This paper focuses on aeroelastic prediction and analysis for a transonic fan rotor with only its“hot”(running)blade shape available,which is often the case in practical engineering such as in the design stage.Based...This paper focuses on aeroelastic prediction and analysis for a transonic fan rotor with only its“hot”(running)blade shape available,which is often the case in practical engineering such as in the design stage.Based on an in-house and well-validated CFD solver and a hybrid structural finite element modeling/modal approach,three main aspects are considered with special emphasis on dealing with the“hot”blade shape.First,static aeroelastic analysis is presented for shape transformation between“cold”(manufacturing)and“hot”blades,and influence of the dynamic variation of“hot”shape on evaluated aerodynamic performance is investigated.Second,implementation of the energy method for flutter prediction is given and both a regularly used fixed“hot”shape and a variable“hot”shape are considered.Through comparison,influence of the dynamic variation of“hot”shape on evaluated aeroelastic stability is also investigated.Third,another common way to predict flutter,time-domain method,is used for the same concerned case,from which the predicted flutter characteristics are compared with those from the energy method.A well-publicized axial-flow transonic fan rotor,Rotor 67,is selected as a typical example,and the corresponding numerical results and discussions are presented in detail.展开更多
In view of the supercavitation effect, a novel device named the rotational supercavitating evaporator (RSCE) has been designed for the desalination. In order to improve the blade shape of the rotational cavitator in t...In view of the supercavitation effect, a novel device named the rotational supercavitating evaporator (RSCE) has been designed for the desalination. In order to improve the blade shape of the rotational cavitator in the RSCE for the performance optimization, the blade shapes of different sizes are designed by utilizing the improved calculation method for the blade shape and the validated empirical formulae based on previous two-dimensional numerical simulations, from which the optimized blade shape with the wedge angle of 45° and the design speed of 5 000 r/min is selected. The estimation method for the desalination performance parameters is developed to validate the feasibility of the utilization of the results obtained by the two-dimensional numerical simulations in the design of the three-dimensional blade shape. Three-dimensional numerical simulations are then conducted for the supercavitating flows around the rotational cavitator with the optimized blade shape at different rotational speeds to obtain the morphological characteristics of the rotational natural supercavitation. The results show that the profile of the supercavity tail is concaved toward the inside of the supercavity due to the re-entrant jet. The empirical formulae for estimating the supercavity size with consideration of the rotation are obtained by fitting the data, with the exponents different from those obtained by the previous two-dimensional numerical simulations. The influences of the rotation on the morphological characteristics are analyzed from the perspectives of the tip and hub vortices and the interaction between the supercavity tail and the blade. Further numerical simulation of the supercavitating flow around the rotational cavitator made up by the blades with exit edge of uniform thickness illustrate that the morphological characteristics are also affected by the blade shape.展开更多
A turbine blade is one of the key components of the aero-engine. Its geometric shape should be inspected carefully in the production stage to ensure that it meets the tolerance specification. In the present paper, an ...A turbine blade is one of the key components of the aero-engine. Its geometric shape should be inspected carefully in the production stage to ensure that it meets the tolerance specification. In the present paper, an approach for investment turbine blade geometric shape analysis based on multi-source digital measurement is presented. Its key technologies, such as measurement data collection, blade model reliable alignment, geometric shape deviation fast calculation and visualization, were investigated. Actual measurement data from a structure light measurement device and a Coordinate Measuring Machine(CMM) for turbine blades were used to validate the presented method. The experimental results show that the proposed method is accurate, quick and effective to implement.展开更多
A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the...A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the helicopter rotor with an anhedral blade tip and is emphasized to be applicable to various blade tip configurations, such as the tapered, swept, anhedral and combined shapes. Sample calculations on the rotor aerodynamic characteristics for different anhedral tips in both hover and forward flight are performed. The results on the induced velocity, blade section lift distribution, tip vortex path and rotor performance are presented so that the effect of the anhedral tip on the rotor aerodynamic characteristics is fully analyzed.展开更多
In this article a new principle of geometric design for blade's surface of an impeller is provided.This is an optimal control problem for the boundary geometric shape of flow and the control variable is the surfac...In this article a new principle of geometric design for blade's surface of an impeller is provided.This is an optimal control problem for the boundary geometric shape of flow and the control variable is the surface of the blade.We give a minimal functional depending on the geometry of the blade's surface and such that the flow's loss achieves minimum.The existence of the solution of the optimal control problem is proved and the Euler-Lagrange equations for the surface of the blade are derived.In addition,under a new curvilinear coordinate system,the flow domain between the two blades becomes a fixed hexahedron,and the surface as a mapping from a bounded domain in R2 into R3,is explicitly appearing in the objective functional.The Navier-Stokes equations,which include the mapping in their coefficients,can be computed by using operator splitting algorithm.Furthermore,derivatives of the solution of Navier-Stokes equations with respect to the mapping satisfy linearized Navier-Stokes equations which can be solved by using operator splitting algorithms too.Hence,a conjugate gradient method can be used to solve the optimal control problem.展开更多
Film cooling is introduction of a secondary fluid （coolant or injected fluid） at one or more discrete locations along a surface exposed to a high temperature environment to protect that surface not only in the immed...Film cooling is introduction of a secondary fluid （coolant or injected fluid） at one or more discrete locations along a surface exposed to a high temperature environment to protect that surface not only in the immediate region of injection but also downstream region. This paper numerically investigated the film cooling effectiveness on two types of hole geometries which are cut-shaped hole and antivortex hole. The 3D computational geometries are modeled with a single 30 deg angled hole on a flat surface. The different blowing ratios of 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5,5 and k-Epsilon turbulence model are used in this study. A two dimensional distribution of film cooling effectiveness in the downstream region of the cooling hole is performed. A comparison of spanwise averaged effectiveness is also performed in the field starts from center point of hole to X/D=-30.展开更多
基金This study was supported by National Natural Science Foundation of China(No.11872212),China Postdoctoral Science Foundation Grant(No.2019M650112),Natural Science Foundation of Jiangsu Province,China(No.BK20190386)a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China.
文摘This paper focuses on aeroelastic prediction and analysis for a transonic fan rotor with only its“hot”(running)blade shape available,which is often the case in practical engineering such as in the design stage.Based on an in-house and well-validated CFD solver and a hybrid structural finite element modeling/modal approach,three main aspects are considered with special emphasis on dealing with the“hot”blade shape.First,static aeroelastic analysis is presented for shape transformation between“cold”(manufacturing)and“hot”blades,and influence of the dynamic variation of“hot”shape on evaluated aerodynamic performance is investigated.Second,implementation of the energy method for flutter prediction is given and both a regularly used fixed“hot”shape and a variable“hot”shape are considered.Through comparison,influence of the dynamic variation of“hot”shape on evaluated aeroelastic stability is also investigated.Third,another common way to predict flutter,time-domain method,is used for the same concerned case,from which the predicted flutter characteristics are compared with those from the energy method.A well-publicized axial-flow transonic fan rotor,Rotor 67,is selected as a typical example,and the corresponding numerical results and discussions are presented in detail.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51806051,51706050,51276046 and 51576051).
文摘In view of the supercavitation effect, a novel device named the rotational supercavitating evaporator (RSCE) has been designed for the desalination. In order to improve the blade shape of the rotational cavitator in the RSCE for the performance optimization, the blade shapes of different sizes are designed by utilizing the improved calculation method for the blade shape and the validated empirical formulae based on previous two-dimensional numerical simulations, from which the optimized blade shape with the wedge angle of 45° and the design speed of 5 000 r/min is selected. The estimation method for the desalination performance parameters is developed to validate the feasibility of the utilization of the results obtained by the two-dimensional numerical simulations in the design of the three-dimensional blade shape. Three-dimensional numerical simulations are then conducted for the supercavitating flows around the rotational cavitator with the optimized blade shape at different rotational speeds to obtain the morphological characteristics of the rotational natural supercavitation. The results show that the profile of the supercavity tail is concaved toward the inside of the supercavity due to the re-entrant jet. The empirical formulae for estimating the supercavity size with consideration of the rotation are obtained by fitting the data, with the exponents different from those obtained by the previous two-dimensional numerical simulations. The influences of the rotation on the morphological characteristics are analyzed from the perspectives of the tip and hub vortices and the interaction between the supercavity tail and the blade. Further numerical simulation of the supercavitating flow around the rotational cavitator made up by the blades with exit edge of uniform thickness illustrate that the morphological characteristics are also affected by the blade shape.
基金financially supported by the Major National S&T Project(No.2012ZX04007021)Doctoral fund of China(No.2013YD050008)
文摘A turbine blade is one of the key components of the aero-engine. Its geometric shape should be inspected carefully in the production stage to ensure that it meets the tolerance specification. In the present paper, an approach for investment turbine blade geometric shape analysis based on multi-source digital measurement is presented. Its key technologies, such as measurement data collection, blade model reliable alignment, geometric shape deviation fast calculation and visualization, were investigated. Actual measurement data from a structure light measurement device and a Coordinate Measuring Machine(CMM) for turbine blades were used to validate the presented method. The experimental results show that the proposed method is accurate, quick and effective to implement.
文摘A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the helicopter rotor with an anhedral blade tip and is emphasized to be applicable to various blade tip configurations, such as the tapered, swept, anhedral and combined shapes. Sample calculations on the rotor aerodynamic characteristics for different anhedral tips in both hover and forward flight are performed. The results on the induced velocity, blade section lift distribution, tip vortex path and rotor performance are presented so that the effect of the anhedral tip on the rotor aerodynamic characteristics is fully analyzed.
基金This work was supported bythe National Natural Science Foundation of China(No.50306019,40375010,10471110,10471109).
文摘In this article a new principle of geometric design for blade's surface of an impeller is provided.This is an optimal control problem for the boundary geometric shape of flow and the control variable is the surface of the blade.We give a minimal functional depending on the geometry of the blade's surface and such that the flow's loss achieves minimum.The existence of the solution of the optimal control problem is proved and the Euler-Lagrange equations for the surface of the blade are derived.In addition,under a new curvilinear coordinate system,the flow domain between the two blades becomes a fixed hexahedron,and the surface as a mapping from a bounded domain in R2 into R3,is explicitly appearing in the objective functional.The Navier-Stokes equations,which include the mapping in their coefficients,can be computed by using operator splitting algorithm.Furthermore,derivatives of the solution of Navier-Stokes equations with respect to the mapping satisfy linearized Navier-Stokes equations which can be solved by using operator splitting algorithms too.Hence,a conjugate gradient method can be used to solve the optimal control problem.
文摘Film cooling is introduction of a secondary fluid （coolant or injected fluid） at one or more discrete locations along a surface exposed to a high temperature environment to protect that surface not only in the immediate region of injection but also downstream region. This paper numerically investigated the film cooling effectiveness on two types of hole geometries which are cut-shaped hole and antivortex hole. The 3D computational geometries are modeled with a single 30 deg angled hole on a flat surface. The different blowing ratios of 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5,5 and k-Epsilon turbulence model are used in this study. A two dimensional distribution of film cooling effectiveness in the downstream region of the cooling hole is performed. A comparison of spanwise averaged effectiveness is also performed in the field starts from center point of hole to X/D=-30.
