Bistatic Synthetic Aperture Radar Point Spread Function Characteristic Analysis

Based on the point spread function （PSF） theory, the side-lobe extension direction of the impulse response in bistatic synthetic aperture radar （BSAR） is analyzed in detail; in addition, the corresponding autofocus in BSAR should be considered along iso-range direction, not the traditional azimuth resolution （AR） direction. The conclusion is verified by the computer simulation.

Improved chirp scaling algorithm integrated motion compensation for parallel-track bistatic synthetic aperture radar

To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar（BiSAR）,an improved chirp scaling algorithm（CSA） is proposed.Since velocity vector of the moving aircrafts in the parallel-track BiSAR system can not remain invariant in an aperture,an actual aperture is divided into subapertures so that it is reasonable to assume that the aircrafts move with constant acceleration vector in a subaperture.Based on this model,an improved CSA is derived.The new phase factors incorporate three-dimensional acceleration and velocity.The motion compensation procedure is integrated into the CSA without additional operation required.The simulation results show that the presented algorithm can efficiently resolve motion compensation for parallel-track BiSAR.

Spatial Channel Sounding Based on Bistatic Synthetic Aperture Radar Principles

In this paper, we propose a simplified spatial channel sounding method by utilizing bistatic synthetic aperture radar(BiSAR) principles. Despite the different deployment geometries compared with a conventional BiSAR system, the feasibility of the approach is established by 1) the proposed method achieves a better spatial resolution than conventional directional channel sounders and 2) reconstruction algorithms based on time-domain backprojection in conjunction with a digital elevation model provide a good imaging performance and are suitable for reconstructing the spatial distribution of scatterers. Simulations of a high-speed rail(HSR) scenario demonstrate that the estimated power delay profiles(PDPs) and power angle profiles(PAPs) are close to the actual values.

New Precision Guidance Method Based on Bistatic Synthetic Apterture Radar

A new method is presented to improve guidance precision. This method is based on bistatic synthetic aperture radar. The illuminator works in side looking mode, providing the synthetic aperture and the receiver is disposed on the seeker which operates in the forward looking mode. The receiving antenna is composed of four sub-antennas and so four synthetic aperture radar （SAR） images are to be generated. Target is positioned in SAR images by image matching. The bearing and elevation of image element of target are measured by the principle of monopulse angular measurement. Theory of the proposed method is derived and simulation on bearing measurement is done. Simulation shows that the method is valid and if SNR of target＇s image is above 30 dB, the angular measuring difference is within the confines of 0.04 degree.

基于导航卫星的InBSAR信号处理与实验验证

基于导航卫星的干涉双基地SAR(InBSAR)系统采用在轨的导航卫星作为照射源,通过共享导航信号实现雷达与导航功能的信号级融合,具备时间、空间同时双连续形变监测能力。本文讨论了高自由度对大幅度提升该系统多角度成像、多基线干涉与层析性能的物理机理。由于导航卫星自有的同时可见多星、多星座的特点,基于导航卫星的InBSAR具有系统自由度极高的优势。本文同时总结并分析了图像融合、三维形变和层析成像等信号处理算法。最后对近年来相关领域的最新研究进展进行了综述和分析,指出了该项技术的后续发展方向。

基于GPS卫星照射的SS-BSAR系统信噪比研究

以导航卫星为信号照射源的星表双基SAR系统(SS-BSAR)由于具有隐蔽性强、节约成本等特点,近年来受到了广泛关注。针对基于GPS卫星照射源的SS-BSAR系统信号带宽较窄、发射信号功率低等问题,首先分析非合作卫星照射源的选择及GPS卫星信号特性;根据GPS卫星信号的双基雷达方程,给出系统最大目标检测距离;分别推导基于GPS卫星信号的点、面目标双基SAR系统信噪比及信干比,分析信噪比与雷达接收斜距、目标截面积、雷达运动速度等因素的关系;最后提出改进系统信噪比、信干比的方法。

直反信号协同的GNSS-R BSAR距离多普勒成像算法

针对目前基于全球导航卫星系统反射信号的双基地合成孔径雷达(GNSS-R BSAR)在一站固定模式下的大斜视,斜距历程复杂,回波信号方位空变导致回波信号难以处理的问题,提出改进的距离多普勒成像新算法。所提算法采用GNSS信号作为辐射源,根据一站固定模式下GNSS-R BSAR合成孔径时间长的特点,引入高阶等效斜视距离模型,得到导航卫星与目标斜距相对时间变化的精确描述。先通过直射信号与回波信号时域对消进行距离徙动校正,实现全场景目标距离徙动的精确校正;再通过方位向分块混合相关处理来克服回波信号方位向的移变性质,实现全场景高效精确成像。所提算法的成像效率优于传统后向投影时域(BP)算法,成像精度与BP算法相当,且可根据需要通过调整方位分块的宽度来提升聚焦效果。最后,用GPS-L5信号进行仿真和实验,仿真和实验结果验证了所提算法的可行性和高效性。

A jamming method against bistatic SAR based on modulation theory

This paper focuses on the jamming problem of bistatic synthetic aperture radar (BiSAR), and a jamming method against BiSAR based on modulation theory is proposed. The proposed jamming method modulates the BiSAR signal with the cosinusoidal phase to generate multi-false targets in range, and further rotates the jammer to generate multi-false targets in azimuth. The range multi-false targets and azimuth multi-false targets form the two-dimensional cover jamming or deception jamming, which can protect the important targets efficiently. The number of false targets, the interval of false targets, and the jamming square can be adjusted flexibly by setting different range jamming parameters and azimuth jamming parameters. The jamming performance and the choosing criteria of jamming parameters are also discussed. Finally, the simulated data verify the effectiveness of the jamming method.

Design Bistatic Interferometric DEM Generation Algorithm and Its Theoretical Accuracy Analysis for LuTan-1 Satellites

LuTan-1(LT-1)is a constellation with two full-polarization L-band radar satellites designed by China,and the first satellite was scheduled to be launched in December 2021 and the second one in January 2022.The LT-1 will be operated for deformation monitoring in repeat-pass mode,and for DEM generation in bistatic mode,improving self-sufficiency of SAR data for the field of geology,earthquake,disaster reduction,geomatics,forestry and so on.In this paper,we focused on designing an algorithm for interferometric DEM generation using LT-1 bistatic satellites.The basic principle,main error sources and errors control of the DEM generation algorithm of LT-1 were systematically analyzed.The experiment results demonstrated that:①The implemented algorithm had rigorous resolution with a theoretic accuracy better than 0.03 m for DEM generation.②The errors in satellite velocity and Doppler centroid had no obvious effect on DEM accuracy and they could be neglected.While the errors in position,baseline,slant range and interferometric phase had a significant effect on DEM accuracy.And the DEM error caused by baseline error was dominated,followed by the slant range error,interferometric phase error and satellite position error.③To obtain an expected DEM accuracy of 2 m,the baseline error must be strictly controlled and its accuracy shall be 1.0 mm or better for Cross-Track and Normal-Direction component,respectively.And the slant range error and interferometric phase error shall be reasonably controlled.The research results were of great significance for accurately grasping the accuracy of LT-1 data products and their errors control,and could provide a scientific auxiliary basis for LT-1 in promoting global SAR technology progress and the generation of high-precision basic geographic data.

RESEARCH ON THE BISTATIC FORWARD-LOOKING SAR IMAGING

The bistatic Synthetic Aperture Radar (SAR) systems with separate transmitter and receiver antennas provide a new potential to imaging in the forward-looking geometry. Analysis of the Doppler property in this paper indicates the feasibility of Bistatic Forward-Looking (BFL) SAR imaging. Considering the different Doppler property determined by the two platforms in BFL SAR, a new 2-D point target spectrum is derived in our study. Based on the spectrum, an imaging method is chosen for the configuration, and the point target simulation validates the analysis.

Nonlinear RCMC method for spaceborne/airborne forward-looking bistatic SAR

In the spaceborne/airborne forward-looking bistatic syn- thetic aperture radar （SA-FBSAR）, due to the system platforms＇ remarkable velocity difference and the forward-looking mode, the range cell migration （RCM） not only depends on the target＇s two- dimensional location, but also varies with the range location non- linearly. And the nonlinearity is not just the slight deviation from the linear part, but exhibits evident nonlinear departure in the RCM trajectory. If the RCM is not properly corrected, nonlinear image distortions would occur. Based on the RCM model, a modified two-step RCM compensation （RCMC） method for SA-FBSAR is proposed. In this method, firstly the azimuth-dependent RCM is compensated by the scaling Fourier transform and the phase multi- plication. And then the range-dependent RCM is removed through interpolation. The effectiveness of the proposed RCMC method is verified by the simulation results of both point scatterers and area targets.

Phase synchronization processing method for alternating bistatic mode in distributed SAR

In the distributed synthetic aperture radar （SAR）, the alternating bistatic mode can perform phase reference without a synchronization link between two satellites compared with the pulsed alternate synchronization method. The key of the phase synchronization processing is to extract the oscillator phase differences from the bistatic echoes. A signal model of phase synchronization in the alternating bistatic mode is presented. The phase synchronization processing method is then studied. To reduce the phase errors introduced by SAR imaging, a sub-aperture processing method is proposed. To generalize the sub-aperture processing method, an echo-domain processing method using correlation of bistatic echoes is proposed. Finally, the residual phase errors of the both proposed processing methods are analyzed. Simulation experiments validate the proposed phase synchronization processing method and its phase error analysis results.

Property analysis of bistatic forward-looking SAR with arbitrary geometry

Bistatic forward-looking synthetic aperture radar（SAR） has many advantages and applications owing to its twodimensional imaging capability.There could be various imaging configurations because of the geometric flexibility of bistatic platforms,resulting in kinds of models built independently among which there could be some similar even the same motion features.Comprehensive research on such systems in a more comprehensive and general point of view is required to address their difference and consistency.Property analysis of bistatic forwardlooking SAR with arbitrary geometry is achieved including stripmap and spotlight modes on airborne platform,missile-borne platform,and hybrid platform of both.Emphasis is placed on azimuth space variance of some key parameters significantly affecting the subsequent imaging processing,based on which the frequency spectra are further described and compared considering respective features of different platforms for frequency imaging algorithm developing.Simulation results confirm the effectiveness and correctness of our analysis.

Resolution analysis of GEO spaceborne-airborne bistatic SAR based on sliding spotlight mode

For a synthetic aperture radar（SAR） system mounted on a geostationary Earth orbit（GEO） satellite, the track can be curvilinear. Thus, a bistatic SAR system based up on geostationary transmitter and ＂receive-only＂ SAR system onboard airplanes, namely GEO spaceborne-airborne bistatic（GEO SA-Bi SAR）, is significantly different from the traditional bistatic SAR. This paper mainly studies the resolution characteristic of the sliding spotlight GEO SA-Bi SAR system. Firstly, the common azimuth coverage and coherent accumulated time are theoretically analyzed in detail. Then,based on the gradient method, the accurate two dimensional resolution of a GEO SA-Bi SAR system is analytically calculated. Finally, the simulation data show the correctness and effectiveness of the proposed resolution analysis method.

Temporal decorrelation model for the bistatic SAR interferometry

This paper develops a temporal decorrelation model for the bistatic synthetic aperture radar（BSAR） interferometry. The temporal baseline is one of the important decorrelation sources for the repeat-pass synthetic aperture radar（SAR） interferometry. The study of temporal decorrelation is challenging, especially for the bistatic configuration, since temporal decorrelation is related to the data acquisition geometry. To develop an appropriate theoretical model for BSAR interferometry, the existing models for monostatic SAR cases are extended, and the general BSAR geometry configuration is involved in the derivation. Therefore, the developed temporal decorrelation model can be seen as a general model.The validity of the theoretical model is supported by Monte Carlo simulations. Furthermore, the impacts of the system parameters and BSAR geometry configurations on the temporal decorrelation model are discussed briefly.

Improved chirp scaling algorithm for parallel-track bistatic SAR

The curvature factor of the parallel-track bistatic SAR is range dependent, even without variation of the effective velocity. Accounting for this new characteristic, a parallel-track chirp scaling algorithm （CSA） is derived, by introducing the method of removal of range walk （RRW） in the time domain. Using the RRW before the CSA, this method can reduce the varying range of the curvature factor, without increasing the computation load obviously. The azimuth dependence of the azimuth-FM rate, resulting from the RRW, is compensated by the nonlinear chirp scaling factor. Therefore, the algorithm is extended into stripmap imaging. The realization of the method is presented and is verified by the simulation results.

New analytical imaging algorithm for general case airborne bistatic SAR

This paper focuses on the general case （GC） airborne bistatic synthetic aperture radar （SAR） data processing, and a new analytical imaging algorithm based on the extended Loffeld＇s bistatic formula （ELBF） is proposed. According to the bistatic SAR geometry, the track decoupling formulas that convert the bistatic geometry to the receiver-referenced geometry in a concise way are derived firstly. Then phase terms of ELBF are decomposed into two independent phase terms as the range phase term and the azimuth phase term in a new way. To get the focusing result, the bistatic deformation （BD） term is compensated in the two-dimensional （2- D） frequency domain, and the space-variances of the range phase term and the azimuth phase term are eliminated by chirp scaling （CS） and chirp z-transform （CZT）, respectively. The effectiveness of the proposed algorithm is verified by the simulation results.

Three-dimensional bistatic interferometric ISA Rimaging

An approach based on interferometry technique is proposed for three-dimensional （3D） bistatic inverse synthetic aperture radar （ISAR） imaging. It is converted to a monostatic problem by using the theory that a bistatic radar equals a monostatic radar located on the bisector of bistatic an- gle. Then, interferometric phases extracted from a pair of cross shaped antennas are used to esti- mate the height and associated rotational velocity. Finally, numerical simulations are provided to e- valuate this method.

Doppler Properties of Spaceborne/Airborne Hybrid Bistatic Synthetic Aperture Radar

In this paper,a special geometry case of spaceborne-airborne bistatic SAR(SA-BiSAR) is considered,in which satellite and aircraft flight paths are parallel and their antennas are steering at the strip map.This case is a simple but typical application example,which is applicable for non-cooperative illumination.The integration time of SA-BiSAR system is derived via the motion of transmitter and receiver footprint.In parallel and stripmap mode,Doppler frequency is obtained through the combination be-tween spaceborne and airborne SAR.Other Doppler properties have been envisaged,including Doppler bandwidth and azimuth resolution.The overall simulation experiments are conducted and some characteristics are exhibited.The critical parameters,which have the significant effect on the SA-BiSAR Doppler properties,are extracted by analytical expressions and numerical simulations.In parallel and strip map mode and with reference to ENVISAT-1,SA-BiSAR system possesses the potential of yielding 10 m azi-muth resolution and 0.5 s integration time for C-band via the analysis of simulation results.

Focusing Azimuth-Invariant Bistatic Synthetic Aperture Radar Data Based on a Polynomial Model

In this paper,a focusing approach is presented to widen the use of efficient monostatic imaging algorithms for azimuth-invariant bistatic synthetic aperture radar(SAR) data.The bistatic range history is modeled by a polynomial of azimuth time.Using this model,an analytic form of the signal spectrum in the 2D frequency domain is derived,and a simple single-valued relation between the transmitter and receive ranges is established.In this way,a lot of monostatic image formation algorithms can be extended for the bistatic SAR data,and a bistatic chirp scaling algorithm is developed as an application of the new approach.This algorithm can be used to process the azimuth-invariant bistatic configuration where the transmitter and receiver platforms are moving on parallel tracks with the same velocity.In addition,some simulation results are given to demonstrate the validity of the proposed approach.