This paper presents a current-mode universal biquad employing only positive type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)...This paper presents a current-mode universal biquad employing only positive type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation results by PSPICE.展开更多
A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, ...A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.展开更多
In this paper, a biquad filter configuration based on two voltage differencing transconductance amplifiers (VDTAs) as newly active elements and only two capacitors as passive elements is proposed which can realize vol...In this paper, a biquad filter configuration based on two voltage differencing transconductance amplifiers (VDTAs) as newly active elements and only two capacitors as passive elements is proposed which can realize voltage-mode low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) filtering responses using three voltage inputs. Simultaneously, the same configuration can also be used to obtain LP, BP and HP filtering responses in transadmittance-mode. The proposed biquad is capable of providing electronic control of quality factor independent of pole frequency through single transconductance parameter (biasing current). It also offers the advantage of low active and passive sensitivity. To support the theoretical analysis, the PSPICE simulation of the proposed circuit is done using 0.18 μm CMOS technology from TSMC.展开更多
This paper presents an electronically tunable current/trans-impedance-mode biquad universal filter employing only single multi-output current controlled current conveyor trans-conductance amplifier (MO-CCCCTA) and two...This paper presents an electronically tunable current/trans-impedance-mode biquad universal filter employing only single multi-output current controlled current conveyor trans-conductance amplifier (MO-CCCCTA) and two grounded capacitors. The proposed filter realizes all the standard filter func-tions i.e. low pass (LP), band pass (BP) and high pass (HP), notch and all pass (AP) filters in the current form at high impedance output through appropriate selection of the input signals, without any matching conditions. Simultaneously, it can also realize all the standard filter functions in trans-impedance form from the same circuit topology. The circuit does not require inverting-type input current signal(s) and double input current signal(s) to realize all the responses in the design. The validity of proposed filter is verified through PSPICE simulations.展开更多
This article presents an active-only current-mode universal biquad filter performing three standard functions: low-pass, high-pass and band-pass function, which can be readily modified to achieve the rest functions (b...This article presents an active-only current-mode universal biquad filter performing three standard functions: low-pass, high-pass and band-pass function, which can be readily modified to achieve the rest functions (band-stop and all-pass). The circuit principle is based on active-only circuit designed by using differentiators which are constructed from current controlled current conveyor transconductance amplifier (CCCCTA) cooperating with an internally frequency compensated operational amplifier (OA). The features of the circuit are that: the pole frequency and quality factor can be independently tuned via the input bias currents and it is ideally temperature-insensitive, its circuit description is very simple, consisting of 3 CCCCTAs and 2 operational amplifiers, and the proposed circuit is very appropriate for further developing into integrated circuit architecture. The PSpice simulation results are shown. The given results agree well with the theoretical anticipation.展开更多
This paper presents a universal current-controlled current-mode biquad filter employing current controlled current conveyor trans-conductance amplifiers (CCCCTAs). The proposed filter employs only three MO- CCCCTAs an...This paper presents a universal current-controlled current-mode biquad filter employing current controlled current conveyor trans-conductance amplifiers (CCCCTAs). The proposed filter employs only three MO- CCCCTAs and two grounded capacitors. The proposed filter can simultaneously realize low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) responses in current form by choosing appropriate current output branches. In addition, the pole frequency and quality factor of the proposed filter circuit can be tuned independently and electronically over the wide range by adjusting the external bias currents. The circuit possesses low active and passive sensitivity performance. The validity of proposed filter is verified through PSPICE simulations.展开更多
This paper introduces a current-mode universal biquad circuit using only plus type CCs(current conveyors)(i.e.DVCCs(differential voltage current conveyors)and CCIIs(second generation current conveyors)).The circuit en...This paper introduces a current-mode universal biquad circuit using only plus type CCs(current conveyors)(i.e.DVCCs(differential voltage current conveyors)and CCIIs(second generation current conveyors)).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and/or addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation responses by PSPICE.展开更多
A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer ...A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.展开更多
In this manuscript we present a current mode biquad using one dual output-voltage differencing buffered amplifier (DO-VDBA) and four passive components (2 grounded capacitors and 2 resistors). The proposed circuit off...In this manuscript we present a current mode biquad using one dual output-voltage differencing buffered amplifier (DO-VDBA) and four passive components (2 grounded capacitors and 2 resistors). The proposed circuit offers very low active and passive sensitivity. The filter presented here is electronically tunable, frequency of oscillation (FO) can be tuned by controlling transconductance (gm) by varying the bias current (IB) of the circuit. The workability of proposed circuit is tested using PSPICE with 180 nm TSMC CMOS process parameters.展开更多
A switched capacitor biquad filter using current differencing transconductance amplifier (CDTA) is presented in this paper. The proposed circuit employs only one CDTA, two virtually grounded capacitors and one switche...A switched capacitor biquad filter using current differencing transconductance amplifier (CDTA) is presented in this paper. The proposed circuit employs only one CDTA, two virtually grounded capacitors and one switched capacitor. It is a resistorless circuit, so it is beneficial to IC implementation in terms of space consideration. The proposed circuit is a second order single input multiple output (SIMO) current-mode filter. This filter can simultaneously realize all basic filter functions high pass, low pass and band pass responses without any component-matching conditions. All the active and passive sensitivities are low. The natural angular frequency (ω0) and quality factor (Q) of proposed filter can be electronically controlled. Owing to current mode operation it consumes less power. PSPICE simulation results are used to verify the theoretical analysis.展开更多
A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filt...A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.展开更多
This paper presents a current processing current-tunable universal biquad filter employing two current conveyor transconductance amplifiers (CCTAs) as active element and two grounded capacitors as passive element. It ...This paper presents a current processing current-tunable universal biquad filter employing two current conveyor transconductance amplifiers (CCTAs) as active element and two grounded capacitors as passive element. It realizes all the five standard filtering responses such as low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) through appropriate selection of applied current inputs. Proposed circuit does not require minus input current signal and double input current signal to realize different filtering responses. It also does not require component matching condition to realize any filtering responses. Moreover, the circuit offers the advantage of orthogonal electronic tunability of pole-frequency and quality factor. The circuit exhibits low active and passive sensitivities. The circuit performance is verified through P-SPICE simulation software.展开更多
This paper presents a novel current-mode biquad using only plus type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by...This paper presents a novel current-mode biquad using only plus type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and/or addition of the circuit currents with no component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.An achievement example is given together with simulation results by PSPICE.展开更多
This paper proposes a new filter biquad circuit, which utilizes three Current Differencing Buffered Amplifiers (CDBA), two capacitors and five resistors, and operates in the trans-resistance mode. This multi-input and...This paper proposes a new filter biquad circuit, which utilizes three Current Differencing Buffered Amplifiers (CDBA), two capacitors and five resistors, and operates in the trans-resistance mode. This multi-input and single-output multifunction filter uses only grounded capacitors. All the employed resistors are either grounded or virtually grounded, which is an important parameter for its implementation as an integrated circuit. The circuit enjoys independent tunability of angular frequency and bandwidth. The 0.5 μm technology process parameters have been utilized to test and verify the performance characteristics of the circuit using PSPICE. The non-ideal analysis and sensitivity analysis, transient response, Monte-Carlo analysis and calculations of total harmonic distortion have also been shown.展开更多
文摘This paper presents a current-mode universal biquad employing only positive type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation results by PSPICE.
文摘A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.
文摘In this paper, a biquad filter configuration based on two voltage differencing transconductance amplifiers (VDTAs) as newly active elements and only two capacitors as passive elements is proposed which can realize voltage-mode low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) filtering responses using three voltage inputs. Simultaneously, the same configuration can also be used to obtain LP, BP and HP filtering responses in transadmittance-mode. The proposed biquad is capable of providing electronic control of quality factor independent of pole frequency through single transconductance parameter (biasing current). It also offers the advantage of low active and passive sensitivity. To support the theoretical analysis, the PSPICE simulation of the proposed circuit is done using 0.18 μm CMOS technology from TSMC.
文摘This paper presents an electronically tunable current/trans-impedance-mode biquad universal filter employing only single multi-output current controlled current conveyor trans-conductance amplifier (MO-CCCCTA) and two grounded capacitors. The proposed filter realizes all the standard filter func-tions i.e. low pass (LP), band pass (BP) and high pass (HP), notch and all pass (AP) filters in the current form at high impedance output through appropriate selection of the input signals, without any matching conditions. Simultaneously, it can also realize all the standard filter functions in trans-impedance form from the same circuit topology. The circuit does not require inverting-type input current signal(s) and double input current signal(s) to realize all the responses in the design. The validity of proposed filter is verified through PSPICE simulations.
文摘This article presents an active-only current-mode universal biquad filter performing three standard functions: low-pass, high-pass and band-pass function, which can be readily modified to achieve the rest functions (band-stop and all-pass). The circuit principle is based on active-only circuit designed by using differentiators which are constructed from current controlled current conveyor transconductance amplifier (CCCCTA) cooperating with an internally frequency compensated operational amplifier (OA). The features of the circuit are that: the pole frequency and quality factor can be independently tuned via the input bias currents and it is ideally temperature-insensitive, its circuit description is very simple, consisting of 3 CCCCTAs and 2 operational amplifiers, and the proposed circuit is very appropriate for further developing into integrated circuit architecture. The PSpice simulation results are shown. The given results agree well with the theoretical anticipation.
文摘This paper presents a universal current-controlled current-mode biquad filter employing current controlled current conveyor trans-conductance amplifiers (CCCCTAs). The proposed filter employs only three MO- CCCCTAs and two grounded capacitors. The proposed filter can simultaneously realize low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) responses in current form by choosing appropriate current output branches. In addition, the pole frequency and quality factor of the proposed filter circuit can be tuned independently and electronically over the wide range by adjusting the external bias currents. The circuit possesses low active and passive sensitivity performance. The validity of proposed filter is verified through PSPICE simulations.
文摘This paper introduces a current-mode universal biquad circuit using only plus type CCs(current conveyors)(i.e.DVCCs(differential voltage current conveyors)and CCIIs(second generation current conveyors)).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and/or addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation responses by PSPICE.
文摘A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.
文摘In this manuscript we present a current mode biquad using one dual output-voltage differencing buffered amplifier (DO-VDBA) and four passive components (2 grounded capacitors and 2 resistors). The proposed circuit offers very low active and passive sensitivity. The filter presented here is electronically tunable, frequency of oscillation (FO) can be tuned by controlling transconductance (gm) by varying the bias current (IB) of the circuit. The workability of proposed circuit is tested using PSPICE with 180 nm TSMC CMOS process parameters.
文摘A switched capacitor biquad filter using current differencing transconductance amplifier (CDTA) is presented in this paper. The proposed circuit employs only one CDTA, two virtually grounded capacitors and one switched capacitor. It is a resistorless circuit, so it is beneficial to IC implementation in terms of space consideration. The proposed circuit is a second order single input multiple output (SIMO) current-mode filter. This filter can simultaneously realize all basic filter functions high pass, low pass and band pass responses without any component-matching conditions. All the active and passive sensitivities are low. The natural angular frequency (ω0) and quality factor (Q) of proposed filter can be electronically controlled. Owing to current mode operation it consumes less power. PSPICE simulation results are used to verify the theoretical analysis.
文摘A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.
文摘This paper presents a current processing current-tunable universal biquad filter employing two current conveyor transconductance amplifiers (CCTAs) as active element and two grounded capacitors as passive element. It realizes all the five standard filtering responses such as low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) through appropriate selection of applied current inputs. Proposed circuit does not require minus input current signal and double input current signal to realize different filtering responses. It also does not require component matching condition to realize any filtering responses. Moreover, the circuit offers the advantage of orthogonal electronic tunability of pole-frequency and quality factor. The circuit exhibits low active and passive sensitivities. The circuit performance is verified through P-SPICE simulation software.
文摘This paper presents a novel current-mode biquad using only plus type DVCCs(differential voltage current conveyors).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and/or addition of the circuit currents with no component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.An achievement example is given together with simulation results by PSPICE.
文摘This paper proposes a new filter biquad circuit, which utilizes three Current Differencing Buffered Amplifiers (CDBA), two capacitors and five resistors, and operates in the trans-resistance mode. This multi-input and single-output multifunction filter uses only grounded capacitors. All the employed resistors are either grounded or virtually grounded, which is an important parameter for its implementation as an integrated circuit. The circuit enjoys independent tunability of angular frequency and bandwidth. The 0.5 μm technology process parameters have been utilized to test and verify the performance characteristics of the circuit using PSPICE. The non-ideal analysis and sensitivity analysis, transient response, Monte-Carlo analysis and calculations of total harmonic distortion have also been shown.