E-beam degradation of bisphenol A(BPA) was carried out,under reductive condition of ethanol-water solution and oxidative condition of acetonitrile-water solution.The degradation efficiency is higher in oxidative condi...E-beam degradation of bisphenol A(BPA) was carried out,under reductive condition of ethanol-water solution and oxidative condition of acetonitrile-water solution.The degradation efficiency is higher in oxidative condition than that in reductive condition,and increases with the dose but decreased with increasing initial concentration.The BPA radiolysis follows the pseudo-first-order kinetics.Adding H_2O_2,or neutral condition,does not benefit BPA degradation in oxidative conditions.Pulsed radiolysis was used to investigate mechanism of the BPA radiolysis.The rate constant for BPA reaction with OH(1.85×10^(10) L·mor^(-1)·s^(-1)) is about an order of magnitude higher than that with e_(aq)^-(1.80×l0~9 L·mor^(-1)·s^(-1)).The degradation products were analyzed by ion chromatograph.Smaller molecules such as formic acid and acetic acid were detected,indicating that ^-OH attacks the BPA molecule.The work is of significance for the practical E-beam treatment of waste water containing BPA.展开更多
采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温...采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温至90℃范围内的黏度小于300 m Pa·s,凝胶时间大于10 h,起始固化温度、固化温度和终止固化温度分别为186±5℃,235±5℃和286±5℃;固化特征温度随着催化剂含量的增加而降低,直至催化剂饱和,其饱和范围为0.02%~0.03%,可使双酚E型氰酸酯树脂体系的固化温度降低约60℃,从而避免爆聚,实现液相法成型其复合材料;真空导入模塑工艺制备的石英纤维/双酚E型氰酸酯复合材料的力学性能明显优于树脂传递模塑制备试样。展开更多
基金Supported byNational Natural Science Foundation ofChina(Nos 40973073,40830744,11025526,11175112)National Key TechnologyR&D Programinthe 11th Five-year Plan of China(No.2009BAA24B04)Shanghai Leading Academic Discipline Project(No.S30109)
文摘E-beam degradation of bisphenol A(BPA) was carried out,under reductive condition of ethanol-water solution and oxidative condition of acetonitrile-water solution.The degradation efficiency is higher in oxidative condition than that in reductive condition,and increases with the dose but decreased with increasing initial concentration.The BPA radiolysis follows the pseudo-first-order kinetics.Adding H_2O_2,or neutral condition,does not benefit BPA degradation in oxidative conditions.Pulsed radiolysis was used to investigate mechanism of the BPA radiolysis.The rate constant for BPA reaction with OH(1.85×10^(10) L·mor^(-1)·s^(-1)) is about an order of magnitude higher than that with e_(aq)^-(1.80×l0~9 L·mor^(-1)·s^(-1)).The degradation products were analyzed by ion chromatograph.Smaller molecules such as formic acid and acetic acid were detected,indicating that ^-OH attacks the BPA molecule.The work is of significance for the practical E-beam treatment of waste water containing BPA.
文摘采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温至90℃范围内的黏度小于300 m Pa·s,凝胶时间大于10 h,起始固化温度、固化温度和终止固化温度分别为186±5℃,235±5℃和286±5℃;固化特征温度随着催化剂含量的增加而降低,直至催化剂饱和,其饱和范围为0.02%~0.03%,可使双酚E型氰酸酯树脂体系的固化温度降低约60℃,从而避免爆聚,实现液相法成型其复合材料;真空导入模塑工艺制备的石英纤维/双酚E型氰酸酯复合材料的力学性能明显优于树脂传递模塑制备试样。
