The effect of black plate on corrosion resistance of T5 tinplate was studied by glow discharge spectrograph, X-ray diffractometer （XRD）, stress tester, roughness tester and metallographic microscope. The result show...The effect of black plate on corrosion resistance of T5 tinplate was studied by glow discharge spectrograph, X-ray diffractometer （XRD）, stress tester, roughness tester and metallographic microscope. The result shows that black plate influences corrosion resistance of T5 tinplate intensely. It also indicates that the increase of content of manganese, phosphorus, silicon and aluminum in black plate would reduce the corrosion resistance of T5 tinplate and the increase of degree of crystal orientation on （200） crystal face, ｜X-Y｜ value （internal stress difference within two orientation）, roughness and exposure degree of iron grain after the same acid wash of black plate would enhance the corrosion resistance of T5 tinplate and the grain number of black plate has small effect on corrosion resistance of T5 tinplate.展开更多
声学黑洞(Acoustic Black Hole,ABH)技术作为一种新型高效的能量聚焦以及振动控制技术,在减振降噪方面具有很好应用潜力。铝型材板结构作为一种夹层结构,具有高比刚度和高比强度等优异轻量化特性,广泛应用于列车外地板、船舶、航空航天...声学黑洞(Acoustic Black Hole,ABH)技术作为一种新型高效的能量聚焦以及振动控制技术,在减振降噪方面具有很好应用潜力。铝型材板结构作为一种夹层结构,具有高比刚度和高比强度等优异轻量化特性,广泛应用于列车外地板、船舶、航空航天等领域中。为了探究ABH和铝型材板结构相结合后是否还具有典型的ABH效应,运用有限元数值模拟方法研究嵌入式ABH铝型材板结构的振动能量聚焦特性。对于频点和频带聚焦特性分析结果表明,在铝型材板结构中嵌入ABH特征结构可以起到显著振动能量聚焦效果。此外,根据聚焦特性分析结果,在ABH铝型材板结构中的ABH特定区域内敷设阻尼材料,并通过仿真计算验证了其减振特性。结果表明,由ABH铝型材板结构附加阻尼材料所得的组合结构振动水平显著低于普通铝型材板结构,部分频率下振动衰减高达52.6 dB。这为轨道交通领域提供了一种很有应用潜力的结构减振降噪新思路。展开更多
Ships and other mobile pollution sources emitted massive ultrafine and low-resistivity particles containing black carbon(BC),which were harmful to human health and were difficult to capture by conventional electrostat...Ships and other mobile pollution sources emitted massive ultrafine and low-resistivity particles containing black carbon(BC),which were harmful to human health and were difficult to capture by conventional electrostatic precipitators(ESPs).In this study,nanoscale carbon black was adopted as simulated particles(SP)with similar physicochemical properties for black carbon emitted from ships(SP-BC)to investigate the feasibility of using an ESP with square-grooved collecting plates for the removal of SP-BC at low backpressures.The increased applied voltage significantly improved the total collection of SP-BC whereas may also promote the conversion of relatively larger particle size SP-BC into nano-size below 20nm.The outlet number concentration of SP-BC under 27 kV at 130℃was three times that of the inlet.While the reduction of the flow rate could strengthen the capture of SP-BC below20 nm,and under the combined action of low flow rate and maximum applied voltage,the collection efficiency of 20-100 nm SP-BC could exceed 90%.In addition,the escape and capture characteristics of SP-BC under long-term rapping were revealed.The square-grooved collecting plate could effectively restrain the re-entrainment of collected SP-BC generated by rapping,and the nanoscale SP-BC was trapped in the grooves after rapping.The results could provide insights into the profound removal of massive nanoscale black carbon emissions from mobile sources.展开更多
In this work, 23 black soil profiles were surveyed and 113 soil samples were collected to determine the field capacity (FC) of the black soil in Northeast China. The effectiveness of three methods measuring FC, the Wi...In this work, 23 black soil profiles were surveyed and 113 soil samples were collected to determine the field capacity (FC) of the black soil in Northeast China. The effectiveness of three methods measuring FC, the Wilcox method (WM), the undisturbed soil pressure plate method (PUM) and the air-dried sieved soil pressure plate method (PDM) were compared to select a suitable laboratory measurement method. Results show that the FC values measured by PDM are greater than those measured by PUM, and the values measured by PUM are greater than those measured by WM. PUM is more suitable for the determination of FC in the study area. One regression equation between PUM and PDM has been established through which undisturbed soil can be replaced by air-dried sieved soil, which is easier to get, to measure FC. FCs vary from 23.50% to 37.00%, with an average of 31.65%, which differ greatly among the 23 black soil profiles. FC is found to be significantly positively correlated with the silt content, clay content and bulk density of the soil, but significantly negatively correlated with the sand content. An empirical pedotransfer function is established to estimate the FC using available soil physical and chemical properties.展开更多
文摘The effect of black plate on corrosion resistance of T5 tinplate was studied by glow discharge spectrograph, X-ray diffractometer （XRD）, stress tester, roughness tester and metallographic microscope. The result shows that black plate influences corrosion resistance of T5 tinplate intensely. It also indicates that the increase of content of manganese, phosphorus, silicon and aluminum in black plate would reduce the corrosion resistance of T5 tinplate and the increase of degree of crystal orientation on （200） crystal face, ｜X-Y｜ value （internal stress difference within two orientation）, roughness and exposure degree of iron grain after the same acid wash of black plate would enhance the corrosion resistance of T5 tinplate and the grain number of black plate has small effect on corrosion resistance of T5 tinplate.
文摘声学黑洞(Acoustic Black Hole,ABH)技术作为一种新型高效的能量聚焦以及振动控制技术,在减振降噪方面具有很好应用潜力。铝型材板结构作为一种夹层结构,具有高比刚度和高比强度等优异轻量化特性,广泛应用于列车外地板、船舶、航空航天等领域中。为了探究ABH和铝型材板结构相结合后是否还具有典型的ABH效应,运用有限元数值模拟方法研究嵌入式ABH铝型材板结构的振动能量聚焦特性。对于频点和频带聚焦特性分析结果表明,在铝型材板结构中嵌入ABH特征结构可以起到显著振动能量聚焦效果。此外,根据聚焦特性分析结果,在ABH铝型材板结构中的ABH特定区域内敷设阻尼材料,并通过仿真计算验证了其减振特性。结果表明,由ABH铝型材板结构附加阻尼材料所得的组合结构振动水平显著低于普通铝型材板结构,部分频率下振动衰减高达52.6 dB。这为轨道交通领域提供了一种很有应用潜力的结构减振降噪新思路。
基金supported by the National Natural Science Foundation (No.52076191)Key Research&Development Plan of Shandong Province (No.2020CXGC011401)。
文摘Ships and other mobile pollution sources emitted massive ultrafine and low-resistivity particles containing black carbon(BC),which were harmful to human health and were difficult to capture by conventional electrostatic precipitators(ESPs).In this study,nanoscale carbon black was adopted as simulated particles(SP)with similar physicochemical properties for black carbon emitted from ships(SP-BC)to investigate the feasibility of using an ESP with square-grooved collecting plates for the removal of SP-BC at low backpressures.The increased applied voltage significantly improved the total collection of SP-BC whereas may also promote the conversion of relatively larger particle size SP-BC into nano-size below 20nm.The outlet number concentration of SP-BC under 27 kV at 130℃was three times that of the inlet.While the reduction of the flow rate could strengthen the capture of SP-BC below20 nm,and under the combined action of low flow rate and maximum applied voltage,the collection efficiency of 20-100 nm SP-BC could exceed 90%.In addition,the escape and capture characteristics of SP-BC under long-term rapping were revealed.The square-grooved collecting plate could effectively restrain the re-entrainment of collected SP-BC generated by rapping,and the nanoscale SP-BC was trapped in the grooves after rapping.The results could provide insights into the profound removal of massive nanoscale black carbon emissions from mobile sources.
基金Under the auspices of National Natural Science Foundation of China(No.40671111)Major State Basic Research Development Program of China(No.2007CB407203)
文摘In this work, 23 black soil profiles were surveyed and 113 soil samples were collected to determine the field capacity (FC) of the black soil in Northeast China. The effectiveness of three methods measuring FC, the Wilcox method (WM), the undisturbed soil pressure plate method (PUM) and the air-dried sieved soil pressure plate method (PDM) were compared to select a suitable laboratory measurement method. Results show that the FC values measured by PDM are greater than those measured by PUM, and the values measured by PUM are greater than those measured by WM. PUM is more suitable for the determination of FC in the study area. One regression equation between PUM and PDM has been established through which undisturbed soil can be replaced by air-dried sieved soil, which is easier to get, to measure FC. FCs vary from 23.50% to 37.00%, with an average of 31.65%, which differ greatly among the 23 black soil profiles. FC is found to be significantly positively correlated with the silt content, clay content and bulk density of the soil, but significantly negatively correlated with the sand content. An empirical pedotransfer function is established to estimate the FC using available soil physical and chemical properties.
文摘基于螺旋声学黑洞的波导吸振器(waveguide absorber,WGA)是为解决声学黑洞尖端厚度过薄、截止频率较高等问题而提出的新构型,目前其设计方法、耗能机理和减振应用效果有待进一步研究.研究基于几何声学理论和欧拉-伯努利梁理论,提出了WGA的设计方法,构建了WGA材料参数和几何参数选取的理论模型,通过数值仿真揭示了WGA设计参数对弯曲波波数虚部的影响规律,阐明了几何参数对于截止频率的调控机制,进一步从时域和频域的角度分析了WGA的弯曲波耗散机理.开展加筋板减振实验研究对比验证了设计方法的可靠性和WGA的减振效果.结果表明,研究提出的设计方法可使WGA在更大尖端厚度的条件下获得更低的反射系数和截止频率,在降低加工难度的条件下提高其减振效果和适用范围.安装WGA后的加筋板在10~1000 Hz内加速度级降低可达26 d B,减振效果显著优于等质量阻尼层.新设计的WGA具有易安装、减振频带宽、低频减振效果好和对结构固有振动特性影响小等优点.研究为WGA的设计及其在结构减振工程中的应用提供了指导.
