In this paper, high density of dislocations, grain boundaries and nanometer-scale α precipitates were intro- duced to a metastable Ti-36Nb-5Zr alloy （wt%） through a thermo-mechanical approach including severe cold ...In this paper, high density of dislocations, grain boundaries and nanometer-scale α precipitates were intro- duced to a metastable Ti-36Nb-5Zr alloy （wt%） through a thermo-mechanical approach including severe cold rolling and short-time annealing treatment. The martensitic trans- formation was retarded, and the β phase with low content of β stabilizers was retained at room temperature after the thermo-mechanical treatment. As a result, both low mod- ulus （57 GPa） and high strength （950 MPa） are obtained. The results indicate that it is a feasible strategy to control martensitic transformation start temperature through microstructure optimization instead of composition design, with the aim of fabricating low modulus β-type Ti alloy.展开更多
基金financially supported by the National Natural Science Foundation of China (No.51601217)the Natural Science Foundation of Jiangsu Province (No.BK20160255)the Fundamental Research Funds for the Central Universities (No.2017QNA04)
文摘In this paper, high density of dislocations, grain boundaries and nanometer-scale α precipitates were intro- duced to a metastable Ti-36Nb-5Zr alloy （wt%） through a thermo-mechanical approach including severe cold rolling and short-time annealing treatment. The martensitic trans- formation was retarded, and the β phase with low content of β stabilizers was retained at room temperature after the thermo-mechanical treatment. As a result, both low mod- ulus （57 GPa） and high strength （950 MPa） are obtained. The results indicate that it is a feasible strategy to control martensitic transformation start temperature through microstructure optimization instead of composition design, with the aim of fabricating low modulus β-type Ti alloy.
