Ultrafine polypropylene fibers are prepared frompolypropylene/easily hydro - degraded polyester （PP/EHDPET） blend fibers, in which file EHDPET compo-nent is degradable by treating with NaOH - H<sub>2</sub&g...Ultrafine polypropylene fibers are prepared frompolypropylene/easily hydro - degraded polyester （PP/EHDPET） blend fibers, in which file EHDPET compo-nent is degradable by treating with NaOH - H<sub>2</sub>O solu-tion. We investigated the morphology of PP/EHDPETblend fibers before and after stretching and alkalinehydrolysis. Then thermal behavior of the blend has alsobeen studied.展开更多
Polypropylene superfine fibers or cell porous fibers were prepared from the bi-component blend fibers of polypropylene/easlly hydro-degraded polyester(PP/EHDPET)by alkaline hydrolysis process. EHDPET is a kind of copo...Polypropylene superfine fibers or cell porous fibers were prepared from the bi-component blend fibers of polypropylene/easlly hydro-degraded polyester(PP/EHDPET)by alkaline hydrolysis process. EHDPET is a kind of copolyester that can be rapidly hydro-degraded in the hot alkaline solution. This paper discussed the kinetics of alkaline hydrolysis of EHDPET, and the effect of catalyst, bulk ratio and the content of polypropylene grafted maleic anhydride (PP-g-MAH) on the alkaline hydrolysis process. Meanwhile, the morphological change of the outer surface of blend fibers during this process was also investigated by the technology of scanning electron microscope (SEM).展开更多
Cation Dyeable Polyester(CDP)was made by copolymerizing dimethyl terephthalate(DMT),S-sodium sulfonate dimethyl isophthalate(SIPM) with a weight fraction of 4.5% and ethyleneglycol (EG).Blend of PET and CDP was spun i...Cation Dyeable Polyester(CDP)was made by copolymerizing dimethyl terephthalate(DMT),S-sodium sulfonate dimethyl isophthalate(SIPM) with a weight fraction of 4.5% and ethyleneglycol (EG).Blend of PET and CDP was spun into hollow fiber.The fiber was then treated withaqueous NaOH.In this paper,kinetics and mechanism of alkaline hydrolysis of PET,CDP andtheir blend PET/CDP fiber were studied by means of specific area measurement,scantling elec-tron microscopy and other chemical analyses.It was showed that the rate of alkaline hydrolysis isCDP】PET/CDP】PET.Because of blending effect,the alkaline hydrolysis of PET/CDP is dif-ferent from that of PET.CDP phase in the PET/CDP fiber is predominantly hydrolyzed,andhence some pieces of fiber(micro-fiber) fall off the fiber because of etching.展开更多
Utilization of polyvinylidene difluoride, PVDF, as the disperse phase and thermal plastic polyurethane, PU, as the continuous phase, the PU/PVDF blend hollow fiber membranes with the property of pressure-responsibilit...Utilization of polyvinylidene difluoride, PVDF, as the disperse phase and thermal plastic polyurethane, PU, as the continuous phase, the PU/PVDF blend hollow fiber membranes with the property of pressure-responsibility, PR, was prepared by melt-spinning. For these hollow fibers, the formation of the interfacial micro-voids, IFM, and the spinability of the blend were analyzed. The pressure-responsibility was studied by measuring the changing of pure water flux, PWF, with the pressure, and the influence of drawing and heat-setting on the structure and pressure-responsibility of the membranes were also discussed.展开更多
Some modifications of two-constant Kubelka-Munk theory has been made for the color matching of pre-colored fiber blends. The scattering coefficients of three primaries are averaged and taken as initial coefficients in...Some modifications of two-constant Kubelka-Munk theory has been made for the color matching of pre-colored fiber blends. The scattering coefficients of three primaries are averaged and taken as initial coefficients in each wavelength. The unit sums of concentration in E-Allen’s Algorithm were removed in the case of pre-colored fiber blends. Predicted blend ratios and reflectance curves agree very well with measured ones and color differences are within the tolerant limit, showing satisfactory matching results.展开更多
Hydrophilic poly(vinyl butyral)(PVB) /Pluronic F127(F127) blend hollow fiber membranes were prepared via thermally induced phase separation(TIPS) ,and the effects of blend composition on the performance of hydrophilic...Hydrophilic poly(vinyl butyral)(PVB) /Pluronic F127(F127) blend hollow fiber membranes were prepared via thermally induced phase separation(TIPS) ,and the effects of blend composition on the performance of hydrophilic PVB/F127 blend hollow fiber membrane were investigated.The addition of F127 to PVB/polyethylene glycol(PEG) system decreases the cloud point temperature,while the cloud point temperature increases slightly with the addition of F127 to 20%(by mass) PVB/F127/PEG200 system when the concentration of F127 is not higher than 5%(by mass) .Light scattering results show that the initial inter-phase periodic distance formed from the phase separation of 20%(by mass) PVB/F127/PEG200 system decreases with the addition of F127,so does the growth rate during cooling process.The blend hollow fiber membrane prepared at air-gap 5mm,of which the water permeability increases and the rejection changes little with the increase of F127 concentration.For the membrane prepared at zero air-gap,both water permeability and rejection of the PVB/F127 blend membrane are greater than those of PVB membrane,while the tensile strength changes little.Elementary analysis shows that most F127 in the polymer solution can firmly exist in the polymer matrix,increasing the hydrophilicity of the blend membrane prepared at air-gap of 5mm.展开更多
Based on results of single factor experiments,analytical levels for three additives were established and experimental scheme was designed by central composite of response surface methodology(RSM) with the software of ...Based on results of single factor experiments,analytical levels for three additives were established and experimental scheme was designed by central composite of response surface methodology(RSM) with the software of Design-Expert 7.1.6.Funnily,we got the SA-CS blending fiber with a strength of 13.56 cN/tex,should be spun at the conditiongs as follows: The mass dosage of SA to the polysaccharide was 48.89%,the temperature of the water bath was 58.57℃,and the response time was 29.31 minutes.,and in the predict model,the result shows as 13.5688cN/tex,compared the later with the former,it has the error of 0.064%.展开更多
The fiber properties of modacrylic fibers with silk protein and spinning technology for blended knitting yarns are studied. By testing the fiber properties, fiber spinnability is analysed. Modacrylic fibers with silk ...The fiber properties of modacrylic fibers with silk protein and spinning technology for blended knitting yarns are studied. By testing the fiber properties, fiber spinnability is analysed. Modacrylic fibers with silk protein are brittle and have poor cohesion, so the key to process modacrylic fibers with silk protein lies in forming lap and sliver. During opening and carding, low speed is used to decrease fiber damage and the proper static resistant oil is applied to eliminate lapping fibers. Besides, the temperature and relative humidity have to be strictly controlled. The applications of modacrylic fibers with silk protein are also put forward.展开更多
The PLA fiber is one of the green fibers.It is blended with Tencel fibers.The strength of the PLA fiber/Tencel blended yarn is tested.The relationship between the strength and the twist factor and the blended ratio is...The PLA fiber is one of the green fibers.It is blended with Tencel fibers.The strength of the PLA fiber/Tencel blended yarn is tested.The relationship between the strength and the twist factor and the blended ratio is analyzed.The optimum blended ratio of the blended yarn is determined.展开更多
In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data wa...In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data was analysed, and the regression curves were obtained bystepwise regression method. It was pointed out that the testing errors of both methods were lessthan two percent. The validities of both methods were verified by experiments, All calculationsof both methods were completed by computer. The blending ratio was ascertained from the test-ing data of bundle fiber strength tester which was made by the authors themselves.展开更多
Based on the analysis of the properties of Nomex 450 and Nomex 462,the thermal properties of Nomex 462/Lenzing Viscose Flame retardent(FR)blending materials were analyzed.It was discovered through burning test and The...Based on the analysis of the properties of Nomex 450 and Nomex 462,the thermal properties of Nomex 462/Lenzing Viscose Flame retardent(FR)blending materials were analyzed.It was discovered through burning test and Thermal Gravity(TG)analysis that the blended material was superior in thermal behaviors to the material made from either Nomex or Viscose FR filament,when the ratio of Nomex and Lenzing Viscose FR reached 80∶20,and excellent thermal properties were achieved with the value of Limiting Oxygen Index(LOI)up to 36.1%.Blending Nomex and Viscose FR filaments may be recommended for better fire retardant property of related fabric.展开更多
文摘Ultrafine polypropylene fibers are prepared frompolypropylene/easily hydro - degraded polyester （PP/EHDPET） blend fibers, in which file EHDPET compo-nent is degradable by treating with NaOH - H<sub>2</sub>O solu-tion. We investigated the morphology of PP/EHDPETblend fibers before and after stretching and alkalinehydrolysis. Then thermal behavior of the blend has alsobeen studied.
文摘Polypropylene superfine fibers or cell porous fibers were prepared from the bi-component blend fibers of polypropylene/easlly hydro-degraded polyester(PP/EHDPET)by alkaline hydrolysis process. EHDPET is a kind of copolyester that can be rapidly hydro-degraded in the hot alkaline solution. This paper discussed the kinetics of alkaline hydrolysis of EHDPET, and the effect of catalyst, bulk ratio and the content of polypropylene grafted maleic anhydride (PP-g-MAH) on the alkaline hydrolysis process. Meanwhile, the morphological change of the outer surface of blend fibers during this process was also investigated by the technology of scanning electron microscope (SEM).
文摘Cation Dyeable Polyester(CDP)was made by copolymerizing dimethyl terephthalate(DMT),S-sodium sulfonate dimethyl isophthalate(SIPM) with a weight fraction of 4.5% and ethyleneglycol (EG).Blend of PET and CDP was spun into hollow fiber.The fiber was then treated withaqueous NaOH.In this paper,kinetics and mechanism of alkaline hydrolysis of PET,CDP andtheir blend PET/CDP fiber were studied by means of specific area measurement,scantling elec-tron microscopy and other chemical analyses.It was showed that the rate of alkaline hydrolysis isCDP】PET/CDP】PET.Because of blending effect,the alkaline hydrolysis of PET/CDP is dif-ferent from that of PET.CDP phase in the PET/CDP fiber is predominantly hydrolyzed,andhence some pieces of fiber(micro-fiber) fall off the fiber because of etching.
基金This workis supported by the Science and Technology Development Project (Grant No.2004BA304B05-03) of the Chinese Ministry ofScience and Technology .
基金Supported by the Fund of Ministry of Education (No.20040058002) and the Fund of Science Council of Tianjin (No.043102711)
文摘Utilization of polyvinylidene difluoride, PVDF, as the disperse phase and thermal plastic polyurethane, PU, as the continuous phase, the PU/PVDF blend hollow fiber membranes with the property of pressure-responsibility, PR, was prepared by melt-spinning. For these hollow fibers, the formation of the interfacial micro-voids, IFM, and the spinability of the blend were analyzed. The pressure-responsibility was studied by measuring the changing of pure water flux, PWF, with the pressure, and the influence of drawing and heat-setting on the structure and pressure-responsibility of the membranes were also discussed.
文摘Some modifications of two-constant Kubelka-Munk theory has been made for the color matching of pre-colored fiber blends. The scattering coefficients of three primaries are averaged and taken as initial coefficients in each wavelength. The unit sums of concentration in E-Allen’s Algorithm were removed in the case of pre-colored fiber blends. Predicted blend ratios and reflectance curves agree very well with measured ones and color differences are within the tolerant limit, showing satisfactory matching results.
基金Supported by the National Natural Science Foundation of China（20776161）
文摘Hydrophilic poly(vinyl butyral)(PVB) /Pluronic F127(F127) blend hollow fiber membranes were prepared via thermally induced phase separation(TIPS) ,and the effects of blend composition on the performance of hydrophilic PVB/F127 blend hollow fiber membrane were investigated.The addition of F127 to PVB/polyethylene glycol(PEG) system decreases the cloud point temperature,while the cloud point temperature increases slightly with the addition of F127 to 20%(by mass) PVB/F127/PEG200 system when the concentration of F127 is not higher than 5%(by mass) .Light scattering results show that the initial inter-phase periodic distance formed from the phase separation of 20%(by mass) PVB/F127/PEG200 system decreases with the addition of F127,so does the growth rate during cooling process.The blend hollow fiber membrane prepared at air-gap 5mm,of which the water permeability increases and the rejection changes little with the increase of F127 concentration.For the membrane prepared at zero air-gap,both water permeability and rejection of the PVB/F127 blend membrane are greater than those of PVB membrane,while the tensile strength changes little.Elementary analysis shows that most F127 in the polymer solution can firmly exist in the polymer matrix,increasing the hydrophilicity of the blend membrane prepared at air-gap of 5mm.
文摘Based on results of single factor experiments,analytical levels for three additives were established and experimental scheme was designed by central composite of response surface methodology(RSM) with the software of Design-Expert 7.1.6.Funnily,we got the SA-CS blending fiber with a strength of 13.56 cN/tex,should be spun at the conditiongs as follows: The mass dosage of SA to the polysaccharide was 48.89%,the temperature of the water bath was 58.57℃,and the response time was 29.31 minutes.,and in the predict model,the result shows as 13.5688cN/tex,compared the later with the former,it has the error of 0.064%.
文摘The fiber properties of modacrylic fibers with silk protein and spinning technology for blended knitting yarns are studied. By testing the fiber properties, fiber spinnability is analysed. Modacrylic fibers with silk protein are brittle and have poor cohesion, so the key to process modacrylic fibers with silk protein lies in forming lap and sliver. During opening and carding, low speed is used to decrease fiber damage and the proper static resistant oil is applied to eliminate lapping fibers. Besides, the temperature and relative humidity have to be strictly controlled. The applications of modacrylic fibers with silk protein are also put forward.
文摘The PLA fiber is one of the green fibers.It is blended with Tencel fibers.The strength of the PLA fiber/Tencel blended yarn is tested.The relationship between the strength and the twist factor and the blended ratio is analyzed.The optimum blended ratio of the blended yarn is determined.
文摘In this paper, two methods were developed to assess the blending ratio of two-componentfiber bundles. They were the peak-height method and the slope method. The relationship be-tween blending ratio and testing data was analysed, and the regression curves were obtained bystepwise regression method. It was pointed out that the testing errors of both methods were lessthan two percent. The validities of both methods were verified by experiments, All calculationsof both methods were completed by computer. The blending ratio was ascertained from the test-ing data of bundle fiber strength tester which was made by the authors themselves.
文摘Based on the analysis of the properties of Nomex 450 and Nomex 462,the thermal properties of Nomex 462/Lenzing Viscose Flame retardent(FR)blending materials were analyzed.It was discovered through burning test and Thermal Gravity(TG)analysis that the blended material was superior in thermal behaviors to the material made from either Nomex or Viscose FR filament,when the ratio of Nomex and Lenzing Viscose FR reached 80∶20,and excellent thermal properties were achieved with the value of Limiting Oxygen Index(LOI)up to 36.1%.Blending Nomex and Viscose FR filaments may be recommended for better fire retardant property of related fabric.
