Compatibility of Fly Ash and Slag from Circulating Fluidized Bed Boiler for Concrete Beam

The applications of fly ash and slag from circulating fluidized bed boiler were studied as mineral admixture and aggregate for steel reinforced concrete beam.The results show that the concrete beam with fly ash and slag from circulating fluidized bed boilers has a similar ultimate cracking load coefficient as the ordinary cement concrete and a higher bending moment limit.Under the same load,it has a smaller deformation than the ordinary concrete.

Effects of particle type on the particle fluidization and distribution in a liquid–solid circulating fluidized bed boiler

A liquid-solid circulating fluidized bed boiler is designed and built for visualization research by applying the fluidized bed heat transfer and fouling prevention technology to the water side of the boiler. Four types of engineering plastic particles with different physical properties are selected as the solid working media. The effect of particle types on the fluidization and distribution of particles in the boiler is investigated under different feedwater flow rates and amount of added particles by using the charge couple device image measurement and acquisition system. The results show that all kinds of particles can't be normally fluidized and accumulate in the drum at low amount of added particles and feedwater flow rate. The particles with great density and low sphericity are more likely to accumulate. The average solid holdup in the riser tubes increases with the increase in feedwater flow rate and the amount of added particles. The non-uniform degree of particle distribution in the riser tubes generally decreases with the increase in feedwater flow rate and the amount of added particles. The particles with small density and settling velocity have high average solid holdup in the riser tubes under close sphericity. In generally,the smaller the density and settling velocity, the more uniform the particle distribution in the riser tubes.Three-dimensional diagrams of the non-uniform degree of particle distribution in the riser tubes of the boiler are established.

Model prediction of the operating behavior of a circulating fluidized bed boiler

An improved mathematical model for a circulating fluidized bed (CFB) boiler based on the model developed earlier by the authors was applied to simulate the operation of a 12 MW CFB boiler. The influences of the excess air ratio, primary air ratio, coal particle size distribution, coal properties (ash content and volatile content) and Ca/S ratio on the boiler operation were analyzed. The results showed that the model simulation may be applied to the optimum design and economic operation of the CFB boiler.

Hardening Properties of Foamed Concrete with Circulating Fluidized Bed Boiler Ash, Blast Furnace Slag, and Desulfurization Gypsum as the Binder

Recently, a large amount of circulating fluidized bed boiler ash (CFBA) and desulfurization gypsum (DSG) has been produced, and it is essential to develop technology to utilize them. These materials have CaO and SO3, which are considered to be a stimulant for blast furnace slag (BFS). This study presents an experimental investigation of the compressive strength and heavy metal ions immobilization properties of cement-free materials comprising CFBA, BFS, and DSG. The feasibility of manufacturing foamed concrete using these materials was examined, and field test of foamed concrete was conducted. Experimentally, the flow, compressive strength, and heavy metal ions concentration were evaluated via inductively coupled plasma atomic emission spectroscopy (ICP-AES) of the paste and foamed concrete. The experimental investigation revealed the self-healing hardening ability of fluidized bed boiler ash. In addition, the compressive strength was increased with the increasing replacement rates of BFS and DSG in the CFBA paste, and the compressive strength of 14.6 - 17.2 MPa was recorded over 28 days of curing. From the result obtained, the feasibility of manufacturing foamed concrete with a foam volume of 120 L, incorporating the aforementioned materials, is confirmed. It was also found that after 28 days of age, a 7.9-MPa compressive strength of the foamed concrete was attained, and heavy metal ions elution in this foamed concrete was also significantly reduced. Therefore, CFBA, BFS, and DSG could be used as a binder for the foamed concrete.

Combustion characteristics of low-quality lignite for different bed material sphericities in a circulating fluidized bed boiler:A numerical study

This study delves into the combustion behavior of various lignite types within a circulating fluidized bed boiler(CFBB),with a primary focus on the impact of different bed material sphericity ratios(0.5,0.7,and 0.9).Utilizing bed material with a sphericity ratio of 0.9 sourced from theÇan power plant and verified through experimentation,the research reveals several key findings.Notably,furnace temperatures tended to rise with higher sphericity ratios,albeit with variations between lignite types,particularly highlighting the complexity of this relationship in the case of GLI-Tunçbilek lignite.Pressure levels in the combustion chamber remained consistent across different sphericity ratios,indicating minimal influence on pressure dynamics.Improved combustion efficiency,especially at the bottom of the boiler,was observed at lower sphericity levels(0.5 and 0.7)forÇan lignite,as reflected in CO_(2) mole fractions.While NO_(x) emissions generally decreased with lower sphericity,the sensitivity to sphericity varied by lignite type,with Ilgın lignite showcasing low NO_(x) but high SO_(2) emissions,underscoring the intricate interplay between lignite properties,sphericity,and emissions.Overall,this study advances our understanding of CFBB combustion dynamics,offering insights valuable for optimizing performance and emissions control,particularly in lignite-based power.

Development of a supercritical and an ultra-supercritical circulating fluidized bed boiler

The supercritical circulating fluidized bed(CFB)boiler,which combines the advantages of CFB combustion with low cost emission control and supercritical steam cycle with high efficiency of coal energy,is believed to be the future of CFB combustion technology.It is also of greatest importance for low rank coal utilization in China.Different from the supercritical pulverized coal boiler that has been developed more than 50 years,the supercritical CFB boiler is still a new one which requires further investigation.Without any precedentor engineering reference,Chinese researchers have con ducted fundamental research,development,design of the supercritical CFB boilers independently.The design theory and key technology for supercritical CFB boiler were proposed.Key components and novel structures were invented.The first 600 MWe supercritical CFB boiler and its auxiliaries were successfully developed and demonstrated in Baima Power Plant,Shenhua Group as well as the simulator,control technology,installation technology,commissioning technology,system integration and operation technology.Compared with the 460 MWe supercritical CFB in Poland,developed in the same period and the only other supercritical one of commercial running in the word beside Baima,the 600 MWe one in Baima has a better performance.Besides,supercritical CFB boilers of 350 MWe have been developed and widely commercialized in China.In this paper,the updated progress of 660 MWe ultra-supercritical CFB boilers under development is introduced.

Experimental Study on an On-Line Measurement of High Temperature Circulating Ash Flux in a Circulating Fluidized Bed Boiler

A new Kind of measuring method that may be used to measure high temperature circulating solid particles flux in a circulating fluidized bed boiler is studied in this paper. The measuring method is founded on the principle of thermal equilibrium. A series of cold tests and hot tests were carried to optimize the structure and collocation of water-cooling tubes and showed that the method had the advantage of simple, accurate, reliable and good applicability for on-line "usage in a circulating fluidized bed boiler.

超临界循环流化床锅炉深度调峰时水冷壁流动不稳定特性计算分析

针对深度调峰时超临界循环流化床锅炉水冷壁管道内的汽液两相流动不稳定问题,提出了一种适用于不同工况的频域法数学模型。通过对质量、能量、动量方程进行小扰动线性化后经拉普拉斯变换得到了用于描述管道内汽液流体流动稳定性的传递函数,通过图解奈奎斯特图的方法判断管内工质流动的稳定性。然后,通过该模型计算了某350 MW超临界循环流化床锅炉水冷壁管段的不稳定边界并研究了不同参数对流动不稳定特性的影响。计算结果表明:所选回路在20%和50%锅炉最大连续蒸发量负荷发生流动不稳定时,热负荷分别为76.09 kW·m^(-2)和113.52 kW·m^(-2),水冷壁管道流动稳定且安全;入口过冷度对临界热流密度的影响呈非单值性;增大质量流速使流体的进口和出口密度差减小,有利于流动的稳定;增大入口节流系数,可以抑制入口处流量的脉动,有利于流动的稳定;在不同的工况条件下,改变管段倾斜角度会对流动稳定性产生不同的影响。

燃煤锅炉改燃兰炭燃烧工艺及效益分析

兰炭因热值高、硫含量低的特点被广泛应用于散煤替代,燃煤锅炉改燃兰炭是实现资源合理利用、降低污染物排放和改善企业经济效益的有效途径。以河北某循环流化床锅炉改燃兰炭工程为例,燃烧系统采用掺烧灰渣的方法,解决改燃后机械未完全燃烧导致损失大和物料循环不稳定问题,确定了兰炭和灰渣的最佳掺混比为9∶1;配风系统采用控制总量并降低一次风率的方法,解决兰炭着火困难的问题,确定了最佳一次风比例为55%;换热系统采用增加锅炉尾部受热面的方法,解决因燃料热值提升较大产生的蒸汽超温和锅炉效率下降问题。改燃扩容后锅炉烟尘、SO2和NOx排放分别比原锅炉降低了73%、94%和55%,以原锅炉35 t/h的额定功率运行,每小时节约燃料成本5.51%,产吨蒸汽所需燃料成本降低6.47元。

超超临界循环流化床锅炉技术研发进展

随着技术进步和对节能减排需求的提升,更先进的超超临界循环流化床(circulating fluidized bed,CFB)锅炉技术成为行业发展趋势。该文探讨了超超临界CFB锅炉技术的设计理念,包括流态化燃烧、水动力系统、污染物控制及系统集成等关键技术。分析大尺寸炉膛内流态化燃烧的均匀性和燃尽性问题,探讨了不同炉型燃烧系统设计;研究超超临界压力下低质量流速垂直管圈水动力系统的设计方案;提出在大截面和高炉膛条件下污染物控制的设计思路;通过对锅炉燃烧技术、热力系统及辅助系统的耦合特性分析,指出燃烧侧与蒸汽侧系统设计的优化方向。基于对关键技术的深入研究和超临界CFB锅炉的实践经验,形成了多种超超临界CFB技术方案,多个采用不同技术方案的项目已进入到工程应用阶段,其中可靠、灵活、清洁和高效是设计中的关键考量。期望这些多样化的超超临界CFB技术路线能够在未来发展中展现出灵活性和低碳优势。

基于TF-NGO算法的CFB锅炉床温系统建模研究

床温是循环流化床(CFB)锅炉重要的运行参数之一。针对床温耦合性强、干扰因素多、控制复杂的问题,亟需建立床温的数学模型,以实现床温控制,从而保证CFB锅炉安全、平稳地运行。为此,首先引入了混沌映射、切线飞行(TF)和柯西变异策略改进北方苍鹰优化(NGO)算法,并用实际工况的系统模型测试TF-NGO算法。测试结果表明,TF-NGO算法拥有更快的收敛速度和更高的寻优精度。其次,采集并预处理山西某电厂350 MW超临界CFB锅炉的现场运行数据。最后,采用TF-NGO算法对所建模型的参数进行辨识,并用实际工况数据进行模型验证。辨识和验证结果表明,由TF-NGO算法辨识的床温模型与实际输出拟合度高,能有效反映床温的动态特性,证明所建模型的有效性。该研究为后续对350 MW超临界CFB锅炉床温的优化控制研究奠定了基础。

240t/h循环流化床锅炉深度灵活调峰工程示范

煤电深度灵活调峰是促进可再生能源电力消纳、减少CO_(2)排放的重要举措。但燃煤锅炉深度灵活调峰存在负荷下调深度受限和NO_(x)排放高的技术难题。本文首次采用循环流化床耦合煤粉预热的技术路线,改建了现役240 t/h高温高压循环流化床锅炉,试验结果表明,锅炉负荷调节深度降低18%,且实现了零喷氨超低NO_(x)排放。240 t/h循环流化床锅炉深度灵活调峰工程示范的成功运行,为燃煤电站深度灵活调峰技术的发展提供了支撑。

330 MW循环流化床锅炉深度调峰技术

为推进“双碳”政策的实施,消纳波动性较强的新能源并网发电,当前对火电机组的深度调峰要求越来越高。循环流化床(circulating fluidized bed,CFB)锅炉机组在深度调峰低负荷运行工况有着先天优势,但实现20%以下的超低负荷运行依然面临众多的困难,如炉内流化的稳定性、氮氧化物的排放及炉内局部超温带来的安全性等问题。以某330 MW CFB锅炉的深度调峰技术应用为例,介绍了输煤筛分破碎系统、风帽节流圈、下二次风管等机组部件的改造,并配合烟气再循环等技术应用,成功实现了18%的超低负荷深度调峰运行,同时也很好地控制了NOx的排放。最后总结了CFB机组超低负荷深度调峰技术的关键点和难点,对深度调峰运行带来的潜在问题进行了分析,并提出了相应的解决措施。研究结果具有重要的工程借鉴作用。

超临界循环流化床锅炉水冷壁吸热偏差计算及深度调峰水动力特性

超临界循环流化床锅炉在深度调峰过程中受热负荷及质量流速变化的影响容易出现管壁拉裂、超温爆管等安全问题,故有必要对锅炉深度调峰负荷时热偏差系数、水动力特性进行计算研究。该文根据超临界循环流化床锅炉水冷壁及水冷屏结构,建立水动力计算数学模型并运用实炉测量数据计算实炉热偏差系数,对310及110MW负荷实炉热偏差系数进行计算,并采用110MW负荷实炉热偏差系数对120及70MW(深度调峰负荷)的水动力进行计算,将120MW负荷时的出口汽温计算结果与实炉测量数据进行对比验证,对70MW深度调峰负荷水动力计算结果进行分析。结果表明:循环流化床锅炉高低负荷时热偏差系数分布规律不同,在相近负荷时炉膛热偏差系数呈现出一致性,并且锅炉在70MW深度调峰负荷时,锅炉能安全稳定运行。深度调峰负荷时循环流化床锅炉吸热偏差系数及水动力特性的计算研究,为现有火电机组进行灵活性深度调峰优化改造提供一定的理论基础。

超临界660 MW循环流化床锅炉NO_(x)排放控制困难分析及处理

为解决某电厂超临界660 MW循环流化床(circulating fluidized bed,CFB)锅炉满负荷运行NO_(x)排放较难控制、瞬时值易超过超低排放限值且选择性非催化还原(selective non-catalytic reduction,SNCR)脱硝系统氨耗量较大氨逃逸严重的问题,现场进行了NO_(x)原始排放、SNCR脱硝效率、CO质量浓度及底渣可燃物的试验,并进行了二次风量布置优化试验。研究发现:锅炉原始NO_(x)排放较低,满负荷运行时不超过120 mg/m^(3)(标准状态,下同);中低负荷时NO_(x)质量浓度低于50 mg/m^(3),但炉膛前后NO_(x)质量浓度偏差较大,烟气中的NO_(x)主要在炉膛前部产生。NO_(x)排放较难控制的原因是SNCR脱硝效率较低和炉膛给煤不均。6台分离器入口的SNCR脱硝效率均低于50.0%,其中B、C、E、F 4台分离器脱硝效率低于40.0%。此外,从原始NO_(x)生成来看,根据炉膛深度方向上床温分布、底渣可燃物质量分数和CO质量浓度变化可以确定,炉膛给煤不均也对满负荷NO_(x)排放控制影响显著。当前,电厂若不进行给煤系统改造暂无法实现给煤均匀,但可以通过调整炉膛深度方向二次风量配比降低原始NO_(x)生成,降幅可达9.77%。

不带外置床的700 MW超超临界循环流化床锅炉失电后水冷壁安全计算分析

通过对某660 MW电厂失电事故过程中烟气温度、蒸汽温度及工质流量的变化规律进行分析,得到了炉膛密相区、过渡区及稀相区热负荷随时间的变化规律。在此基础上,以某700MW超超临界循环流化床(circulating fluidized bed,CFB)锅炉为对象,建立了失电事故发生后水冷壁内的流动传热计算模型,开发了以Fortran语言为基础的水冷壁内瞬态特性计算程序。分别对密相区、过渡区及稀相区进行分析,通过计算得到了失电后的水冷壁壁温及出口工质温度等热力参数的变化规律。计算结果表明:失电后水冷壁密相区出口的最高壁温为558.6℃,稀相区出口的最高壁温为579.6℃,不需要配备紧急补水泵来保证失电后水冷壁的安全。研究结果可为电厂处理超超临界CFB锅炉失电事故提供指导。

基于数据驱动660 MW循环流化床锅炉多目标燃烧优化

为降低某电厂循环流化床锅炉污染物排放,同时提高锅炉燃烧运行经济性,本文采用数据驱动技术实现循环流化床锅炉多目标燃烧优化。基于改进粒子群优化长短期记忆神经网络建立循环流化床锅炉NO_(x)/SO_(2)排放数学模型和锅炉排烟温度数学模型,以相对误差为预测性评估指标以确定最佳网络参数;其次,基于改进粒子群优化长短期记忆神经网络(IPSO-LSTM)、长短期记忆神经网络(LSTM)、广义回归神经网络(GRNN)和反向传播神经网络(BPNN)分别构建NO_(x)/SO_(2)排放数学模型和锅炉排烟温度数学模型,通过比较预测性评估指标,证明本文构建预测模型有效性;最后,基于非支配排序遗传算法(NSGA-Ⅱ)获取不同运行工况下循环流化床锅炉燃烧优化调整方案,以降低NO_(x)/SO_(2)排放浓度,同时维持排烟温度稳定性。结果表明:相比优化前,优化后NO_(x)排放浓度平均降低了10.58%,SO_(2)排放浓度平均降低了25.81%,最大降低了650 mg/m^(3),且排烟温度平均降低0.14%。

防磨梁与防磨格栅对循环流化床锅炉炉内传热的影响

循环流化床(circulating fluidized bed,CFB)锅炉普遍存在炉膛水冷壁磨损严重的问题。为提高运行可靠性,目前一般通过加装防磨梁或防磨格栅实现主动防磨,但该方式会引起流场变化,并对锅炉运行参数以及炉内传热造成影响。因此,建立循环流化床锅炉全炉膛水冷壁传热计算模型,提出加装防磨梁、防磨格栅后的边壁区颗粒浓度及传热面积修正系数计算方法,利用该模型对某440 t/h CFB锅炉炉内传热特性进行计算。结果显示:水冷壁加装防磨梁后,传热系数和传热能力有所下降,下降幅度和防磨梁数量有关,采用6道和12道防磨梁时,传热系数分别下降0.32%和2.89%,传热量分别下降3.28%和8.68%;比较而言,防磨格栅对炉内传热系数和传热能力影响较小,加装与防磨梁相同数量的防磨格栅时,表现出了一定的传热强化效果,传热量略有上升,当防磨格栅加装数量增加至30道时,传热系数下降5.76%,传热量上升1.59%。防磨格栅在降低水冷壁磨损的同时,对锅炉运行造成的影响较小,优于防磨梁。该模型可对CFB锅炉防磨技术的选用以及设计方案优化提供理论参考。

基于循环流化床燃烧的多元废弃物处理技术研究进展

随着我国经济的持续增长与居民生活品质的提升,工业生产过程中不可避免地产生了大量的固体废弃物、废气、废水,其有效管理与资源化利用成为亟待解决的问题.循环流化床(CFB)燃烧技术,凭借其高效能与环境友好的优势,在废弃物处理领域获得了广泛应用.作为一种先进的清洁燃烧技术,CFB技术展现了较好的燃料适应性、较低的污染物控制成本以及灵活的负荷调节能力,可显著促进废弃物的综合利用.介绍了CFB燃烧技术在固体废弃物、废气及废液处理中的多元化应用,涉及的关键点涵盖以下几方面:(1)固体废弃物处理.在垃圾焚烧方面,需重点关注空气平衡、燃烧温度及二次风等参数;煤炭加工副产物的处理,需重点关注床温控制、脱硫脱硝等过程;污泥处理方面需优化燃烧温度、控制飞灰碳含量及NOx排放;农林废弃物的燃烧需注重灰分含量、碱金属含量、燃料形态及含水率等因素可能造成的沾污、积灰、腐蚀或炉内结渣等问题.(2)废气处理.针对烧结烟气与化工尾气需注重燃烧温度、脱硫脱硝的优化策略,并针对化工尾气进行燃烧条件与尾气成分的分析与调控.(3)废液处理.对于有机废液与含盐污水,CFB燃烧技术提供了可行的处理路径,但需特别注意燃烧温度、添加剂种类与用量以及尾气净化措施的选择.CFB燃烧技术在废弃物处理领域展现出广阔的应用潜力,不仅有效减轻了环境污染,还促进了资源的循环利用.