In this study, the relationship between hearth wall erosion and deadman permeability was investigated based on the change in the hearth bottom and hearth sidewall temperatures. Additionally, the operation practice for...In this study, the relationship between hearth wall erosion and deadman permeability was investigated based on the change in the hearth bottom and hearth sidewall temperatures. Additionally, the operation practice for controlling hearth wall erosion in the large No. 1 blast furnace at Baosteel was also investigated. The reasons for the decrease in the permeability of deadman coke were analyzed, and measures for improving the permeability of deadman coke and controlling hearth wall temperature rising were described. The results show that a decrease in deadman coke permeability is the main reason for refractory temperature increase and hearth wall erosion. This indicates the importance of monitoring changes in hearth working conditions and taking appropriate measures to maintain sufficient permeability of the deadman and balance the hot metal flow and drainage of slag. At this rate, the decline in the hearth bottom temperature and fast rising of the hearth wall temperature can be restrained.展开更多
A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast...A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast furnace taphole level when a certain amount of titanium-bearing burden was used. Samples of the protective layer were extracted to identify the chemical composition, phase assemblage, andistribution. Furthermore, the formation mechanism of the protective layer was determined after clarifying the source of each componenFinally, a technical strategy was proposed for achieving a stable protective layer in the hearth. The results show that the protective layemainly exists in a bilayer form in the sidewall, namely, a titanium-bearing layer and a graphite layer. Both the layers contain the slag phaswhose major crystalline phase is magnesium melilite（Ca2Mg Si2O7） and the main source of the slag phase is coke ash. It is clearly determinethat solid particles such as graphite, Ti（C,N） and Mg Al2O4play an important role in the formation of the protective layer, and the key factofor promoting the formation of a stable protective layer is reasonable control of the evolution behavior of coke.展开更多
A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estim...A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estimate the formation mechanism of the protective layer. The results illustrate that a significant amount of graphite phase was trapped within the hearth protective layer. Furthermore, on the basis of the thermodynamic and kinetic calculations of the graphite precipitation process, a precipitation potential index related to the formation of the graphite-rich protective layer was proposed to characterize the formation ability of this layer. We determined that, under normal operating conditions, the precipitation of graphite phase ~om hot metal was thermodynamically possible. Among elements that exist in hot metal, C, Si, and P favor graphite precipitation, whereas Mn and Cr inhibit this process. Moreover, at the same hot-face temperature, an increase of carbon concentration in hot metal can shorten the precipitation time. Finally, the results suggest that measures such as reducing the hot-face tem- perature and increasing the degree of carbon saturation in hot metal are critically important to improve the precipitation potential index.展开更多
文摘In this study, the relationship between hearth wall erosion and deadman permeability was investigated based on the change in the hearth bottom and hearth sidewall temperatures. Additionally, the operation practice for controlling hearth wall erosion in the large No. 1 blast furnace at Baosteel was also investigated. The reasons for the decrease in the permeability of deadman coke were analyzed, and measures for improving the permeability of deadman coke and controlling hearth wall temperature rising were described. The results show that a decrease in deadman coke permeability is the main reason for refractory temperature increase and hearth wall erosion. This indicates the importance of monitoring changes in hearth working conditions and taking appropriate measures to maintain sufficient permeability of the deadman and balance the hot metal flow and drainage of slag. At this rate, the decline in the hearth bottom temperature and fast rising of the hearth wall temperature can be restrained.
基金financially supported by the Natural Science Foundation of China(No.51304014)the Natural Science Foundation of China and Baosteel(No.51134008)the National Basic Research Program of China(No.2012CB720401)
文摘A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast furnace taphole level when a certain amount of titanium-bearing burden was used. Samples of the protective layer were extracted to identify the chemical composition, phase assemblage, andistribution. Furthermore, the formation mechanism of the protective layer was determined after clarifying the source of each componenFinally, a technical strategy was proposed for achieving a stable protective layer in the hearth. The results show that the protective layemainly exists in a bilayer form in the sidewall, namely, a titanium-bearing layer and a graphite layer. Both the layers contain the slag phaswhose major crystalline phase is magnesium melilite（Ca2Mg Si2O7） and the main source of the slag phase is coke ash. It is clearly determinethat solid particles such as graphite, Ti（C,N） and Mg Al2O4play an important role in the formation of the protective layer, and the key factofor promoting the formation of a stable protective layer is reasonable control of the evolution behavior of coke.
基金supported the National Science Foundation for Young Scientists of China (No. 51304014)the Open Foundation of the State Key Laboratory of Advanced Metallurgy (No. 41603007)
文摘A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estimate the formation mechanism of the protective layer. The results illustrate that a significant amount of graphite phase was trapped within the hearth protective layer. Furthermore, on the basis of the thermodynamic and kinetic calculations of the graphite precipitation process, a precipitation potential index related to the formation of the graphite-rich protective layer was proposed to characterize the formation ability of this layer. We determined that, under normal operating conditions, the precipitation of graphite phase ~om hot metal was thermodynamically possible. Among elements that exist in hot metal, C, Si, and P favor graphite precipitation, whereas Mn and Cr inhibit this process. Moreover, at the same hot-face temperature, an increase of carbon concentration in hot metal can shorten the precipitation time. Finally, the results suggest that measures such as reducing the hot-face tem- perature and increasing the degree of carbon saturation in hot metal are critically important to improve the precipitation potential index.
