Biological stability in drinking water: a regression analysis of influencing factors

Some parameters, such as assimilable organic carbon(AOC), chloramine residual, water temperature, and water residence time, were measured in drinking water from distribution systems in a northern city of China. The measurement results illustrate that when chloramine residual is more than 0.3 mg/L or AOC content is below 50 μg/L, the biological stability of drinking water can be controlled. Both chloramine residual and AOC have a good relationship with Heterotrophic Plate Counts(HPC)(log value), the correlation coefficient was -0.64 and 0.33, respectively. By regression analysis of the survey data, a statistical equation is presented and it is concluded that disinfectant residual exerts the strongest influence on bacterial growth and AOC is a suitable index to assess the biological stability in the drinking water.

Phosphorus limitation on bacterial regrowth in drinking water

Assimilable organic carbon(AOC) test and bacterial regrowth potential(BRP) analysis were used to investigate the effect of phosphorus on bacterial regrowth in the drinking water that was made from some raw water taken from a reservoir located in northern China. It was shown that AOC of the drinking water samples increased by 43.9%—59.6% and BRP increased by 100%—235% when 50 μg/L PO 3- 4-P(as NaH 2PO 4) was added alone to the drinking water samples. This result was clear evidence of phosphorus limitation on bacteria regrowth in the drinking water. This investigation indicated the importance of phosphorus in ensuring biological stability of drinking water and offered a novel possible option to restrict microbial regrowth in drinking water distribution system by applying appropriate technologies to remove phosphorus efficiently from drinking water in China.

Improving Removal Efficiency of Organic Matters by Adding Phosphorus in Drinking Water Biofiltration Treatment

Objective To investigate phosphorus limitation and its effect on the removal efficiency of organic matters in drinking water biological treatment. Methods Bacterial growth potential (BGP) method and a pair of parallel pilot-scale biofilters were used for the two objectives, respectively. Results The addition of phosphorus could substantially increase the BGPs of the water samples and the effect was stronger than that of the addition of carbon. When nothing was added into the influents, both CODMn removals of the parallel biofilters (BF1 and BF2) were about 15%. When phosphate was added into its influent, BF1 performed a CODMn removal, 6.02 percentage points higher than the control filter (BF2) and its effluent had a higher biological stability. When the addition dose was <20μg. L-1, no phosphorus pollution would occur and there was a good linear relationship between the microbial utilization of phosphorus and the removal efficiency of organic matters. Conclusions Phosphorus was a limiting nutrient and its limitation was stronger than that of carbon. The addition of phosphate was a practical way to improve the removal efficiency of organic matters in drinking water biological treatment.

Using selenium-conjugated polyethylene glycol to enhance the stability of gold nanoparticles in biologically relevant samples

Using stabilizing agents to maintain the physicochemical properties of colloids in complex environments is crucial for their realworld applications. In this article, we describe how selenium-(Se-) terminated polyethylene glycol(PEG) can serve as a highaffinity stabilizing agent for gold nanoparticles(AuNPs). Compared to Au NPs modified with standard thiolated PEG(S-PEG),Se-PEG-coated Au NPs are much more stable under extreme conditions such as high/low pH, high salt content, and high temperatures. We demonstrate that the Se anchor can prevent the dissociation of PEG ligands from Au NP surfaces in living cells,where a higher concentration of biothiols is usually present. These results indicate that Se-PEG is an excellent stabilizing agent that may facilitate further studies on metal NPs for various complex and physiological systems.

Improvement of the assimilable organic carbon （AOC） analytical method for reclaimed water

Microbial growth is an issue of concern that may cause hygienic and aesthetic problems during the transportation and usage of reclaimed water. Assimilable organic carbon （AOC） is an important parameter which determines the heterotrophic bacterial growth potential of water. Pseudomonas fluorescens P17 and Spirillum sp. NOX are widely used to measure AOC in drinking water. The AOC values of various reclaimed water samples determined by P 17 and NOX were compared with those determined by the new strains isolated from reclaimed water in this study. It showed that the conventional test strains were not suitable for AOC measurement of reclaimed water in certain cases. In addition to P17 and NOX, Stenotrophomonas sp. Z J2, Pseudomonas saponi- phila G3 and Enterobacter sp. G6, were selected as test strains for AOC measurement of reclaimed water. Key aspects of the bioassay including inoculum cell density, incubation temperature, incubation time and the pH of samples were evaluated for the newly selected test strains. Higher inoculum density （104 CFU.mL-1） and higher incubation temperature （25℃） could reduce the time required for the tests. The AOC results of various collected samples showed the advantages of the method proposed based on those five strains in evaluating the biologic stability of reclaimed water.

Effect of different molecular weight organic components on the increase of microbial growth potential of secondary effluent by ozonation

Ozonation has been widely applied in advanced wastewater treatment. In this study, the effect of ozonation on assimilable organic carbon （AOC） levels in secondary effluents was investigated, and AOC variation of different molecular weight （MW） organic components was analyzed. Although the removal efflciencies were 47%-76% and 94%-100% for UV2s4 and color at ozone dosage of 10 mg/L, dissolved organic carbon （DOC） in secondary effluents was hardly removed by ozonation. The AOC levels increased by 70%-780% at an ozone dosage range of 1-10 mg/L. AOC increased significantly in the instantaneous ozone demand phase, and the increase in AOC was correlated to the decrease in UV254 during ozonation. The results of MW distribution showed that, ozonation led to the transformation of larger molecules into smaller ones, but the increase in low MW （〈1 kDa） fraction did not contribute much to AOC production. The change of high MW （〉100 kDa and 10-100 kDa） fractions itself during ozonation was the main reason for the increase of AOC levels. Furthermore, the oxidation of organic matters with high MWs （〉 100 kDa and 10-100 kDa） resulted in more AOC production than those with low MWs （1-10 kDa and 〈1 kDa）. The results indicated that removing large molecules in secondary effluents could limit the increase of AOC during ozonation.