The symmetric deposition technique is often used to improve the uniformity of sculptured thin film （STF）. In this paper, optical properties of STF with the columnar angles 4-/3 are analyzed theoretically, based on t...The symmetric deposition technique is often used to improve the uniformity of sculptured thin film （STF）. In this paper, optical properties of STF with the columnar angles 4-/3 are analyzed theoretically, based on the characteristic matrix method for extraordinary waves. Then, the transmittances of uniformity monolayer and bilayer STF in symmetrical style are calculated to show the effect of the bilayer structure on the optical properties of STF. The inhomogeneity of STF is involved in analyzing the differences in transmittance and phase retardation between monolayer and bilayer STF deposited in symmetric style. The results show that optical homogeneity of STF can be improved by depositing in symmetric style at the normal incidence, but it is not the same case as the oblique incidence.展开更多
The disadvantages of Normally White Twisted Nematic Liquid Crystal Display (NW-TN-LCD) were discussed. The reason that the negative birefringent polyimide thin films were used to compensate NW-TN-LCD to decrease off-a...The disadvantages of Normally White Twisted Nematic Liquid Crystal Display (NW-TN-LCD) were discussed. The reason that the negative birefringent polyimide thin films were used to compensate NW-TN-LCD to decrease off-axis leakage, improve contrast ratios and enlarge viewing angles was explained in this paper. A certain polyimide thin film was taken as an example to show compensation effect on NW-TN-LCD.展开更多
A slanted columnar TiO2 sculptured anisotropic thin film （ATF） is prepared via the glancing angle deposition technique and used as the phase retardation plate. The tilted nanocolumn microstructures of thin film indu...A slanted columnar TiO2 sculptured anisotropic thin film （ATF） is prepared via the glancing angle deposition technique and used as the phase retardation plate. The tilted nanocolumn microstructures of thin film induce the optical anisotropy. With the biaxial birefringent model, the optical constants dispersion equations of TiO2 ATF are derived by fitting the transmittance spectra for s-and p-polarized waves measured at normal and oblique incidence within 400 nm–1200 nm. The phase shift of polarized light after reflection and/or transmission through the TiO2 ATF is analyzed with the characteristic matrix employing the extracted structure parameters. The theoretical studies reasonably well accord with the experimental results measured with spectroscopic ellipsometry. In addition, the dependences of the phase shift on the coating physical thickness and oblique incidence angle are also discussed. Birefringence of the biaxial ATF provides a sophisticated phase modulation by varying incidence angles over a broad range to have a wide-angle phase shift.展开更多
We report a high repetition frequency, high power stability and low laser noise laser-diode(LD) end-pumped Nd: YAG ceramic passively Q-switched laser at 1123 nm based on a Ti_(3)C_(2)T_(x)-polyvinyl alcohol(PVA) film ...We report a high repetition frequency, high power stability and low laser noise laser-diode(LD) end-pumped Nd: YAG ceramic passively Q-switched laser at 1123 nm based on a Ti_(3)C_(2)T_(x)-polyvinyl alcohol(PVA) film as a saturable absorber(SA). A Brewster polarizer(BP) and a birefringent crystal(BC) are incorporated to enable frequency selection and filtering for the passively Q-switched 1123 nm pulsed laser to improve the power stability and reduce the noise. When the pump power is 5.1 W, an average output power of 457.9 m W is obtained, corresponding to a repetition frequency of 1.09 MHz,a pulse width of 56 ns, a spectral line width of 0.65 nm, a power instability of ±0.92%, and a laser noise of 0.89%.The successful implementation of the “Ti_(3)C_(2)T_(x)-PVA film passively Q-switching” combined with “frequency selection and filtering of BP + BC” technology path provides a valuable reference for developing pulsed laser with high repetition frequency, high stability and low noise.展开更多
采用全矢量交替方向隐含迭代方法系统分析了高折射率 Si ON薄膜对 Si基 Si O2 阵列波导光栅中波导应力双折射的影响 .分析结果表明在芯区上或下表面沉积 Si ON薄膜可以明显减小 Si基 Si O2 阵列波导光栅 (AWG)中波导的应力双折射 ,但这...采用全矢量交替方向隐含迭代方法系统分析了高折射率 Si ON薄膜对 Si基 Si O2 阵列波导光栅中波导应力双折射的影响 .分析结果表明在芯区上或下表面沉积 Si ON薄膜可以明显减小 Si基 Si O2 阵列波导光栅 (AWG)中波导的应力双折射 ,但这两种补偿方法容易使模场偏移中心位置 ,不利于波导与光纤的耦合 .理想的补偿方法是在芯区上下同时补偿 ,可减小模场偏移 ,并用该方法设计了偏振无关的 1 6通道 AWG.展开更多
In general, the propagating behavior of extraordinary wave in anisotropic materials is different from that in isotropic materials. With the tangential continuity of Maxwell’s equations, the electromagnetic propagatin...In general, the propagating behavior of extraordinary wave in anisotropic materials is different from that in isotropic materials. With the tangential continuity of Maxwell’s equations, the electromagnetic propagating behaviors have been investigated at the incident and exit interfaces of the uniaxial anisotropic thin film. The emphasis was placed on two interesting optical phenomena such as homolateral refraction behavior and wide-angle Brewster’s phenomenon, which occurred at the interfaces of uniaxial anisotropic thin film.展开更多
In this paper, 2×2 characteristic matrices of uniaxially anisotropic thin film for extraordinary and ordinary wave are deduced at oblique incidence. Furthermore, the reflectance and transmittance of thin films ar...In this paper, 2×2 characteristic matrices of uniaxially anisotropic thin film for extraordinary and ordinary wave are deduced at oblique incidence. Furthermore, the reflectance and transmittance of thin films are calculated separately for two polarizations, which provide a new concept for designing non-polarizing thin films at oblique incidence. Besides, using the multilayer birefringent thin films, non-polarizing designs, such as beam splitter thin film at single wavelength, edge filter and antireflection thin film over visible spectral region are obtained at oblique incidence.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.61205211)
文摘The symmetric deposition technique is often used to improve the uniformity of sculptured thin film （STF）. In this paper, optical properties of STF with the columnar angles 4-/3 are analyzed theoretically, based on the characteristic matrix method for extraordinary waves. Then, the transmittances of uniformity monolayer and bilayer STF in symmetrical style are calculated to show the effect of the bilayer structure on the optical properties of STF. The inhomogeneity of STF is involved in analyzing the differences in transmittance and phase retardation between monolayer and bilayer STF deposited in symmetric style. The results show that optical homogeneity of STF can be improved by depositing in symmetric style at the normal incidence, but it is not the same case as the oblique incidence.
基金Supported by’94 Outstanding Young Scientist Foundation of NSFC
文摘The disadvantages of Normally White Twisted Nematic Liquid Crystal Display (NW-TN-LCD) were discussed. The reason that the negative birefringent polyimide thin films were used to compensate NW-TN-LCD to decrease off-axis leakage, improve contrast ratios and enlarge viewing angles was explained in this paper. A certain polyimide thin film was taken as an example to show compensation effect on NW-TN-LCD.
基金Project supported by the National Natural Science Foundation of China(Grant No.61205211)
文摘A slanted columnar TiO2 sculptured anisotropic thin film （ATF） is prepared via the glancing angle deposition technique and used as the phase retardation plate. The tilted nanocolumn microstructures of thin film induce the optical anisotropy. With the biaxial birefringent model, the optical constants dispersion equations of TiO2 ATF are derived by fitting the transmittance spectra for s-and p-polarized waves measured at normal and oblique incidence within 400 nm–1200 nm. The phase shift of polarized light after reflection and/or transmission through the TiO2 ATF is analyzed with the characteristic matrix employing the extracted structure parameters. The theoretical studies reasonably well accord with the experimental results measured with spectroscopic ellipsometry. In addition, the dependences of the phase shift on the coating physical thickness and oblique incidence angle are also discussed. Birefringence of the biaxial ATF provides a sophisticated phase modulation by varying incidence angles over a broad range to have a wide-angle phase shift.
基金Project supported by the Serving Local Special Project of Shaanxi Provincial Department of Education of China (Grant No. 19JC040)the National Natural Science Foundation of China (Grant No. 61905193)。
文摘We report a high repetition frequency, high power stability and low laser noise laser-diode(LD) end-pumped Nd: YAG ceramic passively Q-switched laser at 1123 nm based on a Ti_(3)C_(2)T_(x)-polyvinyl alcohol(PVA) film as a saturable absorber(SA). A Brewster polarizer(BP) and a birefringent crystal(BC) are incorporated to enable frequency selection and filtering for the passively Q-switched 1123 nm pulsed laser to improve the power stability and reduce the noise. When the pump power is 5.1 W, an average output power of 457.9 m W is obtained, corresponding to a repetition frequency of 1.09 MHz,a pulse width of 56 ns, a spectral line width of 0.65 nm, a power instability of ±0.92%, and a laser noise of 0.89%.The successful implementation of the “Ti_(3)C_(2)T_(x)-PVA film passively Q-switching” combined with “frequency selection and filtering of BP + BC” technology path provides a valuable reference for developing pulsed laser with high repetition frequency, high stability and low noise.
文摘In general, the propagating behavior of extraordinary wave in anisotropic materials is different from that in isotropic materials. With the tangential continuity of Maxwell’s equations, the electromagnetic propagating behaviors have been investigated at the incident and exit interfaces of the uniaxial anisotropic thin film. The emphasis was placed on two interesting optical phenomena such as homolateral refraction behavior and wide-angle Brewster’s phenomenon, which occurred at the interfaces of uniaxial anisotropic thin film.
文摘In this paper, 2×2 characteristic matrices of uniaxially anisotropic thin film for extraordinary and ordinary wave are deduced at oblique incidence. Furthermore, the reflectance and transmittance of thin films are calculated separately for two polarizations, which provide a new concept for designing non-polarizing thin films at oblique incidence. Besides, using the multilayer birefringent thin films, non-polarizing designs, such as beam splitter thin film at single wavelength, edge filter and antireflection thin film over visible spectral region are obtained at oblique incidence.
