Friction and Wear Study on Friction Pairs with a Biomimetic Non-smooth Surface of 316L Relative to CF/PEEK under a Seawater Lubricated Condition

Current studies of a seawater axial piston pump mainly solve the problems of corrosion and wear in a slipper pair by selecting materials with corrosion resistance, self-lubrication, and wear resistance. In addition, an appropriate biomimetic non-smooth surface design for the slipper pair can further improve the tribological behavior. In this paper, 316 L stainless steel and CF/PEEK were selected to process the upper and bottom specimens, and the biomimetic non-smooth surface was introduced into the interface between the friction pair. The friction and wear tests were performed on a MMD-5 A tester at a rotation speed of 1000 r/min and load of 200 N under seawater lubricated condition. The results indicate that the main friction form of the smooth surface friction pair corresponds to abrasive wear and adhesive wear and that it exhibits a friction coe cient of 0.05–0.07, a specimen temperature of 56 ℃, a high wear rate, and surface roughness. Pits on the non-smooth surface friction pairs produced hydrodynamic lubrication and reduced abrasive wear, and thus the plowing e ect is their main friction form. The non-smooth surface friction pairs exhibit a friction coe cient of 0.03–0.04, a specimen temperature of 48 ℃, a low wear rate, and surface roughness. The study has important theoretical significance for enriching the lubrication, friction, and wear theory of a seawater axial piston pump, and economic significance and military significance for promoting the marine development and the national defense military.

Effects of Biomimetic Surface Designs on Furrow Opener Performance

The effects of biomimetic designs of tine furrow opener surface on equivalent pressure and pressure in the direction of motion on opener surface against soil were studied by finite element method (FEM) simulation and the effects of these designs on tool force and power requirements were examined experimentally.Geometrical structures of the cuticle surfaces of dung beetle (Copris ochus Motschulsky) were examined by stereoscopy.The structures of the cuticle surfaces and Ultra High Mo- lecular Weight Polyethylene (UHMWPE) material were modeled on surface of tine furrow opener as biomimetic designs.Seven furrow openers were analyzed in ANSYS program (a FEM simulation software).The biomimetic furrow opener surfaces with UHMWPE structures were found to have lower equivalent pressure and pressure in the direction of motion as compared to the conventional surface and to the biomimetic surfaces with textured steel-35 structures.It was found that the tool force and power were increased with the cutting depth and operating speed and the biomimetic furrow opener with UHMWPE tubular section ridges showed the lowest resistance and power requirement against soil..

Wetting Behaviours of a Single Droplet on Biomimetic Micro Structured Surfaces

Natural surfaces with super hydrophobic properties often have micro or hierarchical structures.In this paper, the wettingbehaviours of a single droplet on biomimetic micro structured surfaces with different roughness parameters are investigated.Atheoretical model is proposed to study wetting transitions.The results of theoretical analysis are compared with those of experimentindicating that the proposed model can effectively predict the wetting transition.Furthermore, a numerical simulationbased on the meso scale Lattice Boltzmann Method （LBM） is performed to study dynamic contact angles, contact lines, andlocal velocity fields for the case that a droplet displays on the micro structured surface.A spherical water droplet with r= 15 μmfalls down to a biomimetic square-post patterned surface under the force of gravity with an initial velocity of 0.01 m·sand aninitial vertical distance of 20 μm from droplet centre to the top of pots.In spite of a higher initial velocity, the droplet can stillstay in a Cassie state; moreover, it reaches an equilibrium state at t≈17.5 ms, when contact angle is 153.16° which is slightlylower than the prediction of Cassie-Baxter’s equation which gives θ=154.40°.

Effect of Thermal Fatigue Loading on Tensile Behavior of H13 Die Steel with Biomimetic Surface

Biomimetic surface is an effective ways to promote the performance grade and applied range of materials without alteringtheir substrate.Many improved properties such as resisting fatigue,enduring wear,etc,have been achieved by applyingbiomimetic morphology or structure to some engineering material surfaces.In this paper,aiming to reveal the relationshipbetween thermal cracking behavior and mechanical properties of engineering materials with biomimetic surface,biomimeticspecimens were fabricated using laser technique by imitating the heterogeneous structure on the surface of plant leaves.Theeffect of thermal fatigue cycling on the tensile properties of H13 die steel specimens with different surfaces (several types ofbiomimetic surfaces and a smooth surface) was compared and investigated.As a result,due to the coupling effects of themorphological features on the surface and the microstructure characteristics within unit zone,these specimens with biomimeticsurface exhibit remarkably enhanced Ultimate Tensile Strength (UTS) and 0.2% Yield Strength (YS) compared with referencespecimens while corresponding ductility remains largely unaffected even heightened,whether the thermal fatigue loads or not.The relative mechanisms leading to these improvements have been discussed.

Bacterial Surface Layer Proteins: From Moonlighting to Biomimetics: A New Horizonto Lead

The landmark discovery of moonlighting proteins embarks the significant progress in understanding the biological complexity and their closed-circuit analysis. The growing continuum in the variety of moonlighting functions paved the way for further elucidation of structural-functional aspects of protein evolution and design of proteins with novel functions. Currently, the moonlighting functions in various adhesive properties of surface layer proteins, an essential component of cell surface architecture of archaea and all phylogenetic groups of eubacteria become more prominently recognized. The remarkable credentials of surface layer proteins to self-assemble into supramolecular structures at nano-scale dimension have been exploited for the production of smart biomaterials in the form of biomimetics has been thrust area of research. The finely tuned topological features in terms of shape, size, geometry and surface chemistry of surface layer proteins are crucial for the production of biomimetics. The current developments of biomimetic lipid bilayers and composite membranes find applicability in understanding the functional dynamism of evolutionary relationship of bacterial cell envelopes and vaccine development, drug development and drug delivery. Though the development of biomimetics embraces fascination but faces with technological challenges. The plethora of literature has been available for the moonlighting aspects and nano-technological applications separately but none of the review describes towards the rhythmic transition from moonlighting functions of surface layer proteins of bacteria to biomimetics development and applications. Therefore, this review describes certain basic aspects of moonlighting functions and their mechanism of action, surface layer proteins and their moonlighting functions of commensal bacteria and their transition towards biomimetics. The recent developments of biomimetics based on surface layer proteins have been summarized and also posited different challenges and future prospects.

Design Principles of the Non-smooth Surface of Bionic Plow Moldboard

The diverse non-smooth body surfaces to reduce soil adhesion are the evolutional results for the soil animals to fit the adhesive and wet environment and can be used as a biological basis for the design of bionic plow moldboard. The model surfaces for bionic simulation should be taken from soil animal digging organs, on which the soil motion is similar to what is on the surface of moldboard. By analyzing the distribution of non-smooth units on the body surface of the ground beetle jaw and the soil moving stresses, the design principles of the bionic moldboard for the local and the whole moldboard were presented respectively. As well, the effect of soil moving speed on reducing adhesion, the dimensions relationship between soil particles and non-smooth convexes, the relationship between the enveloping surface of non-smooth convexes and the initial smooth surface of the plow body, and the convex types of the sphere coronal and the pangolin scales,etc.were discussed.

Non-Smooth Morphologies of Typical Plant Leaf Surfaces and Their Anti-Adhesion Effects

The micromorphologies of surfaces of several typical plant leaves were investigated by scanning electron microscopy（SEM）. Different non-smooth surface characteristics were described and classified. The hydrophobicity and anti-adhesion of non-smooth leaf surfaces were quantitatively measured. Results show that the morphology of epidermal cells and the morphology and distribution density of epicuticular wax directly affect the hydrophobicity and anti-adhesion. The surface with uniformly distributed convex units shows the best anti-adhesion, and the surface with regularly arranged trellis units displays better anti-adhesion. In contrast, the surface with randomly distributed hair units performs relatively bad anti-adheslon. The hydrophobic models of papilla-ciliary and fold-setal non-smooth surfaces were set up to determine the impacts of geometric parameters on the hydrophobicity. This study may provide an insight into surface machine molding and apparent morphology design for biomimetics engineering.

Effects of Methanol on Wettability of the Non-Smooth Surface on Butterfly Wing

The contact angles of distilled water and methanol solution on the wings of butterflies were determined by a visual contact angle measuring system. The scale structures of the wings were observed using scanning electron microscopy, The influence of the scale micro- and ultra-structure on the wettability was investigated. Results show that the contact angle of distilled water on the wing surfaces varies from 134.0° to 159.2°. High hydrophobicity is found in six species with contact angles greater than 150°. The wing surfaces of some species are not only hydrophobic but also resist the wetting by methanol solution with 55% concentration. Only two species in Parnassius can not resist the wetting because the micro-structure （spindle-like shape） and ultra-structure （pinnule-like shape） of the wing scales are remarkably different from that of other species. The concentration of methanol solution for the occurrence of spreading/wetting on the wing surfaces of different species varies from 70% to 95%. After wetting by methanol solution for 10 min, the distilled water contact angle on the wing surface increases by 0.8°-2.1°, showing the promotion of capacity against wetting by distilled water.

The Mechanism of Drag Reduction around Bodies of Revolution Using Bionic Non-Smooth Surfaces

Bionic non-smooth surfaces （BNSS） can reduce drag. Much attention has been paid to the mechanism of shear stress reduction by riblets. The mechanism of pressure force reduction by bionic non-smooth surfaces on bodies of revolution has not been well investigated. In this work CFD simulation has revealed the mechanism of drag reduction by BNSS, which may work in three ways. First, BNSS on bodies of revolution may lower the surface velocity of the medium, which prevents the sudden speed up of air on the cross section. So the bottom pressure of the model would not be disturbed sharply, resulting in less energy loss and drag reduction. Second, the magnitude of vorticity induced by the bionic model becomes smaller because, due to the sculpturing, the growth of tiny air bubbles is avoided. Thus the large moment of inertia induced by large air bubble is reduced. The reduction of the vorticity could reduce the dissipation of the eddy. So the pressure force could also be reduced. Third, the thickness of the momentum layer on the model becomes less which, according to the relationship between the drag coefficient and the momentum thickness, reduces drag.

Computer simulation of rolling wear on bionic non-smooth convex surfaces

The study of bionics has found that the skins of many burrow animals which live in soil and stone conditions have an anti wear function, and which is related to their body surfaces’non-smooth morphology. In the present study, bionic non-smooth surfaces are used in roll surface design, and roll models with convex non-smooth surfaces are developed. The rolling wear of non-smooth roll in steel rolling is simulated by the FEM software-ANSYS. The equivalent stress, the node friction stress, and the node contact pressure between the roll and the rolling piece are calculated; and the anti-wear mechanism is analyzed.

Influence of Non-smooth Surface on Tribological Properties of Glass Fiber-epoxy Resin Composite Sliding against Stainless Steel under Natural Seawater Lubrication

With the development of bionics, the bionic non-smooth surfaces are introduced to the field of tribology. Although non-smooth surface has been studied widely, the studies of non-smooth surface under the natural seawater lubrication are still very fewer, especially experimental research. The influences of smooth and non-smooth surface on the frictional properties of the glass fiber-epoxy resin composite（GF/EPR） coupled with stainless steel 316 L are investigated under natural seawater lubrication in this paper. The tested non-smooth surfaces include the surfaces with semi-spherical pits, the conical pits, the cone-cylinder combined pits, the cylindrical pits and through holes. The friction and wear tests are performed using a ring-on-disc test rig under 60 N load and 1000 r/min rotational speed. The tests results show that GF/EPR with bionic non-smooth surface has quite lower friction coefficient and better wear resistance than GF/EPR with smooth surface without pits. The average friction coefficient of GF/EPR with semi-spherical pits is 0.088, which shows the largest reduction is approximately 63.18% of GF/EPR with smooth surface. In addition, the wear debris on the worn surfaces of GF/EPR are observed by a confocal scanning laser microscope. It is shown that the primary wear mechanism is the abrasive wear. The research results provide some design parameters for non-smooth surface, and the experiment results can serve as a beneficial supplement to non-smooth surface study.

Numerical simulation of effect of bionic V-riblet non-smooth surface on tire anti-hydroplaning

Inspired by the idea that bionic non-smooth surfaces(BNSS) can reduce fluid adhesion and resistance, and the effect of bionic V-riblet non-smooth structure arranged in tire tread pattern grooves surface on anti-hydroplaning performance was investigated by using computational fluid dynamics(CFD). The physical model of the object(model of V-riblet surface distribution, hydroplaning model) and SST k-ω turbulence model were established for numerical analysis of tire hydroplaning. With the help of a orthogonal table L16(45), the parameters of V-riblet structure design compared to the smooth structure were analyzed, and obtained the priority level of the experimental factors as well as the best combination within the scope of the experiment. The simulation results show that V-riblet structure can reduce water flow resistance by disturbing the eddy movement in boundary layers. Then, the preferred type of V-riblet non-smooth structure was arranged on the bottom of tire grooves for hydroplaning performance analysis. The results show that bionic V-riblet non-smooth structure can effectively increase hydroplaning velocity and improve tire anti-hydroplaning performance. Bionic design of tire tread pattern grooves is a good way to promote anti-hydroplaning performance without increasing additional groove space, so that tire grip performance and roll noise are avoided due to grooves space enlargement.

Wettability of a Biomimetic Non-smooth Coating by Water

Through the evolution of hundreds of millions of years,the living creature have superior structure and function such as the structure of non-smooth surfaces have a well water-repellent,drag reduction,adhesion reduction functions.This study chose a kind of widely used material gray cast iron as substrate,which the metal and nano-ceramic nanocomposite coatings by electrodepositon on gray cast iron surface were prepared.The 2-D and 3-D surface morphologies of composite coating were observed and the result indicated that 2-D and 3-D had a typical geometrical non-smooth character.Furthermore,the contact angles of coating were measured.The relation between coating morphology and wettability was analysed.Therefore,the water-repellent of the composite coating surface was due to the characteristic microstructure and content of coating.

Recent Advances in Computational Simulation of Macro-,Meso-,and Micro-Scale Biomimetics Related Fluid Flow Problems

Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.

Numerical Modeling and Analysis of Grooved Surface Applied to Film Cooling

In order to improve the efficiency of film cooling, numerical investigation was carried out to study the effects of different film-cooled plates on surface heat transfer. Both grooved and non-grooved surfaces were concerned. The modeling was per- formed using Fluent software with the adoption of Shear-Stress Transport （SST） k-ωmodel as the turbulence closure. The coolant was supplied by a single film cooling hole with an inclination angle of 30°. The Mach numbers for the coolant flow and the mainstream flow were fixed at 0 and 0.6, respectively. At three blowing ratios of 0.5, 1.0 and 1.5, the aerodynamic behaviour of the mixing process as well as the heat transfer performance of the film cooling were presented. The numerical results were validated using experimental data extracted from a benchmark test. Good agreements between numerical results and the ex- perimental data were observed. For the film cooling efficiency, it shows that both local and laterally averaged cooling effectiveness can be improved by the non-smooth surface at different blowing ratios. Using the grooved surface, the turbulence intensity upon the plate can be reduced notably, and the mixing between the two flows is weakened due to the reduced turbu lence level. The results indicate that the cooling effectiveness of film cooling can be enhanced by applying the grooved surface.

A Study on Adhesive Properties of Materials Based on Biomimetic Results of Gecko′s Feet

Many animals have a magic ability to move or hold on ceilings and walls because of the design of their adhesive pads. The experiments were carried out to study the effects of material properties (elastic modulus EM and chemical components CC) and contact geometry (surface roughness, connecting stiffness) on their adhesive properties. The adhesion of the lowest EM samples is the highest (15 kPa) and the surface roughness has strong effects on adhesion and the adhesion decreases to 1.5 kPa for the highest EM samples. The adhesive forces are heavily influenced by CC of polyurethane. Surface roughness heavily influences the adhesion and when the roughness is higher than R a 0.3 μm, the obtained adhesion of the samples is the same. The adhesion does not change with the normal forces when a sphere is used to contact with flat PU samples. But when the two matually contact surfaces are flat, the adhesion of a material increases with the normal load at first and then turns to slightly raise. The adhesion of them is the same for the contact angles from 1 to 3 degree when the samples are softly connected. But when they are adhesive hardly to each other the adhesion decreases with increase of the contact angle.

A Review: Natural Superhydrophobic Surfaces and Applications

As the mimic biology becomes more and more important in the field of technology, superhydrophobic materials in the natural world have also become common. Superhydrophobic surfaces are used to prevent water droplets from wetting themselves which contain the micro- and nano-structures named hierarchical surfaces and exhibit the high water contact angles (WCA) that are greater than 150˚and perfect application foreground in both our daily lives and industry. In this work, we first discuss several surface properties and their numerical models. And then we list the surface properties of a variety of natural superhydrophobic surfaces and sum up their similarities and differences. The most recent strategies of how to apply natural superhydrophobic surfaces are also introduced within the past several years. In addition, we talk about the limitations of the current generation of superhydrophobic surfaces and prospects which looks for solutions to the problems. This review aims to enable researchers to learn more about the principles and mechanisms of superhydrophobicity and perceive the new methods for creating and modifying it.

A biomimetic basementmembrane consisted of hybrid aligned nanofibers andmicrofibers with immobilized collagen IV and laminin for rapid endothelialization

Rapid formation of a continuous endothelial cell(EC)monolayer with healthy endothelium function on the luminal surface of vascular implants is imperative to improve the longtime patency of small-diameter vascular implants.In the present study,we combined the contact guidance effects of aligned nanofibers,which enhance EC adhesion and proliferation because of its similar fiber scale with native vascular basement membranes,and aligned microfibers,which could induce EC elongation effectively and allow ECs infiltration.It was followed by successive immobilization of collagen IV and laminin to fabricate a biomimetic basement membrane(BBM)with structural and compositional biomimicry.The hemolysis assay and platelet adhesion results showed that the BBM exhibited excellent hemocompatibility.Meanwhile,the adhered human umbilical vein endothelial cells(HUVECs)onto theBBMaligned along the orientation of the microfibers with an elongated morphology,and the data demonstrated that the BBM showed favorable effects on EC attachment,proliferation,and viability.The oriented EC monolayer formed on the BBM exhibited improved antithrombotic capability as indicated by higher production of nitric oxide and prostacyclin(PGI2).Furthermore,fluorescence images indicated that HUVECs could infiltrate into the BBM,implying theBBM’s ability to enhance transmural endothelialization.Hence,theBBMpossessed the properties to regulate ECbehaviors and allow transmural ingrowth,demonstrating the potential to be applied as the luminal surface of small-diameter vascular implants for rapid endothelialization.

环氧树脂-水凝胶软硬复合表界面各向异性摩擦研究

由取向微结构引起的各向异性摩擦学是生物系统中最常见的引起摩擦形式之一.而研究表明,软硬复合的生物表界面在获取各向异性摩擦力时更具有优势.因此,本研究中以最典型的钩状倒刺微结构为研究对象,结合3D打印先进制造技术,通过在仿生取向微结构表界面原位复合低模量的水凝胶材料,获得环氧树脂-水凝胶软硬复合表界面.研究结果表明,水凝胶在Fe^(3+)溶液中的配位交联6 h时,其模量为3.6 MPa,相对于环氧树脂(模量为13.6 MPa)为软材料.在5 N载荷下,仿生表界面正方向摩擦力为1.64 N,反方向摩擦力为3.44 N,其各向异性摩擦力最大差值可达1.80 N.本研究中对软硬复合的生物表界面具有一定的理论指导意义,有望在智能摩擦调控和软体机器人等方面发挥一定的作用.

组织工程治疗股骨头坏死软骨下分离的适用技术

背景:股骨头坏死出现新月征是病情进程的“分水岭”,修复和稳定骨-软骨界面对阻止病情继续进展和预防股骨头塌陷尤为重要。利用组织工程学同步修复、整合骨-软骨界面具有潜在优势。目的:综述探讨解决股骨头坏死软骨下分离的潜在适宜技术。方法:检索1970年1月至2023年4月PubMed、Web of Science及中国知网、万方数据库中发表的相关文献,英文检索词:“Femoral head necrosis,Avascular necrosis of femoral head,Osteonecrosis of femoral head”等,中文检索词:“股骨头坏死,软骨下骨,软骨,软骨与软骨下骨整合”等,最终纳入114篇文献进行综述分析。结果与结论:①结构缺陷、缺血缺氧环境、炎症因素和应力集中可能造成股骨头坏死软骨下分离现象,软骨下骨分离会造成塌陷进展,并且可能与保髋手术失败相关,利用组织工程支架实现支架与骨-软骨界面的整合是治疗股骨头坏死软骨下分离的潜在方法之一。②目前的文献研究表明,多相、梯度支架和复合材料在促进骨、软骨细胞黏附与增殖,骨软骨基质的沉积方面均有提升,有助于支架与骨-软骨界面的整合,对治疗股骨头坏死软骨下分离有参考价值。③通过对支架表面进行修饰可以提高与界面整合的效率,但有各自不同的优缺点,提供不同环境的支架能够诱导同种间充质干细胞差异分化,有助于不同界面之间的整合。④未来有望应用于股骨头坏死软骨下分离的支架应为复合材料,具有梯度化和差异化的仿生结构,通过表面修饰和干细胞加载促进骨-软骨界面与支架的整合以实现治疗目的,但仍需进一步研究验证,而支架的降解速率与修复进度同步和不同界面之间的稳定性是未来需要解决的主要问题。