Sedimentary Environment and Mineralization of the Black Shale Polymetallic Layer in the Early Cambrian,SW China:Constraints from in situ LA-ICP-MS Analysis of Pyrite

A polymetallic layer is usually developed at the bottom of the early Cambrian black shale in Guizhou Province.The mineral that makes up the polymetallic layer is related to the sedimentary facies.To analyze the differentiation mechanism between polymetallic deposits(Ni-Mo and V),the Zhijin Gezhongwu profile located in the outer shelf and the Sansui Haishan V deposit located in the lower slope are selected to study the in situ sulfur isotopes and trace elements of pyrite.The results show that δ^(34)S values of pyrite vary widely from−7.8‰to 28‰in the Gezhongwu profile,while the δ^(34)S values are relatively uniform(from 27.8‰to 38.4‰)in the Haishan profile.The isotopic S composition is consistent with the transition that occurs in the sedimentary phase from the shelf to the deep sea on the transgressive Yangtze platform;this indicates that the δ^(34)SO_(4)^(2−)values in seawater must be differently distributed in depositional environments.The sulfur in the Ni-Mo layer is produced after the mixing of seawater and hydrothermal fluid,while the V layer mainly originates from seawater.Overall,the Ni-Mo and V deposits have been differentiated primarily on the basis of the combined effect of continental weathering and hydrothermal fluid.

Formation,evolution,reconstruction of black shales and their influence on shale oil and gas resource

Black shales are important products of material cycling and energy exchange among the lithosphere,atmosphere,hydrosphere,and biosphere.They are widely distributed throughout geological history and provide essential energy and mineral resources for the development of human society.They also record the evolution process of the earth and improve the understanding of the earth.This review focuses on the diagenesis and formation mechanisms of black shales sedimentation,composition,evolution,and reconstruction,which have had a significant impact on the formation and enrichment of shale oil and gas.In terms of sedimentary environment,black shales can be classified into three types:Marine,terrestrial,and marine-terrestrial transitional facies.The formation processes include mechanisms such as eolian input,hypopycnal flow,gravity-driven and offshore bottom currents.From a geological perspective,the formation of black shales is often closely related to global or regional major geological events.The enrichment of organic matter is generally the result of the interaction and coupling of several factors such as primary productivity,water redox condition,and sedimentation rate.In terms of evolution,black shales have undergone diagenetic evolution of inorganic minerals,thermal evolution of organic matter and hydrocarbon generation,interactions between organic matter and inorganic minerals,and pore evolution.In terms of reconstruction,the effects of fold deformation,uplift and erosion,and fracturing have changed the stress state of black shale reservoirs,thereby having a significant impact on the pore structure.Fluid activity promotes the formation of veins,and have changed the material composition,stress structure,and reservoir properties of black shales.Regarding resource effects,the deposition of black shales is fundamental for shale oil and gas resources,the evolution of black shales promotes the shale oil and gas formation and storage,and the reconstruction of black shales would have caused the heterogeneous distribution of oil and gas in shales.Exploring the formation mechanisms and interactions of black shales at different scales is a key to in-depth research on shale formation and evolution,as well as the key to revealing the mechanism controlling shale oil and gas accumulation.The present records can reveal how these processes worked in geological history,and improve our understanding of the coupling mechanisms among regional geological events,black shales evolution,and shale oil and gas formation and enrichment.

齿轮泵在炭黑生产中输送BS溶液的应用效果分析

本文通过实践应用分析,验证了在炭黑生产中使用齿轮泵替换螺杆泵输送BS溶液,可以使炭黑造粒控制更加稳定,且运行过程中故障率低、压力波动小、更节能。

Burial Records of Reactive Iron in Cretaceous Black Shales and Oceanic Red Beds from Southern Tibet

One of the new directions in the field of Cretaceous research is to elucidate the mechanism of the sedimentary transition from the Cretaceous black shales to oceanic red beds. A chemical sequential extraction method was applied to these two types of rocks from southern Tibet to investigate the burial records of reactive iron. Results indicate that carbonate-associated iron and pyrite are relatively enriched in the black shales, but depleted or absent in red beds. The main feature of the reactive iron in the red beds is relative enrichment of iron oxides （largely hematite）, which occurred during syn-depostion or early diagenesis. The ratio between iron oxides and the total iron indicates an oxygen-enriched environment for red bed deposition. A comparison between the reactive iron burial records and proxies of paleo-productivity suggests that paleo-productivity decreases when the ratio between iron oxides and the total iron increases in the red beds. This phenomenon could imply that the relationship between marine redox and productivity might be one of the reasons for the sedimentary transition from Cretaceous black shale to oceanic red bed deposition.

Paleoceanographic Indicators for Early Cambrian Black Shales from the Yangtze Platform, South China: Evidence from Biomarkers and Carbon Isotopes

The lower Cambrian Niutitang Formation, a widespread black shale deposition, is of geological interest because of its polymetallic beds, Cambrian explosion, depositional ages, dramatic environmental changes and so on. Previous study focused mainly on inorganic geochemistry and few studies have investigated the organic fractions of upper Neoproterozoic-lower Cambrian strata in South China. Here we report a study of biomarkers plus organic carbon isotopes for black shales from Ganziping, Hunan Province （China）. All the saturated hydrocarbon fractions have a unimodal distribution of n-alkanes, a high content of short-chain alkanes and maximize at C 19 or C 20 （C 23 for sample Gzh00-1）. The C 27 /C 29 sterane ratio ranges from 0.77 to 1.20 and 4-methylsteranes are in low abundance. These parameters indicate that algae and bacteria are the important primary producers. Furthermore, biomarker maturity proxies show the samples to be higher maturity. The low Pr/Ph values （0.7） suggest that the samples were deposited under anoxic conditions and, likely, under stratified water columns. In addition, 25-norhopanes and gammacerane are present as diagnostic indicators of normal marine salinity and dysoxic to anoxic conditions. During the Early Tommotian, known to coincide with a transgression event, small shelly fossils increased in abundance and diversity. Moreover, positive δ 13 C org excursions close to 1.4‰ occur at the base of the Tommotian stage. In summary, the Early Cambrian black shales were deposited under dramatic paleoenvironmental changes, including oceanic anoxia, higher primary productivity and sea-level rise.

Controls on the organic carbon content of the lower Cambrian black shale in the southeastern margin of Upper Yangtze

Control of various factors, including mineral components, primary productivity and redox level, on the total organic carbon(TOC) in the lower Cambrian black shale from southeastern margin of Upper Yangtze(Taozichong, Longbizui and Yanbei areas) is discussed in detail in this article. Mineral components in the study strata are dominated by quartz and clay minerals. Quartz in the Niutitang Formation is mainly of biogenic origin, and the content is in positive correlation with TOC, while the content of clay minerals is negatively correlated with TOC. Primary productivity, represented by the content of Mobio(biogenic molybdenum), Babio(biogenic barium) and phosphorus, is positively correlated with TOC. The main alkanes in studied samples are nCC, and odd–even priority values are closed to 1(0.73–1.13), which suggest the organic matter source was marine plankton. Element content ratios of U/Th and Ni/Co and compound ratio Pr/Ph indicate dysoxic–anoxic bottom water, with weak positive relative with TOC. In total, three main points can be drawn to explain the relationship between data and the factors affecting organic accumulation:(1) quartz-rich and clay-mineral-poor deep shelf–slope–basin environment was favorable for living organisms;(2) high productivity provided the material foundation for organic generation;(3) the redox conditions impact slightly on the content of organic matter under high productivity and dysoxic–anoxic condition.

Response of Reactive Phosphorus Burial to the Sedimentary Transition from Cretaceous Black Shales to Oceanic Red Beds in Southern Tibet

The mechanism of sedimentary transition from the Cretaceous black shales to the oceanic red beds is a new and important direction of Cretaceous research. Chemical sequential extraction is applied to study the burial records of reactive phosphorus in the black shale of the Gyabula Formation and oceanic red beds of the Chuangde Formation, Southern Tibet. Results indicate that the principal reactive phosphorus species is the authigenic and carbonate-associated phosphorus （CAP） in the Gyabula Formation and iron oxides-associated phosphorus （FeP） in the Chuangde Formation which accounts for more than half of their own total phosphorus content. While the authigenic and carbonate-associated phosphorus （CAP） is almost equal in the two Formations; the iron oxidesassociated phosphorus is about 1.6 times higher in the Chuangde Formation than that in the Gyabula Formation resulting in a higher content of the total phosphorus in the Chuangde Formation. According to the observations on the marine phosphorus cyde in Modern Ocean, it is found that preferential burial and regeneration of reactive phosphorus corresponds to highly oxic and reducing conditions, respectively, leading to the different distribution of phosphorus in these two distinct type of marine sediments. It is the redox-sensitive behavior of phosphorus cycle to the different redox conditions in the ocean and the controlling effects of phosphorus to the marine production that stimulate the local sedimentary transition from the Cretaceous black shale to the oceanic red beds.

Accumulation Conditions of Organic Matter during the Deposition of Black Shales of the Buxin Formation (Early Paleogene) in the Sanshui Basin, South China

Analyses of organic carbon, nitrogen, sulfur and iron have been performed in order to understand sources and preservation of organic matter in black shale of the Buxin Formation (Early Paleogene) from the Sanshui Basin. The C/N ratios show that the organic matter is characterized by a mixture of terrestrial and phytoplanktonic contributions. The relative importance of different sources depend on climate conditions and most of organic matter is of terrestrial origin. The relationships between C, S and Fe indicate that the brackish environment with alternation of anoxia and low-O2 developed in the bottom waters during the deposition of these organic-rich sediments as a result of a mixed setting of thermal stratification and salinity stratification, the latter being the consequence of intermittent sea water incursion. Bacterial sulfate reduction is the most effective early diagenesis affecting the preservation of organic matter. The intensity of sulfate reduction is related to the relative proportion of metabolizable organic matter supplied to sediments.

Jurassic Black Shales Facies from Qiangtang Basin (Northern Tibet): Rare Earth and Trace Elements for Paleoceanographic Implications

The Biluo Co and Amdo 114 station, northern Tibet, cropping out the Early Toarcian and Middle-Late Tithonian （Jurassic） organic-rich black shales, have been a focus to petroleum geologists in discussing their oil-producing potential. This paper first reports the trace elements and rare earth elements to discuss the paleoenvironments, redox conditions and sedimentary mechanisms of those black shales. Both sections exhibit variation in trace element abundances with concentrations 〈0.1 ppm to 760 ppm, mostly enriched in V, Cr, Ni, Cu, Zn, Mo, Ba and U. Element ratios of Ni/Co, V/Cr, U/Th and V/（V＋Ni） plus U were used to identify redox conditions. The shale-normalized rare earth element （REE） patterns are characterized by the flat-shale type with instable Ce anomalies and very weekly positive Eu anomalies. Positive Ceanom values are significant with values varying between - 0.064 and 0.029 in Biluo Co, which may be interpreted as release of REE and input of riverine terrestrial matter with rich Ce （resulting in pH change） during the anoxic conditions. In the middle parts of Amdo 114 station, distinct negative Ceanom values are observed （-0.238 to -0.111） and associated surface water warming were interpreted as being related to a major sea level rise. In contrast, the formation of the black shales in the lower and upper part of the studied succession took place during a cooler （Ceanom values 〉-0.10）, lower surface water productivity, and lower sea-level stage. Thus, we emphasize the role of different factors that control the formation of local and regional black shales. The most important factors are sea-level fluctuations and increasing productivity.

The Trace Element Distribution Patterns of Ediacaran-Early Cambrian Black Shales and the Origin of Selenium in the Guangning Area, Western Guangdong Province, South China

The Ediacaran and early Cambrian black shales are widespread across the South China Craton （Yangtze and Cathaysia blocks）. However, the trace element distribution patterns of the Ediacaran and early Cambrian black shales in the Cathaysia Block are still unclear. In this study, thirty- four black shale samples in the Lechangxia Group （Ediacaran） and thirteen black shale samples in the lower Bacun Group （early Cambrian） from Guangning area, western Guangdong Province, South China, were analyzed for major and trace elements concentrations. Compared to the upper continental crust, the Ediacaran black shales exhibit strongly enriched Se, Ga, and As with enrichment factor values （EF） higher than 10, significantly enrichedBi and Rb （10〉EF〉5）, weakly enriched Mo, Ba, Cs, V, In, Be, TI, and Th （5〉EF〉2）, normal U, Cr, Cd, Sc, Pb, Cu, and Li （2〉EF〉0.5）, and depleted Ni, Zn, Sr, and Co. Early Cambrian black shales display strongly enriched Se, Ga, and As, significantly enriched Ba, Bi, and Rb, weakly enriched Mo, Cs, Cd, V, U, Be, In, and TI, normal Sc, Th, Cr, Li, Cu, Ni, and Pb and depleted Co, Zn, and Sr. Moreover, Se is the most enriched trace element in the Ediacaran and early Cambrian black shales： concentrations vary from 0.25 to 30.09 ppm and 0.54 to 5.01 ppm, and averaging 4.84 and 1.72 ppm, with average EF values of 96.87 and 34.32, for the Ediacaran and early Cambrian shales respectively. The average concentration of Se in the Ediacaran black shales is 2.8 times higher than that of early Cambrian black shales. Se contents in the Ediacaran and early Cambrian black shales exhibit significant variation （P = 0.03）. Provenance analysis showed that Se contents of both the Ediacaran and early Cambrian black shales were without detrital provenance and volcanoclastic sources, hut of hydrothermal origin. The deep sources of Se and the presence of pyrite may explain the higher Se contents in the Ediacaran black shales. Similar with the Se-rich characteristics of the contemporaneous black shales in the south Qingling Mountain and Yangtze block, the Ediacaran and early Cambrian black shales in Guangning area, Cathaysia, are also enriched in Se, which may provide a clue for looking for the selenium-rich resources in western Guangdong Province.

Pressure acid leaching of black shale for extraction of vanadium

Extraction of vanadium from black shale was attempted in pressure acid leaching.The chemical components of the sample obtained from Guizhou Province of China show that it contains 3.258%V2O5,52.880%SiO2 and 16.140%Al2O3.Phase analyses of vanadium indicates vanadium mainly exists in the free oxide and mica.Vanadium contents in the two phases are 18%and 53%, respectively.The contents of V3 +,V 4+and V 5+are almost equal.Under the optimum parameters of one-step leaching(reaction time of 3 h,sulfuric addition of 25%,temperature of 150℃,liquid to solid ratio of 1.2 mL/g,catalyst(FeSO4)addition of 5%and size of 85%particle 0.074 mm),about 77%of vanadium is recovered.After two-step countercurrent leaching,the leach recovery of vanadium can reach above 90%.Air replacing oxygen is completely feasible.The impurity metals can dissolve into solution in different degrees.

Recovery of vanadium from black shale

The recovery of vanadium from a black shale from Guizhou Province of China was performed using a three-step process, which consists of a leaching step in the H2SO4-HF-NaClO system under atmospheric pressure,the vanadium separation from leachate by solvent extraction and stripping,followed by precipitation of ammonium vanadate and thermal decomposition.Under the optimum leaching conditions of 100 g/L sulfuric,15 g/L hydrofluoric acid,1.5 g/L NaClO,6 h leaching at 90℃and oxygen partial pressure of 1 200 kPa,and the liquid-to-solid ratio of 2,about 91%vanadium extraction is achieved.The vanadium extraction yields of solvent and stripping are 99.83%and 97.66%when using 10%(volume fraction)P204,5%TBP and 85%sulfonated berosene as organic phase and 15%(mass fraction)sulphuric acid as stripping agent.After thermal decomposition the purity of powder vanadium pentoxide products is 99.18%and the overall vanadium recovery is over 81%in the whole process.

Preliminary Estimation of Paleoproductivity via TOC and Habitat Types:Which Method Is More Reliable?—A Case Study on the Ordovician-Silurian Transitional Black Shales of the Upper Yangtze Platform, South China

New total organic carbon （TOC） data from the two Ordovician-Silurian transitional graptolite-bearing black shale intervals, the Wufeng （五峰） Formation and the Longmaxi （龙马溪） Formation in Central Guizhou （贵州） and West Hubei （湖北）, respectively, as well as previously reported TOC data from the same intervals in other places on the Yangtze platform of South China, have been used to produce an initial estimate of the primary paleoproductivity via a conventional inverse method （i.e., Rpp.inverse）. The values of the Rpp.inverse are estimated to be 32 （43-21） gC/（m^2·a）（Wufeng Formation） and 21 （27-16） gC/（m^2·a） （Longmaxi Formation）. Also, simultaneously, the habitat types （i.e., HT; cf., BA： benthic assemblage） and their temporal and spatial changes have been documented from the same succession, and an initial estimate of the primary paleoproductivity has been produced using a forward method （i.e., Rpp-forward） Beingbounded mainly by the peritidal to inner-shelf environment shelly-facies or mixed-facies successions with BA1 to BA3 faunas both at the top and the base, which indicates the habitat types from HT Ⅱ to HT Ⅲ2, the biohabitat type of the two graptolite-bearing black shale intervals can be limited to HT III to HT IV, corresponding to the inner shelf to the outer shelf, with depths from roughly 60 m to 200-300 m. Based on the current data from the South China Sea and the southern part of the East China Sea, values of Rpp-forward should be about 100 to 400 gC/（m^2·a）. The difference in the results via the two methods suggests that paleoproductivity estimates from the geological strata need to be made cautiously, with particular attention paid to the paleogeographic setting, oxic-anoxic conditions, as also the preservation factor of organic carbon.

Subaqueous early eruptive phase of the late Aptian Rajmahal volcanism,India:Evidence from volcaniclastic rocks,bentonite,black shales,and oolite

The late Aptian（118-115 Ma） continental flood basalts of the Rajmahal Volcanic Province（RVP） are part of the Kerguelen Large Igneous Province,and constitute the uppermost part of the Gondwana Supergroup on the eastern Indian shield margin.The lower one-third of the Rajmahal volcanic succession contains thin layers of plant fossil-rich inter-trappean sedimentary rocks with pyroclasts,bentonite,grey and black shale/mudstone and oolite,whereas the upper two-thirds consist of sub-aerial fine-grained aphyric basalts with no inter-trappean material.At the eastern margin and the north-central sector of the RVP,the volcanics in the lower part include rhyolites and dacites overlain by enstatite-bearing basalts and enstatite-andesites.The pyroclastic rocks are largely felsic in composition,and comprise ignimbrite as well as coarse-grained tuff with lithic clasts,and tuff breccia with bombs,lapilli and ash that indicate explosive eruption of viscous rhyolitic magma.The rhyolites/dacites（〉68 wt.%） are separated from the andesites（〈 60 wt.%） by a gap in silica content indicating their formation through upper crustal anatexis with only heat supplied by the basaltic magma.On the other hand,partially melted siltstone xenoliths in enstatite-bearing basalts suggest that the enstatite-andesites originated through mixing of the upper crust with basaltic magma,crystallizing orthopyroxene at a pressure-temperature of ~3 kb/1150℃.In contrast,the northwestern sector of the RVP is devoid of felsic-intermediate rocks,and the volcaniclastic rocks are predominantly mafic（basaltic） in composition.Here,the presence of fine-grained tuffs,tuff breccia containing sideromelane shards and quenched texture,welded tuff breccia,peperite,shale/mudstone and oolite substantiates a subaqueous environment.Based on these observations,we conclude that the early phase of Rajmahal volcanism occurred under predominantly subaqueous conditions.The presence of grey and black shale/mudstone in the lower one-third of the succession across the entire Rajmahal basin provides unequivocal evidence of a shallow-marine continental shelf-type environment.Alignment of the Rajmahal eruptive centers with a major N—S mid-Neoproterozoic lineament and the presence of a gravity high on the RVP suggest a tectonic control for the eruption of melts associated with the Kerguelen plume that was active in a post-Gondwana rift between India and Australia-Antarctica.

Characterization and separation of pyrite from Abu Tartur black shale

This work aimed for pyrite separation from Abu Tartur black shale as a source of sulfur to be an added economic value of Abu Tartur area. The considered samples in the present work were collected from a core drilled in Abu Tartur plateau representing the pyrite-rich black shale of the U. Cretaceous age.Sample characterization was carried out using petrographic microscope, XRD, DTA/DTG, C/S and XRF techniques. Clay minerals, silt-sized quartz, calcite, and hematite were the main minerals associating pyrite(5.34%). Liberation behavior of the sample was about 80% below 5 lm.Sample processing was achieved through one-day soaking followed by classification using 1 inch Mozley hydro-cyclone where about 35.5% by weight went to underflow and 64.5% went to overflow.The underflow product was subjected to an advanced gravity separation process using SB-40 Falcon Concentrator through a CCD statistical design prepared by Design-Expert 6.0 software proposed to optimize the separation process through a study for the effects of frequency(Hz) and water pressure(Psi) on both assay and recovery of the sulfur-rich heavy fraction.A heavy concentrate weighed 10.90% with inorganic sulfur content reached 11.37%(21.24% pyrite) with overall recovery(50.01%) was obtained after two cleaning at the optimum conditions.

Uraniferous Black Shale and Related Uranium Mineralization Features in South China

Black shales are marine sediments with argillaceous, silty and siliceous compositions and high contents of organic materials, disseminated pyrite and uranium. Uraniferous black shale has uranium content of more than 20 ppm.

Black shale formation enviro nment and its control on shale oil enrichment in Triassic Chang 7 Member,Ordos Basin,NW China

Based on geochemical analysis results of core samples from the Triassic Chang 7 Member of Well Feng 75 drilled in the northwest margin of Ordos Basin,combined with geological characteristics of this region,the formation environment of the black shale and its control on shale oil enrichment are comprehensively studied.From the Chang 73 to Chang 71 Sub-members,the black shale have organic carbon contents decreasing from 5.70%to 3.55%,hydrogen indexes decreasing from 345 mg/g to 269 mg/g,while the oxygen indexes increasing gradually from 6 mg/g to 29 mg/g,indicating that the sedimentary environment during the depositional period of Chang 72 and Chang 73 Sub-members was anoxic.Biomarkers in the black shale change regu-larly,and have an obvious“inflection point”at the depth of 2753–2777 m in the Chang 73 Sub-member,indicating that the input of terrigenous organic matter increased.However,there is a negative drift about 2%of organic carbon isotopic composition near the“inflection point”,which is in conflict with the results of biomarker compounds.This is because the extreme thermal and anoxic events caused by continental volcanic activity in the ancient Qinling region caused negative drift of carbon isotopic composition of the black shale in the Ordos Basin.The volcanic activity caused rise of temperature,polluted air,extreme weathers,more floods and thus more input of terrigenous organic matter,and gave rise to extremely anoxic environment con-ducive to the preservation of organic matter.Terrigenous organic matter is more conducive to the formation of light oil than aquatic organic matter,so these sections in Yanchang Formation are major“sweet spots”for shale oil enrichment.

Source of silica and its implications for organic matter enrichment in the Upper Ordovician-Lower Silurian black shale in western Hubei Province,China:Insights from geochemical and petrological analysis

To improve the understanding of the relationship between silica source and organic matter accumulation,the origin of silica and its implications for organic matter enrichment in the Upper OrdovicianLower Silurian(O_(3)w-S_(1)l)black shale in western Hubei Province in the middle Yangtze area,were investigated through geochemical and petrological analyses.The results show that the O_(3)w-S_(1)l black shale is mainly composed of five lithofacies with varying graptolite abundance,total organic carbon(TOC),and silica contents.Biogenic silica and terrigenous siliciclastic input constitute the main silica sources in O_(3)w-S_(1)l black shale and they exhibit an upward inverse variation trend interpreted to be related to sea-level changes.Moreover,with the increase in biogenic silica content or decrease in terrigenous siliciclastic input,TOC values in black shale initially rise and then fall,which is different from originally expected simple linear relationship.We infer that organic matter enrichment and the distribution of silica from different origins are controlled by sea-level changes and variations in terrigenous input in a continental shelf with little hydrothermal influence.An environment with appropriate sea level and terrigenous input should be most favorable for organic matter accumulation,rather than one with excessive high sea level and less terrigenous input.

Elemental characterization of black shales of Khyber Pakthunkhawa (KPK) region of Pakistan using AAS

Black shale samples were collected from Chimiari Khyber Pakthunkhawa region of Pakistan and were analyzed for elemental compositions. Atomic Absorption Spectrophotometry (AAS) was utilized for the determination of elements in the digested solutions. The analysis of black shale was performed precisely with relative standard deviation (RSD) lower than 2%. Results showed that the samples contained high concentrations of Ca (11.98 %), Al (7.09%), Fe (3.03%), Mg (0.59%) and Ti (0.58%).

Extraction of nickel from molybdenum leaching residue of metalliferous black shale by segregation roasting and acid leaching

The recovery of nickel from molybdenum leach residue by the process of segregation roasting-sulfuric acid leaching-solvent extraction was investigated. The residue was characterized by microscopic investigations, using X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD) techniques and the residue after segregation roasting was characterized by chemical phase analysis method. A series of experiments were conducted to examine the mass ratio of activated carbon (AC) to the residue, segregation roasting time and temperature, sulfuric acid concentration, liquid-to-solid ratio, leaching time, leaching temperature, addition amount of 30% H2O2, stirring speed (a constant) on the leaching efficiency of nickel. A maximum nickel leaching efficiency of 90.5% is achieved with the mass ratio of AC to the residue of 1:2.5, segregation roasting time of 2 h, segregation roasting temperature of 850 °C, sulfuric acid concentration of 4.5 mol/L, liquid-to-solid ratio of 6:1, leaching time of 5 h, leaching temperature of 80 °C, addition of 30% H2O2 of 0.6 mL for 1 g dry residue. Under these optimized conditions, the average leaching efficiency of nickel is 89.3%. The nickel extraction efficiency in the examined conditions is about 99.6%, and the nickel stripping efficiency in the examined conditions is about 99.2%.