The behavior of resistance high-g impact of EMC （epoxy molding compound） with two package models, small outline package （POS） and Globtop, was evaluated by experimental method used Hopkinson bar. At 120,000 g （ge...The behavior of resistance high-g impact of EMC （epoxy molding compound） with two package models, small outline package （POS） and Globtop, was evaluated by experimental method used Hopkinson bar. At 120,000 g （generated in the Hopkinson bar with widths about 70 μs） no damage in either the POS devices or the Globtop devices was observed. In order to enhance the EMC＇s ability of resistance high-g impact, buffering effect of epoxy resin was also studied. The experimental results above all show that EMC has a better performance of impact resistance at about 120,000 g, and epoxy resin can absorb the stress wave to have the protected ability. The study of this paper could serve as a basis for selection packaging materials and enhance its reliability in high-g impact environment.展开更多
Low pressure sheet molding compound （LPMC,1.0-3.0 MPa,95-103 ℃） is a new kind of thermosetting material with crystalline polyester as a physical thickenner.LPMC is different from conventional SMC using an earth oxi...Low pressure sheet molding compound （LPMC,1.0-3.0 MPa,95-103 ℃） is a new kind of thermosetting material with crystalline polyester as a physical thickenner.LPMC is different from conventional SMC using an earth oxide thickening agent （e.g.MgO） as chemical thickenner,it relies on the physical thickening of crystalline polyester.Crystalline polyester resin is the key material to mold LPMC parts.Currently there was no report about the thickening mechanism of crystalline polyester in LPMC.In this article,crystalline polyester resins,whose melting points were between 45 ℃ and 89 ℃,were synthesized by a two-step esterification.The melt points of crystalline polyesters are controlled by regulating the mol ratio of the two glycols and the two acids.And by means of varying the content of crystalline polyester resin,the thickening effect on resin paste is investigated.In addition,the thickening mechanism of crystalline polyester in LPMC was investigated by FTIR and DSC analysis.The effects of the diameters and viscosity of crystalline polyester on the rheological property and fiber distribution of LPMC sheets were studied,too.Results show that the thickening effect is excellent when the weight content of crystalline polyester resin is 3%.And there exists three kinds of functions acting in the process of thickening：swelling,hydrogen bonds and induction crystallization.During the preparing process of resin paste in LPMC,the temperature of resin paste must be kept at 90 ℃.In addition,crystalline polyester make LPMC have a perfect fluid property.When the viscosity of LPMC sheet is beyond 1 kPa s,the fiber orientation is not obvious.But when the viscosity of LPMC sheet is about 500 Pa s,the fiber shows a certain degree of orientation.Moreover the study of physical and chemical thickening mechanism of crystalline polyester and the rheological discipline of LPMC sheets in the hot mould will provide the researchers and enterprises with theory guidance.展开更多
Based on generalized Hele-Shaw (GHS) model, a numerical simulation of phenolic sheet molding compound (P-SMC) in compression molding is realized by finite element step-by-step computing method. Finite elemental comput...Based on generalized Hele-Shaw (GHS) model, a numerical simulation of phenolic sheet molding compound (P-SMC) in compression molding is realized by finite element step-by-step computing method. Finite elemental computing and post analysis programs have been written. The compression mold filling process, time and pressure requirements of P-SMC in a closed mold are predicted, and a good agreement is shown when compared with experiments. It will be of theoretical significance for the mold design and the optimization of the technological parameters in the compression molding of sheet molding compound.展开更多
Reference materials for quantitative determination of regulated heavy metals, such as Pb and Cd in electronic components, were designed and investigated in terms of stability and homogeneity. Reference materials with ...Reference materials for quantitative determination of regulated heavy metals, such as Pb and Cd in electronic components, were designed and investigated in terms of stability and homogeneity. Reference materials with two concentration levels of heavy metals were prepared by spiking Pb and Cd compounds to epoxy molding compounds made by mixing silica powders and epoxy resin. The concentration changes of the reference materials during stability test for 1 a were not observed. In the homogeneity assessment, the as-prepared reference materials were studied by using three different analytical tools, inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluoroescence spectrometry (XRF) and laser ablation ICP mass. The results show different homogeneities by the characteristics of analytical tools and the materials.展开更多
基金Funded by the State Key Laboratory Foundation of China (No.9140C120704060C12)the Science and Technology Development Project of Universiti-esin of Shanxi Province
文摘The behavior of resistance high-g impact of EMC （epoxy molding compound） with two package models, small outline package （POS） and Globtop, was evaluated by experimental method used Hopkinson bar. At 120,000 g （generated in the Hopkinson bar with widths about 70 μs） no damage in either the POS devices or the Globtop devices was observed. In order to enhance the EMC＇s ability of resistance high-g impact, buffering effect of epoxy resin was also studied. The experimental results above all show that EMC has a better performance of impact resistance at about 120,000 g, and epoxy resin can absorb the stress wave to have the protected ability. The study of this paper could serve as a basis for selection packaging materials and enhance its reliability in high-g impact environment.
基金supported by National Natural Science Foundation of China (Grant No. 50473013)National Hi-tech Research and Development Program of China (863 Program,Grant No. 2003AA333070)+1 种基金Hubei Provincial Natural Science Foundation of China (Grant No.2009CDA037)Researching Foundation of Hubei Automotive Industries Institute of China (Grant No. BK201001)
文摘Low pressure sheet molding compound （LPMC,1.0-3.0 MPa,95-103 ℃） is a new kind of thermosetting material with crystalline polyester as a physical thickenner.LPMC is different from conventional SMC using an earth oxide thickening agent （e.g.MgO） as chemical thickenner,it relies on the physical thickening of crystalline polyester.Crystalline polyester resin is the key material to mold LPMC parts.Currently there was no report about the thickening mechanism of crystalline polyester in LPMC.In this article,crystalline polyester resins,whose melting points were between 45 ℃ and 89 ℃,were synthesized by a two-step esterification.The melt points of crystalline polyesters are controlled by regulating the mol ratio of the two glycols and the two acids.And by means of varying the content of crystalline polyester resin,the thickening effect on resin paste is investigated.In addition,the thickening mechanism of crystalline polyester in LPMC was investigated by FTIR and DSC analysis.The effects of the diameters and viscosity of crystalline polyester on the rheological property and fiber distribution of LPMC sheets were studied,too.Results show that the thickening effect is excellent when the weight content of crystalline polyester resin is 3%.And there exists three kinds of functions acting in the process of thickening：swelling,hydrogen bonds and induction crystallization.During the preparing process of resin paste in LPMC,the temperature of resin paste must be kept at 90 ℃.In addition,crystalline polyester make LPMC have a perfect fluid property.When the viscosity of LPMC sheet is beyond 1 kPa s,the fiber orientation is not obvious.But when the viscosity of LPMC sheet is about 500 Pa s,the fiber shows a certain degree of orientation.Moreover the study of physical and chemical thickening mechanism of crystalline polyester and the rheological discipline of LPMC sheets in the hot mould will provide the researchers and enterprises with theory guidance.
文摘Based on generalized Hele-Shaw (GHS) model, a numerical simulation of phenolic sheet molding compound (P-SMC) in compression molding is realized by finite element step-by-step computing method. Finite elemental computing and post analysis programs have been written. The compression mold filling process, time and pressure requirements of P-SMC in a closed mold are predicted, and a good agreement is shown when compared with experiments. It will be of theoretical significance for the mold design and the optimization of the technological parameters in the compression molding of sheet molding compound.
基金Project(2010-0008-276) supported by NCRC (National Core Research Center) program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology
文摘Reference materials for quantitative determination of regulated heavy metals, such as Pb and Cd in electronic components, were designed and investigated in terms of stability and homogeneity. Reference materials with two concentration levels of heavy metals were prepared by spiking Pb and Cd compounds to epoxy molding compounds made by mixing silica powders and epoxy resin. The concentration changes of the reference materials during stability test for 1 a were not observed. In the homogeneity assessment, the as-prepared reference materials were studied by using three different analytical tools, inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluoroescence spectrometry (XRF) and laser ablation ICP mass. The results show different homogeneities by the characteristics of analytical tools and the materials.
