The problems of joint adaptive waveform design and baseline range design for bistatic radar to maximize the practical radar resolution were considered.Distinguishing from the conventional ambiguity function(AF)-based ...The problems of joint adaptive waveform design and baseline range design for bistatic radar to maximize the practical radar resolution were considered.Distinguishing from the conventional ambiguity function(AF)-based resolution which is only related with the transmitted waveform and bistatic geometry and could be regarded as the potential resolution of a bistatic radar system,the practical resolution involves the effect of waveform,signal-to-noise ratio(SNR)as well as the measurement model.Thus,it is more practical and will have further significant application in target detection and tracking.The constraint optimization procedure of joint adaptive waveform design and baseline range design for maximizing the practical resolution of bistatic radar system under dynamic target scenario was devised.Simulation results show that the range and velocity resolution are enhanced according to the adaptive waveform and bistatic radar configuration.展开更多
The approach to estimate the length of extended targets by using the bistatic high resolution range profile（ H RRP） is analyzed in this paper. The relationship between the bistatic H RRP and the monostatic H RRP of ...The approach to estimate the length of extended targets by using the bistatic high resolution range profile（ H RRP） is analyzed in this paper. The relationship between the bistatic H RRP and the monostatic H RRP of extended targets are investigated. It is demonstrated by simulations that the target length measured by the bistatic H RRP is more meaningful and accurate than that by the monostatic HRRP,though the monostatic H RRP has been well developed and widely used in target recognizing and classification. The estimation results of a cone shaped target are present and compared at the end of the paper. To assure the reliability of the simulation,the bistatic H RRP is obtained through the scattering field data calculated by a fullwave numerical method,FE-BI-MLFMA.展开更多
Based on the point spread function （PSF） theory, the side-lobe extension direction of the impulse response in bistatic synthetic aperture radar （BSAR） is analyzed in detail; in addition, the corresponding autofocu...Based on the point spread function （PSF） theory, the side-lobe extension direction of the impulse response in bistatic synthetic aperture radar （BSAR） is analyzed in detail; in addition, the corresponding autofocus in BSAR should be considered along iso-range direction, not the traditional azimuth resolution （AR） direction. The conclusion is verified by the computer simulation.展开更多
To obtain the radar High Range Resolution (HRR) profile of the slowly moving ground target in strong clutter background, the Phase-Coded Hopped-Frequency (PCHF) waveform is proposed. By multiple-bursts coherent proces...To obtain the radar High Range Resolution (HRR) profile of the slowly moving ground target in strong clutter background, the Phase-Coded Hopped-Frequency (PCHF) waveform is proposed. By multiple-bursts coherent processing, the HRR profile synthesis, target velocity compensation and clutter compression can be accomplished simultaneously. The new waveform is shown to have good ability to suppress ground clutter and good Electronic Counter-CounterMeasures (ECCM) ability as well. The clutter compression performance of the proposed method is verified by the numerical results.展开更多
A fast algorithm of azimuth processing for spaceborne aperture radar (SAR), which is called SPECAN algorithm, is proposed. Compared with general frequency algorithms, SPECAN has advantages in computation, memory and s...A fast algorithm of azimuth processing for spaceborne aperture radar (SAR), which is called SPECAN algorithm, is proposed. Compared with general frequency algorithms, SPECAN has advantages in computation, memory and structure. SPECAN algorithm is very important for surveying real time processing of spaceborne SAR. The structure and special problems for SPECAN algorithm used in spaceborne SAR are mainly engaged in this paper. Finally, raw data of SEASAT-A satellite is used to verify the feasibility of SPECAN algorithm.展开更多
基金Project supported by the Program for New Century Excellent Talents in University,ChinaProject(61171133)supported by the National Natural Science Foundation of China+2 种基金Project(11JJ1010)supported by the Natural Science Fund for Distinguished Young Scholars of Hunan Province,ChinaProject(61101182)supported by the National Natural Science Foundation for Young Scientists of ChinaProject(20124307110013)supported by the Doctoral Program of Higher Education of China
文摘The problems of joint adaptive waveform design and baseline range design for bistatic radar to maximize the practical radar resolution were considered.Distinguishing from the conventional ambiguity function(AF)-based resolution which is only related with the transmitted waveform and bistatic geometry and could be regarded as the potential resolution of a bistatic radar system,the practical resolution involves the effect of waveform,signal-to-noise ratio(SNR)as well as the measurement model.Thus,it is more practical and will have further significant application in target detection and tracking.The constraint optimization procedure of joint adaptive waveform design and baseline range design for maximizing the practical resolution of bistatic radar system under dynamic target scenario was devised.Simulation results show that the range and velocity resolution are enhanced according to the adaptive waveform and bistatic radar configuration.
基金Supported by the National Natural Science Fundation of China(61001192)
文摘The approach to estimate the length of extended targets by using the bistatic high resolution range profile（ H RRP） is analyzed in this paper. The relationship between the bistatic H RRP and the monostatic H RRP of extended targets are investigated. It is demonstrated by simulations that the target length measured by the bistatic H RRP is more meaningful and accurate than that by the monostatic HRRP,though the monostatic H RRP has been well developed and widely used in target recognizing and classification. The estimation results of a cone shaped target are present and compared at the end of the paper. To assure the reliability of the simulation,the bistatic H RRP is obtained through the scattering field data calculated by a fullwave numerical method,FE-BI-MLFMA.
文摘Based on the point spread function （PSF） theory, the side-lobe extension direction of the impulse response in bistatic synthetic aperture radar （BSAR） is analyzed in detail; in addition, the corresponding autofocus in BSAR should be considered along iso-range direction, not the traditional azimuth resolution （AR） direction. The conclusion is verified by the computer simulation.
基金Supported by the National Natural Science Foundation of China (No.60302009).
文摘To obtain the radar High Range Resolution (HRR) profile of the slowly moving ground target in strong clutter background, the Phase-Coded Hopped-Frequency (PCHF) waveform is proposed. By multiple-bursts coherent processing, the HRR profile synthesis, target velocity compensation and clutter compression can be accomplished simultaneously. The new waveform is shown to have good ability to suppress ground clutter and good Electronic Counter-CounterMeasures (ECCM) ability as well. The clutter compression performance of the proposed method is verified by the numerical results.
基金Supported by "863" High-Technique of the State Science and Technology Commission
文摘A fast algorithm of azimuth processing for spaceborne aperture radar (SAR), which is called SPECAN algorithm, is proposed. Compared with general frequency algorithms, SPECAN has advantages in computation, memory and structure. SPECAN algorithm is very important for surveying real time processing of spaceborne SAR. The structure and special problems for SPECAN algorithm used in spaceborne SAR are mainly engaged in this paper. Finally, raw data of SEASAT-A satellite is used to verify the feasibility of SPECAN algorithm.
