王友刚 孙运轮 张君鸿 《安全与环境学报》 CAS CSCD 北大核心 2024年第2期530-537,共8页
为研究飞机撞击核电厂安全壳后引发燃烧对安全壳的影响,采用Fluent模拟了航空煤油替代燃料在安全壳内部和外部的燃烧过程,分析了安全壳不同位置处的火焰温度变化情况。结果表明,在开始阶段,燃油泄漏时间比较短,燃油缓慢蒸发汽化,燃烧发... 为研究飞机撞击核电厂安全壳后引发燃烧对安全壳的影响,采用Fluent模拟了航空煤油替代燃料在安全壳内部和外部的燃烧过程,分析了安全壳不同位置处的火焰温度变化情况。结果表明,在开始阶段,燃油泄漏时间比较短,燃油缓慢蒸发汽化,燃烧发展过程以扩散蔓延为主,高温区域主要分布在安全壳侧壁面和底面。随着时间推移,液面蒸发速度加快,火焰高度呈现纵向发展的态势,最后在顶部形成较为均匀的温度场。安全壳内部燃烧最高温度可以达到2229 K,外部燃烧最高温度为1308 K。此外,撞击位置越高,安全壳顶部会越早出现高温区域,而较低位置处由于液池的堆积缓慢,燃油蒸发速率低,温度上升相对较慢。区别于内部燃烧,外部燃烧火焰不会波及安全壳顶部中心位置。 展开更多
关键词 安全工程 飞机撞击 安全壳 航空煤油 数值模拟
下载PDF
高温高压环境下RP-3航空煤油单液滴的加热与蒸发特性研究
9
作者 印晶 梁勇 +3 位作者 张龙飞 薛书勤 刘兵 周致富 《航空科学技术》 2024年第3期55-69,共15页
RP-3航空煤油是当前国内最常用的商用喷气燃料,煤油液滴在航空发动机燃烧室中的蒸发直接影响燃料的雾化效果、空燃混合气的形成和燃烧质量。本文以单个RP-3航空煤油液滴为研究对象,选取正十二烷、2,5-二甲基己烷、甲苯作为替代燃料,提... RP-3航空煤油是当前国内最常用的商用喷气燃料,煤油液滴在航空发动机燃烧室中的蒸发直接影响燃料的雾化效果、空燃混合气的形成和燃烧质量。本文以单个RP-3航空煤油液滴为研究对象,选取正十二烷、2,5-二甲基己烷、甲苯作为替代燃料,提出了一个考虑自然对流效应的高温高压环境下多组分液滴蒸发模型。利用自主搭建的试验装置得到了环境压力为1MPa、环境温度为473~673K下RP-3煤油单液滴在蒸发过程中的液滴直径变化。模型预测结果与试验结果的对比验证了模型的准确性。通过模型预测了不同环境参数下三组分替代物液滴直径、内部温度分布、各组分质量分数分布和液滴寿命等参数的瞬态变化,定量分析了不同高温条件下环境压力对单液滴蒸发特性的影响。结果表明,液相内部的传热传质会影响多组分液滴的蒸发速率,且液相扩散阻力造成了液相内部组分质量分数与温度空间分布的不均匀性。环境压力对RP-3煤油液滴蒸发寿命的影响随环境温度的变化而变化。当环境温度低于正十二烷的临界温度(658.25K)时,液滴寿命与环境压力的关系不是单调的,液滴寿命随环境压力的增加先增后减;而当环境温度超过658.25K时,液滴寿命随环境压力的升高而单调减小。这是因为在高温高压环境中,环境压力的升高能显著增大自然对流传热传质强度,而自然对流超过一定强度时,能明显促进液滴蒸发。上述研究有利于认识液滴内部组分扩散过程,从源头上为未来高性能低污染发动机的优化设计提供依据与参考。 展开更多
关键词 单液滴蒸发 航空发动机 自然对流 RP-3航空煤油 三组分替代
下载PDF
增产航空煤油的优化措施
10
作者 赵志飞 《石化技术与应用》 CAS 2024年第4期274-278,共5页
为了提高航空煤油(以下简称航煤)产量,对中国石油华北石化公司航煤生产状况及存在问题进行了分析,并在现有装置基础上,采取了优化常减压装置原油品种,拓宽航煤馏分,增加加氢裂化原料,级配多产航煤催化剂等措施。结果表明:通过采取以上... 为了提高航空煤油(以下简称航煤)产量,对中国石油华北石化公司航煤生产状况及存在问题进行了分析,并在现有装置基础上,采取了优化常减压装置原油品种,拓宽航煤馏分,增加加氢裂化原料,级配多产航煤催化剂等措施。结果表明:通过采取以上优化措施后,直馏航煤收率由4.37%提高至9.72%;加氢裂化装置负荷由55%提升至80%,加氢裂化航煤收率由33%提高至48%,总航煤产量增加97万t/a,汽柴油产量减少90万t/a。 展开更多
关键词 航空煤油 常减压 加氢裂化 馏程 催化剂
下载PDF
国产加氢催化剂HYT-6319及HC-185 LT/HC-53 LT的工业应用
11
作者 康海南 朱赫礼 罗毅 《石化技术与应用》 CAS 2024年第2期129-133,共5页
在中国石油广东石化公司370万t/a加氢裂化装置中,以中质减压蜡油和重芳烃的混合油(二者质量比97∶3)为原料,使用经UOP公司授权由中国石油抚顺石化公司生产的加氢精制催化剂HYT-6319和加氢裂化催化剂HC-185 LT/HC-53 LT进行了工业应用,... 在中国石油广东石化公司370万t/a加氢裂化装置中,以中质减压蜡油和重芳烃的混合油(二者质量比97∶3)为原料,使用经UOP公司授权由中国石油抚顺石化公司生产的加氢精制催化剂HYT-6319和加氢裂化催化剂HC-185 LT/HC-53 LT进行了工业应用,考察了催化剂运行情况、产品性质及其分布。结果表明:在催化剂运行中,一段精制、一段裂化、二段裂化反应器各床层入口平均温度依次比设计值低23.5~38.7,22.8~25.0,34.3~44.9℃,一段精制反应器床层平均温升比设计值低10.1℃,一段裂化、二段裂化反应器床层平均温升比设计值分别高3.4,3.6℃;柴油和航空煤油产品均满足国Ⅵ标准,重石脑油含硫(氮)量均小于0.5μg/g,是优质的重整装置原料,轻石脑油含硫量为2.8μg/g,是优质的乙烯裂解原料;主要产品重石脑油、航空煤油、轻石脑油、柴油的收率依次为48.62%,25.28%,5.47%,14.14%,产品总收率为93.51%,比设计值高0.04个百分点。 展开更多
关键词 加氢裂化 加氢精制 催化剂 柴油 航空煤油 重石脑油 收率
下载PDF
蜡油加氢裂化装置生产工业粗白油的工艺优化
12
作者 张华阳 杨志和 李景耀 《石化技术与应用》 CAS 2024年第2期121-124,共4页
在中国石油云南石化有限公司210万t/a蜡油加氢裂化装置上,通过采取提高反应器床层温度,优化产品馏分,升高航空煤油(航煤)和柴油闪点等措施,生产出工业粗白油产品。结果表明:装置工艺操作参数优化后,生产的柴油达到5号粗白油标准,航煤除... 在中国石油云南石化有限公司210万t/a蜡油加氢裂化装置上,通过采取提高反应器床层温度,优化产品馏分,升高航空煤油(航煤)和柴油闪点等措施,生产出工业粗白油产品。结果表明:装置工艺操作参数优化后,生产的柴油达到5号粗白油标准,航煤除芳烃质量分数外,其他达到3号粗白油标准,但航煤、柴油、粗白油原料的总收率降低5.33个百分点;高温能够促进多环芳烃加氢反应的进行,有利于改善产品油的颜色;航煤中轻馏分含芳烃质量分数最高;提高分馏塔塔顶温度和航煤塔塔底温度,增加柴油塔汽提蒸汽量后,航煤和柴油的闪点分别由48,91℃升高至69,125℃;投用柴油脱水装置后,柴油含水量仅为85μg/g。 展开更多
关键词 蜡油加氢裂化 航空煤油 柴油 粗白油 反应器 分馏塔 闪点
下载PDF
3号喷气燃料储运过程中的质量管理
13
作者 王向阳 周德文 摆军 《化工管理》 2024年第19期5-7,20,共4页
3号喷气燃料作为喷气式飞机的燃料,国家标准对质量指标要求很高。燃料从企业生产到飞机使用,中间要经过储运与运输环节,但燃料储运过程中难免会对油品造成污染,进而影响使用。因此,文中着重介绍了3号喷气燃料的常用储运方法,分析了影响... 3号喷气燃料作为喷气式飞机的燃料,国家标准对质量指标要求很高。燃料从企业生产到飞机使用,中间要经过储运与运输环节,但燃料储运过程中难免会对油品造成污染,进而影响使用。因此,文中着重介绍了3号喷气燃料的常用储运方法,分析了影响油品质量的主要污染因素,包括水污染、固体杂质、微生物和混合油等,最后有针对性地提出了保证油品质量安全的控制措施,旨在对3号喷气燃料及整个航空系统的安全维护起到一定的参考作用。 展开更多
关键词 3号喷气燃料 航空煤油 储运
下载PDF
Thermal cracking of aviation kerosene for scramjet applications 被引量:19
14
作者 ZHONG FengQuan FAN XueJun +1 位作者 YU Gong LI JianGuo 《Science China(Technological Sciences)》 SCIE EI CAS 2009年第9期2644-2652,共9页
Thermal cracking of China No.3 aviation kerosene was studied experimentally and analytically under supercritical conditions relevant to regenerative cooling system for Mach-6 scramjet applications. A two-stage heated ... Thermal cracking of China No.3 aviation kerosene was studied experimentally and analytically under supercritical conditions relevant to regenerative cooling system for Mach-6 scramjet applications. A two-stage heated tube system with cracked products collection/analysis was used and it can achieve a fuel temperature range of 700―1100 K,a pressure range of 3.5―4.5 MPa and a residence time of ap-proximately 0.5―1.3 s. Compositions of the cracked gaseous products and mass flow rate of the kerosene flow at varied temperatures and pressures were obtained experimentally. A one-step lumped model was developed with the cracked mixtures grouped into three categories:unreacted kerosene,gaseous products and residuals including liquid products and carbon deposits. Based on the model,fuel conversion on the mass basis,the reaction rate and the residence time were estimated as functions of temperature. Meanwhile,a sonic nozzle was used for the control of the mass flow rate of the cracked kerosene,and correlation of the mass flow rate gives a good agreement with the measurements. 展开更多
关键词 THERMAL CRACKING aviation kerosene lumped model SCRAMJET APPLICATIONS
原文传递
Effect of dicarboxylic acid esters on the lubricity of aviation kerosene for use in CI engines 被引量:10
15
作者 G.ANASTOPOULOS S.KALLIGEROS +1 位作者 P.SCHINAS F.ZANNIKOS 《Friction》 SCIE EI CAS 2013年第3期271-278,共8页
To reduce their fuel related logistic burden,North Atlantic Treaty Organization(NATO)Armed Forces are advancing the use of a single fuel for both aircraft and ground equipment.To this end,F-34(the commercial equivalen... To reduce their fuel related logistic burden,North Atlantic Treaty Organization(NATO)Armed Forces are advancing the use of a single fuel for both aircraft and ground equipment.To this end,F-34(the commercial equivalent is Jet A-1)is replacing distillate diesel fuel in many applications.However,tests conducted with this kerosene type on high frequency reciprocating rig showed that this type of fuel causes unacceptable wear.This excessive wear is caused by the poor lubricity of aviation fuel.In order to make this type of fuel compatible with direct injection compression engines,seven di-carboxylic acid esters have tested to improve the lubricity of kerosene.Tribological results showed that all esters tested in this series of experiments seem to be suitable for increasing the kerosene lubricity to a satisfactory level. 展开更多
关键词 LUBRICITY aviation kerosene F-34 Jet A-1 compression ignition(CI)engines dicarboxylic acid esters
原文传递
Numerical investigation on flow and convective heat transfer of aviation kerosene at supercritical conditions 被引量:12
16
作者 DANG GuoXin ZHONG FengQuan +1 位作者 CHEN LiHong CHANG XinYu 《Science China(Technological Sciences)》 SCIE EI CAS 2013年第2期416-422,共7页
In this paper,characteristics of flow and convective heat transfer of China RP-3 kerosene in straight circular pipe were numerically studied.Navier-Stokes equations were solved using RNG k-turbulence model with low Re... In this paper,characteristics of flow and convective heat transfer of China RP-3 kerosene in straight circular pipe were numerically studied.Navier-Stokes equations were solved using RNG k-turbulence model with low Reynolds number correction.The thermophysical and transport properties of the China RP-3 kerosene were calculated with a 10-species surrogate and the extended corresponding state method(ECS) combined with Benedict-Webb-Rubin equation.The independence of grids was first studied and the numerical results were then compared with experimental data for validation.Under flow conditions given in the paper,the results show that deterioration of convective heat transfer occurs when the wall temperature is slightly higher than the pseudo-critical temperature of kerosene for cases with wall heat flux of 1.2 and 0.8 MW/m 2.The degree of the heat transfer deterioration is weakened as the heat flux decreases.The deterioration,however,does not happen when the heat flux on the pipe wall is reduced to 0.5 MW/m 2.Based on the analysis of the near-wall turbulent properties,it is found that the heat transfer deterioration and then the enhancement are attributed partly to the change in the turbulent kinetic energy in the vicinity of pipe wall.The conventional heat transfer relations such as Sieder-Tate and Gnielinski formulas can be used for the estimation of kerosene heat convection under subcritical conditions,but they are not capable of predicting the phenomenon of heat transfer deterioration.The modified Bae-Kim formula can describe the heat transfer deterioration.In addition,the frictional drag would increase dramatically when the fuel transforms to the supercritical state. 展开更多
关键词 航空煤油 超临界条件 对流换热 流动特性 NAVIER-STOKES方程 数值研究 传热恶化 超临界状态
原文传递
掺混比例对航空煤油/柴油的着火和碳烟排放影响
17
作者 王兆文 向林 +3 位作者 郎兵 李晓捷 王纪方 成晓北 《内燃机学报》 EI CAS CSCD 北大核心 2023年第2期113-122,共10页
航空煤油/柴油掺混作为一种典型的宽馏程燃料,具有提升着火能力、改善低温冷起动并对柴油机结构可靠性影响较小等潜在性能.基于电加热定容燃烧弹,耦合纹影法、广域低通化学发光法和高频背光消光法等光学诊断方法,研究了不同航空煤油掺... 航空煤油/柴油掺混作为一种典型的宽馏程燃料,具有提升着火能力、改善低温冷起动并对柴油机结构可靠性影响较小等潜在性能.基于电加热定容燃烧弹,耦合纹影法、广域低通化学发光法和高频背光消光法等光学诊断方法,研究了不同航空煤油掺混比例对航空煤油RP-3/柴油掺混燃油喷雾、着火和碳烟排放特性的影响.结果表明:在航空煤油中掺烧柴油,有利于提高掺混燃油的着火能力,但同时也会提高碳烟排放,产生明显的红外信号.随着柴油掺混比例的增加,冷态喷雾体积几乎没有变化,但在高温蒸发环境下,喷雾锥角及体积均略微下降.添加25%(体积分数)的柴油可明显缩短着火滞燃期,且碳烟面积和碳烟质量规律与纯煤油相近,随着柴油组分的进一步增加,碳烟面积和碳烟质量都相应明显增加.此外,掺混25%柴油的航空煤油掺混燃油,可大幅提高燃油的着火性能,且碳烟排放维持在较低水平;航空煤油中添加较少比例的柴油适合在航空发动机中使用,从而成为一种比纯航空煤油更有潜力的单一燃料. 展开更多
关键词 掺混燃料 航空煤油/柴油 喷雾 着火 碳烟
下载PDF
Jet-A表征燃料/乙醇掺混燃料层流燃烧特性研究
18
作者 何旭 江正晖 +4 位作者 桑正 刘泽昌 冯光远 杨青 蒋厚实 《北京理工大学学报》 EI CAS CSCD 北大核心 2023年第7期712-718,共7页
为了研究初始温度470 K、初始压力0.1 MPa下乙醇掺混对航空煤油层流火焰燃烧特性的影响,文中利用定容燃烧弹设备结合仿真进行对比分析。结果表明,乙醇的加入显著提升了航空煤油的层流火焰燃烧速度,但仿真结果与试验数据之间存在较大的偏... 为了研究初始温度470 K、初始压力0.1 MPa下乙醇掺混对航空煤油层流火焰燃烧特性的影响,文中利用定容燃烧弹设备结合仿真进行对比分析。结果表明,乙醇的加入显著提升了航空煤油的层流火焰燃烧速度,但仿真结果与试验数据之间存在较大的偏差,在低当量比时尤为严重,需进一步优化机理。在此基础上通过敏感性分析,发现对层流火焰燃烧速度影响较大的4个基元反应,通过对4个基元反应的参数进行调整,修改得到新模型,该模型与试验值存在较好的吻合度。 展开更多
关键词 航空煤油 乙醇 层流火焰燃烧速度 敏感性分析
下载PDF
二冲程点燃式航空煤油发动机燃油消耗率及氮氧化物排放特性分析
19
作者 刘国满 盛敬 +1 位作者 贝太学 刘锐 《机械设计与制造》 北大核心 2023年第3期203-206,211,共5页
针对某二冲程火花点火式活塞发动机燃烧航空煤油时燃油消耗率及氮氧化物排放特性的研究,采用GT-Power软件进行了数值模拟分析。首先建立了该发动机的整机模型,并利用发动机转速为6000r/min时的全负荷工况的缸内压力的数值模拟结果以及在... 针对某二冲程火花点火式活塞发动机燃烧航空煤油时燃油消耗率及氮氧化物排放特性的研究,采用GT-Power软件进行了数值模拟分析。首先建立了该发动机的整机模型,并利用发动机转速为6000r/min时的全负荷工况的缸内压力的数值模拟结果以及在3500r/min到6500r/min转速范围内的扭矩及功率等数值模拟结果分别跟试验数据进行对比分析,验证了GT-Power数值模拟计算模型的正确性。然后采用该模型对该发动机工作过程中的压缩比、空燃比、点火提前角、进气压力、进气温度等参数的变化对燃油消耗率以及氮氧化物生成量的影响进行了模拟计算。结果表明:在6000r/min工况下,压缩比增大使燃油消耗率降低,进气压力和进气温度增大均使得燃油消耗率升高,空燃比和点火提前角增大均使燃油消耗率呈现出先减小后增大的特点,燃油消耗率在空燃比为15.5和点火提前角为25°CA时出现了极值点;压缩比、进气压力、进气温度和点火提前角增大均使氮氧化物生成量增多,空燃比增大使得氮氧化物生成量出现了先增多后减少的现象,在空燃比为15.5时氮氧化物生成量达到峰值。 展开更多
关键词 航空煤油发动机 燃油消耗率 氮氧化物生成量 GT-POWER 数值模拟
下载PDF
加氢法改善航煤热氧化安定性及影响因素研究
20
作者 王勇 代萌 +3 位作者 徐大海 李坤鹏 李扬 牛世坤 《当代化工》 CAS 2023年第6期1359-1362,1409,共5页
采用加氢法可以改善航煤的动态热氧化安定性破点温度。以典型航煤为原料,通过中试评价进行工艺条件对航煤的动态热氧化安定性的影响研究。结果表明:当采用高活性加氢催化剂,体积空速5.0 h^(-1)时,反应压力4 MPa、反应温度260℃,或反应压... 采用加氢法可以改善航煤的动态热氧化安定性破点温度。以典型航煤为原料,通过中试评价进行工艺条件对航煤的动态热氧化安定性的影响研究。结果表明:当采用高活性加氢催化剂,体积空速5.0 h^(-1)时,反应压力4 MPa、反应温度260℃,或反应压力2 MPa、反应温度280℃,破点温度可以达到340℃以上。考察了航煤烃类组成、杂质质量分数对动态热氧化安定性的影响,其中双环芳烃和碱性氮(1,2,3,4-四氢喹啉)影响较大。考察了精制航煤外部储存条件对动态热氧化安定性的影响,储存过程中实际胶质的衰变也会引起动态热氧化安定性变差。 展开更多
关键词 航煤 动态热氧化安定性 加氢
下载PDF
上一页 1 2 20 下一页 到第
使用帮助 返回顶部