Stationary patterns in a discrete bistable reaction-diffusion system:mode analysis

This paper theoretically analyses and studies stationary patterns in diffusively coupled bistable elements. Since these stationary patterns consist of two types of stationary mode structure： kink and pulse, a mode analysis method is proposed to approximate the solutions of these localized basic modes and to analyse their stabilities. Using this method, it reconstructs the whole stationary patterns. The cellular mode structures （kink and pulse） in bistable media fundamentally differ from stationary patterns in monostable media showing spatial periodicity induced by a diffusive Taring bifurcation.

Snap-through behaviors and nonlinear vibrations of a bistable composite laminated cantilever shell:an experimental and numerical study

The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches.An improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric region.The symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of constraint.Different motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement sensors.The numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is obtained.The numerical solutions are in good agreement with the experimental results.The nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively analyzed.Due to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.

Generative optimization of bistable plates with deep learning

Bistate plates have found extensive applications in the domains of smart structures and energy harvesting devices.Most bistable curved plates are characterized by a constant thickness profile.Regrettably,due to the inherent complexity of this problem,relatively little attention has been devoted to this area.In this study,we demonstrate how deep learning can facilitate the discovery of novel plate profiles that cater to multiple objectives,including maximizing stiffness,forward snapping force,and backward snapping force.Our proposed approach is distinguished by its efficiency in terms of low computational energy consumption and high effectiveness.It holds promise for future applications in the design and optimization of multistable structures with diverse objectives,addressing the requirements of various fields.

Performance enhancement of a viscoelastic bistable energy harvester using time-delayed feedback control

This paper focuses on the stochastic analysis of a viscoelastic bistable energy harvesting system under colored noise and harmonic excitation, and adopts the time-delayed feedback control to improve its harvesting efficiency. Firstly, to obtain the dimensionless governing equation of the system, the original bistable system is approximated as a system without viscoelastic term by using the stochastic averaging method of energy envelope, and then is further decoupled to derive an equivalent system. The credibility of the proposed method is validated by contrasting the consistency between the numerical and the analytical results of the equivalent system under different noise conditions. The influence of system parameters on average output power is analyzed, and the control effect of the time-delayed feedback control on system performance is compared. The output performance of the system is improved with the occurrence of stochastic resonance(SR). Therefore, the signal-to-noise ratio expression for measuring SR is derived, and the dependence of its SR behavior on different parameters is explored.

Theoretical and experimental investigation of the resonance responses and chaotic dynamics of a bistable laminated composite shell in the dynamic snap-through mode

The dynamic model of a bistable laminated composite shell simply supported by four corners is further developed to investigate the resonance responses and chaotic behaviors.The existence of the 1:1 resonance relationship between two order vibration modes of the system is verified.The resonance response of this class of bistable structures in the dynamic snap-through mode is investigated,and the four-dimensional(4D)nonlinear modulation equations are derived based on the 1:1 internal resonance relationship by means of the multiple scales method.The Hopf bifurcation and instability interval of the amplitude frequency and force amplitude curves are analyzed.The discussion focuses on investigating the effects of key parameters,e.g.,excitation amplitude,damping coefficient,and detuning parameters,on the resonance responses.The numerical simulations show that the foundation excitation and the degree of coupling between the vibration modes exert a substantial effect on the chaotic dynamics of the system.Furthermore,the significant motions under particular excitation conditions are visualized by bifurcation diagrams,time histories,phase portraits,three-dimensional(3D)phase portraits,and Poincare maps.Finally,the vibration experiment is carried out to study the amplitude frequency responses and bifurcation characteristics for the bistable laminated composite shell,yielding results that are qualitatively consistent with the theoretical results.

Inter-well internal resonance analysis of rectangular asymmetric cross-ply bistable composite laminated cantilever shell under transverse foundation excitation

The chaotic dynamic snap-through and complex nonlinear vibrations are investigated in a rectangular asymmetric cross-ply bistable composite laminated cantilever shell,in cases of 1:2 inter-well internal resonance and primary resonance.The transverse foundation excitation is applied to the fixed end of the structure,and the other end is in a free state.The first-order approximate multiple scales method is employed to perform the perturbation analysis on the dimensionless two-degree-of-freedom ordinary differential motion control equation.The four-dimensional averaged equations are derived in both polar and rectangular coordinate forms.Deriving from the obtained frequency-amplitude and force-amplitude response curves,a detailed analysis is conducted to examine the impacts of excitation amplitude,damping coefficient,and tuning parameter on the nonlinear internal resonance characteristics of the system.The nonlinear softening characteristic is exhibited in the upper stable-state,while the lower stable-state demonstrates the softening and linearity characteristics.Numerical simulation is carried out using the fourth-order Runge-Kutta method,and a series of nonlinear response curves are plotted.Increasing the excitation amplitude further elucidates the global bifurcation and chaotic dynamic snap-through characteristics of the bistable cantilever shell.

Adaptive Bistable Stochastic Resonance Based Weak Signal Reception in Additive Laplacian Noise

Weak signal reception is a very important and challenging problem for communication systems especially in the presence of non-Gaussian noise,and in which case the performance of optimal linear correlated receiver degrades dramatically.Aiming at this,a novel uncorrelated reception scheme based on adaptive bistable stochastic resonance(ABSR)for a weak signal in additive Laplacian noise is investigated.By analyzing the key issue that the quantitative cooperative resonance matching relationship between the characteristics of the noisy signal and the nonlinear bistable system,an analytical expression of the bistable system parameters is derived.On this basis,by means of bistable system parameters self-adaptive adjustment,the counterintuitive stochastic resonance(SR)phenomenon can be easily generated at which the random noise is changed into a benefit to assist signal transmission.Finally,it is demonstrated that approximately 8dB bit error ratio(BER)performance improvement for the ABSR-based uncorrelated receiver when compared with the traditional uncorrelated receiver at low signal to noise ratio(SNR)conditions varying from-30dB to-5dB.

Vibrational resonance in globally coupled bistable systems under the noise background

Effects of system size,coupling strength,and noise on vibrational resonance(VR)of globally coupled bistable systems are investigated.The power spectral amplifications obtained by the three methods all show that the VR exists over a wide range of parameter values.The increase in system size induces and enhances the VR,while the increase in noise intensity suppresses and eventually eliminates the VR.Both the stochastic resonance and the system size resonance can coexist with the VR in different parameter regions.This research has potential applications to the weak signal detection process in stochastic multi-body systems.

ASYMPTOTICAL STABILITY OF NEUTRAL REACTION-DIFFUSION EQUATIONS WITH PCAS AND THEIR FINITE ELEMENT METHODS

This paper focuses on the analytical and numerical asymptotical stability of neutral reaction-diffusion equations with piecewise continuous arguments.First,for the analytical solutions of the equations,we derive their expressions and asymptotical stability criteria.Second,for the semi-discrete and one-parameter fully-discrete finite element methods solving the above equations,we work out the sufficient conditions for assuring that the finite element solutions are asymptotically stable.Finally,with a typical example with numerical experiments,we illustrate the applicability of the obtained theoretical results.

Dynamics of a Reaction-Diffusion System with Quiescence

In this paper,the dynamical behavior of a reaction-diffusion system with quiescence in a closed environment is investigated.The global existence of the solution is obtained by the upper and lower solution method,and the dissipative structure of the system is derived by constructing Lyapunov functions.

Organic,Bistable Devices with AgTCNQ Charge Transfer Complex by Vacuum Co-Deposition

The AgTCNQ thin-film was prepared by vacuum vapor co-deposition and characterized by infrared spectral analysis,and then a uniform AgTCNQ （TCNQ-- 7,7,8,8-tetracyanoquinodimethane） thin-film layer was sandwiched in a Ti/AgTCNQ/Ati crossbar structure array as organic bistable devices （OBD）.A reversible and reproducible memory switching property,caused by intermolecular charge transfer （CT） in the AgTCNQ thin-film, was observed in the organic bista- ble devices. The positive threshold voltage from the high impedance state to the low impedance was about 3.8-5V, with the reverse phenomenon occurring at a negative voltage of - 3.5- - 4. 4V,lower than that with a CuTCNQ active layer. The crossbar array of OBDs with AgTCNQ is promising for nonvolatile organic memory applications.

Controlling and synchronizing spatiotemporal chaos of the coupled Bragg acousto-optical bistable map system using nonlinear feedback

In this paper we present the control and synchronization of a coupled Bragg acousto-optic bistable map system using nonlinear feedback technology. This nonlinear feedback technology is useful to control a temporally chaotic system as well as a spatiotemporally chaotic system. It can be extended to synchronize the spatiotemporal chaos. It can work in a wide range of the controlled and synchronized signals, so it can decrease the sensitivity down to a noise level. The synchronization can be obtained by the analysis of the largest conditional Lyapunov exponent spectrum, and easily implemented in practical systems just by adjusting the coupled strength without any pre-knowledge of the dynamic system required.

Stochastic resonance in a time-delayed bistable system subject to multiplicative and additive noise

This paper investigates the stochastic resonance in a time-delayed bistable system subjected to multiplicative and additive white noise and asymmetric dichotomous noise. Under the adiabatic approximation condition, the expression of the signal-to-noise ratio （SNR） is obtained. It finds that the SNR is a non-monotonic function of the delayed times, of the amplitude of the driving square-wave signal, as well as of the asymmetry of the dichotomous noise. In addition, the SNR varies non-monotonously with the intensities of the multiplicative and additive noise as well as the system parameters. Moreover, the SNR depends non-monotonically on the correlate rate of the dichotomous noise.

Analysis of chaos behaviors of a bistable piezoelectric cantilever power generation system by the second-order Melnikov function

By applying the second order Melnikov function, the chaos behaviors of a bistable piezoelectric cantilever power generation system are analyzed. Firstly, the conditions for emerging chaos of the system are derived by the second order Melnikov function. Secondly, the effects of each item in chaos threshold expression are analyzed. The excitation frequency and resistance values, which have the most influence on chaos threshold value, are found. The result from the second order Melnikov function is more accurate compared with that from the first order Melnikov function. Finally, the attraction basins of large amplitude motions under different exciting frequency, exciting amplitude, and resistance parameters are given.

Steady-state analysis subject to a coloured and a white additive of a bistable system multiplicative noise noise with coloured cross-correlated noises

The steady-state properties of a bistable system are investigated when both the multiplicative noise and the coupling between additive and multiplicative noises are coloured with different values of noise correlation times T1 and T2. After introducing a dimensionless parameter R（R = α/D, D is the intensity of the multiplicative noise and a is the intensity of the additive noise）, and performing the numerical computations, we find the following points： （1） For the case of R 〉 1, A （the intensity of correlation between additive and multiplicative noises）, T1 and T2 can induce the stationary probability distribution （SPD） transition from bimodal to unimodal in structure, but for the cases of R _〈 1, the bimodal structure is preserved; （2） a can also induce the SPD transition from bimodal to unimodal in structure; （3） the bimodal structure of the SPD exhibits a symmetrical structure as D increases.

Stochastic resonance in a stochastic bistable system with additive noises and square-wave signal

This paper considers the stochastic resonance in a stochastic bistable system driven by a periodic square-wave signal and a static force as well as by additive white noise and dichotomous noise from the viewpoint of signal-to-noise ratio. It finds that the signal-to-noise ratio appears as stochastic resonance behaviour when it is plotted as a function of the noise strength of the white noise and dichotomous noise, as a function of the system parameters, or as a function of the static force. Moreover, the influence of the strength of the stochastic potential force and the correlation rate of the dichotomous noise on the signal-to-noise ratio is investigated.

Stochastic resonance in an under-damped bistable system driven by harmonic mixing signal

Stochastic resonance（SR） is studied in an under-damped bistable system driven by the harmonic mixing signal and Gaussian white noise. Using the linear response theory（LRT）, the expressions of the spectral amplification at fundamental and higher-order harmonic are obtained. The effects of damping coefficient, noise intensity, signal amplitude, and frequency on spectral amplifications are explored. Meanwhile, the power spectral density（PSD） and signal-to-noise ratio（SNR） are calculated to quantify SR and verify the theoretical results. The SNRs at the first and second harmonics exhibit a minimum first and a maximum later with increasing noise intensity. That is, both of the noise-induced suppression and resonance can be observed by choosing proper system parameters. Especially, when the ratio of the second harmonic amplitude to the fundamental one takes a large value, the SNR at the fundamental harmonic is a monotonic function of noise intensity and the SR phenomenon disappears.

Effect of Asymmetry in a Bistable System Subject to Multiplicative Colored Noise

By the method of the stochastic energetics,we investigate the stochastic resonance (SR) phenomenon of anoverdamped Brown particle in an asymmetric bistable potential,driven by external periodical signal and multiplicativenoise.The expressions have been obtained for the quasi-steady-state probability distribution function.It is found thatthe input energy (IE) pumped into the system by the external driving shows an SR-like behavior as a function of thenoise strength,whereas the IE turns to be a monotonic function of the correlation time of the noise.The effect ofpotential asymmetry is also studied on SR and IE.

Mean first-passage time of an asymmetric bistable system driven by colour-correlated noise

In this paper, the effect of every parameter （including p, q, r, λ, τ） on the mean first-passage time （MFPT） is investigated in an asymmetric bistable system driven by colour-correlated noise. The expression of MFPT has been obtained by applying the steepest-descent approximation. Numerical results show that （1） the intensity of multiplicative noise p and the intensity of additive noise q play different roles in the MFPT of the system, （2） suppression appears on the curve of the MFPT with small λ （e.g. λ 〈 0.5） but there is a peak on the curve of the MFPT when λ is big （e.g. λ 〉 0.5）, and （3） with different values of r （e.g. r = 0.1, 0.5, 1.5）, the effort of τ on the MFPT is diverse.

Analytical modeling for rapid design of bistable buckled beams

Double-clamped bistable buckled beams demonstrate great versatility in various fields such as robotics,energy harvesting,and microelectromechanical system(MEMS).However,their design often requires time-consuming and expensive computations.In this work,we present a method to easily and rapidly design bistable buckled beams subjected to a transverse point force.Based on the Euler–Bernoulli beam theory,we establish a theoretical model of bistable buckled beams to characterize their snapthrough properties.This model is verified against the results from a finite element analysis(FEA)model,with maximum discrepancy less than 7%.By analyzing and simplifying our theoretical model,we derive explicit analytical expressions for critical behavioral values on the force-displacement curve of the beam.These behavioral values include critical force,critical displacement,and travel,which are generally sufficient for characterizing the snapthrough properties of a bistable buckled beam.Based on these analytical formulas,we investigate the influence of a bistable buckled beam's key design parameters,including its actuation position and precompression,on its critical behavioral values,with our results validated by FEA simulations.Our analytical method enables fast and computationally inexpensive design of bistable buckled beams and can guide the design of complicated systems that incorporate bistable mechanisms.