Green Synthesis of New Tetra Schiff Bases and Bis-Azo Bis-Schiff Bases Derived from 2,6-Diaminopyridine as Promising Photosensitizers

Nine new tetra Schiff bases (M2 - M9) were prepared in moderate yields via the condensation of different aromatic amines and bis-Schiff base (M1) in microwave synthesizer. Also five new azo-Schiff bases (M16 - M20) were prepared by the condensation of (M1) with the azo-salicylaldehyde (M11 - M15) using the same method. The green synthesis by microwave irradiation was chosen as route due to its novelty, cleanliness, efficiency, time and solvent saving properties compared with the conventional methods which lack these advantages;such as time consume and wasting environment polluting organic solvents to achieve the same efficiency in synthesis. The prepared compounds which are believed by us to be competent as photosensitizers in photochemical systems were identified by IR and NMR spectroscopy besides elemental analysis.

Dioxygen Affinities and Biomimetic Catalytic Oxidation Performance of Transition-metal Complexes with Unsymmetrical Bis-Schiff Bases

The oxygenation constants and thermodynamic parameter (ΔHo, ΔSo) of Co (II) complexes with unsymmetrical bis-Schiff baeses were measured and their Mn(III) complexes as models of mimicking monooxygenase were employed to catalyze epoxidation of styrene. The effect of substituent R in a salicylidene of ML1~ML4 [ M = Co (II), Mn (III)Cl ] on the dioxygen affinities and biomimetic catalytic oxidation performance were also investigated. Among them, the MnL4Cl containing a pendant benzoaza crown ether ring showed highest conversion and selectiviy up to 54.9% and 96.9% respectively.

Homogenization Construction of Three-Level Teaching Bases for General Practice Medicine Under the Internet+Model

With the continuous expansion of medical student enrollment,the number of clinical teaching bases is gradually increasing.However,there are significant differences in clinical teaching management models and teaching levels among different bases.Most clinical teaching bases have incomplete teaching management systems,inadequate teaching management institutions,insufficient teaching personnel,and inadequate implementation of teaching rules and regulations.This article combines the construction practice of three-level clinical teaching base of the General Medicine College and the First Affiliated Hospital of Xi’an Medical University.We establish a standardized management system for the three-level clinical teaching base;implement a teaching supervision system and strengthen the monitoring of teaching quality;adopt multiple evaluations to test the effectiveness of clinical teaching implementation;explore the path of homogenization construction of teaching bases in terms of unified teacher training,promoting the development of teacher teaching abilities with equal quality and excellence,and providing a reference for improving the quality of medical talent training.

Physiological and molecular bases of the boron deficiency response in tomatoes

Boron is an essential microelement for plant growth.Tomato is one of the most cultivated fruits and vegetables in the world,and boron deficiency severely inhibits its yield and quality.However,the mechanism of tomato in response to boron deficiency remains largely unclear.Here,we investigated the physiological and molecular bases of the boron deficiency response in hydroponically grown tomato seedlings.Boron deficiency repressed the expression of genes associated with nitrogen metabolism,while it induced the expression of genes related to the pentose phosphate pathway,thereby altering carbon flow to provide energy for plants to cope with stress.Boron deficiency increased the accumulation of copper,manganese and iron,thereby maintaining chlorophyll content and photosynthetic efficiency at the early stage of stress.In addition,boron deficiency downregulated the expression of genes involved in cell wall organization and reduced the contents of pectin and cellulose in roots,ultimately retarding root growth.Furthermore,boron deficiency markedly altered phytohormone levels and signaling pathways in roots.The contents of jasmonic acid,jasmonoy1-L-isoleucine,trans-zeatin riboside,abscisic acid,salicylic acid,and SA glucoside were decreased;in contrast,the contents of isopentenyladenine riboside and ethylene precursor 1-aminocyclopropane-1-carboxylic acid were increased in the roots of boron-deficient tomato plants.These results collectively indicate that tomato roots reprogram carbon/nitrogen metabolism,alter cell wall components and modulate phytohormone pathways to survive boron deficiency.This study provides a theoretical basis for further elucidating the adaptive mechanism of tomato in response to boron deficiency.

Synthesis, Characterization and Biological Activity Evaluation of Schiff Bases Derived from 1,8-Diaminonaphtalène

The compounds have been synthesized and characterized by routine MS, IR and NMR spectrometry methods. The compounds are all active on bacterial strains with the exception of Salmonella typhimirium, with a MIC value of 7.5 mg/mL. They show a percentage of anti-radical activity of 75.476 ± 5.070 for the compound DAN-S and of 68.142 ± 6.539 for the compound DAN-OV. The compounds are sensitive to the two champions used. DAN-S compound is then the most active.

Solving the k-Independent Sets Problem of Graphs by Gröbner Bases

The aim of this paper is to given an algebraic computational method for finding maximal independent sets as well as the independent number of an arbitrary finite graph of n vertices G by strengthening the problem of finding maximal independent sets of G to the problem of finding k-independent sets in G for. It is shown that the existence of k-independent sets in G is equivalent to the existence of solutions of a system of multivariate polynomial equations. It follows that the problem of finding k-independent sets can be realized by using Gröbner bases of polynomial ideals. Since the number of k-independent sets is finite, the triangular equations composed by Gröbner bases are easier to be solved. Consequently, the maximal independent sets and the independent number of G are obtained after solving at most n such equations. Finally, the numerical example is presented to illustrate the effectiveness of this algebraic computational method.

Novel Mannich Bases of Benzimidazole Derivatives: An Antibacterial Study of Environmental Bacterial Strains

A previous study was conducted on the synthesis and antibacterial evaluation of Mannich bases of 2-(thioalkyl)-1H-methylbenzimidazole derivatives. The results of this study showed that certain 2-(thioalkyl)-1H-methylbenzimidazole and 2-(thioalkyl)-methyl-1-(piperidin-1-ylmethyl)benzimidazole derivatives possess antibacterial activities against clinical strains, such as Escherichia coli, Klebsiella pneumonia (Gram-negative bacteria), Staphylococcus aureus and Pseudomonas aeruginosa (Gram-positive bacteria). Following these favorable results, we extended the antibacterial evaluation of this series of molecules to environmental strains. The aim of this study was to assess the impact of the methyl-piperidine group fixed at position-1 of this new series of benzimidazoles on the antibacterial activity of environmental strains. In addition, we first evaluated the antibacterial activity of four 2-(thioalkyl)methylbenzimidazole derivatives and then that of five 2-(thioalkyl)-methyl-1-(piperidin-1-ylmethyl) benzimidazole derivatives. This study allowed us to show that compounds 1d and 1e could inhibit bacterial growth in vitro of the Enterobacteria P1 strain with inhibition diameters of 17.3 ± 0.6 mm and 10 ± 0.0 mm, respectively. However, addition of methyl-piperidinyl in this series showed that five (5) of 2-(thioalkyl)-methyl-1-(piperidin-1-ylmethyl) benzimidazole derivatives had an inhibitory effect on the in vitro growth of bacterial strains used except on Enterobacteria P2 with inhibition diameters between 10.0 ± 0.8 mm and 27.9 ± 1.4 mm. The introduction of the methyl-piperidinyl group at the 1-position of 2-(thioalkyl)-1H-methylbenzimidazole derivatives greatly improved the antibacterial activity against environmental bacteria such as Escherichia coli A1, A2, A3, and A4 and two Enterobacteria P1.

Discussion on Construction and Mechanism of Practice Bases for Professional Degree Postgraduates Based on the Integration of Production and Education in Local Universities

Under the background of emerging agricultural education,practice bases are an important place to train profession talented person that match social needs,so it is very important to build stable and long-term practice bases.At present,the main problems in the construction of practice bases for postgraduates in local colleges and universities are mainly focusing on construction and neglecting management,imperfect cooperation mechanism and lack of teaching management effectively.It is of great significance to build a long-term management mechanism to ensure the education quality of practice bases.Therefore,constructing the mode of"double integration and double promotion of production and education"with practice bases as the carrier and realizing the organic combination of industrial needs and postgraduate projects is an important idea for local colleges and universities to train professional degree postgraduates to"know agriculture,love agriculture,strengthen agriculture and promote agriculture",and it also provides a reference for the mechanism construction of postgraduate bases.

Prediction of Damping Capacity Demand in Seismic Base Isolators via Machine Learning

Base isolators used in buildings provide both a good acceleration reduction and structural vibration control structures.The base isolators may lose their damping capacity over time due to environmental or dynamic effects.This deterioration of them requires the determination of the maintenance and repair needs and is important for the long-termisolator life.In this study,an artificial intelligence prediction model has been developed to determine the damage and maintenance-repair requirements of isolators as a result of environmental effects and dynamic factors over time.With the developed model,the required damping capacity of the isolator structure was estimated and compared with the previously placed isolator capacity,and the decrease in the damping property was tried to be determined.For this purpose,a data set was created by collecting the behavior of structures with single degrees of freedom(SDOF),different stiffness,damping ratio and natural period isolated from the foundation under far fault earthquakes.The data is divided into 5 different damping classes varying between 10%and 50%.Machine learning model was trained in damping classes with the data on the structure’s response to random seismic vibrations.As a result of the isolator behavior under randomly selected earthquakes,the recorded motion and structural acceleration of the structure against any seismic vibration were examined,and the decrease in the damping capacity was estimated on a class basis.The performance loss of the isolators,which are separated according to their damping properties,has been tried to be determined,and the reductions in the amounts to be taken into account have been determined by class.In the developed prediction model,using various supervised machine learning classification algorithms,the classification algorithm providing the highest precision for the model has been decided.When the results are examined,it has been determined that the damping of the isolator structure with the machine learning method is predicted successfully at a level exceeding 96%,and it is an effective method in deciding whether there is a decrease in the damping capacity.

Role of micro-Ca/In alloying in tailoring the microstructural characteristics and discharge performance of dilute Mg-Bi-Sn-based alloys as anodes for Mg-air batteries

The influence of micro-Ca/In alloying on the microstructural charac teristics,electrochemical behaviors and discharge properties of extruded dilute Mg-0.5Bi-0.5Sn-based(wt.%)alloys as anodes for Mg-air batteries are evaluated.The grain size and texture intensity of the Mg-Bi-Sn-based alloys are significantly decreased after the Ca/In alloying,particularly for the In-containing alloy.Note that,in addition to nanoscale Mg_(3)Bi_(2)phase,a new microscale Mg_(2)Bi_(2)Ca phase forms in the Ca-containing alloy.The electrochemical test results demonstrate that Ca/In micro-alloying can enhance the electrochemical activity.Using In to alloy the Mg-Bi-Sn-based alloy is effective in restricting the cathodic hydrogen evolution(CHE)kinetics,leading to a low self-corrosion rate,while severe CHE occurred after Ca alloying.The micro-alloying of Ca/In to Mg-Bi-Sn-based alloy strongly deteriorates the compactness of discharge products film and mitigates the"chunk effect"(CE),hence the cell voltage,anodic efficiency as well as discharge capacity are greatly improved.The In-containing alloy exhibits outstanding discharge performance under the combined effect of the modified microstructure and discharge products,thus making it a potential anode material for primary Mg-air battery.

Prediction of Lubricant Physicochemical Properties Based on Gaussian Copula Data Expansion

The composition of base oils affects the performance of lubricants made from them.This paper proposes a hybrid model based on gradient-boosted decision tree(GBDT)to analyze the effect of different ratios of KN4010,PAO40,and PriEco3000 component in a composite base oil system on the performance of lubricants.The study was conducted under small laboratory sample conditions,and a data expansion method using the Gaussian Copula function was proposed to improve the prediction ability of the hybrid model.The study also compared four optimization algorithms,sticky mushroom algorithm(SMA),genetic algorithm(GA),whale optimization algorithm(WOA),and seagull optimization algorithm(SOA),to predict the kinematic viscosity at 40℃,kinematic viscosity at 100℃,viscosity index,and oxidation induction time performance of the lubricant.The results showed that the Gaussian Copula function data expansion method improved the prediction ability of the hybrid model in the case of small samples.The SOA-GBDT hybrid model had the fastest convergence speed for the samples and the best prediction effect,with determination coefficients(R^(2))for the four indicators of lubricants reaching 0.98,0.99,0.96 and 0.96,respectively.Thus,this model can significantly reduce the model’s prediction error and has good prediction ability.

Laboratory Evaluation of Performance Recovery of Aged SBS-modified Asphalt Using Regenerants with Different Base Oil Components

In this study,the regenerative effects of different regenerants on aged SBS-modified asphalt from different perspectives were investigated,including their conventional properties,viscoelastic behavior,creep-related properties,and micromorphology.Base oils composed of different proportions of aromatic and saturated hydrocarbons as well as the styrene-butadiene-styrene(SBS)restorer were used to prepare the regenerants.The results showed that the components of the base oil of the regenerant played a crucial role in determining the characteristics and performance of the recycled SBSmodified asphalt.Regenerants containing a high proportion of aromatics dissolved the hard segment in the SBS restorer,thereby delaying the effect of a reduction in the regenerants on the performance of the aged asphalts at a high temperature.Regenerants containing a high proportion of saturates dissolved the soft segment in the SBS restorer to enhance the lowtemperature performance of the recycled asphalts.In addition,the stress sensitivity of the recycled asphalts increased with the fraction of aromatics in the regenerant.As the aromatic content of the base oil components of the regenerants increased and their saturate content decreased,the state of dispersion of the SBS phase in the recycled SBS-modified asphalts improved.The optimal content of aromatics in the base oil of the regenerants should be set in the range of 33%to 47%to ensure the adequate performance of the recycled asphalts and a high efficiency of the SBS restorer.

RoBGP:A Chinese Nested Biomedical Named Entity Recognition Model Based on RoBERTa and Global Pointer

Named Entity Recognition(NER)stands as a fundamental task within the field of biomedical text mining,aiming to extract specific types of entities such as genes,proteins,and diseases from complex biomedical texts and categorize them into predefined entity types.This process can provide basic support for the automatic construction of knowledge bases.In contrast to general texts,biomedical texts frequently contain numerous nested entities and local dependencies among these entities,presenting significant challenges to prevailing NER models.To address these issues,we propose a novel Chinese nested biomedical NER model based on RoBERTa and Global Pointer(RoBGP).Our model initially utilizes the RoBERTa-wwm-ext-large pretrained language model to dynamically generate word-level initial vectors.It then incorporates a Bidirectional Long Short-Term Memory network for capturing bidirectional semantic information,effectively addressing the issue of long-distance dependencies.Furthermore,the Global Pointer model is employed to comprehensively recognize all nested entities in the text.We conduct extensive experiments on the Chinese medical dataset CMeEE and the results demonstrate the superior performance of RoBGP over several baseline models.This research confirms the effectiveness of RoBGP in Chinese biomedical NER,providing reliable technical support for biomedical information extraction and knowledge base construction.

Buckling Optimization of Curved Grid Stiffeners through the Level Set Based Density Method

Stiffened structures have great potential for improvingmechanical performance,and the study of their stability is of great interest.In this paper,the optimization of the critical buckling load factor for curved grid stiffeners is solved by using the level set based density method,where the shape and cross section(including thickness and width)of the stiffeners can be optimized simultaneously.The grid stiffeners are a combination ofmany single stiffenerswhich are projected by the corresponding level set functions.The thickness and width of each stiffener are designed to be independent variables in the projection applied to each level set function.Besides,the path of each single stiffener is described by the zero iso-contour of the level set function.All the single stiffeners are combined together by using the p-norm method to obtain the stiffener grid.The proposed method is validated by several numerical examples to optimize the critical buckling load factor.

Simulation of Haloxylon Ammodendron Stand Basic Diameter Structure Based on Fuzzy Distribution Function

Based on the investigation data of 12 Haloxylon ammodendron plots in the south edge of Gurbantunggut Desert, Fuzzy distribution was introduced into the study of Haloxylon ammodendron base diameter structure fitting according to the consistency between the characteristics of Fuzzy distribution function and the distribution series of cumulative percentage of stand base diameter, and the fitting precision and effect of Fuzzy distribution function were discussed. The root mean square error RMSE and determination coefficient R2 values showed that Fuzzy-Γ1, Fuzzy-Γ2, Fuzzy-Γ3, Fuzzy-Γ4 had good fitting performance, among which Fuzzy-Γ1 had relatively high fitting precision, and its parameters were closely related to stand age and density, Fuzzy-Γ2 distribution function was the second, and Fuzzy-Γ4 distribution function had the worst fitting effect. By introducing a parameter c from the similarity of four distribution function formulas, a generalized Fuzzy distribution function Fuzzy-Γ5 is obtained. This function shows the highest fitting accuracy. Most of the values of parameter c are near 1 or 2, which shows that the diameter distribution is mainly approximate to Fuzzy-Γ1 and Fuzzy-Γ2.

Are case reports valuable?Exploring their role in evidence based medicine and patient care

Case reports,often overlooked in evidence-based medicine(EBM),play a pivotal role in healthcare research.They provide unique insights into rare conditions,novel treatments,and adverse effects,serving as valuable educational tools and generating new hypothesis.Despite their limitations in generalizability,case reports contribute significantly to evidence-based practice by offering detailed clinical information and fostering critical thinking among healthcare professionals.By acknowledging their limitations and adhering to reporting guidelines,case reports can contribute significantly to medical knowledge and patient care within the evolving landscape of EBM.This editorial explores the intrinsic value of case reports in EBM and patient care.

Layer by Layer Self-assembly Fiber-based Flexible Electrochemical Transistor

Poly(3,4-ethylenedioxyethiophene)-polystyrene sulfonic acid(PEDOT:PSS)/polyallyl dimethyl ammonium chloride modified reduced graphene oxide(PDDA-rGO)was layer by layer self-assembled on the cotton fiber.The surface morphology and electric property was investigated.The results confirmed the dense membrane of PEDOT:PSS and the lamellar structure of PDDA-rGO on the fibers.It has excellent electrical conductivity and mechanical properties.The fiber based electrochemical transistor(FECTs)prepared by the composite conductive fiber has a maximum output current of 8.7 mA,a transconductance peak of 10 mS,an on time of 1.37 s,an off time of 1.6 s and excellent switching stability.Most importantly,the devices by layer by layer self-assembly technology opens a path for the true integration of organic electronics with traditional textile technologies and materials,laying the foundation for their later widespread application.

The Impact of Model Based Offset Scaling Technique on the Amplitude Variation with Offset Responses from 3D Seismic Data Acquired from the Tano Basin, Offshore Ghana

Amplitudes have been found to be a function of incident angle and offset. Hence data required to test for amplitude variation with angle or offset needs to have its amplitudes for all offsets preserved and not stacked. Amplitude Variation with Offset (AVO)/Amplitude Variation with Angle (AVA) is necessary to account for information in the offset/angle parameter (mode converted S-wave and P-wave velocities). Since amplitudes are a function of the converted S- and P-waves, it is important to investigate the dependence of amplitudes on the elastic (P- and S-waves) parameters from the seismic data. By modelling these effects for different reservoir fluids via fluid substitution, various AVO geobody classes present along the well and in the entire seismic cube can be observed. AVO analysis was performed on one test well (Well_1) and 3D pre-stack angle gathers from the Tano Basin. The analysis involves creating a synthetic model to infer the effect of offset scaling techniques on amplitude responses in the Tano basin as compared to the effect of unscaled seismic data. The spectral balance process was performed to match the amplitude spectra of all angle stacks to that of the mid (26°) stack on the test lines. The process had an effect primarily on the far (34° - 40°) stacks. The frequency content of these stacks slightly increased to match that of the near and mid stacks. In offset scaling process, the root mean square (RMS) amplitude comparison between the synthetic and seismic suggests that the amplitude of the far traces should be reduced relative to the nears by up to 16%. However, the exact scaler values depend on the time window considered. This suggests that the amplitude scaling with offset delivered from seismic processing is only approximately correct and needs to be checked with well synthetics and adjusted accordingly prior to use for AVO studies. The AVO attribute volumes generated were better at resolving anomalies on spectrally balanced and offset scaled data than data delivered from conventional processing. A typical class II AVO anomaly is seen along the test well from the cross-plot analysis and AVO attribute cube which indicates an oil filled reservoir.

An Improved Bounded Conflict-Based Search for Multi-AGV Pathfinding in Automated Container Terminals

As the number of automated guided vehicles(AGVs)within automated container terminals(ACT)continues to rise,conflicts have becomemore frequent.Addressing point and edge conflicts ofAGVs,amulti-AGVconflict-free path planning model has been formulated to minimize the total path length of AGVs between shore bridges and yards.For larger terminalmaps and complex environments,the grid method is employed to model AGVs’road networks.An improved bounded conflict-based search(IBCBS)algorithmtailored to ACT is proposed,leveraging the binary tree principle to resolve conflicts and employing focal search to expand the search range.Comparative experiments involving 60 AGVs indicate a reduction in computing time by 37.397%to 64.06%while maintaining the over cost within 1.019%.Numerical experiments validate the proposed algorithm’s efficacy in enhancing efficiency and ensuring solution quality.

Influences of Skin and Base Types on the Soothing Assessment of Cosmetic Products

In order to assess the responses of different skin types stimulated by tape stripping,after which two kinds of brand cosmetics of cream and hydrogel,were separately applied to evaluate the individual soothing effect of the product on different skin types.A total of 30 volunteers aged 18~65 years were recruited,which were divided into four groups(oily,dry,normal and combined)according to the self-oiling ability of facial and T zones.Four 3 cm×3 cm of skins on inner forearm of each volunteer were chosen and randomly marked as blank,negative control,soothing cream and soothing gel.The blank area was kept untreated,and the remaining areas were tape-stripped by 10 times(Transparent universal 1527C-1,3M China Co.,Ltd.,)to disrupt the skin corneum and induce erythema.Images,erythema index(EI)and transcutaneous water loss rate(TEWL)of the marked skin areas before and 5 min after tape-stripping were taken to assess the distinct responses of different skin type to the taping treatment;Ten minutes after tape-stripping,The soothing products were applied to the test area,the skin images,EI and TEWL at 20 min and 50 min(corresponding to 30 min and 60 min after tape-stripping,respectively)were measured after cosmetics application to compare and evaluate the soothing effects of cream and hydrogel on different skin types.Results showed that different skin displayed diverse reactions to the tape-stripping,and the oily skin was more sensitive with longer duration of erythema than other skin types.After the application of soothing products,both cream and hydrogel could relieve skin erythema,while the soothing effects are dependent both on skin types and the cosmetic base materials:Hydrogel has a better efficacy in alleviating erythema and TEWL of dry skin,while the cream was more effective on normal,oily and combined skin types.The results suggest that the modelling method for soothing evaluation should consider the skin types of the volunteers,and the cosmetics of different base materials might have the target skin types.